IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Read 2 environmental vars to learn about overide position for
CLVMD and LVM binaries.
We support LVM_BINARY in other script - and this way we could easily
test restart in our test-suite.
Bugfix:
Add (most probably unfinished) support for -E arg with list of exclusive
locks. (During clvmd restart all exclusive locks would have been lost and
in fact, if there would have been an exclusive lock, usage text would be
printed and clvmd exits.)
Instead of parsing list options multiple times every time some lock UUID is
checked - put them straight into the hash table - make the code easier to
understand as well.
Remove was_ex_lock() function (replaced with dm_hash_lookup()).
Swap return value for get_initial_state() (1 means success).
Update man pages and usage info for -E option.
Before, we used to display "Can't remove open logical volume" which was
generic. There 3 possibilities of how a device could be opened:
- used by another device
- having a filesystem on that device which is mounted
- opened directly by an application
With the help of sysfs info, we can distinguish the first two situations.
The third one will be subject to "remove retry" logic - if it's opened
quickly (e.g. a parallel scan from within a udev rule run), this will
finish quickly and we can remove it once it has finished. If it's a
legitimate application that keeps the device opened, we'll do our best
to remove the device, but we will fail finally after a few retries.
If you specify the segment type (e.g. --type mirror) and the mirrors argument
as zero, it would result in a mirrored LV with only one image. While the device
may be valid in theory, it should not be allowed in practice. It also makes it
difficult on the conversion tools, since they react badly to single-image
mirrors.
Patch fixes Clang warnings about possible access via lv_name NULL pointer.
Replaces allocation of memory (strdup) with just pointer assignment
(since execve is being called anyway).
Checks for !*lv_name only when lv_name is defined.
(and as I'm not quite sure what state this really is - putting a FIXME
around - as this rather looks suspicios ??).
Add debug print of passed clvmd args.
(since data in statbuf are invalid).
Check whether sysconf managed to find _SC_PAGESIZE.
Report at least debug warning about failing unlink
(logging scheme here seems to be a different then in lvm).
Duplicate terminal FDs and use similar code as is made in clvmd
and cleanup warns about missing open/close tests.
FIXME: Looks like we already have 3 instancies of the same code in lvm repo.
When fsadm is test - it needs to execute lvm and fsadm from non-standard path
setting. So adding a support in fsadm script when user set LVM_BINARY, then
the lvm command invoced from fsadm will have the same PATH setting as before
entering fsadm command.
Needed for testing.
In case someone would use filename paths with spaces when changing
this script surround commands with '"'.
With default settings there is no change in behavior.
LVM has huge set of options now - it's approaching 60 short-arg less options
and we get interesting case of misdetection for 'merge' option which has been
put into the middle of options with 'short_arg' - thus certainly past 65. (ASCII 'A').
To avoid confusion of short_arg with long_opt number - add '128' to all such
non-short-arg options.
Revert John patch, which fixed only 1 place where ~LVM_WRITE was in use and
convert ommited LVM_READ/WRITE flags to 64bit constants as well.
(Since both 'status' flags for LV and VG are 64bit.)
lv_mirror_count was not able to handle mirrors of stripes properly. When a
failed device is removed, the MIRRORED status flag is removed from the LV
conditionally based on the results of lv_mirror_count. However, lv_mirror_count
trusted the MIRRORED flag - thinking any such LV must be mirrored. It would
happily assign first_seg(lv)->area_count as the number of mirrors, but when
a mirrored striped LV was reduced to a simple striped LV area_count would be
the number of /stripes/ not the number of /mirrors/. A result higher than 1
would be returned from lv_mirror_count, the MIRRORED flag would not be cleared,
and the LV would fail to be up-converted properly in lvconvert_mirrors_aux
because of it.
The operation of deactivating the residual error target LV after removing a
mirror layer can cause a "device in-use" conflict with udev. Giving udev a
poke before calling deactivate_lv eliminates the conflict. The stick used
to poke udev is 'sync_local_dev_names'.
Kernel requires a mirror to be at least 1 region large. So,
if our mirror log is itself a mirror, it must be at least
1 region large. This restriction may not be necessary for
non-mirrored logs, but we apply the rule anyway.
(The other option is to make the region size of the log
mirror smaller than the mirror it is acting as a log for,
but that really complicates things. It's much easier to
keep the region_size the same for both.)
LVM_WRITE is a 32-bit flag. Now that RAID[_IMAGE|_META] are 64-bit,
and'ing a RAID LV's status against LVM_WRITE can reset the higher order
flags.
A similar thing will affect thinp flags if not careful.
_alloc_init calculates the number of necessary log extents via
'mirror_log_extents'. 'mirror_log_extents' takes 3 arguments: region_size,
pe_size, and size of the mirror LV. Unfortunately, _alloc_init is guessing at
the mirror size by using 'ah->new_extents / ah->area_multiple' - the number of
extents that the mirror images have. However, this is /always/ wrong when
allocating the log separately. Further, the log is always allocated separately
unless we are up-converting the mirror at the same time. It was by luck alone
that a default value of '1' reflects what we want in most cases.
In order to get a decent value computed, we need to pass in the 'lv' argument
to allocate_extents. This would normally imply a desire for cling/contiguous
allocation to the given LV, but since we are not allocating any parallel
extents and only log extents, it works fine.
When an image is split from a 2-way mirror, the original mirror is converted to
a linear device. To do this, the top "layer" must be removed. The segments
are transferred from the sub-lv to the top-level LV and the link is severed.
The former sub-lv - having its segments transferred - now contains a temporary
error target.
When the original LV is resumed, the old sub-lv that now contains an error
segment is activated and scanned. This is what causes the I/O error messages.
There are three ways to fix this problem:
1) Do not set the sub-lv which contains the error target as "visible" before
suspending the original LV. This way, when the original is resumed, the sub-lv
device node is not created and it is not scanned - avoiding the error messages.
The problem with this approach is that if the machine crashes after the
resume, it leaves the *hidden* LV in place and the user has a more difficult
time noticing that it needs to be cleaned up. Thus, this type of processing is
frowned upon.
2) Do like _remove_mirror_images does and suspend the original, then suspend
the sub-lv (the error target), then resume the sub-lv, and finally resume the
original LV. This seems like extra pointless operations to me, but it does not
produce the error message (although, I'm not sure why) and it allows us to
leave the visible flag in place.
3) Flag the sub-lv (error target) with a "do not scan" flag. This seems like
the cleanest approach, but I have been unable to find the method for doing
this. LVs get tagged in such a way by _get_udev_flags, but in this case the
resume of the original LV also resumes the error target LV without running it
through _get_udev_flags (likely because they are no longer linked). Could
there be something wrong in resume_lv?
Option #2 was chosen to fix this bug, but it seems like more of a workaround
for now.
Some major distributions are still using 'mawk' and they are not using
the latest version - we end here with hidden dependency on the latest
version of mawk (1.3.4) while i.e. Debian Lenny seems to stay with 1.3.3.
So we end with completely broken vgimportclone script on such system.
We would need to check for proper support of :space: and abort build if
it doesn't work or simplier replace [:space:] with [ \t] which seems
sufficient to make it work (as can be seen in this patch)
A better fix would be to use command line parameter override - leaving
as FIXME comment.
This patch makes t-vgimportclone.sh test passing on Lenny.
There was a bad sequence:
*) Make changes to LV layout to split images (e.g. 4-way -> 2-way/2-way)
1) vg_write, suspend_lv(original_mirror), vg_commit
2) activate_lv(newly_split_lv)
3) resume_lv(original_mirror)
Step #2 is not allowed. However, without it, the resume of the original
mirror will also resume its former sub-LVs - making it impossible to
activate the newly split LV due to the changes in layering, pointers, and
names that had already been made. Additionally, the resume or the original
brings the sub-lv's online with names that differ from the metadata on disk -
also a no-no. Thus, the split must be done in stages such that the active LVs
always reflect what is in the committed LVM metadata.
First, alter the original mirror by releasing the images. The images are made
visible and independent as an intermediate stage. (This way, we can have
consistency between LVM metadata and active LVs.) The second stage collects
the recently split LVs, deactivates them, forms them into a mirror if necessary,
and then activates them. It is a bit of a circuitous method, but it is the only
way to split a mirror from a mirror and obey these general rules:
1) Never [de]activate sub-lvs when the top-level LV is suspended
2) Avoid having active LVs that differ from the description in the LVM metadata
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
