IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Add code to handle creation of thin-pool with VDO data backend
which can be seen as compressed deduplicated thin-pool.
To avoid need of changing to many internal APIs, pass the conversion
parameters for create thin-pool data volume via cmd_context.
Before checking seg_type of the first area, check there is
some existing area.
Since we now support error and zero segtypes, these do not have
any PV area present.
While create new LV for pool volume, use name from 'pool_metadata%d' naming
sequence. This LV is later on renamed to pool_t/cmeta, but if there
is any error in the middle, we may evenutally leave some 'volume',
With this name it can be slightly more obvious how it got there,
but also when we handle _pmspare name - we get slightly more predictible
name used there for it.
However for a standard usage this commit shall no visible impact as the
name is used temporarily just for cleaning LV.
When executing process_each_lv_in_vg, we process live LVs first and
after that, we process any historical LVs. In case we have just removed
an LV, which also means we have just made it "historical" and so it
appears as fresh item in vg->historical_lvs list, we have to skip it
when we get to processing historical LVs inside the same process_each_lv_in_vg
call.
The simplest approach here, without introducing another LV list, is to
simply mark such historical LVs as "fresh" directly in struct
historical_logical_volume when we have just removed the original LV
and created the historical LV for it. Then, we just need to check the
flag when processing historical LVs and skip it if it is "fresh".
When we read historical LVs out of metadata, they are marked as
"not fresh" and so they can be processed as usual.
This was mainly an issue in conjuction with -S|--select use:
# lvmconfig --type diff
metadata {
record_lvs_history=1
}
(In this example, a thin pool with lvol1 thin LV and lvol2 and lvol3 snapshots.)
# lvs -H vg -o name,pool_lv,full_ancestors,full_descendants
LV Pool FAncestors FDescendants
lvol1 pool lvol2,lvol3
lvol2 pool lvol1 lvol3
lvol3 pool lvol2,lvol1
pool
# lvremove -S 'name=lvol2'
Logical volume "lvol2" successfully removed.
Historical logical volume "lvol2" successfully removed.
...here, the historical LV lvol2 should not have been removed because
we have just removed its original non-historical lvol2 and the fresh
historical lvol2 must not be included in the same processing spree.
Names matching internal code layout.
Functionc in thin_manip.c uses thin_pool in its name.
Keep 'pool' only for function working for both cache and thin pools.
No change of functionality.
When splitting VG with thin/cache pool volume, handle pmspare during
such split and allocate new pmspare in new VG or extend existing pmspare
there and eventually drop pmspare in original VG if is no longer needed
there.
There is not much point to let allocate more then this size
even when i.e. converted LV is bigger then 16GiB (%extent_size)
ATM neither thin-pool nor cache-pool supports bigger metadata.
Initial support for thin-pool used slightly smaller max size 15.81GiB
for thin-pool metadata. However the real limit later settled at 15.88GiB
(difference is ~64MiB - 16448 4K blocks).
lvm2 could not simply increase the size as it has been using hard cropping
of the loaded metadata device to avoid warnings printing warning of kernel
when the size was bigger (i.e. due to bigger extent_size).
This patch adds the new lvm.conf configurable setting:
allocation/thin_pool_crop_metadata
which defaults to 0 -> no crop of metadata beyond 15.81GiB.
Only user with these sizes of metadata will be affected.
Without cropping lvm2 now limits metadata allocation size to 15.88GiB.
Any space beyond is currently not used by thin-pool target.
Even if i.e. bigger LV is used for metadata via lvconvert,
or allocated bigger because of to large extent size.
With cropping enabled (=1) lvm2 preserves the old limitation
15.81GiB and should allow to work in the evironement with
older lvm2 tools (i.e. older distribution).
Thin-pool metadata with size bigger then 15.81G is now using CROP_METADATA
flag within lvm2 metadata, so older lvm2 recognizes an
incompatible thin-pool and cannot activate such pool!
Users should use uncropped version as it is not suffering
from various issues between thin_repair results and allocated
metadata LV as thin_repair limit is 15.88GiB
Users should use cropping only when really needed!
Patch also better handles resize of thin-pool metadata and prevents resize
beoyond usable size 15.88GiB. Resize beyond 15.81GiB automatically
switches pool to no-crop version. Even with existing bigger thin-pool
metadata command 'lvextend -l+1 vg/pool_tmeta' does the change.
Patch gives better controls 'coverted' metadata LV and
reports less confusing message during conversion.
Patch set also moves the code for updating min/max into pool_manip.c
for better sharing with cache_pool code.
To avoid polution of metadata with some 'garbage' content or eventualy
some leak of stale data in case user want to upload metadata somewhere,
ensure upon allocation the metadata device is fully zeroed.
Behaviour may slow down allocation of thin-pool or cache-pool a bit
so the old behaviour can be restored with lvm.conf setting:
allocation/zero_metadata=0
TODO: add zeroing for extension of metadata volume.
Before 'archive()' is called, lvm2 must not touch/modify metadata.
So move setting CACHE_VOL related flags past this point.
Also make sure reading of cache segtype always restores this
flag properly (even if compatible flag would be lost).
A cachevol LV had the CACHE_VOL status flag in metadata,
and the cache LV using it had no new flag. This caused
problems if the new metadata was used by an old version
of lvm. An old version of lvm would have two problems
processing the new metadata:
. The old lvm would return an error when reading the VG
metadata when it saw the unknown CACHE_VOL status flag.
. The old lvm would return an error when reading the VG
metadata because it would not find an expected cache pool
attached to the cache LV (since the cache LV had a
cachevol attached instead.)
Change the use of flags:
. Change the CACHE_VOL flag to be a COMPATIBLE flag (instead
of a STATUS flag) so that old versions will not fail when
they see it.
. When a cache LV is using a cachevol, the cache LV gets
a new SEGTYPE flag CACHE_USES_CACHEVOL. This flag is
appended to the segtype name, so that old lvm versions
will fail to use the LV because of an unknown segtype,
as opposed to failing to read the VG.
Different flavors of activate_lv() and lv_is_active()
which are meaningful in a clustered VG can be eliminated
and replaced with whatever that flavor already falls back
to in a local VG.
e.g. lv_is_active_exclusive_locally() is distinct from
lv_is_active() in a clustered VG, but in a local VG they
are equivalent. So, all instances of the variant are
replaced with the basic local equivalent.
For local VGs, the same behavior remains as before.
For shared VGs, lvmlockd was written with the explicit
requirement of local behavior from these functions
(lvmlockd requires locking_type 1), so the behavior
in shared VGs also remains the same.
As we start refactoring the code to break dependencies (see doc/refactoring.txt),
I want us to use full paths in the includes (eg, #include "base/data-struct/list.h").
This makes it more obvious when we're breaking abstraction boundaries, eg, including a file in
metadata/ from base/
Use properly exclusive activation when reactivating origin after
snapshot merge (since origin must have been previously also exlusively
activated).
Same applies when converting volumes to thin-pool or cache.
Previously used 'only' local activation incorrectly allowed local
activation of some targets (i.e. raid) - thus 'leaking' chance to
activate same device on another node - which can be a problem
for device types like raid.
As now we can properly recognize all paramerters for pool creation,
we may drop PASS_ARG_ defines and rely on '_UNSELECTED' or 0 entries
as being those without user given args.
When setting are not given on command line - 'update' function
fill them from profiles or configuration. For this 'profile' arg
was needed to be passed around and since 'VG' itself is not needed,
it's been all replaced with 'cmd, profile, extents_size' args.
Add support for making an interconnection between thin LV segment and
its indirect origin (which may be historical or live LV) - add a new
"indirect_origin" argument to attach_pool_lv function.
When an LV is being removed, we create an instance of
"struct historical_logical_volume" wrapped up in
"struct generic_logical_volume".
All instances of "struct historical_logical_volume" are then recorded in
"historical_lvs" list which is part of "struct volume_group".
The "historical LV" is then interconnected with "live LVs" to
connect a history chain for the live LV.
This would be in case the pool segment was not found.
LVM2.2.02.112/lib/metadata/pool_manip.c:238:36: warning: Access to field 'segtype' results in a dereference of a null pointer (loaded from variable 'pool_seg')
Move code for creation of thin volume into a single place
out of lv_extend(). This allows to drop extra pool arg
for alloc_lv_segment() && lv_extend() and makes code
more easier to read and follow.
Move test for size of new LV names in front before
any creation of LV.
Properly check striped segtype kernel presence,
since passed 'segtype' is already tested.
Keep deactivation error path local to wiping part of the function.
Create metadata with temporary flag (it's activated, zeroed
and deactivated).
Instead of segtype->ops->name() introduce lvseg_name().
This also allows us to leave name() function 'empty' for default
return of segtype->name.
TODO: add functions for rest of ops->
