IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
- null_fd resource leak on error path in _reopen_fd_null fn
- dead code in verify_message in clvmd code
- dead code in _init_filter_components in toolcontext code
- null dereference in dm_prepare_selinux_context on error path if
setfscreatecon fails while resetting SELinux context
Check that fields in clvm_header are valid when
local or remote messages are received. If not,
log an error, dump the message data and ignore
the message.
For reseting locale environment into significantly less memory
consuming version 'C' - use LC_ALL instead of LANG since it has
higher priority in locale settings.
Otherwise we may observe whole locale-archive which might be
over 100MB on i.e. Fedora systems locked in memory with
some daemons.
clvmd -d option parsing was not working properly.
clvmd -d 2 (with space) has been ignored because of
'::' used in getopt string, and as failsafe it's been used '1'.
Later this debug_arg has been ignored and debug_opt was used
instead which happend to have value '1'.
Submitted-by: Robert Milasan <rmilasan at suse.com>
Reported-by: Robert Milasan <rmilasan at suse.com>
Drop whole buffer clearing (most messages at <100 bytes).
Just make sure we have always \0 terminated string for strlen() operations.
(before for PIPE_BUF sized messages this was not set).
This could be seen as some sort of simple validation - it's not easy to
recognize a valid message for now - but we definitely do not want to
allocate a lot of megabytes in clvmd memory locked daemon when broken
message gets in.
Size of 8000 is just selected for now - possibly there could be much
lower value put in.
Code here is using thread write protected variable without locking.
So add locking, for proper synchronization and a FIXME, since the
code needs closer look.
Barrier is supposed to be used in situation like this
and replace tricky mutex usage, where mutex has been unlocked
by a different thread than the locking thread.
Usage of thread unprotected init_test is not correct and needs probably lvm lock
since it part of lvm library. Current implementation may probably fail with
test mode and actually create something unexpectedly (and vice versa).
Since default thread stack size is around 8MB and clvmd creates for now thread
for message, clvmd may easily reach multi GB size of in-memory locked pages
(runs with mlockall()).
This patch significantly reduces memory usage to just tens of MB,
and now different reasons are the cause of server overloading.
Now we are running out of free file descriptors mostly.
Bugfix:
Add (most probably unfinished) support for -E arg with list of exclusive
locks. (During clvmd restart all exclusive locks would have been lost and
in fact, if there would have been an exclusive lock, usage text would be
printed and clvmd exits.)
Instead of parsing list options multiple times every time some lock UUID is
checked - put them straight into the hash table - make the code easier to
understand as well.
Remove was_ex_lock() function (replaced with dm_hash_lookup()).
Swap return value for get_initial_state() (1 means success).
Update man pages and usage info for -E option.
'a small step' towards cleaner shutdown sequence.
Normally clvmd doens't care about unreleased memory on exit -
but for valgrind testing it's better to have them cleaned all.
So - few things are left on exit path - this patch starts to remove
just some of them.
1. lvm_thread_fs is made as a thread which could be joined on exit()
2. memory allocated to local_clien_head list is released.
(this part is somewhat more complex if the proper reaction is
needed - and as it requires some heavier code moving - it will
be resolved later.
Fixing few issues:
struct clvm_header contains 'char args[1]' - so adding '+ 1' here
for message length calculation is 1 byte off.
Message with last byte uninitialized is then passed to write function.
Update also related arglen.
Initialise xid and clintid to 0.
Memory allocation is checked for NULL
- returned char not needed to be explicitly const
- warn if pipe() fails in clvmd (more fixes here needed for error paths...)
- assign (and ignore) read() output in drain buffer
Fixing some const warnings - with API change in:
int vg_extend(struct volume_group *vg, int pv_count, const char *const *pv_names,
Change is needed - as lvm2api expects const behaviour here.
So vg_extend() is doing local strdup for unescaping.
skip_dev_dir return const char* from const char* vg_name.
Rest of the patch is cleanup of related warnings.
Also using dm_report_filed_string() API change to simplify
casting in _string_disp and _lvname_disp.
Call for pthread_join() does not set errno value even though return values
looks like that. For now assign errno from return value and still use
strerror() to print some error message as this seems to be commonly used.
Add also log_sys_error() message for error close of local pipe.
We need to be sure that /var/run and /var/lock is always there.
(E.g. these two directories could be using tmpfs which then loose
all the content after reboot.)
Detect existence of new SELinux selabel interface during configure.
Use new dm_prepare_selinux_context instead of dm_set_selinux_context.
We should set the SELinux context before the actual file system object creation.
The new dm_prepare_selinux_context function sets this using the selabel_lookup
fn in conjuction with the setfscreatecon fn. If selinux/label.h interface
(that should be a part of the selinux library) is not found during configure,
we fallback to the original matchpathcon function instead.
The management threads (main_loop, the socket thread) could close a single fd
twice in a row sometimes. At least one other thread can be running at the same
time as the threads doing the double close. That one running thread also
happens to do some IO (namely, open /proc/devices, read from it, close it). If
there was enough "demand" for the local socket, this could happen:
- a connection to clvmd is about to finish, let's say the fd is 13 (it often
happens to be in my test script, don't ask why)
- the local_sock thread calls close(13)
- the lvm thread calls open("/proc/devices"...) and gets 13
- the main_loop thread calls close(13) [OOPS!]
- new connection arrives, and is accept'd by a (new) local_sock thread
- the accept gives an fd of 13 (since it's the lowest free fd at this point)
- the lvm thread gets around to read from it's /proc/devices handle... 13,
again
- the lvm thread hangs forever trying to read from the socket instead of
/proc/devices
Signed-off-by: Petr Rockai <prockai@redhat.com>
Reviewed-by: Milan Broz <mbroz@redhat.com>
It's quite new feature which is not supported by older compilers.
So until some better macros are introduced into LVM code - hotfix current
compilation problems and compile this code only for __clang__ defining compilers.
The signalling code (pthread_cond_signal/pthread_cond_wait) in the
pre_and_post_thread was using the wait mutex (see man pthread_cond_wait)
incorrectly, and this could cause clvmd to deadlock when timing was
right. Detailed explanation of the problem follows.
There is a single mutex around (L for Lock, U for Unlock), a signal (S) and a
wait (W). C for pthread_create. Time flows from left to right, each arrow is a
thread.
So first the "naive" scenario, with no mutex (PPT = pre_and_post_thread, MCT =
main clvmd thread; well actually the thread that does read_from_local_sock). I
will also use X, for a moment when MCT actually waits for something to happen
that PPT was supposed to do.
MCT -----C ------S--X-----S----X----------------------S------XXXXXXXXX
| everything OK up to this --> <-- point...
PPT -----WWW-----WWWW------------------------------WWWWWWWWWWWWW
Ok, so pthread API actually does not let you use W/S like that. It goes out of
its way to tell you that you need a mutex to protect the W so that the above
cannot happen. *But* if you are creative and just lock around the W's and S's,
this happens:
MCT ----C-----LSU----X-----LSU----X------------LSU------XXXXXXX
|
PPT ---LWWWU-------LWWWWU-----------------------LWWWWWWWWW
Ooops. Nothing changed (the above is what actually was done by clvmd before
this satch). So let's do it differently, holding L locked *all* the time in
PPT, unless we are actually in W (this is something that the pthread API does
itself, see the man page).
MCT ----C-----LSU------X---LSU---X-----LLLLLLLSU----X----
| (and they live happily ever after)
PPT L---WWWWW---------WWWW----------------W----------
So W actually ensures that L is unlocked *atomically* together with entering
the wait. That means that unless PPT is actually waiting, it cannot be
signalled by MCT. So if MCT happens to signal it too soon (it wasn't waiting
yet), it (MCT) will be blocked on the mutex (L), until PPT is actually ready to
do something.
Switch dmeventd to use dm_create_lockfile and drop duplicate code.
Allow clvmd pidfile to be configurable.
Switch cmirrord and clvmd to use dm_create_lockfile.
interface it should be using, it can still be overriden with -I.
If corosync isn't running or there is no information then the usual
checking will happen.
This code only builds if corosync is available.
Current code, when need to ensure that volume is not
active on remote node, it need to try to exclusive
activate volume.
Patch adds simple clvmd command which queries all nodes
for lock for given resource.
The lock type is returned in reply in text.
(But code currently uses CR and EX modes only.)
