IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Define a new pvs field, pv_mda_used_count, and a new vgs field,
vg_mda_used_count to match the existing pv_mda_count and vg_mda_count.
These new fields count the number of mdas that have the 'ignored' bit
clear (they are in use on the PV / VG). Also define various supporting
functions to implement the counting as well as setting the ignored
flag and determining if an mda is ignored. These high level functions
call into the lower level location independent mda ignore functions
defined by earlier patches.
Note that counting ignored mdas in a vg requires traversing both lists
and checking for the ignored bit on the mda. The count of 'ignored'
mdas then is defined by having the bit set, not by which list the mda
is on. The list does determine whether LVM actually does read/write to
the mda, though we must count the bits in order to return accurate numbers
for the various counts. Also, pv_mda_set_ignored must search both vg
lists for ignored mda. If the state changes and needs to be committed
to disk, the ignored mda will be on the non-ignored list.
Note also in pv_mda_set_ignored(), we must properly manage the mda lists.
If we change the ignored state of an mda, we must change any mdas on
vg->fid->metadata_areas that correspond to this pv. Also, we may
need to allocate a copy of the mda, as is done when fid->metadata_areas
is populated from _vg_read(), if we are un-ignoring an ignored mda.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Add a second mda list, metadata_areas_ignored to fid, and a couple
functions, fid_add_mda() and fid_add_mdas() to help manage the lists.
These functions are needed to properly count the ignored mdas and
manage the lists attached to the 'fid' and ultimately the 'vg'.
Ensure metadata_areas_ignored is initialized in other formats, even
if the list is never used.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Because of the way mdas are handled internally, where a PV in a VG
has mdas on both info->mdas and vg->fid->metadata_areas list, we
need a location independent copy constructor for struct
metadata_area. Break up the existing format-text specific copy
constructor into a format independent piece and a format dependent
piece.
This function is necessary to properly implement pv_set_mda_ignored().
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Reviewed-by: Alasdair G Kergon <agk@redhat.com>
A metadata_area is defined independent of the location. One downside
is that there is no obvious mapping from a pv to an mda. For a PV in
a VG, we need a way to start with a PV and end up with an MDA, if we
are to manage mdas starting with a device/pv. This function provides
us a way to go down the list of PVs on a VG, and identify which ones
match a particular PV.
I'm not entirely happy with this approach, but it does fit into the
existing structures in a reasonable way.
An alternative solution might be to refactor the VG - PV interface such
that mdas are a list tied to a PV. However, this seemed a bit tricky since
a PV does not come into existence until after the list of mdas is
constructed (see _vg_read() - we create a 'fid' and attach mdas to it,
then we go through them and attach pvs).
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Reviewed-by: Alasdair G Kergon <agk@redhat.com>
First we add a 'flags' field to the location independent
metadata_area structure, and a MDA_IGNORE flag. The
mda_is_ignored and mda_set_ignored functions are added to
manage the flag. Adding the flag and functions gives a
library interface to ignore metadata areas independent of
the underlying location (disk, file, etc). The location
specific read/write functions must then handle the specifics
of what this flag means to the location.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Reviewed-by: Alasdair G Kergon <agk@redhat.com>
The same region size is used for both mirror volume and mirrored
log volume, but when the physical extent size is bigger than region size,
the size of mirror leg for mirrored log is smaller than the region size
and lvcreate command fails.
This patch adjusts a region size of mirrored log to a smaller value of
region size or physical extent size.
[This patch ensures that the region_size of the mirrored log does not
exceed the size of the mirrored log itself, which would violate the
kernel constraint: (region_size <= ti->len).]
Signed-off-by: Takahiro Yasui <takahiro.yasui@hds.com>
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
converting from 2-way to 3-way mirror (collapse_mirrored_lv)
was calling '_remove_mirror_images' with the 'remove_log'
parameter set. When the code was put in to fix 599898 to
honor log parameters during conversion, this argument was
suddenly being honored. Thus, when someone would convert from
a 2-way to 3-way mirror, the log would get removed.
'collapse_mirrored_lv' should not be calling '_remove_mirror_images'
with 'remove_log' set.
to 3-way mirror. When conversion operations are performed on
these types of mirrors, log options can be confused/ignored.
In the case of a converting 3-way mirror, we have a top-level
2-way corelog mirror whose legs are 1) a 2-way disk-log mirror
and 2) a linear device. If we wish to convert this 3-way mirror
to a 2-way mirror, the linear device is removed and the extra
top layer is eliminated. If we also wished to convert the disk
log to a core log in the same step, ambiguity creeps in. It is
somewhat obvious what the user wants - a 2-way mirror with a
corelog. However, looking at the top level mirror before
compression, it seems that the mirror already has a core log.
This is why the operation seemed to fail.
This patch simply re-evaluates what mirrored_seg points to after
a compression and then considers the log argument.
This is a fix for bug 599898.
Introduce struct cmd_vg to store information about needed
volume group name, vgid, flags and the pointer to opened VG.
Keep VGs list in alphabetical order for locking order.
Introduce functions:
cmd_vg_add() add new cmd_vg entry.
cmd_vg_lookup() search cmd_vgs for vg_name.
cmd_vg_read() open VGs in cmd_vgs list.
cmd_vg_release() close VGs in reversed order.
Add pointer to linked list of opened VGs. List temporarily keeps
the information about needed or locked and opened VGs for replicator target.
Also add cmd_missing_vgs flag information for quick check and
also for possible continuos process_each_lv() usage where we need
to detect whether failure has been caused by missing VG or
some other reason.
Adding configure.in support for Replicators.
Adding basic lib lvm support for Replicators.
Adding flags REPLICATOR and REPLICATOR_LOG.
Adding segments SEG_REPLICATOR and SEG_REPLICATOR_DEV.
Adding basic methods for handling replicator metadata.
Some commands start with a pvname, but we'd like to force users to
start with a vg handle to obtain a pv handle. Our best option seems
to be providing a way to look up the vgname from the pvname, and then
require them to use vg_read/vg_open.
In addition to the pvname lookup function, this patch also provides a
lookup by pvid. The lookup by pvid can be used in conjunction with
lvmcache_get_pvids to process all pvs in the system.
The pvid find function first calls lvmcache_vgname_from_pvid, which may
cause the label to be read if it is not in the cache. If the vgname is
returned is an orphan, we then check to see if there are metadata areas,
and if not, we scan every PV on the system by calling scan_vgs_for_pvs().
In most cases we should not need to do this, and by using the info->mdas
count, we avoid calling pv_read() as prior code did. So this patch is a
bit cleaner and should allow us to refactor more of the pv code.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
are active mirrors or snapshots.
We don't have the mechanisms in place to change the device-mapper
tables for those targets that have behavioral differences between
cluster and single machine instances. Allowing users to change
the attribute but not changing the target's behavior can lead to
data corruption.
The following bugs are fixed/avoided by this patch:
235123 - vgchange -c [ny] do not change target types when necessary
289331 - RFE: switching from cluster domain to local domain needs to deactivate volume somehow
289541 - when changing from local to cluster, volumes can not appear to be deactivated
being able to remove more images from a mirror than the
number of PVs directly specified for removal.
The effort to fix bug 581611 corrected a bug that was unnoticed
at the time. The loop in _remove_mirror_images that looks over
the specified PVs was allowing devices that were previously
counted and moved to the end of the list to be double-counted.
This resulted in the number of devices needed for removal always
being satisfied - even if the user did not specify enough PVs
for removal to satisfy the request. When 581611 was fixed, this
double-counting no longer took place and the result was to remove
only the minimum of the number of PVs specified or the number
that was asked to be removed.
By simply always setting 'new_area_count' (as used to be done
only in the else statement), we return to the previous behavior.
Indeed, this is exactly what the double-counting was allowing
to happen before the fix of 581611.
Allow lv_remove_with_dependencies() to know the top-level LV that was
requested to be removed (otherwise it recurses and we lose context).
A merging snapshot cannot be removed directly but the associated origin
can be. Disallow removal of a merging snapshot unless the associated
origin is also being removed.
We should write metadata into next position in the ring buffer while calling
vgrename and vgcfgrestore. At this code level (_vg_write_raw), we were not able
to determine if this is a rename or not. If yes, then accompanying VG structure
passed here has a new name set, not the old one.
When looking for a location where to put metadata next, we were given a NULL
value because of failed VG name comparison (in _find_vg_rlocn) between the
name in existing metadata and metadata we're just about to write.
This resets the position in the ring buffer, overwriting any existing metadata
(and also incorrectly updates the cache to "orphan" afterwards).
This patch just adds old_name item in struct volume_group that we can check and use
if necessary and detect renames at lower layers as well.
The same applies for vgcfgrestore, but here we're using a special value of
old_name, an empty string, to disable the check with existing metadata totally.
lvm2app needs a link back to the vg in order to use the vg handle for
memory allocations as well as other things. This patch adds the field
to struct physical_volume, and sets pv->vg when reading a vg from disk or
extending a vg by using the helper function previously added,
add_pvl_to_vgs(). Moves and renames are handled with separate code
inside move_pv() and vgmerge(). Add pv->vg check to vg_validate().
A NULL value in pv->vg signifies membership in the orphan VG.
Note though in the case of pv_read() on a device with metadatacopies == 0,
more devices may need to be read for an authoritative answer.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Now that we have library functions to add/delete a pv from the vg->pvs
list, call them from everywhere.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Add a delete function to manage the vg->pvs list.
NOTE: It may be possible to do further cleanup to these add/del functions
by passing a 'pv' as input instead of 'pv_list'. The pv_list is used for
functions which do allocations (lvcreate) while other places in the code
just manage a list of 'pv' (e.g. import functions, vgextend, etc).
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
A user specifying duplicate paths on the cmdline of vgcreate will
get a message similar to the following:
vgcreate vgtest2 /dev/loop3 /dev/loop5
Found duplicate PV jk1lXsKzwyOKlXq6bhaFFKMQQ06oPgu8: using /dev/loop5 not /dev/loop3
Found duplicate PV jk1lXsKzwyOKlXq6bhaFFKMQQ06oPgu8: using /dev/loop3 not /dev/loop5
Internal error: Duplicate PV id jk1lXs-Kzwy-OKlX-q6bh-aFFK-MQQ0-6oPgu8 detected for /dev/loop3 in vgtest2.
This is caught by vg_validate(), but it would be good to find
this condition earlier in the vgcreate code. add_pv_to_vg()
currently checks by pvname, but does not look for duplcate pvids.
This patch adds the check for duplicate pvids and results in new
error output as follows:
vgcreate vgtest2 /dev/loop3 /dev/loop5
Found duplicate PV jk1lXsKzwyOKlXq6bhaFFKMQQ06oPgu8: using /dev/loop5 not /dev/loop3
Found duplicate PV jk1lXsKzwyOKlXq6bhaFFKMQQ06oPgu8: using /dev/loop3 not /dev/loop5
Physical volume '/dev/loop5 (jk1lXs-Kzwy-OKlX-q6bh-aFFK-MQQ0-6oPgu8)' listed more than once.
Unable to add physical volume '/dev/loop5' to volume group 'vgtest2'.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
When moving parts of striped LVs, pvmove wouldn't care about leaving you with
two stripes on the same disk. Now --alloc anywhere is needed for that.
(Tried and gave up on two alternative approaches before the one committed here.)
Small refactor of main places in the code where a pv is added to a
vg into a small function which adds the pv to the list and updates
the vg counts.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
In add_pv_to_vg(), we should only add the pv to vg->pvs after all
internal checks have passed. The check for vg->extent_count exeeding
maximum was after we added the pv to the list, so this function could
return a state of vg->pvs that did not reflect other parameters such
as vg->pv_count.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
