IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Coverity noticed this function may return untouched buffer,
however in this state can't really happen, but anyway
ensure on error path the buffer will have zero lenght string.
Fixing problem, when user sets volume_list and excludes thin pools
from activation. In this case pool return 'success' for skipped activation.
We need to really check the volume it is actually active to properly
to remove queued pool messages. Otherwise the lvm2 and kernel
metadata started to go async since lvm2 believed, messages were submitted.
Add also better check for threshold when create a new thin volume.
In this case we require local activation of thin pool so we are able
to check pool fullness.
This patch makes the keyword combinations found in "lv_layout" and
"lv_role" much more understandable - there were some ambiguities
for some of the combinations which lead to confusion before.
Now, the scheme used is:
LAYOUTS ("how the LV is laid out"):
===================================
[linear] (all segments have number of stripes = 1)
[striped] (all segments have number of stripes > 1)
[linear,striped] (mixed linear and striped)
raid (raid layout always reported together with raid level, raid layout == image + metadata LVs underneath that make up raid LV)
[raid,raid1]
[raid,raid10]
[raid,raid4]
[raid,raid5] (exact sublayout not specified during creation - default one used - raid5_ls)
[raid,raid5,raid5_ls]
[raid,raid5,raid6_rs]
[raid,raid5,raid5_la]
[raid,raid5,raid5_ra]
[raid6,raid] (exact sublayout not specified during creation - default one used - raid6_zr)
[raid,raid6,raid6_zr]
[raid,raid6,raid6_nc]
[raid,raid6,raid6_ns]
[mirror] (mirror layout == log + image LVs underneath that make up mirror LV)
thin (thin layout always reported together with sublayout)
[thin,sparse] (thin layout == allocated out of thin pool)
[thin,pool] (thin pool layout == data + metadata volumes underneath that make up thin pool LV, not supposed to be used for direct use!!!)
[cache] (cache layout == allocated out of cache pool in conjunction with cache origin)
[cache,pool] (cache pool layout == data + metadata volumes underneath that make up cache pool LV, not supposed to be used for direct use!!!)
[virtual] (virtual layout == not hitting disk underneath, currently this layout denotes only 'zero' device used for origin,thickorigin role)
[unknown] (either error state or missing recognition for such layout)
ROLES ("what's the purpose or use of the LV - what is its role"):
=================================================================
- each LV has either of these two roles at least: [public] (public LV that users may use freely to write their data to)
[public] (public LV that users may use freely to write their data to)
[private] (private LV that LVM maintains; not supposed to be directly used by user to write his data to)
- and then some special-purpose roles in addition to that:
[origin,thickorigin] (origin for thick-style snapshot; "thick" as opposed to "thin")
[origin,multithickorigin] (there are more than 2 thick-style snapshots for this origin)
[origin,thinorigin] (origin for thin snapshot)
[origin,multithinorigin] (there are more than 2 thin snapshots for this origin)
[origin,extorigin] (external origin for thin snapshot)
[origin,multiextoriginl (there are more than 2 thin snapshots using this external origin)
[origin,cacheorigin] (cache origin)
[snapshot,thicksnapshot] (thick-style snapshot; "thick" as opposed to "thin")
[snapshot,thinsnapshot] (thin-style snapshot)
[raid,metadata] (raid metadata LV)
[raid,image] (raid image LV)
[mirror,image] (mirror image LV)
[mirror,log] (mirror log LV)
[pvmove] (pvmove LV)
[thin,pool,data] (thin pool data LV)
[thin,pool,metadata] (thin pool metadata LV)
[cache,pool,data] (cache pool data LV)
[cache,pool,metadata] (cache pool metadata LV)
[pool,spare] (pool spare LV - common role of LV that makes it used for both thin and cache repairs)
This makes it a bit more readable since we can report more general
layouts/roles first and keywords describing the LV more precisely
afterwards in the list.
The 'lv_type' field name was a bit misleading. Better one is 'lv_role'
since this fields describes what's the actual use of the LV currently -
its 'role'.
Sort out the lvresize calculation code to handle size changes
specified as physical extents as well as logical extents
and to process mirror resizing and raid extensions correctly.
The 'approx alloc' option was masking the underlying problem.
Avoid playing with +1.
PATH_MAX code needs probably more thinking anyway, since
there is no MAX path in Linux - user may easily create path
with 64kB chars - so 4kB buffer is surelly not enough for
such dirs.
Note:
http://insanecoding.blogspot.cz/2007/11/pathmax-simply-isnt.html
The lv_type_name function is remnant from old code that reported
only single string for the LV type. LV types are now reported
in a more extended way as keyword list that describe the type
precisely (using lv_layout_and_type fn).
The lv_type_name was used in some error messages to display the
type of the LV so just reinstate the old messages back referencing
the type directly with a string - this is enough for error messages.
They don't need to display the LV type as precisely as it's used
on lvs output (which is optimized for selection anyway).
$ lvs -a -o name,vg_name,attr,layout,type
LV VG Attr Layout Type
lvol0 vg -wI-a----- linear linear
[pvmove0] vg p-C-aom--- mirror mirror,pvmove
(added "mirror" for pvmove LV)
$ lvs -a -o name,vg_name,attr,layout,type
LV VG Attr Layout Type
lvol0 vg ori------- linear external,multiple,origin,thin
[lvol1_pmspare] vg ewi------- linear metadata,pool,spare
lvol2 vg Vwi-a-tz-- thin snapshot,thin
lvol3 vg Vwi-a-tz-- thin snapshot,thin
pool vg twi-a-tz-- pool,thin pool,thin
[pool_tdata] vg Twi-ao---- linear data,pool,thin
[pool_tmeta] vg ewi-ao---- linear metadata,pool,thin
(added "multiple" for external origin used for more than one
thin snapshot - lvol0 in the example above)
Thin snapshots having external origins missed the "snapshot" keyword for
lv_type field. Also, thin external origins which are thin devices (from
another pool) were not recognized properly.
For example, external origin itself can be either non-thin volume (lvol0
below) or it can be a thin volume from another pool (lvol3 below):
Before this patch:
$ lvs -o name,vg_name,attr,pool_lv,origin,layout,type
Internal error: Failed to properly detect layout and type for for LV vg/lvol3
Internal error: Failed to properly detect layout and type for for LV vg/lvol3
LV VG Attr Pool Origin Layout Type
lvol0 vg ori------- linear external,origin,thin
lvol2 vg Vwi-a-tz-- pool lvol0 thin thin
lvol3 vg ori---tz-- pool unknown external,origin,thin,thin
lvol4 vg Vwi-a-tz-- pool1 lvol3 thin thin
pool vg twi-a-tz-- pool,thin pool,thin
pool1 vg twi-a-tz-- pool,thin pool,thin
- lvol2 as well as lvol4 have missing "snapshot" in type field
- lvol3 has unrecognized layout (should be "thin"), but has double
"thin" in lv_type which is incorrect
- (also there's double "for" in the internal error message)
With this patch applied:
$ lvs -o name,vg_name,attr,pool_lv,origin,layout,type
LV VG Attr Pool Origin Layout Type
lvol0 vg ori------- linear external,origin,thin
lvol2 vg Vwi-a-tz-- pool lvol0 thin snapshot,thin
lvol3 vg ori---tz-- pool thin external,origin,thin
lvol4 vg Vwi-a-tz-- pool1 lvol3 thin snapshot,thin
pool vg twi-a-tz-- pool,thin pool,thin
pool1 vg twi-a-tz-- pool,thin pool,thin
The maximum stripe size is equal to the volume group PE size. If that
size falls below the STRIPE_SIZE_MIN, the creation of RAID 4/5/6 volumes
becomes impossible. (The kernel will fail to load a RAID 4/5/6 mapping
table with a stripe size less than STRIPE_SIZE_MIN.) So, we report an
error if it is attempted.
This is very rare because reducing the PE size down that far limits the
size of the PV below that of modern devices.
metadata/lv_manip.c:269: warning: declaration of "snapshot_count" shadows a global declaration
There's existing function called "snapshot_count" so rename the
variable to "snap_count".
The lv_layout and lv_type fields together help with LV identification.
We can do basic identification using the lv_attr field which provides
very condensed view. In contrast to that, the new lv_layout and lv_type
fields provide more detialed information on exact layout and type used
for LVs.
For top-level LVs which are pure types not combined with any
other LV types, the lv_layout value is equal to lv_type value.
For non-top-level LVs which may be combined with other types,
the lv_layout describes the underlying layout used, while the
lv_type describes the use/type/usage of the LV.
These two new fields are both string lists so selection (-S/--select)
criteria can be defined using the list operators easily:
[] for strict matching
{} for subset matching.
For example, let's consider this:
$ lvs -a -o name,vg_name,lv_attr,layout,type
LV VG Attr Layout Type
[lvol1_pmspare] vg ewi------- linear metadata,pool,spare
pool vg twi-a-tz-- pool,thin pool,thin
[pool_tdata] vg rwi-aor--- level10,raid data,pool,thin
[pool_tdata_rimage_0] vg iwi-aor--- linear image,raid
[pool_tdata_rimage_1] vg iwi-aor--- linear image,raid
[pool_tdata_rimage_2] vg iwi-aor--- linear image,raid
[pool_tdata_rimage_3] vg iwi-aor--- linear image,raid
[pool_tdata_rmeta_0] vg ewi-aor--- linear metadata,raid
[pool_tdata_rmeta_1] vg ewi-aor--- linear metadata,raid
[pool_tdata_rmeta_2] vg ewi-aor--- linear metadata,raid
[pool_tdata_rmeta_3] vg ewi-aor--- linear metadata,raid
[pool_tmeta] vg ewi-aor--- level1,raid metadata,pool,thin
[pool_tmeta_rimage_0] vg iwi-aor--- linear image,raid
[pool_tmeta_rimage_1] vg iwi-aor--- linear image,raid
[pool_tmeta_rmeta_0] vg ewi-aor--- linear metadata,raid
[pool_tmeta_rmeta_1] vg ewi-aor--- linear metadata,raid
thin_snap1 vg Vwi---tz-k thin snapshot,thin
thin_snap2 vg Vwi---tz-k thin snapshot,thin
thin_vol1 vg Vwi-a-tz-- thin thin
thin_vol2 vg Vwi-a-tz-- thin multiple,origin,thin
Which is a situation with thin pool, thin volumes and thin snapshots.
We can see internal 'pool_tdata' volume that makes up thin pool has
actually a level10 raid layout and the internal 'pool_tmeta' has
level1 raid layout. Also, we can see that 'thin_snap1' and 'thin_snap2'
are both thin snapshots while 'thin_vol1' is thin origin (having
multiple snapshots).
Such reporting scheme provides much better base for selection criteria
in addition to providing more detailed information, for example:
$ lvs -a -o name,vg_name,lv_attr,layout,type -S 'type=metadata'
LV VG Attr Layout Type
[lvol1_pmspare] vg ewi------- linear metadata,pool,spare
[pool_tdata_rmeta_0] vg ewi-aor--- linear metadata,raid
[pool_tdata_rmeta_1] vg ewi-aor--- linear metadata,raid
[pool_tdata_rmeta_2] vg ewi-aor--- linear metadata,raid
[pool_tdata_rmeta_3] vg ewi-aor--- linear metadata,raid
[pool_tmeta] vg ewi-aor--- level1,raid metadata,pool,thin
[pool_tmeta_rmeta_0] vg ewi-aor--- linear metadata,raid
[pool_tmeta_rmeta_1] vg ewi-aor--- linear metadata,raid
(selected all LVs which are related to metadata of any type)
lvs -a -o name,vg_name,lv_attr,layout,type -S 'type={metadata,thin}'
LV VG Attr Layout Type
[pool_tmeta] vg ewi-aor--- level1,raid metadata,pool,thin
(selected all LVs which hold metadata related to thin)
lvs -a -o name,vg_name,lv_attr,layout,type -S 'type={thin,snapshot}'
LV VG Attr Layout Type
thin_snap1 vg Vwi---tz-k thin snapshot,thin
thin_snap2 vg Vwi---tz-k thin snapshot,thin
(selected all LVs which are thin snapshots)
lvs -a -o name,vg_name,lv_attr,layout,type -S 'layout=raid'
LV VG Attr Layout Type
[pool_tdata] vg rwi-aor--- level10,raid data,pool,thin
[pool_tmeta] vg ewi-aor--- level1,raid metadata,pool,thin
(selected all LVs with raid layout, any raid layout)
lvs -a -o name,vg_name,lv_attr,layout,type -S 'layout={raid,level1}'
LV VG Attr Layout Type
[pool_tmeta] vg ewi-aor--- level1,raid metadata,pool,thin
(selected all LVs with raid level1 layout exactly)
And so on...
_pvcreate_check() has two missing requirements:
After refreshing filters there must be a rescan.
(Otherwise the persistent filter may remain empty.)
After wiping a signature, the filters must be refreshed.
(A device that was previously excluded by the filter due to
its signature might now need to be included.)
If several devices are added at once, the repeated scanning isn't
strictly needed, but we can address that later as part of the command
processing restructuring (by grouping the devices).
Replace the new pvcreate code added by commit
54685c20fc "filters: fix regression caused
by commit e80884cd080cad7e10be4588e3493b9000649426"
with this change to _pvcreate_check().
The filter refresh problem dates back to commit
acb4b5e4de "Fix pvcreate device check."
If using persistent filter and we're refreshing filters (just like we
do for pvcreate now after commit 54685c20fc),
we can't rely on getting the primary device of the partition from the cache
as such device could be already filtered by persistent filter and we get
a device cache lookup failure for such device.
For example:
$ lvm dumpconfig --type diff
devices {
obtain_device_list_from_udev=0
}
$lsblk /dev/sda
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 128M 0 disk
`-sda1 8:1 0 127M 0 part
$cat /etc/lvm/cache/.cache | grep sda
"/dev/sda1",
$pvcreate /dev/sda1
dev_is_mpath: failed to get device for 8:1
Physical volume "/dev/sda1" successfully created
The problematic part of the code called dev_cache_get_by_devt
to get the device for the device number supplied. Then the code
used dev_name(dev) to get the name which is then used in check
whether there's any mpath on top of this dev...
This patch uses sysfs to get the base name for the partition
instead, hence avoiding the device cache which is a correct
approach here.
The message "Cannot deactivate remotely exclusive device locally." makes
sense only for clustered LV. If the LV is non-clustered, then it's
always exclusive by definition and if it's already deactivated, this
message pops up inappropriately as those two conditions are met.
So issue the message only if the conditions are met AND we have clustered VG.
Commit e80884cd08 tried to dump filters
for them to be reevaluated when creating a PV to avoid overwriting
any existing signature that may have been created after last
scan/filtering.
However, we need to call refresh_filters instead of
persistent_filter->dump since dump requires proper rescannig to fill
up the persistent filter again. However, this is true only for pvcreate
but not for vgcreate with PV creation where the scanning happens before
this PV creation and hence the next rescan (if not full scan), does not
fill the persistent filter.
Also, move refresh_filters so that it's called sooner and only for
pvcreate, vgcreate already calls lvmcache_label_scan(cmd, 2) which
then calls refresh_filters itself, so no need to reevaluate this again.
This caused the persistent filter (/etc/lvm/cache/.cache file) to be
wrong and contain only the PV just being processed with
vgcreate <vg_name> <pv_name_to_create>.
This regression caused other block devices to be filtered out in case
the vgcreate with PV creation was used and then the persistent filter
is used by any other LVM command afterwards.
Make lvresize -l+%FREE support approximate allocation.
Move existing "Reducing/Extending' message to verbose level
and change it to say 'up to' if approximate allocation is being used.
Replace it with a new message that gives the actual old and new size or
says 'unchanged'.
This is addendum to commit 2e82a070f3
which fixed these spurious messages that appeared after commit
651d5093ed ("avoid pv_read in
find_pv_by_name").
There was one more "not found" message issued in case the device
could not be found in device cache (commit 2e82a07 fixed this only
for PV lookup itself). But if we "allow_unformatted" for
find_pv_by_name, we should not issue this message even in case
the device can't be found in dev cache as we just need to know
whether there's a PV or not for the code to decide on next steps
and we don't want to issue any messages if either device itself
is not found or PV is not found.
For example, when we were creating a new PV (and so allow_unformatted = 1)
and the device had a signature on it which caused it to be filtered
by device filter (e.g. MD signature if md filtering is enabled),
or it was part of some other subsystem (e.g. multipath), this message
was issued on find_pv_by_name call which was misleading.
Also, remove misleading "stack" call in case find_pv_by_name
returns NULL in pvcreate_check - any error state is reported
later by pvcreate_check code so no need to "stack" here.
There's one more and proper check to issue "not found" message if
the device can't be found in device cache within pvcreate_check fn
so this situation is still covered properly later in the code.
Before this patch (/dev/sda contains MD signature and is therefore filtered):
$ pvcreate /dev/sda
Physical volume /dev/sda not found
WARNING: linux_raid_member signature detected on /dev/sda at offset 4096. Wipe it? [y/n]:
With this patch applied:
$ pvcreate /dev/sda
WARNING: linux_raid_member signature detected on /dev/sda at offset 4096. Wipe it? [y/n]:
Non-existent devices are still caught properly:
$ pvcreate /dev/sdx
Device /dev/sdx not found (or ignored by filtering).
2.02.106 added suffixes to some LV uuids in the kernel.
If any of these LVs is activated with 2.02.105 or earlier,
and then a later version is used, the LVs appear invisible and
activation commands fail.
The code now has to check the kernel for both old and new uuids.
Fix get_pool_params to only read params.
Add poolmetadataspare option to get_pool_params.
Move all profile code into update_pool_params.
Move recalculate code into pool_manip.c
Few unecessary comments were written to on-disc metadata.
Use outfc() to have comments only in archived files.
(may also save couple bytes in ringbuffer).
TODO: needed validation against newline char...
Cache pools are similar as with thin pools.
Add (needs %s) - since cache has currently
a bit strange need for extra few kb over
our default 4M extent size so make it more obvious.
When EOF is detect - it could be either 'Ctrl+C'
or empty stdin.
For Ctrl+C there is visual ^C sign.
For EOF print 'n' so decision is clear in debug print.
This is addendum for commit 6dc7b783c8.
LVM1 format stores the ALLOCATABLE flag directly in PV header, not
in VG metadata. So the code needs to be fixed further to work
properly for lvm1 format so that the correct PV header is written
(the flag is set only if the PV is in some VG, unset otherwise).
Before the patch:
$ lvs -o name,active vg/lvol1 --driverloaded n
WARNING: Activation disabled. No device-mapper interaction will beattempted.
LV Active
lvol1 active
With this patch applied:
$ lvs -o name,active vg/lvol1 --driverloaded n
WARNING: Activation disabled. No device-mapper interaction will be attempted.
LV Active
lvol1 unknown
The same for active_{locally,remotely,exclusively} fields.
Also, rename headings for these fields (ActLocal/ActRemote/ActExcl).
If the lv_info call fails for whatever reason/INFO dm ioctl fails or
the dm driver communication is disabled (--driverloaded n), make
sure we always display "unknown" for LVSINFO fields as that's exactly
what happens - we don't know the state.
Before the patch:
$ lvs -o name,device_open --driverloaded n
WARNING: Activation disabled. No device-mapper interaction will be attempted.
Command failed with status code 5.
With this patch applied:
$ lvs -o name,device_open --driverloaded n
WARNING: Activation disabled. No device-mapper interaction will be attempted.
LV DevOpen
lvol1 unknown
Like other binary fields we already have:
$ lvs -o name,zero vg/lvx vg/pool vg/pool1
LV Zero
lvx unknown
pool
pool1 zero
$ lvs -o name,zero vg/lvx vg/pool vg/pool1 --binary
LV Zero
lvx -1
pool 0
pool1 1
Currently, we have two modes of activation, an unnamed nominal mode
(which I will refer to as "complete") and "partial" mode. The
"complete" mode requires that a volume group be 'complete' - that
is, no missing PVs. If there are any missing PVs, no affected LVs
are allowed to activate - even RAID LVs which might be able to
tolerate a failure. The "partial" mode allows anything to be
activated (or at least attempted). If a non-redundant LV is
missing a portion of its addressable space due to a device failure,
it will be replaced with an error target. RAID LVs will either
activate or fail to activate depending on how badly their
redundancy is compromised.
This patch adds a third option, "degraded" mode. This mode can
be selected via the '--activationmode {complete|degraded|partial}'
option to lvchange/vgchange. It can also be set in lvm.conf.
The "degraded" activation mode allows RAID LVs with a sufficient
level of redundancy to activate (e.g. a RAID5 LV with one device
failure, a RAID6 with two device failures, or RAID1 with n-1
failures). RAID LVs with too many device failures are not allowed
to activate - nor are any non-redundant LVs that may have been
affected. This patch also makes the "degraded" mode the default
activation mode.
The degraded activation mode does not yet work in a cluster. A
new cluster lock flag (LCK_DEGRADED_MODE) will need to be created
to make that work. Currently, there is limited space for this
extra flag and I am looking for possible solutions. One possible
solution is to usurp LCK_CONVERT, as it is not used. When the
locking_type is 3, the degraded mode flag simply gets dropped and
the old ("complete") behavior is exhibited.
We have 1/"descriptive word"/"yes" for 1 and 0/"no" for 0.
For example (the new recognized values are "yes" and "no"):
$ lvs -o name,device_open fedora vg/lvol1 vg/lvol2
LV DevOpen
root open
swap open
lvol1 open
lvol2
$ lvs -o name,device_open fedora vg/lvol1 vg/lvol2 -S 'device_open=open'
LV DevOpen
root open
swap open
lvol1 open
$ lvs -o name,device_open fedora vg/lvol1 vg/lvol2 -S 'device_open=1'
LV DevOpen
root open
swap open
lvol1 open
$ lvs -o name,device_open fedora vg/lvol1 vg/lvol2 -S 'device_open=yes'
LV DevOpen
root open
swap open
lvol1 open
$ lvs -o name,device_open fedora vg/lvol1 vg/lvol2 -S 'device_open=0'
LV DevOpen
lvol2
$ lvs -o name,device_open fedora vg/lvol1 vg/lvol2 -S 'device_open=no'
LV DevOpen
lvol2
So all attribute reporting functions are all in one section of code
for quick orientation (all these functions are defined in the order
of their attribute character displayed in pv/vg/lv_attr field).
lv_active_{locally,remotely,exclusively} display the original
"lv_active" field in a more separate way so that we can create
selection criteria in a binary-based form (yes/no).
The macros for reserved value definition makes the process a bit easier,
but there's still a place for improvement and make this even more
transparent. We can optimize and provide better automatism here later on.
Also respect --binary arg and/or report/binary_values_as_numeric
when displaying unknown values. If textual form is used, use "unknown",
if numeric value is used, use "-1" (which we already use to denote
unknown numeric values in other reports like lv_kernel_major and
lv_kernel_minor).
All binary attr fields have synonyms so selection criteria can use
either 0/1 or words to match against the field value (base type
for these binary fields is numeric one - DM_REPORT_FIELD_TYPE_NUMBER
so words are registered as reserved values):
pv_allocatable - "allocatable"
pv_exported - "exported"
pv_missing - "missing"
vg_extendable - "extendable"
vg_exported - "exported"
vg_partial - "partial"
vg_clustered - "clustered"
lv_initial_image_sync - "initial image sync", "sync"
lv_image_synced_names - "image synced", "synced"
lv_merging_names - "merging"
lv_converting_names - "converting"
lv_allocation_locked - "allocation locked", "locked"
lv_fixed_minor - "fixed minor", "fixed"
lv_merge_failed - "merge failed", "failed"
For example, these three are all equivalent:
$ lvs -o name,fixed_minor -S 'fixed_minor=fixed'
LV FixMin
lvol8 fixed minor
$ lvs -o name,fixed_minor -S 'fixed_minor="fixed minor"'
LV FixMin
lvol8 fixed minor
$ lvs -o name,fixed_minor -S 'fixed_minor=1'
LV FixMin
lvol8 fixed minor
The same with binary output - it has no effect on this functionality:
$ lvs -o name,fixed_minor --binary -S 'fixed_minor=fixed'
LV FixMin
lvol8 1
$ lvs -o name,fixed_minor --binary -S 'fixed_minor="fixed
minor"'
LV FixMin
lvol8 1
[1] f20/~ # lvs -o name,fixed_minor --binary -S 'fixed_minor=1'
LV FixMin
lvol8 1
The --binary option, if used, causes all the binary values reported
in reporting commands to be displayed as "0" or "1" instead of descriptive
literal values (value "unknown" is still used for values that could not be
determined).
Also, add report/binary_values_as_numeric lvm.conf option with the same
functionality as the --binary option (the --binary option prevails
if both --binary cmd option and report/binary_values_as_numeric lvm.conf
option is used at the same time). The report/binary_values_as_numeric is
also profilable.
This makes it easier to use and check lvm reporting command output in scripts.
Physical Volume Fields:
pv_allocatable - Whether this device can be used for allocation.
pv_exported - Whether this device is exported.
pv_missing - Whether this device is missing in system.
Volume Group Fields:
vg_permissions - VG permissions.
vg_extendable - Whether VG is extendable.
vg_exported - Whether VG is exported.
vg_partial - Whether VG is partial.
vg_allocation_policy - VG allocation policy.
vg_clustered - Whether VG is clustered.
Logical Volume Fields:
lv_volume_type - LV volume type.
lv_initial_image_sync - Whether mirror/RAID images underwent initial resynchronization.
lv_image_synced - Whether mirror/RAID image is synchronized.
lv_merging - Whether snapshot LV is being merged to origin.
lv_converting - Whether LV is being converted.
lv_allocation_policy - LV allocation policy.
lv_allocation_locked - Whether LV is locked against allocation changes.
lv_fixed_minor - Whether LV has fixed minor number assigned.
lv_merge_failed - Whether snapshot merge failed.
lv_snapshot_invalid - Whether snapshot LV is invalid.
lv_target_type - Kernel target type the LV is related to.
lv_health_status - LV health status.
lv_skip_activation - Whether LV is skipped on activation.
Logical Volume Info Fields
lv_permissions - LV permissions.
lv_suspended - Whether LV is suspended.
lv_live_table - Whether LV has live table present.
lv_inactive_table - Whether LV has inactive table present.
lv_device_open - Whether LV device is open.
LVSINFO is exactly the same as existing LVS report type,
but it has the "struct lvinfo" populated in addition for
use - this is useful for fields that display the status
of the LV device itself (e.g. suspended state, tables
present/missing...).
Currently, such properties are reported within the "lv_attr"
field so separation is unnecessary - the "lvinfo" call
to populate the "struct lvinfo" is directly a part of the
field reporting function - _lvstatus_disp/lv_attr_dup.
With upcoming patches, we'd like the lv_attr field bits
to be separated into their own fields. To avoid calling
"lvinfo" fn as many times as there are fields requiring
the "lv_info" structure to be populated while reporting
one row related to one LV, we're separating former LVS
into LVS and LVSINFO report type. With this, there's
just one "lvinfo" call for one report row and LV reporting
fields will take the info needed from this struct then,
hence reusing it and not calling "lvinfo" fn on their own.
The get_lv_type_name helps with translating volume type
to human readable form (can be used in reports or
various messages if needed).
The lv_is_linear and lv_is_striped complete the set of
lv_is_* functions that identify exact volume types.
Mention parent LV as well as the LV triggering the warning.
Still leaves some confusing cases but its not worth fixing them
at the moment.
(Thin pool inactive but a thin volume active => deactivate thin vol.
Inactive mirror/raid with pvmove in progress => complete pvmove and
active&deactivate mirror/raid.
If new VG already exists it requires some LVs to be inactive
unnecessarily.)
Support remove of thin volumes With --force --force
when thin pools is damaged.
This way it's possible to remove thin pool with
unrepairable metadata without requiring to
manually edit lvm2 metadata.
lvremove -ff vg/pool
removes all thin volumes and pool even when
thin pool cannot be activated (to accept
removal of thin volumes in kernel metadata)
Using suffixes for mirrors and raids will need more work,
before this could be enabled.
Meanwhile revert to previous behavior.
Keep suffixes for thins and caches.
Since vg_name inside /lib function has already been ignored mostly
except for a few debug prints - make it and official internal API
feature.
vg_name is used only in /tools while the VG is not yet openned,
and when lvresize/lvcreate /lib function is called with VG pointer
already being used, then vg_name becomes irrelevant (it's not been
validated anyway).
So any internal user of lvcreate_params and lvresize_params does not
need to set vg_name pointer and may leave it NULL.
Use suffixes for easier detection of private volumes.
This commit makes older volume UUIDs incompatible and
it most probably needs machine reboot after upgrade.
When creating pool's metadata - create initial LV for clearing with some
generic name and after the volume is create & cleared - rename it to
reserved name '_tmeta/_cmeta'.
We should not expose 'reserved' names for public LVs.
When repairing RAID LVs that have multiple PVs per image, allow
replacement images to be reallocated from the PVs that have not
failed in the image if there is sufficient space.
This allows for scenarios where a 2-way RAID1 is spread across 4 PVs,
where each image lives on two PVs but doesn't use the entire space
on any of them. If one PV fails and there is sufficient space on the
remaining PV in the image, the image can be reallocated on just the
remaining PV.
Previously, the seg_pvs used to track free and allocated space where left
in place after 'release_pv_segment' was called to free space from an LV.
Now, an attempt is made to combine any adjacent seg_pvs that also track
free space. Usually, this doesn't provide much benefit, but in a case
where one command might free some space and then do an allocation, it
can make a difference. One such case is during a repair of a RAID LV,
where one PV of a multi-PV image fails. This new behavior is used when
the replacement image can be allocated from the remaining space of the
PV that did not fail. (First the entire image with the failed PV is
removed. Then the image is reallocated from the remaining PVs.)
I've changed build_parallel_areas_from_lv to take a new parameter
that allows the caller to build parallel areas by LV vs by segment.
Previously, the function created a list of parallel areas for each
segment in the given LV. When it came time for allocation, the
parallel areas were honored on a segment basis. This was problematic
for RAID because any new RAID image must avoid being placed on any
PVs used by other images in the RAID. For example, if we have a
linear LV that has half its space on one PV and half on another, we
do not want an up-convert to use either of those PVs. It should
especially not wind up with the following, where the first portion
of one LV is paired up with the second portion of the other:
------PV1------- ------PV2-------
[ 2of2 image_1 ] [ 1of2 image_1 ]
[ 1of2 image_0 ] [ 2of2 image_0 ]
---------------- ----------------
Previously, it was possible for this to happen. The change makes
it so that the returned parallel areas list contains one "super"
segment (seg_pvs) with a list of all the PVs from every actual
segment in the given LV and covering the entire logical extent range.
This change allows RAID conversions to function properly when there
are existing images that contain multiple segments that span more
than one PV.
...to avoid using cached value (persistent filter) and therefore
not noticing any change made after last scan/filtering - the state
of the device may have changed, for example new signatures added.
$ lvm dumpconfig --type diff
allocation {
use_blkid_wiping=0
}
devices {
obtain_device_list_from_udev=0
}
$ cat /etc/lvm/cache/.cache | grep sda
$ vgscan
Reading all physical volumes. This may take a while...
Found volume group "fedora" using metadata type lvm2
$ cat /etc/lvm/cache/.cache | grep sda
"/dev/sda",
$ parted /dev/sda mklabel gpt
Information: You may need to update /etc/fstab.
$ parted /dev/sda print
Model: QEMU QEMU HARDDISK (scsi)
Disk /dev/sda: 134MB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags:
Number Start End Size File system Name Flags
$ cat /etc/lvm/cache/.cache | grep sda
"/dev/sda",
====
Before this patch:
$ pvcreate /dev/sda
Physical volume "/dev/sda" successfully created
With this patch applied:
$ pvcreate /dev/sda
Physical volume /dev/sda not found
Device /dev/sda not found (or ignored by filtering).
Take a local file lock to prevent concurrent activation/deactivation of LVs.
Thin/cache types and an extension for cluster support are excluded for
now.
'lvchange -ay $lv' and 'lvchange -an $lv' should no longer cause trouble
if issued concurrently: the new lock should make sure they
activate/deactivate $lv one-after-the-other, instead of overlapping.
(If anyone wants to experiment with the cluster patch, please get in touch.)
'lvs' would segfault if trying to display the "move pv" if the
pvmove was run with '--atomic'. The structure of an atomic pvmove
is different and requires us to descend another level in the
LV tree to retrieve the PV information.
In 'find_pvmove_lv', separate the code that searches the atomic
pvmove LVs from the code that searches the normal pvmove LVs. This
cleans up the segment iterator code a bit.
replicator/replicator.c:338:2: warning: passing argument 2 of 'build_dm_uuid' from incompatible pointer type [enabled by default]
replicator/replicator.c:629:3: warning: passing argument 2 of 'build_dm_uuid' from incompatible pointer type [enabled by default]
replicator/replicator.c:644:6: warning: passing argument 2 of 'build_dm_uuid' from incompatible pointer type [enabled by default]
replicator/replicator.c:668:7: warning: passing argument 2 of 'build_dm_uuid' from incompatible pointer type [enabled by default]
replicator/replicator.c:677:4: warning: passing argument 2 of 'build_dm_uuid' from incompatible pointer type [enabled by default]
pvmove can be used to move single LVs by name or multiple LVs that
lie within the specified PV range (e.g. /dev/sdb1:0-1000). When
moving more than one LV, the portions of those LVs that are in the
range to be moved are added to a new temporary pvmove LV. The LVs
then point to the range in the pvmove LV, rather than the PV
range.
Example 1:
We have two LVs in this example. After they were
created, the first LV was grown, yeilding two segments
in LV1. So, there are two LVs with a total of three
segments.
Before pvmove:
--------- --------- ---------
| LV1s0 | | LV2s0 | | LV1s1 |
--------- --------- ---------
| | |
-------------------------------------
PV | 000 - 255 | 256 - 511 | 512 - 767 |
-------------------------------------
After pvmove inserts the temporary pvmove LV:
--------- --------- ---------
| LV1s0 | | LV2s0 | | LV1s1 |
--------- --------- ---------
| | |
-------------------------------------
pvmove0 | seg 0 | seg 1 | seg 2 |
-------------------------------------
| | |
-------------------------------------
PV | 000 - 255 | 256 - 511 | 512 - 767 |
-------------------------------------
Each of the affected LV segments now point to a
range of blocks in the pvmove LV, which purposefully
corresponds to the segments moved from the original
LVs into the temporary pvmove LV.
The current implementation goes on from here to mirror the temporary
pvmove LV by segment. Further, as the pvmove LV is activated, only
one of its segments is actually mirrored (i.e. "moving") at a time.
The rest are either complete or not addressed yet. If the pvmove
is aborted, those segments that are completed will remain on the
destination and those that are not yet addressed or in the process
of moving will stay on the source PV. Thus, it is possible to have
a partially completed move - some LVs (or certain segments of LVs)
on the source PV and some on the destination.
Example 2:
What 'example 1' might look if it was half-way
through the move.
--------- --------- ---------
| LV1s0 | | LV2s0 | | LV1s1 |
--------- --------- ---------
| | |
-------------------------------------
pvmove0 | seg 0 | seg 1 | seg 2 |
-------------------------------------
| | |
| -------------------------
source PV | | 256 - 511 | 512 - 767 |
| -------------------------
| ||
-------------------------
dest PV | 000 - 255 | 256 - 511 |
-------------------------
This update allows the user to specify that they would like the
pvmove mirror created "by LV" rather than "by segment". That is,
the pvmove LV becomes an image in an encapsulating mirror along
with the allocated copy image.
Example 3:
A pvmove that is performed "by LV" rather than "by segment".
--------- ---------
| LV1s0 | | LV2s0 |
--------- ---------
| |
-------------------------
pvmove0 | * LV-level mirror * |
-------------------------
/ \
pvmove_mimage0 / pvmove_mimage1
------------------------- -------------------------
| seg 0 | seg 1 | | seg 0 | seg 1 |
------------------------- -------------------------
| | | |
------------------------- -------------------------
| 000 - 255 | 256 - 511 | | 000 - 255 | 256 - 511 |
------------------------- -------------------------
source PV dest PV
The thing that differentiates a pvmove done in this way and a simple
"up-convert" from linear to mirror is the preservation of the
distinct segments. A normal up-convert would simply allocate the
necessary space with no regard for segment boundaries. The pvmove
operation must preserve the segments because they are the critical
boundary between the segments of the LVs being moved. So, when the
pvmove copy image is allocated, all corresponding segments must be
allocated. The code that merges ajoining segments that are part of
the same LV when the metadata is written must also be avoided in
this case. This method of mirroring is unique enough to warrant its
own definitional macro, MIRROR_BY_SEGMENTED_LV. This joins the two
existing macros: MIRROR_BY_SEG (for original pvmove) and MIRROR_BY_LV
(for user created mirrors).
The advantages of performing pvmove in this way is that all of the
LVs affected can be moved together. It is an all-or-nothing approach
that leaves all LV segments on the source PV if the move is aborted.
Additionally, a mirror log can be used (in the future) to provide tracking
of progress; allowing the copy to continue where it left off in the event
there is a deactivation.
The differentiation of the original number field into number, size and
percent field types has been introduced with recent changes for report
selection support.
Make dm_report_init_with_selection to accept an argument with an
array of reserved values where each element contains a triple:
{dm report field type, reserved value, array of strings representing this value}
When the selection is parsed, we always check whether a string
representation of some reserved value is not hit and if it is,
we use the reserved value assigned for this string instead of
trying to parse it as a value of certain field type.
This makes it possible to define selections like:
... --select lv_major=undefined (or -1 or unknown or undef or whatever string representations are registered for this reserved value in the future)
... --select lv_read_ahead=auto
... --select vg_mda_copies=unmanaged
With this, each time the field value of certain type is hit
and when we compare it with the selection, we use the proper
value for comparison.
For now, register these reserved values that are used at the moment
(also more descriptive names are used for the values):
const uint64_t _reserved_number_undef_64 = UINT64_MAX;
const uint64_t _reserved_number_unmanaged_64 = UINT64_MAX - 1;
const uint64_t _reserved_size_auto_64 = UINT64_MAX;
{
{DM_REPORT_FIELD_TYPE_NUMBER, _reserved_number_undef_64, {"-1", "undefined", "undef", "unknown", NULL}},
{DM_REPORT_FIELD_TYPE_NUMBER, _reserved_number_unmanaged_64, {"unmanaged", NULL}},
{DM_REPORT_FIELD_TYPE_SIZE, _reserved_size_auto_64, {"auto", NULL}},
NULL
}
Same reserved value of different field types do not collide.
All arrays are null-terminated.
The list of reserved values is automatically displayed within
selection help output:
Selection operands
------------------
...
Reserved values
---------------
-1, undefined, undef, unknown - Reserved value for undefined numeric value. [number]
unmanaged - Reserved value for unmanaged number of metadata copies in VG. [number]
auto - Reserved value for size that is automatically calculated. [size]
Selection operators
-------------------
...
The {pv,vg,lv,seg}_tags and lv_modules fields are reported as string
lists using the new dm_report_field_string_list - so we just pass
the list to the fn that takes care of reporting and item sorting itself.
The list of strings is used quite frequently and we'd like to reuse
this simple structure for report selection support too. Make it part
of libdevmapper for general reuse throughout the code.
This also simplifies the LVM code a bit since we don't need to
include and manage lvm-types.h anymore (the string list was the
only structure defined there).
This makes it easier to check against the fields (following patches for
report selection) and check whether size units are allowed or not
with the field value.
When creating a cache LV with a RAID origin, we need to ensure that
the sub-LVs of that origin properly change their names to include
the "_corig" extention of the top-level LV. We do this by first
performing a 'lv_rename_update' before making the call to
'insert_layer_for_lv'.
Internal reporting function cannot handle NULL reporting value,
so ensure there is at least dummy label.
So move dummy_lable from tools/reporter.c and use it for all
report_object() calls in lib/report/report.c.
(Fixes RHBZ 1108394)
Simlify lvm_report_object initialization.
Enable 'retry' deactivation also in 'cleanup' phase.
It shouldn't be mostly needed - however udev now produces
more and more completelny non-synchronizable device opens,
so even for orphan devices we can't easily predict where
udevd opens devices.
So it's more preferable here to log error about device being open
and retry clean, but let the command proceed.
And use ifdefs there, not exposing it in the tool code itself.
Later in the future, we should probably make the PIDFILE and
daemon checking code available also in case the daemon itself
is not built.
Accidently it's been commited - but it has also shown,
that on heavy loaded systems (like our test machine could be)
slightly bigger timeouts which waits longer for udev rules
processing does help and avoids occasional refuse of deactivation
because device is still being open.
(i.e. lvcreate...; lvchange -an...)
Unsure how we could now synchronize for this. On very slow(/loaded)
system 5 second timeout is simply not enough.
TODO: introduce at least lvm.conf configurable setting to
allow longer 'retry' loops.
Reindent lv_check_not_in_use to simplify internal loop code.
Also return always '0/1' (drop -1) - since we only
check for failure (0) - and we don't really know
why lv_info() has failed.
Disable code which has postprocessed whole tree and reset udev flags.
We need to find out which case was troublesome - since this loop
was just hidding bug in other code parts (most probably preload tree)
The dumpconfig now understands --commandprofile/--profile/--metadataprofile
The --commandprofile and --profile functionality is almost the same
with only one difference and that is that the --profile is just used
for dumping the content, it's not applied for the command itself
(while the --commandprofile profile is applied like it is done for
any other LVM command).
We also allow --metadataprofile for dumpconfig - dumpconfig *does not*
touch VG/LV and metadata in any way so it's OK to use it here (just for
dumping the content, checking the profile validity etc.).
The validity of the profile can be checked with:
dumpconfig --commandprofile/--profile/--metadataprofile --validate
...depending on the profile type.
Also, mention --config in the dumpconfig help string so users know
that dumpconfig handles this too (it did even before, but it was not
documented in the help string).
- When defining configuration source, the code now uses separate
CONFIG_PROFILE_COMMAND and CONFIG_PROFILE_METADATA markers
(before, it was just CONFIG_PROFILE that did not make the
difference between the two). This helps when checking the
configuration if it contains correct set of options which
are all in either command-profilable or metadata-profilable
group without mixing these groups together - so it's a firm
distinction. The "command profile" can't contain
"metadata profile" and vice versa! This is strictly checked
and if the settings are mixed, such profile is rejected and
it's not used. So in the end, the CONFIG_PROFILE_COMMAND
set of options and CONFIG_PROFILE_METADATA are mutually exclusive
sets.
- Marking configuration with one or the other marker will also
determine the way these configuration sources are positioned
in the configuration cascade which is now:
CONFIG_STRING -> CONFIG_PROFILE_COMMAND -> CONFIG_PROFILE_METADATA -> CONFIG_FILE/CONFIG_MERGED_FILES
- Marking configuration with one or the other marker will also make
it possible to issue a command context refresh (will be probably
a part of a future patch) if needed for settings in global profile
set. For settings in metadata profile set this is impossible since
we can't refresh cmd context in the middle of reading VG/LV metadata
and for each VG/LV separately because each VG/LV can have a different
metadata profile assinged and it's not possible to change these
settings at this level.
- When command profile is incorrect, it's rejected *and also* the
command exits immediately - the profile *must* be correct for the
command that was run with a profile to be executed. Before this
patch, when the profile was found incorrect, there was just the
warning message and the command continued without profile applied.
But it's more correct to exit immediately in this case.
- When metadata profile is incorrect, we reject it during command
runtime (as we know the profile name from metadata and not early
from command line as it is in case of command profiles) and we
*do continue* with the command as we're in the middle of operation.
Also, the metadata profile is applied directly and on the fly on
find_config_tree_* fn call and even if the metadata profile is
found incorrect, we still need to return the non-profiled value
as found in the other configuration provided or default value.
To exit immediately even in this case, we'd need to refactor
existing find_config_tree_* fns so they can return error. Currently,
these fns return only config values (which end up with default
values in the end if the config is not found).
- To check the profile validity before use to be sure it's correct,
one can use :
lvm dumpconfig --commandprofile/--metadataprofile ProfileName --validate
(the --commandprofile/--metadataprofile for dumpconfig will come
as part of the subsequent patch)
- This patch also adds a reference to --commandprofile and
--metadataprofile in the cmd help string (which was missing before
for the --profile for some commands). We do not mention --profile
now as people should use --commandprofile or --metadataprofile
directly. However, the --profile is still supported for backward
compatibility and it's translated as:
--profile == --metadataprofile for lvcreate, vgcreate, lvchange and vgchange
(as these commands are able to attach profile to metadata)
--profile == --commandprofile for all the other commands
(--metadataprofile is not allowed there as it makes no sense)
- This patch also contains some cleanups to make the code handling
the profiles more readable...
Mark profilable settings with a separate CFG_PROFILABLE_METADATA
flag where the profile can be attached to VG/LV. This makes it possible
to differentiate global command-profilable settings (CFG_PROFILABLE flag)
and contextual metadata-profilable (per VG/LV) settings (CFG_PROFILABLE_METADATA flag).
When cmd refresh is called, we need to move any already loaded profiles
to profiles_to_load list which will cause their reload on subsequent
use. In addition to that, we need to take into account any change
in config/profile configuration setting on cmd context refresh
since this setting could be overriden with --config.
Also, when running commands in the shell, we need to remove the
global profile used from the configuration cascade so the profile
is not incorrectly reused next time when the --profile option is
not specified anymore for the next command in the shell.
This bug only affected profile specified by --profile cmd line
arg, not profiles referenced from LVM metadata.
Before, the cft_check_handle used to direct configuration checking
was part of cmd_context. It's better to attach this as part of the
exact config tree against which the check is done. This patch moves
the cft_check_handle out of cmd_context and it attaches it to the
config tree directly as dm_config_tree->custom->config_source->check_handle.
This change makes it easier to track the config tree check results
and provides less space for bugs as the results are directly attached
to the tree and we don't need to be cautious whether the global value
is correct or not (and whether it needs reinitialization) as it was
in the case when the cft_check_handle was part of cmd_context.
Add CONFIG_FILE_SPECIAL config source id to make a difference between
real configuration tree (like lvm.conf and tag configs) and special purpose
configuration tree (like LVM metadata, persistent filter).
This makes it easier to attach correct customized data to the config
tree that is created out of the source then.
Since decisions in the silent mode may not be always obvious,
print skipped prompt with answer 'n'.
Also document '-qq' behaviour (single -q only shuts
logging, while -qq sets silent mode).
Support upto 3 levels os nesting signal blocking.
As of today - code blocks signals immediatelly when it opens
VG in read-write mode - this however makes current prompt usage
then partially unusable since user may not 'break' command
during prompt (something most user would expect).
Until a better fix for prompting is implemented, put in support
for signal nesting - thus when prompt enables signal acceptance,
make it possible to really break command at this point.
Adding log_sys_debug for eventual logging of system errors.
(Using debug level, since currently signal handling functions
do not fail when any error is encoutered).
When quering for dmeventd monitoring status, check first
if lvm2 is configured to monitor to avoid unwanted start
of dmeventd process for answering monitoring status.
Relocate info from thin pool and thin volume segments
to proper code section for segments.
Add discards and thin count status info.
Info is shown with 'lvdisplay --maps' (like for other segments).
For percentage display we need -tpool - so check for layered
device presence here instead of plain pool device.
Also update 'info' - so when pool is 'available' we
display open count for -tpool device instead of mostly
irrelevant pool.
TODO: Maybe we should actually display this open info always?
(even when just -tpool is available, but pool is not)
Emphesize virtual extents for virtual LVs and for
those use 'Virtual extents' instead of 'Logical extents',
so it's immeditatelly visible, which extents do have
straighforward physical backend.
Given a named mirror LV, vgsplit will look for the PVs that compose it
and move them to a new VG. It does this by first looking at the log
and then the legs. If the log is on the same device as one of the mirror
images, a problem occurs. This is because the PV is moved to the new VG
as the log is processed and thus cannot be found in the current VG when
the image is processed. The solution is to check and see if the PV we are
looking for has already been moved to the new VG. If so, it is not an
error.
ignore_suspended_devices=0 is already used in lvm.conf we distribute,
but it was still "1" in the code (so it was used when lvm.conf value
was not defined). It should be "0" too.
Perform two allocation attempts with cling if maximise_cling is set,
first with then without positional fill.
Avoid segfaults from confusion between positional and sorted sequential
allocation when number of stripes varies as reported here:
https://www.redhat.com/archives/linux-lvm/2014-March/msg00001.html
Set A_POSITIONAL_FILL if the array of areas is being filled
positionally (with a slot corresponding to each 'leg') rather
than sequentially (with all suitable areas found, to be sorted
and selected from).
When pvmove0 is finished, it replaces temporarily pvmove0
with error segment, however in this case, pvmove0 remains
unremovable in case pvmove --abort is interrupted in this
moment - since it's not a pvmove anymore and normal
lvremove can't be used to remove LOCKED lv.
In general for non-toplevel LVs we shouldn't allow any _tree_action.
For now error on request for cache_pool activation which
doesn't even exist in dm-table.
When down-converting a RAID1 LV, if the user specifies too few devices,
they will get a confusing message.
Ex:
[root]# lvcreate -m 2 --type raid1 -n raid -L 500M taft
Logical volume "raid" created
[root]# lvconvert -m 0 taft/raid /dev/sdd1
Unable to extract enough images to satisfy request
Failed to extract images from taft/raid
This patch makes the error message a bit clearer by telling the user
the count they are trying to remove and the number of devices they
supplied.
[root@bp-01 lvm2]# lvcreate --type raid1 -m 3 -L 200M -n lv vg
Logical volume "lv" created
[root@bp-01 lvm2]# lvconvert -m -3 vg/lv /dev/sdb1
Unable to remove 3 images: Only 1 device given.
Failed to extract images from vg/lv
[root@bp-01 lvm2]# lvconvert -m -3 vg/lv /dev/sd[bc]1
Unable to remove 3 images: Only 2 devices given.
Failed to extract images from vg/lv
[root@bp-01 lvm2]# lvconvert -m -3 vg/lv /dev/sd[bcd]1
[root@bp-01 lvm2]# lvs -a -o name,attr,devices vg
LV Attr Devices
lv -wi-a----- /dev/sde1(1)
This patch doesn't work in all cases. The user can specify the right
number of devices, but not a sufficient amount of devices from the LV.
This will produce the old error message:
[root@bp-01 lvm2]# lvconvert -m -3 vg/lv /dev/sd[bcf]1
Unable to extract enough images to satisfy request
Failed to extract images from vg/lv
However, I think this error message is sufficient for this case.
Since the usability problem were fixed, we can use this function.
Cleanup orphan LVs with TEMPORARY flags
(reduces couple blkid error reports, but couple of them
is still left...)
Since cache segment is purely virtual mapping, it has nothing for
discard. Discardable is cache origin here which is now
properly removed on 'delete' phase.
Plain lv_empty() call needs to only detach cache origin and leave
origin unchanged.
Drop unused passed cmd pointer from function.
TODO:
We have two similar functions (though not identical)
lv_manip.c: for_each_sub_lv()
metadata.c: _lv_each_dependency()
They seem to not always match - we should probably convert
to use only a single function.
Use proper vgmem memory pool for allocation of LV name in the vg
and check if new renamed LV is a valid name.
TODO: validation should really use also VG name, othewise we are not
able to tell "vgname-lvname" will be valid.
When lvm2 command works with clvmd and uses locking in wrong way,
it may 'leak' certain file descriptors in opened (incorrect) state.
dev_cache_exit then destroys memory pool of cached devices, while
_open_devices list in dev-io.c was still referencing them if they
were still opened.
Patch properly calls _close() function to 'self-heal' from this
invalid state, but it will report internal error (so execution
with abort_on_internal_error causes immediate death). On the
normal 'execution', error is only reported, but memory state is
corrected, and linked list is not referencing devices from
released mempool.
For crash see: https://bugzilla.redhat.com/show_bug.cgi?id=1073886
Before:
thin_disabled_features = ""
Now:
thin_disabled_features = []
Which is a more correct and consistent way of specifying void array
though parses can handle both forms.
Smallest supported size for swap device is 40KB, however current
test skipped devices smaller then 4096 sectors (2MB).
Since page is in bytes, convert it to sectors before comparing
with device size (in sectors).
When daemon releases memory and it is still in critical
section, issue an error message and drop memory.
We cannot do anything better for now and we at least
release allocated resource.
FIXME:
This code is triggered when i.e. clvmd is killed while
some LVs are suspend - in this case suspended devices leak,
so if this happens during i.e. clvmd upgrade we have
unresolved problem - even locked rootfs...
This function is typically called for cmd context refresh or destroy.
On the non-clustered case we already unlocked all messages,
however when i.e. 'clvmd' gets break signal it may have
still couple messages queued.
For now just report an error.
Recent debug tracing commit introduce read of uninitialized memory,
since VGID is not really a proper string which ends with '\0'.
Enforce at most 32 (ID_LEN) chars are read from vgid.
(in release fix)
Since commit f12ee43f2e call destroy,
it start to check all VGs are unlocked. However when we become_daemon,
we simply reset locking (since lock is still kept by parent process).
So implement a simple 'reset' flag.
Instead of sending repeatedly LOCAL_SYNC commands to clvmds
like 'lvs', rememeber the last sent commmand, and if there was no other
clvmd command, drop this redundant SYNC call message.
The problem has started with commit:
56cab8cc03
This introduced correct synchronisation of name, when user requests to know
open_count (needs to wait for udev), however it is also executed for
read-only cases like 'lvs' command.
For now implement very simple solution, which is only monitoring
outgoing clvmd command, and when sequence of LOCAL sync names are
recognized, they are skipped automatically.
TODO:
Future solution might move this variable info 'cmd_context' and
use 'needs_sync' flag also i.e. in file locking code.
When the backup is disabled, avoid testing backup presence.
This only leads to errors being logged in debug trace and the missing
backup can't be fixed, since it's disabled.
Decorate NULL returns with debug_cache output so the
debug log doesn't contain spurios <bactrace> line without
any reason for it.
Add internal errors when cache is misused.
The global/suffix was missing from example lvm.conf but it can
be very useful when using lvm in scripts and now in profiles as well
Let's expose it more.
Create a separate function to validation snapshot min chunk value
and relocate code into snapshot_manip file.
This function will be shared with lvconvert then.
Users can create several profiles for how the tools report
the output very easily and then just use
<lvm reporting command> --profile <report_profile_name>
This prevents numerous VG refreshes on each "pvscan --cache -aay" call
if the VG is found complete. We need to issue the refresh only if the PV:
- is new
- was gone before and now it reappears (device "unplug/plug back" scenario)
- the metadata has changed
Reorder detection for internal device - since this test
is much simpler then target analysis, check it sooner.
Replace test for '68' with sizeof & ID_LEN
Add FIXME about device alias problem with is_reserved_lvname,
since this test fails on devices like /dev/dm-X
so we need to convert tests to UUID.
Let's do this the other way round - this makes more logic than commit b995f06.
So let's allow empty values for global/thin_disabled_features where
such an empty value now means "none of this features are disabled".
The global/thin_disabled_features should be marked as having no default
value. Otherwise the output from 'lvm dumpconfig --type default' would
have 'thin_disabled_features=""' which will produce an error message
'Ignoring empty string in config file ...' if such output is feed
back to lvm.
Even though we make pool volume as a public visible LV,
we still do not want tools to look at this volume.
While we do not create /dev/vg/lv link, device is still
accessible via /dev/mapper/vg-lv and there is no easy
way to recognize it's private without lvm2 metadata.
Enhance UUID with -pool suffix and directly skip
any LV with a suffix in device_is_usable() call.
TODO: enhance other targets with this logic.
blkid may probably use same simple logic.
When we create thin-pool we have used trick to keep
volume active, but since we now support TEMPORARY flag,
we could just localy active & deactive metadata LV,
and let the thinpool through normal activation process.
The empty pool is also the pool which has yet queued list of messages
and transaction_id == 1.
Problem is exposed when pool is created inactive.
lvcreate -L10 -T vg/pool -an
lvcreate -V10 -T vg/pool
When pool_has_message() is queried with NULL lv and 0 device_id
it should just return 'true' when there is any message queued.
So it needs to return negative value dm_list_empty().
Since there is no user for this code path in code currently,
this bug has not been triggered.
We can't use mempool for temporary variable for configuration path inside
find_config_tree_* functions since these functions can use the mempool
themselves deeper in the code and we can free mempool chunks only from
top to bottom which is not the case here (some default string
configuration values can be allocated from the mempool).
The same as for allocation/thin_pool_chunk_size - the default value
used is just a starting point. The calculation continues using the
properties of the devices actually used.
The allocation/thin_pool_chunk_size is a bit more complex. It's default
value is evaluated in runtime based on selected thin_pool_chunk_size_policy.
But the value is just a starting point. The calculation then continues
with dependency on the properties of the devices used. Which means for
such a default value, we know only the starting value.
If the config setting is defined as having no default value, but it's
still not NULL, it means such a value acts as a *hint* only
(e.g. a starting value from which the default value is calculated).
The new "cfg_def_get_default_value_hint" will always return the value
as defined in config_settings.h.
The original "cfg_def_get_default_value" will always return 0/NULL if
the config setting is defined with CFG_DEFAULT_UNDEFINED flag (hence
ignoring the hint).
This is needed for proper distiction between a correct default value
and the value which is just a hint or a starting point in calculation,
but it's not the final value (yes, we do have such settings!).
The devices/cache and devices/cache_dir are evaluated in runtime this way:
- if devices/cache is set, use it
- if devices_cache/dir or devices/cache_file_prefix is set, make up a
path out of that for devices/cache in runtime, taking into account
the LVM_SYSTEM_DIR environment variable if set
- otherwise make up the path out of default which is:
<LVM_SYSTEM_DIR>/<cache_dir>/<cache_file_prefix>.cache
With the runtime defaults, we can encode this easily now. Also, the lvm
dumpconfig can show proper and exact information about this setting then
(the variant that shows default values).
Previously, we declared a default value as undefined ("NULL") for
settings which require runtime context to be set first (e.g. settings
for paths that rely on SYSTEM_DIR environment variable or they depend
on any other setting in some way).
If we want to output default values as they are really used in runtime,
we should make it possible to define a default value as function which
is evaluated, not just providing a firm constant value as it was before.
This patch defines simple prototypes for such functions. Also, there's
new helper macros "cfg_runtime" and "cfg_array_runtime" - they provide
exactly the same functionality as the original "cfg" and "cfg_array"
macros when defining the configuration settings in config_settings.h,
but they don't set the constant default value. Instead, they automatically
link the configuration setting definition with one of these functions:
typedef int (*t_fn_CFG_TYPE_BOOL) (struct cmd_context *cmd, struct profile *profile);
typedef int (*t_fn_CFG_TYPE_INT) (struct cmd_context *cmd, struct profile *profile);
typedef float (*t_fn_CFG_TYPE_FLOAT) (struct cmd_context *cmd, struct profile *profile);
typedef const char* (*t_fn_CFG_TYPE_STRING) (struct cmd_context *cmd, struct profile *profile);
typedef const char* (*t_fn_CFG_TYPE_ARRAY) (struct cmd_context *cmd, struct profile *profile);
(The new macros actually set the CFG_DEFAULT_RUNTIME flag properly and
set the default value link to the function accordingly).
Then such configuration setting requires a function of selected type to
be defined. This function has a predefined name:
get_default_<id>
...where the <id> is the id of the setting as defined in
config_settings.h. For example "backup_archive_dir_CFG" if defined
as a setting with default value evaluated in runtime with "cfg_runtime"
will automatically have "get_default_backup_archive_dir_CFG" function
linked to this setting to get the default value.
Using mempool is much safer than using the global static variable.
The global variable would be rewritten on each find_config_tree_* call
and we need to be very careful not to get into this problem (we don't
do now, but we can with the patches for "runtime defaults" that will follow).
These settings don't have any default value predefined:
log/file
log/activate_file
global/library_dir
This settings has default value but not yet declared in config_settings.h:
global/locking_library (default is DEFAULT_LOCKING_LIB)
This is probably not optimal, but makes the lvmetad case mimic non-lvmetad code
more closely. It also fixes vgremove of a partially corrupt VG with lvmetad, as
_vg_write_raw (and consequently, entire vg_write) currently panics when it
encounters a corrupt MDA. Ideally, we'd be able to explicitly control when it is
safe to ignore them.
Move flags for segments to segtype header where it seems more closely
related as the features are related to segtype and not activation.
Use unsigned #define - since it's more common in lvm2 source code
for bit flags.
Condition was swapped - however since it's been based on 'random'
memory content it's been missed as attribute has not been set.
So now we have quite a few possible results when testing.
We have old status without separate metadata and
we have kernels with fixed snapshot leak bug.
(in-release update)
Code uses target driver version for better estimation of
max size of COW device for snapshot.
The bug can be tested with this script:
VG=vg1
lvremove -f $VG/origin
set -e
lvcreate -L 2143289344b -n origin $VG
lvcreate -n snap -c 8k -L 2304M -s $VG/origin
dd if=/dev/zero of=/dev/$VG/snap bs=1M count=2044 oflag=direct
The bug happens when these two conditions are met
* origin size is divisible by (chunk_size/16) - so that the last
metadata area is filled completely
* the miscalculated snapshot metadata size is divisible by extent size -
so that there is no padding to extent boundary which would otherwise
save us
Signed-off-by:Mikulas Patocka <mpatocka@redhat.com>
While stripe size is twice the physical extent size,
the original code will not reduce stripe size to maximum
(physical extent size).
Signed-off-by: Zhiqing Zhang <zhangzq.fnst@cn.fujitsu.com>
To make "lvm dumpconfig --type default" output to be usable like any
other config, we need to comment out lines that have no default value
defined. Otherwise, we'd have the output with config options
with blank or zero values which is not the same as when the value
is not defined! And such configuration can't be feed into lvm again
without further edits. So let's fix this.
Currently this covers these configuration options exactly:
devices/loopfiles
devices/preferred_names
devices/filter
devices/global_filter
devices/types
allocation/cling_tag_list
global/format_libraries
global/segment_libraries
activation/volume_list
activation/auto_activation_volume_list
activation/read_only_volume_list
activation/mlock_filter
metadata/dirs
metadata/disk_areas
metadata/disk_areas/<disk_area>
metadata/disk_areas/<disk_area>/start_sector
metadata/disk_areas/<disk_area>/size
metadata/disk_areas/<disk_area>/id
tags/<tag>
tags/<tag>/host_list
Start to convert percentage size handling in lvresize to the new
standard. Note in the man pages that this code is incomplete.
Fix a regression in non-percentage allocation in my last check in.
This is what I am aiming for:
-l<extents>
-l<percent> LV/ORIGIN
sets or changes the LV size based on the specified quantity
of logical logical extents (that might be backed by
a higher number of physical extents)
-l<percent> PVS/VG/FREE
sets or changes the LV size so as to allocate or free the
desired quantity of physical extents (that might amount to a
lower number of logical extents for the LV concerned)
-l+50%FREE - Use up half the remaining free space in the VG when
carrying out this operation.
-l50%VG - After this operation, this LV should be using up half the
space in the VG.
-l200%LV - Double the logical size of this LV.
-l+100%LV - Double the logical size of this LV.
-l-50%LV - Reduce the logical size of this LV by half.
Reorder detection of cmirrord. Now if cmirrord is not
running, target will not try to load kernel log module,
for communication with cmirrord.
Whole check for attrs now also happens just once.
Test raid10 availability as a target feature (instead of doing
it in all the places where raid10 should be checked).
TODO: activation needs runtime validation - so metadata with raid10
are skipped from activation in user-friendly way in lvm2.
Parsing vg structure during supend/commit/resume may require a lot of
memory - so move this into vg_write.
FIXME: there are now multiple cache layers which our doing some thing
multiple times at different levels. Moreover there is now different
caching path with and without lvmetad - this should be unified
and both path should use same mechanism.
Several fixes for the recent changes that treat allocation percentages
as upper limits.
Improve messages to make it easier to see what is happening.
Fix some cases that failed with errors when they didn't need to.
Fix crashes when first_seg() returns NULL.
Remove a couple of log_errors that were actually debugging messages.
Remove 'skip' argument passed into the function.
We always used '0' - as this is the only supported
option (-K) and there is no complementary option.
Also add some testing for behaviour of skipping.
Avoid introducing libdm structure allocated in library user.
Use direct call with all currently supported args.
When new arg is added, new function will cover it.
When an origin exists and the 'lvcreate' command is used to create
a cache pool + cache LV, the table is loaded into the kernel but
never instantiated (suspend/resume was never called). A user running
LVM commands would never know that the kernel did not have the
proper state unless they also ran the dmsetup 'table/status' command.
The solution is to suspend/resume the cache LV to make the loaded
tables become active.
Introduce a new parameter called "approx_alloc" that is set when the
desired size of a new LV is specified in percentage terms. If set,
the allocation code tries to get as much space as it can but does not
fail if can at least get some.
One of the practical implications is that users can now specify 100%FREE
when creating RAID LVs, like this:
~> lvcreate --type raid5 -i 2 -l 100%FREE -n lv vg
Update the man page so the user knows that dm-cache 1.3.0 module
is needed. Also, enforce that in the code and print a warning if
the module is not new enough.
Users now have the ability to convert their existing logical volumes
into cached logical volumes. A cache pool LV must be specified using
the '--cachepool' argument. The cachepool is the small, fast LV used
to cache the large, slow LV that is being converted.
lv_active_change will enforce proper activation.
Modification of activation was wrong and lead to misuse of
autoactivation. Fix allows to use proper local exclusive activation,
while the removed code turned this into just exclusive
activation (losing required local property).
