1
0
mirror of git://sourceware.org/git/lvm2.git synced 2024-12-30 17:18:21 +03:00
Commit Graph

1548 Commits

Author SHA1 Message Date
David Teigland
c016b573ee clvmd: separate saved_vg from vginfo
The clvmd saved_vg data is independent from the normal lvm
lvmcache vginfo data, so separate saved_vg from vginfo.
Normal lvm doesn't need to use save_vg at all, and in clvmd,
lvmcache changes on vginfo can be made without worrying
about unwanted effects on saved_vg.
2018-05-03 14:54:48 -05:00
Joe Thornber
972b535220 build: add -D_FILE_OFFSET_BITS=64
I don't like having this in a common header because it means you end
up including too much and causing unneccessary dependencies.  eg,
lib/misc/lib.h includes libdevmapper.h, internationalisation, and
logging stuff.
2018-05-02 18:40:38 +01:00
David Teigland
c1cd18f21e Remove lvm1 and pool disk formats
There are likely more bits of code that can be removed,
e.g. lvm1/pool-specific bits of code that were identified
using FMT flags.

The vgconvert command can likely be reduced further.

The lvm1-specific config settings should probably have
some other fields set for proper deprecation.
2018-04-30 16:55:02 -05:00
Joe Thornber
1ddbbb67e0 build: fix typo in dmeventd/plugins/Makefile.in 2018-04-30 15:31:57 +01:00
Joe Thornber
2bc896f2a3 build: remove --with-{snapshots,mirrors,raid,thin,cache} options from ./configure
It now behaves as if the were all set as 'internal'
2018-04-30 10:11:23 +01:00
David Teigland
4670e9f698 skip some clvmd-specific code in common cases
This, or something like it, can probably be done
in many other places.
2018-04-25 16:40:08 -05:00
David Teigland
9b6a62f944 lvmcache: simplify
Recent changes allow some major simplification of the way
lvmcache works and is used.  lvmcache_label_scan is now
called in a controlled fashion at the start of commands,
and not via various unpredictable side effects.  Remove
various calls to it from other places.  lvmcache_label_scan
should not be called from anywhere during a command, because
it produces an incorrect representation of PVs with no MDAs,
and misclassifies them as orphans.  This has been a long
standing problem.  The invalid flag and rescanning based on
that is no longer used and removed.  The 'force' variation is
no longer needed and removed.
2018-04-20 11:22:48 -05:00
David Teigland
c0973e70a5 dev_cache: clean up scan
Pull out all of the twisted logic and simply call dev_cache_scan
at the start of the command prior to label scan.
2018-04-20 11:22:48 -05:00
David Teigland
ddb5de7a98 clvm: fix bcache scan handling
We can't let clvmd keep all scanned devs open,
which prevents them from being removed.  So
drop the bcache data (and close fds) affter
doing a label scan.

Also set up bcache before the clvm-specific
vg_read (which needs to rescan the vg's devs
using bcache) and destroy the bcache after.
2018-04-20 11:22:48 -05:00
David Teigland
697fa7aa1d [makefile] add -laio to makefiles 2018-04-20 11:13:17 -05:00
Zdenek Kabelac
fa5ba7e42d coverity: ensure 0 end string
Use dm_strncpy() to enusure string ends with '\0'.
In case uuid does not fit, report error.
2018-04-20 12:17:01 +02:00
Zdenek Kabelac
037c234eaa cleanup: avoid compiler warn
When variable is unused...
2018-04-20 12:17:01 +02:00
Zdenek Kabelac
c82ab92d04 cleanup: use zalloc
Replace malloc() + memset()   with zalloc().
2018-03-17 23:33:58 +01:00
Zdenek Kabelac
5c40e81a7e cleanup: use direct initializer 2018-03-17 23:33:58 +01:00
Zdenek Kabelac
b4c69320fc coverity: move declaration out of the loop
Move declaration of count counter outside the while loop.
2018-03-17 23:33:58 +01:00
Zdenek Kabelac
26c58027fb coverity: validate descriptor
Since this function is called with 'fd == -1', but Coverity can't see
this path can't be visited with this argument, add explicit check for
valid descriptor.
2018-03-17 23:33:58 +01:00
Zdenek Kabelac
b6e7a0b490 cleanup: more usage of dm_strncpy
Use existing wrapper function arournd  strncpy + buf[] = 0;
2018-03-06 15:40:34 +01:00
Zdenek Kabelac
9be086fbee thin: pass environment to scripts
When dmeventd thin plugin forks a configurable script, switch to use
execvp to pass whole environment present to dmeventd - so all configured
paths present at dmeventd startup are visible to script.

This was likely not a problem for common user enviroment,
however in test suite case variable like LVM_SYSTEM_DIR were
not actually used from test itself but rather from
a system present lvm.conf and this may have cause strange
behavior of a testing script.
2018-03-06 15:35:04 +01:00
Zdenek Kabelac
9bfc8881cb coverity: missing free on error path 2018-02-28 21:05:18 +01:00
Zdenek Kabelac
e87fa7c9ce sanlock: set proper return value
In last patch one error path missed to assign correct return value.
Assing it directly to 'ret' as log_error was already reported.
2018-02-19 16:44:10 +01:00
Zdenek Kabelac
d90a647802 activation: separate reporting of error and monitoring status
Avoid using same return code for reporting 2 different things
and stricly report error code by return value and add new
parameter for reporting monitoring status.

This makes easier to recognize which error we got from dm_event
and continue only with  ENOENT.
2018-02-12 22:14:59 +01:00
Zdenek Kabelac
4f278324c7 lvmlockd: improve dm path creation for sanlock LV
Use devmapper function to create matching dm name with mangling.
Drop extra '-1' from buffer passed to snprintf.
2018-02-12 22:14:25 +01:00
Zdenek Kabelac
7239a45b79 clean: drop unneeded -1 for snprintf
man gives:
snprintf() and vsnprintf() write at most size bytes
(including the terminating null byte ('\0')) to str.
2018-02-12 22:14:25 +01:00
Tim Foerster
34fb5202bd lvmdbusd: Remove duplicated DataPercent definition 2018-01-25 08:37:24 -06:00
Zdenek Kabelac
f41935909f dmeventd: add check for result code
Check result from pthread_kill.
2018-01-17 14:44:33 +01:00
Marian Csontos
c957d46f1d lvmdbusd: Make lvmdbusd executable
- Add files built from *.in to builddir files.
- Add all files built from *.in to DISTCLEAN_TARGETS.
2017-12-14 16:45:53 +01:00
Marian Csontos
7272fd2210 lvmdbusd: All tools use detected python3
- lvmdb.py and lvm_shell_proxy.py can be used as standalone tools, so
  should use detected value.
- clean executable bit on *.in files.
2017-12-12 13:17:07 +01:00
Marian Csontos
2aedc98242 lvmdbusd: Fix path to python3
lvmdbusd executable script must use python3 interpreter detected by
configure script, as site-packages directory used for library is only
used by that interpreter.
2017-12-11 12:36:54 +01:00
David Teigland
0f0f6978e7 lvmlock: return an error if lvb cannot be written
It doesn't make much difference, because if this happens,
it means there are other more significant problems.
2017-12-06 10:49:31 -06:00
David Teigland
46d6f7a639 lvmlockd: recognize normal errors from sanlock_convert
Don't log an error message for error values returned
by sanlock_convert for expected conditions like lock
contention or io timeouts.
2017-12-05 11:53:03 -06:00
David Teigland
bd893348b4 lvmlockd: avoid blocking in sanlock_convert
Use the same flag as sanlock_acquire() for the
same purpose.  sanlock_convert can block like
acquire when doing a sh to ex conversion.
2017-12-05 11:53:03 -06:00
Zdenek Kabelac
76954884c7 cleanup: drop unused define 2017-12-04 15:38:50 +01:00
David Teigland
bbaaf4f1d3 lvmlockd: override unknown lock manager error numbers
When sanlock or dlm lock managers return an error number
that we don't recognize, replace it with a generic -ELMERR
which is defined in the set of special lvmlockd error
numbers.  Otherwise, an unknown lock manager error number
could be misinterpreted for something else if it happened
to overlap another set of error numbers (which they have
not thus far.)
2017-11-17 10:59:12 -06:00
David Teigland
e52d2e3bd8 lvmlockd: retry on other sanlock errors
These less common errors returned from sanlock should
also cause sanlock to retry the lock acquire:

- i/o timeout occurs during sanlock_acquire().
  other i/o on the same disk as the leases can cause
  sanlock i/o timeouts.

- low level disk paxos contention between hosts naturally
  causes one host to not acquire the lease.  There are a
  couple special error numbers associated with these cases
  that should just be recognized as a normal failure to
  acquire the lease.
2017-11-17 10:59:12 -06:00
Zdenek Kabelac
0c9e3e8df2 coverity: add some initilizers
Coverity cannot do a deeper analyzis so let's make just reports
go away and initialize them to 0.
2017-11-07 21:26:11 +01:00
Eric Ren
14d0b0bbdd clvmd: supress ENOENT error on testing connection
In HA cluster, we have "clvm" resource agent to manage clvmd daemon.
The agent invokes clvmd like: "clvmd -T90 -d0", which  always prints
a scaring error message:

"""
local socket: connect failed: No such file or directory
"""

When specifed with "-d" option, clvmd tries to check if an instance
of the clvmd daemon is already running through a testing connection.
The connect() will fail with this ENOENT error in such case, so supress
the error message in such case.

TODO: add missing error reaction code - since ofter log_error, program
is not supposed to continue running (log_error() is for reporting
stopping problems).

Signed-off-by: Eric Ren <zren@suse.com>
2017-11-07 21:24:39 +01:00
David Teigland
1b319f39d6 lvmlockd: check error for sanlock access to lvmlock LV
When the sanlock daemon does not have permission to access
the lvmlock LV, make the error messages more helpful.
2017-10-17 13:45:53 -05:00
Zdenek Kabelac
9940c2f754 dmeventd: schedule exit on break
When dmeventd receives SIGTERM/INT/HUP/QUIT it validates if exit is possible.
If there was any device still monitored, such exit request used to
be ignored/refused. This 'usually' worked reasonably well, however if there
is very short time period between last device is unmonitored and signal
reception - there was possibility such EXIT was ignored, as dmeventd has
not yet got into idle state even commands like 'vgchange -an' has already
finished.

This patch changes logic towards scheduling EXIT to the nearest
point when there is no monitored device.

EXIT is never forgotten.

NOTE: if there is only a single monitored device and someone sends
SIGTERM and later someone uses i.e. 'lvchange --refresh' after
unmonitoring dmeventd will exit and new instance needs to be
started.
2017-10-05 10:19:21 +02:00
Tony Asleson
32c87d56b1 lvmdbusd: thread stacks dump support
If you send a SIGUSR1 (10) to the daemon it will dump all the
threads current stacks to stdout.  This will be useful when the
daemon is apparently hung and not processing requests.

eg.
$ sudo kill -10 <daemon pid>
2017-09-27 07:45:00 -05:00
Tony Asleson
60e3dbd6d5 lvmdbusd: Give threads names
This will allow easier debug.
2017-09-27 07:45:00 -05:00
Tony Asleson
2074094e77 lvmdbusd: Main thread exception logging
Make sure that any and all code that executes in the main thread is
wrapped with a try/except block to ensure that at the very least
we log when things are going wrong.
2017-09-27 07:45:00 -05:00
Tony Asleson
bdccab07f9 lvmdbusd: Improve args comparison 2017-09-21 14:35:36 -05:00
Tony Asleson
7a6e438df8 lvmdbusd: Ensure vg_uuid is present
In some cases we are seeing where there are no VGs, but the data returned from
lvm shows that the PVs have the following for the VG:

"vg_name":"[unknown]", "vg_uuid":""

The code was only checking for the exitence of the VG name and we called into
the function get_object_path_by_uuid_lvm_id which requires both the VG name and
the LV name to exist (asserts this) which results in the following stack trace:

Traceback (most recent call last):
  File "/home/tasleson/lvm2/daemons/lvmdbusd/utils.py", line 563, in runner
    obj._run()
  File "/home/tasleson/lvm2/daemons/lvmdbusd/utils.py", line 584, in _run
    self.rc = self.f(*self.args)
  File "/home/tasleson/lvm2/daemons/lvmdbusd/fetch.py", line 26, in
		_main_thread_load
    cache_refresh=False)[1]
  File "/home/tasleson/lvm2/daemons/lvmdbusd/pv.py", line 48, in load_pvs
    emit_signal, cache_refresh)
  File "/home/tasleson/lvm2/daemons/lvmdbusd/loader.py", line 37, in common
    objects = retrieve(search_keys, cache_refresh=False)
  File "/home/tasleson/lvm2/daemons/lvmdbusd/pv.py", line 40, in
		pvs_state_retrieve
    p["pv_attr"], p["pv_tags"], p["vg_name"], p["vg_uuid"]))
  File "/home/tasleson/lvm2/daemons/lvmdbusd/pv.py", line 84, in __init__
    vg_uuid, vg_name, vg_obj_path_generate)
  File "/home/tasleson/lvm2/daemons/lvmdbusd/objectmanager.py", line 318,
		in get_object_path_by_uuid_lvm_id
    assert uuid
AssertionError
2017-09-21 14:35:36 -05:00
Tony Asleson
e3965d392c lvmdbusd: Fix hang in MThreadRunner
When executing in the main thread, if we encounter an exception we
will bypass the notify_all call on the condition and the calling thread
never wakes up.

@staticmethod
    def runner(obj):
        # noinspection PyProtectedMember
Exception thrown here
 ----> obj._run()
So the following code doesn't run, which causes calling thread to hang
	with obj.cond:
            obj.function_complete = True
            obj.cond.notify_all()

Additionally for some unknown reason the stderr is lost.
Best guess is it's something to do with scheduling a python function
into the GLib.idle_add.  That made finding issue quite difficult.
2017-09-21 14:35:36 -05:00
Zdenek Kabelac
03efec2712 deamonize: restore detection of errors
Keep forked environment for daemon more strick and check even
for nearly impossible to happen errors.
2017-09-06 11:47:53 +02:00
David Teigland
09c792c206 lvmlockd: fix check for no running lock manager
In some cases it was reporting there was no running
lock manager when there is.
2017-08-29 15:18:12 -05:00
David Teigland
f847fcd31a lvmlockd: print error about starting lock manager
In the case where lvmlockd is running, but no lock manager
is running, we should print a specific error message about
that situation.
2017-08-28 16:24:00 -05:00
Zdenek Kabelac
c8fdc5c087 cleanup: easier to read code
Split into lines for better reading.
2017-08-25 14:20:59 +02:00
Zdenek Kabelac
d79d919329 lvmlockd: log pthread_join errno code
Log possible errno with pthread_join (and one close() instance).
2017-08-25 14:20:59 +02:00
Zdenek Kabelac
da9a8fdedc lvmlockctl: fix check for failing close
On  close() failure it's -1.
2017-08-25 14:20:59 +02:00