IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
For mirror repair (and similar tasks) it can happen that full
device rescan is issued from clvmd.
Because code can be in the middle of repair (calling suspend)
clvmd should never try to scan suspended devices
(otherwise it causes deadlock).
Also code must not change ignore_suspended_device flag when
doing refresh_filters (called from lvmcache scan code).
bitmap tracking was switched from the e2fsprogs implementation to
the device-mapper implementation (dm_bitset_t). The latter has a
leading uin32_t field designed to hold the number of bits that are
being tracked. The code was not properly handling this change in
all places. Specifically, when getting the bitmap to/from disk.
Endian adjustments will likely need to be made on the accounting
field as well, since bitmaps are passed between machines on
start-up.
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
The logic was that lvconvert repair volumes, marking
PV as MISSING and following vgreduce --removemissing
removes these missing devices.
Previously dmeventd mirror DSO removed all LV and PV
from VG by simply relying on
vgreduce --removemissing --force.
Now, there are two subsequent calls:
lvconvert --repair --use-policies
vgreduce --removemissing
So the VG is locked twice, opening space for all races
between other running lvm processes. If the PV reappears
with old metadata on it (so the winner performs autorepair,
if locking VG for update) the situation is even worse.
Patch simply adds removemissing PV functionality into
lvconcert BUT ONLY if running with --repair and --use-policies
and removing only these empty missing PVs which are
involved in repair.
(This combination is expected to run only from dmeventd.)
This patch tries to correctly track changes in lvmcache related to commit/revert.
For vg_commit: if there is cached precommitted metadata, after successfull commit
these metadata must be tracked as committed.
For vg_revert: remote nodes must drop precommitted metadata and its flag in lvmcache.
(N.B. Patch do not touch LV locks here in any way.)
All this machinery is needed to properly solve remote node cache invalidaton which
cause several problems recently observed.
Lock mode is int masked by LCK_TYPE_MASK, always.
Patch also remove uneccessary masking lock flag on sender side,
if masking is needed, it is don on client side already.
- Add drop_precommitted flag to force drop precommitted metadata
- add lvmcache_commit_metadata() which upgrades precommitted metadata in cache
No functional change in this patch - just preparation for following change.
And decode flags in humar readable form in client.
And clean some trailing whitespaces.
No functional change in this patch (only debugging messages changed).
The LV locks make sense only for clustered LVs.
Properly check cluster flag and never issue cluster lock here.
There are several places in code, where it is already checked, this
patch add this check to all needed calls.
In previous code the lock behaviour was inconsistent,
for example, the pre/post callback can take lock even for local volume,
but deactivate call do not released this lock and it remains held forever.
The local LV lock request now just let run the underlying activation code
on local node, the same process like in local locking.
(Again, this is important for new mirror repair calls, here for local
mirrors but with cluster locking enabled.)
This is unnoticed regression from commit 31672ff60e
The pre/post callback need to convert lock always, local node
is going to modify metadata in this case, it it fails conversion,
the call is ignored.
Also it fixes bug when the lock is not yet held, we cannot set LKF_CONVERT
in this case, it will fail because this lock do not exist.
Note that the automatic conversion is still disabled in activate
call, so the original fix (reactivation of exlusive LV) should
be still in place.
(Code already not fail if unlocking not locked resource.)
This is needed in pre/post lock_lv call, where we can
request the same lock on local node becuase of suspend call.
- do_command and lock_vg expect flags (no change here)
Bug fixes:
- lock_vg should check for NONBLOCK on lock_cmd, flags have this bit masked-out
- do_pre/post_command expect do not mask flag at all, this causes that
the code inside is never run! (see following patches, these functions
expect plain command without flags)
is granted at one mode and an attempt to convert it wthout the LCK_CONVERT
flag set then it will return errno=EBUSY.
This fixes a pretty bad bug in which an LV could be activated exclusively on
one node and lvchange -ay on another would convert it to shared!
It might break some things in other areas, but I doubt it.
When clogd was renamed to cmirrord, somehow git got the remove of the old
files but not the add of the new files. This patch adds the new files.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
interface it should be using, it can still be overriden with -I.
If corosync isn't running or there is no information then the usual
checking will happen.
This code only builds if corosync is available.
This check-in includes the touch-ups, make file changes, copyrights,
and other necessities to include the cluster log daemon into the
build system.
[autoconf still needs to be run to generate the 'configure' and
'Makefile' files.]
Eliminate dependency on outside library, since the same functionality
exists in our tree.
[It is important that the bitops work in the same way, as the bitmaps
must remain backwards compatible. I haven't tested every architecture,
but the x86* archs work. My test involved using the old ext2fsprogs
bitops, memcpy'ing the bits over to the LVM bitset array and ensuring
that only the bits set via the old methods were set.]
The changes to remove LCK_NONBLOCK from the LVM locks broke clvmd because the
code was clearly wrong but working anyway! The constant was being masked rather
than the variable that was supposed to match against it.
A patch to the kernel, adding the 'luid' field to dm_ulog_request,
will allow us to properly identify log instances. We will now
be able to definitively identify which logs are to be removed/
suspended/resumed. This replaces the old faulty behavior of
assuming the logs were the same if they had the same UUID and
incrementing/decrementing a reference count.
made to compensate for the changes in the kernel-side component
that recently went upstream. (Things like: renamed structures,
removal of structure fields, and changes to arguments passed
between userspace and kernel.)
Use lvconvert --repair in dmeventd mirror DSO.
for now.
It replaces bad behaviour in one set of circumstances with bad behaviour
in a different set. We think the behaviour needs to be more configurable.
Current code, when need to ensure that volume is not
active on remote node, it need to try to exclusive
activate volume.
Patch adds simple clvmd command which queries all nodes
for lock for given resource.
The lock type is returned in reply in text.
(But code currently uses CR and EX modes only.)
This means two things:
1) Non-mirrored LVs will be no longer affected by mirror monitoring. (Before,
if you had a LV that went partially missing on a VG where a mirror leg failed,
this LV would be removed automatically by dmeventd... Probably not an
unrecoverable dataloss bug, but still quite unpleasant.)
2) If enough parallel PV space is available at the time of the mirror failure,
the failed devices will be automatically replaced using this spare space. Which
(and whether) free space may be used is still not configurable, but is a
planned feature. Since it is relatively easy to undo the action by converting
the mirror manually, I don't consider this to be a showstopper. In fact, I
think the compromise is much better than what we have now.
Buildsystem support device-mapper only install,
but generic install tagret includes both dm+lvm2.
For distribution which uses separate install_device-mapper,
there is no way how to install lvm2 only
(so after installing lvm2 for packaging purposes
built system must remove installed device-mapper files).
Fix it by allowing lvm2_install target, similarily like
install_cluster for clvmd.
(install = install_device-mapper + install_lvm2)
Run backup of metadata on remote nodes in the
same place like local node - when calling backup().
Introduce backup_locally() which calls only
local backup if needed.
Remote backup is now trigerred by LCK_VG_BACKUP flag
combination (special VG lock).
This lock type will call check_current_backup()
(including backup_locally() call) and updates
metadata on all nodes.
(Patch fixes non-functional remote backup,
current call during VG lock never triggers.)
- Rename unlock_all to destroy_lvhash,
this function is called in cluster shutdown
unlocks everything and clean up allocated info space.
- Tidy lv_hash_lock use
.
Except adding free(lvi) in lv_has destructror
there is no functional change.
(for example when CLVMD_CMD_LOCK_VG for is called during vgscan).
If clvmd calls LV lock, it calls
/* clean the pool for another command */
dm_pool_empty(cmd->mem);
to clean up memory pool after command.
Unfortunately, do_refresh_cache() do not call this
and because during it operation it allocates some memory,
the pool increases.
Also do_refresh_cache should use lvm_lock
(it manipulates with lvm internal data).
The same applies for lvm_backup command.
Signed-off-by: Milan Broz <mbroz@redhat.com>
There is a rudimentary make file in place so people can build by hand
from 'LVM2/daemons/clogd'. It is not hooked into the main build system
yet. I am checking this in to provide people better access to the
source code.
There is still work to be done to make better use of existing code in
the LVM repository. (list.h could be removed in favor of existing list
implementations, for example. Logging might also be removed in favor
of what is already in the tree.)
I will probably defer updating WHATS_NEW_DM until this code is linked
into the main build system (unless otherwise instructed).
Very simple / crude method of removing 'is_static' from initialization.
Why should we require an application tell us whether it is linked
statically or dynamically to libLVM? If the application is linked
statically, but libraries exist and dlopen() calls succeed, why
do we care if it's statically linked?
This allows us to remove one argument from create_toolcontext() and
moves it closer to a generic library init function.
In the arg_*() functions, we just use _the_args() directly.
For now we leave the first parameter to these
arg_*() functions (struct cmd_context *) because
of the number of files involved in removing the
parameter.
Very similar argument to removal of init_debug() and other calls.
create_toolcontext() calls _process_config() which sets
cmd->default_settings.activation, then calls
set_activation(cmd->default_settings.activation). Later, create_toolcontext()
sets cmd->current_settings = cmd->default_settings. So these calls
set_activation(cmd->current_settings.activation) are redundant.
Identical argument to previous patch which removed archive_enable() calls.
We add a new parameter to backup_init() which sets the enable value based
on the cmd->default_settings.backup value. This value was used to set
cmd->current_settings.backup, used in the removed backup_enable() call.
_init_backup() calls archive_init(), which originally set 'enabled' to
a hardcoded '1' value. This seems incorrect based on my read of other
areas of the code so here we add a 'enabled' paramter to archive_init().
We pass in cmd->default_settings.archive, which is obtained from the
config tree. Later in create_toolcontext, cmd->current_settings is
set to cmd->default_settings. The archive_enable() call we remove
here was using cmd->current_settings to set the 'archive' enable
value. The final value of cmd->archive_params->enabled should thus
be equivalent to the original code.
The rationale for removing init_verbose() call is very similar to removing
init_debug() call. create_toolcontext() calls _init_logging() which
makes these calls:
/* Verbose level for tty output */
cmd->default_settings.verbose =
find_config_tree_int(cmd, "log/verbose", DEFAULT_VERBOSE);
init_verbose(cmd->default_settings.verbose + VERBOSE_BASE_LEVEL);
And being that create_toolcontext() copies default_settings into
current_settings at the bottom, the init_verbose() call we are removing:
init_verbose(cmd->current_settings.verbose + VERBOSE_BASE_LEVEL);
is redundant.
We can safely remove because create_toolcontext() calls _init_logging(),
which makes these calls:
/* Debug level for log file output */
cmd->default_settings.debug =
find_config_tree_int(cmd, "log/level", DEFAULT_LOGLEVEL);
init_debug(cmd->default_settings.debug);
Then at the bottom of create_toolcontext() we do this:
cmd->current_settings = cmd->default_settings;
So the call we are removing from init_lvm() functions (clvmd and lvmcmdline):
init_debug(cmd->current_settings.debug);
Just sets the value of debug based on 'cmd->current_settings.debug'.
Since cmd->current_settings is equivalent to cmd->default_settings, and
init_debug() was called with cmd->default_settings, the call we remove is
redundant.
snapshot DSO unregistered itself when snapshot changed state to invalid.
This can cause a race (and several timeouts), when for example another snapshot
is added and in the middle of operation (suspend/resume) the monitoring thread
unregister itself.
Fix it by keeping the snapshot monitored after invalidation - just reset
threshold to not really print any messages to syslog.
failed to link against liblvm2cmd.
Dmeventd DSOs *require* lvm2cmd to be linked in.
For the future:
1) AC_SUBST does not create Makefile variables, only @foo@-style substitutions
2) When using `test', whitespace around `=' is essential:
test a=b is true, as is test a=a
* configure.in (LVM2CMD_LIB): Define if --enable-cmdlib.
* dmeventd/mirror/Makefile.in (CLDFLAGS): Use $(LVM2CMD_LIB) rather
than hard-coding -llvm2cmd.
* dmeventd/snapshot/Makefile.in (CLDFLAGS): Likewise.
which is not used since the switch away from async version saLck
. num_nodes should equal to member_list_entries, i.e.
joined_list_entires is 0 when a node leaves the group.
Thanks to Xinwei Hu for the patch.
It does 2 things.
1. The cpg_deliver_callback make a compare between target_nodeid and our_nodeid.
It turns out openais set target_nodeid to 0 sometimes. for broadcasting ? I change the behavior so that lvm will process_remote also on target_nodeid == 0
2. The joined_list passed to cpg_confchg_callback doesn't include the already exist nodes in the group, which leads to an incomplete node_hash. I simply add all other nodes in member_list to node_hash also.
Thanks to Xinwei Hu for this patch.
