IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
When resizing thin pool - we need to use strip info from _tdata volume.
In future more generic solution will be necessary once we start to support
lvconvert (resize of stacked devices and stay properly aligned).
For now we just allow striped or linear LV so this code will work.
When given lvresize new size - round upward for stripes - unless we use % and
we are at the border of free extents.
This patch is not a complete fix and few more cases will need special care.
We want to keep this logic -
when LV is extend - extend the LV by at least given amount,
when LV is reduced - reduce the LV by at most given amount.
So for this the rounding needs to be used.
Current logic which seems to satisfy give rule is to round up all
extent values for LV resize upward except for values with '-' sign
that are round downward.
This patch also fixes the problem when lvextend --use-polices tried
to extend LV the by i.e. 20% - but the resulting 20% were smaller
the extent size thus before this patch no extension happened.
Always make sure table gets reloaded.
For now activate and deactivate pool volume if it's not active.
FIXME: we could do this only if we are sure some thin volume is alive.
This patch allows a mirror to be extended without an initial resync of the
extended portion. It compliments the existing '--nosync' option to lvcreate.
This action can be done implicitly if the mirror was created with the '--nosync'
option, or explicitly if the '--nosync' option is used when extending the device.
Here are the operational criteria:
1) A mirror created with '--nosync' should extend with 'nosync' implicitly
[EXAMPLE]# lvs vg; lvextend -L +5G vg/lv ; lvs vg
LV VG Attr LSize Pool Origin Snap% Move Log Copy% Convert
lv vg Mwi-a-m- 5.00g lv_mlog 100.00
Extending 2 mirror images.
Extending logical volume lv to 10.00 GiB
Logical volume lv successfully resized
LV VG Attr LSize Pool Origin Snap% Move Log Copy% Convert
lv vg Mwi-a-m- 10.00g lv_mlog 100.00
2) The 'M' attribute ('M' signifies a mirror created with '--nosync', while 'm'
signifies a mirror created w/o '--nosync') must be preserved when extending a
mirror created with '--nosync'. See #1 for example of 'M' attribute.
3) A mirror created without '--nosync' should extend with 'nosync' only when
'--nosync' is explicitly used when extending.
[EXAMPLE]# lvs vg; lvextend -L +5G vg/lv; lvs vg
LV VG Attr LSize Pool Origin Snap% Move Log Copy% Convert
lv vg mwi-a-m- 20.00m lv_mlog 100.00
Extending 2 mirror images.
Extending logical volume lv to 5.02 GiB
Logical volume lv successfully resized
LV VG Attr LSize Pool Origin Snap% Move Log Copy% Convert
lv vg mwi-a-m- 5.02g lv_mlog 0.39
vs.
[EXAMPLE]# lvs vg; lvextend -L +5G vg/lv --nosync; lvs vg
LV VG Attr LSize Pool Origin Snap% Move Log Copy% Convert
lv vg mwi-a-m- 20.00m lv_mlog 100.00
Extending 2 mirror images.
Extending logical volume lv to 5.02 GiB
Logical volume lv successfully resized
LV VG Attr LSize Pool Origin Snap% Move Log Copy% Convert
lv vg Mwi-a-m- 5.02g lv_mlog 100.00
4) The 'm' attribute must change to 'M' when extending a mirror created without
'--nosync' is extended with the '--nosync' option. (See #3 examples above.)
5) An inactive mirror's sync percent cannot be determined definitively, so it
must not be allowed to skip resync. Instead, the extend should ask the user if
they want to extend while performing a resync.
[EXAMPLE]# lvchange -an vg/lv
[EXAMPLE]# lvextend -L +5G vg/lv
Extending 2 mirror images.
Extending logical volume lv to 10.00 GiB
vg/lv is not active. Unable to get sync percent.
Do full resync of extended portion of vg/lv? [y/n]: y
Logical volume lv successfully resized
6) A mirror that is performing recovery (as opposed to an initial sync) - like
after a failure - is not allowed to extend with either an implicit or
explicit nosync option. [You can simulate this with a 'corelog' mirror because
when it is reactivated, it must be recovered every time.]
[EXAMPLE]# lvcreate -m1 -L 5G -n lv vg --nosync --corelog
WARNING: New mirror won't be synchronised. Don't read what you didn't write!
Logical volume "lv" created
[EXAMPLE]# lvs vg
LV VG Attr LSize Pool Origin Snap% Move Log Copy% Convert
lv vg Mwi-a-m- 5.00g 100.00
[EXAMPLE]# lvchange -an vg/lv; lvchange -ay vg/lv; lvs vg
LV VG Attr LSize Pool Origin Snap% Move Log Copy% Convert
lv vg Mwi-a-m- 5.00g 0.08
[EXAMPLE]# lvextend -L +5G vg/lv
Extending 2 mirror images.
Extending logical volume lv to 10.00 GiB
vg/lv cannot be extended while it is recovering.
7) If 'no' is selected in #5 or if the condition in #6 is hit, it should not
result in the mirror being resized or the 'm/M' attribute being changed.
NOTE: A mirror created with '--nosync' behaves differently than one created
without it when performing an extension. The former cannot be extended when
the mirror is recovering (unless in-active), while the latter can. This is
a reasonable thing to do since recovery of a mirror doesn't take long (at
least in the case of an on-disk log) and it would cause far more time in
degraded mode if the extension w/o '--nosync' was allowed. It might be
reasonable to add the ability to force the operation in the future. This
should /not/ force a nosync extension, but rather force a sync'ed extension.
IOW, the user would be saying, "Yes, yes... I know recovery won't take long
and that I'll be adding significantly to the time spent in degraded mode, but
I need the extra space right now!".
Move the free_vg() to vg.c and replace free_vg with release_vg
and make the _free_vg internal.
Patch is needed for sharing VG in vginfo cache so the release_vg function name
is a better fit here.
Patch adds check for stripe not only in direct
LV segment but also in mirror image segment.
This prevents bugs like:
# lvcreate -i2 -l10 -n lv vg_test
# lvconvert -m1 -i1 vg_test/lv
# lvreduce -f -l1 vg_test/lv
WARNING: Reducing active logical volume to 4.00 MiB
THIS MAY DESTROY YOUR DATA (filesystem etc.)
Reducing logical volume lv to 4.00 MiB
Segment extent reduction 9 not divisible by #stripes 2
Logical volume lv successfully resized
# lvremove -f vg_test
Segment extent reduction 1 not divisible by #stripes 2
LV segment lv:0-4294967295 is incorrectly listed as being used by LV lv_mimage_0
Internal error: LV segments corrupted in lv_mimage_0.
We should never remove more extents than requested by user,
so round up to next stripe boundary during lvreduce.
Also this fixes round to zero sized LV bug:
# lvcreate -i2 -I 64k -l10 -n lvs vg_test
# lvreduce -f -l1 vg_test/lvs
Rounding size (1 extents) down to stripe boundary size for segment (0 extents)
WARNING: Reducing active logical volume to 0
THIS MAY DESTROY YOUR DATA (filesystem etc.)
Reducing logical volume lvs to 0
Failed to suspend lvs
allows us to allocate all images of a mirror (or RAID array) at one
time during create.
The current mirror implementation still requires a separate allocation
for the log, however.
While STRIPE_SIZE_LIMIT * 2 is basically UINT_MAX, 32bit integer
value can already overflow durin arg size parsing.
(This really happens in test where --stripesize 4294967291 is used,
in s390x uint overflow and this test is ineffective.)
As sync_local_dev_names() cannot be called within activation context,
add new parametr which allows to select if the sync call is needed
before executing new command.
Patch updates exec_cmd() and adds 3rd parameter with pointer for
status value, so caller might examine returned status code.
If the passed pointer is NULL, behavior is unmodified.
Patch allows to confinue with lvresize if the failure from fsadm check is
caused by mounted filesystem as many of filesystem resize tools do support
online filesystem resize. (originally user had to use flag '-n' to bypass
this filesystem check)
to lvm.conf in the activation section: 'snapshot_autoextend_threshold' and
'snapshot_autoextend_percent', that define how to handle automatic snapshot
extension. The former defines when the snapshot should be extended: when its
space usage exceeds this many percent. The latter defines how much extra space
should be allocated for the snapshot, in percent of its current size.
Prevent lvresize from being able to resize internal LVs: mirror legs
(*_mimage_*), mirror log (*_mlog), snapshot placeholder LVs (snapshot*)
and others. Resizing these would leads to unexpected metadata and
sometimes crashes (in case of growing snapshot*).
Allow the number of logical extents to be expressed (for a snapshot) as
a percentage of the total space in the Origin Logical Volume with the
suffix %ORIGIN.
Update the relevant man pages accordingly. Eliminate inconsistencies
between the man pages and tools/commands.h
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
- fix missing unlocking of VG
lvcreate -l 100%PVS -n lv1 vg_test
Please specify physical volume(s) with %PVS
Internal error: Volume Group vg_test was not unlocked
- if no PVS specified, use all available
Fix segfault if %PVS in lvresize without PVs list.
Fix vg_read() error paths to properly release upon vg_read_error().
Note that in the iterator paths (process_each_*()), we release
inside the iterator so no individual cleanup is needed. However there
are a number of other places we missed the cleanup. Proper cleanup
when vg_read_error() is true should be calling vg_release(vg), since
there should be no locks held if we get an error (except in certain
special cases, which IMO we should work to remove from the code).
Unfortunately the testsuite is unable to detect these types of memory
leaks. Most of them can be easily seen if you try an operation
(e.g. lvcreate) with a volume group that does not exist. Error
message looks like this:
Volume group "vg2" not found
You have a memory leak (not released memory pool):
[0x1975eb8]
You have a memory leak (not released memory pool):
[0x1975eb8]
Author: Dave Wysochanski <dwysocha@redhat.com>
Sun May 3 11:40:51 CEST 2009 Petr Rockai <me@mornfall.net>
* Convert the straight instances of vg_lock_and_read to new vg_read(_for_update).
Rebased 6/26/09 by Dave W.
Sun May 3 11:40:51 CEST 2009 Petr Rockai <me@mornfall.net>
* Convert the straight instances of vg_lock_and_read to new vg_read(_for_update).
Author: Petr Rockai <prockai@redhat.com>
Committer: Dave Wysochanski <dwysocha@redhat.com>
The backup() call store metadata from memory.
But in cluster backup() call performs
remote nodes metadata backup and it reads data from disk.
For metadata backup consistency,
patch moves all backup() calls after vg_commit.
(Moreover, some tools already do that this way.)
Using argv[] list in exec_cmd() to allow more params for external commands.
Fsadm does not allow checking mounted filesystem.
Fsadm no longer accepts 'any other key' as 'no' answer to y/n.
Fsadm improved handling of command line options.
BEFORE:
tools/lvm lvresize -l +4 vg22/lv1linear
Volume group "vg22" not found
Volume group vg22 doesn't exist
AFTER:
tools/lvm lvresize -l +4 vg22/lv1linear
Volume group "vg22" not found
Fix unfilled paramater passed to fsadm from lvresize
Update fsadm to call lvresize if the partition size differs (with option -l)
Fix fsadm to support vg/lv name (like the rest of lv-tools)
Fix missing VG unlocks in some pvchange error paths.
Add some missing validation of VG names.
Rename validate_vg_name() to validate_new_vg_name().
Change orphan lock to VG_ORPHANS.
Change format1 to use ORPHAN as orphan VG name.
e.g. lvcreate -l 100%FREE to create an LV using all available space.
lvextend -l 50%LV to increase an LV by 50% of its existing size.
lvcreate -l 20%VG to create an LV using 20% of the total VG size.
Add --config for overriding most config file settings from cmdline.
Quote arguments when printing command line.
Remove linefeed from 'initialising logging' message.
Add 'Completed' debug message.
Don't attempt library exit after reloading config files.
Always compile with libdevmapper, even if device-mapper is disabled.
Fix some memory leaks in error paths found by coverity.
Use C99 struct initialisers.
Move DEFS into configure.h.
Clean-ups to remove miscellaneous compiler warnings.
