IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Fix in the code that matches devices to system.devices entries when
the devices have the same serial number. A non-PV device in
system.devices has no pvid value, and the code was segfaulting
when checking the null pvid value.
In previous lvm versions, trailing spaces at the end of a t10 wwid would
be replaced with underscores, so the IDNAME string in system.devices
would look something like "t10.123_". Current versions of lvm ignore
trailing spaces in a t10 wwid, so the IDNAME string used would be
"t10.123". The different values would cause lvm to not recognize a
device in system.devices with the trailing _. Fix this by ignoring
trailing underscores in the IDNAME string from system.devices.
The recent change that verifies sys_serial system.devices entries
using the PVID did not exclude non-PV devices from being checked.
The verification code would attempt to use du->pvid which was null
for the non-PVs causing a segfault.
Handle multiple devices using the same serial number as
their device id. After matching devices to devices file
entries, if there is a discrepency between the ondisk PVID
and the devices file PVID, then rematch devices to
devices file entries using PVID, looking at all disks
on the system with the same serial number.
Only /sys/dev/block/major:minor/device/serial was read to find
a disk serial number, but a serial number seems to be reported
more often in other locations, so check these also:
/sys/dev/block/major:minor/device/vpd_pg80
/sys/class/block/vda/serial (for virtio disks only)
The new device_id types are: wwid_naa, wwid_eui, wwid_t10.
The new types use the specific wwid type in their name.
lvm currently gets the values for these types by reading
the device's vpd_pg83 sysfs file (this could change in the
future if better methods become available for reading the
values.)
If a device is added to the devices file using one of these
types, prior versions of lvm will not recognize the types
and will be unable to use the devices.
When adding a new device, lvm continues to first use sys_wwid
from the sysfs wwid file. If the device has no sysfs wwid file,
lvm now attempts to use one of the new types from vpd_pg83.
If a devices file entry with type sys_wwid does not match a
given device's sysfs wwid file, the sys_wwid value will also
be compared to that device's other wwids from its vpd_pg83 file.
If the kernel changes the wwid type reported from the sysfs
wwid file, e.g. from a device's t10 id to its naa id, then lvm
should still be able to match it correctly using the vpd_pg83
data which will include both ids.
t10 wwids are now edited in the same way that multipath does,
which is replacing a series of spaces with one _. Previously
lvm replaced every space with one _. Devices file entries
with the old form will be converted to the new shorter form.
Move the functions handling dev wwids.
Add dev flags indicating that wwids have been read from
sysfs wwid file or sysfs vpd_pg83 file. This can be
used to avoid rereading these.
Improve filter-mpath search for a device's wwid in
/etc/multipath/wwids, to avoid unnecessary rereading
of wwids from sysfs files.
Type 8 wwids from vpd_pg83 with naa or eui names should be
saved as those types.
Take the devices file lock before creating a new devices file.
(Was missed by the change to preemptively create the devices
file prior to setup_devices(), which was done to improve the
error path.)
pvcreate with --uuid would segfault if a devices file entry matched
the specified pvid, but the devices file entry had no device_id, which
could happen if the entry has a devname idtype.
to compare with wwids in /etc/multipath/wwids when
excluding multipath components. The wwid printed
from the sysfs wwid file may not be the wwid used
in multipath wwids. Save the wwids found for each
device on dev->wwids to avoid repeating reading
and parsing the sysfs files.
Change messages that refer to devices being "excluded by filters"
to say just "excluded". This will avoid mistaking the word
"filters" with the lvm.conf filter setting.
Warn if a scsi device is listed in the devices file that
is used by a multipath device that is not listed. This
will happen if a scsi device is listed in the devices
file and then an mpath device is set up to use it.
The way to correct this would be to remove the devices
file entry for the component device and add a new entry
for the multipath device.
dev_name(dev) returns "[unknown]" if there are no names
on dev->aliases. It's meant mainly for log messages.
Many places assume a valid path name is returned, and
use it directly. A caller that wants to use the path
from dev_name() must first check if the dev has any
paths with dm_list_empty(&dev->aliases).
Use dev_cache_get_existing() in a few common, high level
locations where it's obvious that only existing dev-cache
entries are wanted. This can be expanded and used in more
locations (or dev_cache_get can stop creating new entries.)
In a certain disconnected state, a block device is present on
the system, can be opened, reports a valid size, reports the
correct device id (wwid), and matches a devices file entry.
But, reading the device can still fail. In this case,
device_ids_validate() was misinterpreting the read error as
the device having no data/label on it (and no PVID).
The validate function would then clear the PVID from the
devices file entry for the device, thinking that it was
fixing the devices file (making it consistent with the on disk
state.) Fix this by not attempting to check and correct a
devices file entry that cannot be read. Also make this case
explicit in the hints validation code (which was doing the
right thing but indirectly.)
Removes some incorrect and unnecessary checks for other entries
when adding a new devices. The removed checks and corrections were
mostly redundant with what is already done by device id matching.
Other checking is reworked so the warnings are a bit different.
When a device has a wwid (from sysfs), but lvm ignores the wwid,
e.g. because it contains an unreliable "QEMU" value, then lvm
falls back to using IDTYPE=devname (the device name) as the
device id. If the device name changes after reboot, then lvm
automatically searches for the PV on other devices to find the
new device name and correct system.devices. When searching for
the PV, lvm skips looking at devices that would use other id types,
e.g. if a device would use a wwid and not a devname, then it
skips checking it. However, it failed to account for the fact
that a device may have wwid that was ignored, in which case it
should be checked.
. error exit means that lvmdevices --update would make a change.
. remove check of PART field from --check because it isn't used.
. unlink searched_devnames file to ensure check|update will search
If multipath component devices get through the filter and
cause lvm to see duplicate PVs, then check the wwid of the
devs and drop the component devices as if they had been
filtered. If a dm mpath device was found among the duplicates
then use that as the PV, otherwise do not use any of the
components as the PV.
"duplicate PVs" associated with multipath configs will no
longer stop commands from working.
Remove the searched_devnames file in a couple more places:
. When hints need refreshing it's possible that a missing
devices file entry could be found by searching devices
again.
. When a devices file entry devname is first found to be
incorrect, a new search for missing entries may be
useful.
When devnames are used as device ids and devnames change,
then new devices need to be located for the PVs. If the old
devname is now used by a filtered device, this was preventing
the code from searching for the new device, so the PV was
reported as missing.
Ensure only nonNULL 'du' pointer is dereference altough the comment
to the last assign 'du' pointer already suggest 'NULL' case should not happen.
So just being explicit.
mer du
Some device id types can only be used with specific device major
numbers, so use this restriction to avoid some comparisions.
This is more efficient, and can avoid some incorrect matches.
