1
0
mirror of git://sourceware.org/git/lvm2.git synced 2024-12-22 17:35:59 +03:00
Commit Graph

1735 Commits

Author SHA1 Message Date
Zdenek Kabelac
d13239b054 lvcreate: new validation code
Refactor lvcreate code.

Prefer to use arg_outside_list_is_set() so we get automatic 'white-list'
validation of supported options with different segment types.

Drop used lp->cache, lp->cache and use seg_is_cache(), seg_is_thin()

Draw clear border where is the last moment we could change create
segment type.

When segment type is given with --type - do not allow it to be changed
later.

Put together tests related to individual segment types.

Finish cache conversion at proper part of lv_manip code after
the vg_metadata are written - so we could correcly clean-up created
stripe LV for cache volume.
2014-10-24 16:39:32 +02:00
Zdenek Kabelac
51a29e6056 pools: error path removes metadata
When pool volume is create - it has already managed to update metadata
once within lv_extend - so revert new created LV here.
2014-10-24 16:39:32 +02:00
Zdenek Kabelac
7359a9df88 pool: better error path handling
Move test for size of new LV names in front before
any creation of LV.

Properly check striped  segtype kernel presence,
since passed 'segtype' is already tested.

Keep deactivation error path local to wiping part of the function.

Create metadata with temporary flag (it's activated, zeroed
and deactivated).
2014-10-24 16:39:32 +02:00
Zdenek Kabelac
21798418fc cleanup: better stack tracing
Show proper backtrace on error path.
2014-10-24 16:39:32 +02:00
Zdenek Kabelac
a330640063 options: introduce pooldatasize option
Introduce new option to specify pool data size.
This will be user to create i.e.  cache & cachepool at once.
And possible for thin external origin snapshot.

This is only very basic patch to enable options, the
real working code will come later.
2014-10-24 16:39:32 +02:00
Zdenek Kabelac
9a6758e953 cleanup: use matching flags for permissions
Since our status bits are 64b - use uint64_t for permissions.
2014-10-24 16:39:31 +02:00
Zdenek Kabelac
37bd12e7ba cleanup: lv_manip drops duplicated internal error
No reason to check the same condition twice with internal error.
2014-10-24 16:39:31 +02:00
Zdenek Kabelac
f2ea890423 cleanup: don't backup twice 2014-10-24 16:39:31 +02:00
Zdenek Kabelac
a4788b4994 cleanup: move code for checking vg features
Move code that checks for needed VG features into separate
smaller function.
2014-10-24 16:39:31 +02:00
Zdenek Kabelac
b726003b85 cleanup: simplier lv name construction
Using NAME_LEN max lv name size.
2014-10-24 16:39:31 +02:00
Zdenek Kabelac
cf674142a2 cleanup: move code 2014-10-24 16:39:31 +02:00
Zdenek Kabelac
4f8ed25a99 cleanup: indent
Various indents and tiny error message improvements.
2014-10-24 16:39:31 +02:00
Zdenek Kabelac
f1cb267274 lv_manip: preserve read-only status in layered volume 2014-10-24 16:39:31 +02:00
Zdenek Kabelac
be3f666ef3 lv_manip: improve should_wipe reporting
We want to print smarter warning message only when
the zeroing was not provided on the first zeroable segment
of newly created LV.

Put warning within _should_wipe_lv function to avoid reevaluation
of same conditions twice.
2014-10-24 16:39:31 +02:00
Zdenek Kabelac
8a2f553b7d lvcreate: move tests that requires activation
Tests that needs active kernel driver put in single place.
2014-10-24 16:39:31 +02:00
Zdenek Kabelac
f7cfea251c lvcreate: better logging for temporary device
Hide creation of temporary LVs and print them only in verbose mode.

e.g. hides confusing message about creation of _pmspare
device during creation of pool.
2014-10-24 16:39:31 +02:00
Zdenek Kabelac
2c057f33f3 segtypes: macro segtype_is_unknown 2014-10-24 16:39:31 +02:00
Zdenek Kabelac
a98ea95c4d pool: better error message 2014-10-24 16:39:31 +02:00
Zdenek Kabelac
a2244c3776 pool: fix testmode support with pools
Allow the --test mode to proceed further.
2014-10-24 16:39:31 +02:00
Zdenek Kabelac
1c7aae40a1 raid: query lock holder
Ask for lock the proper LV.
Use the top-most LV to query for locally exclusive lock.

The rest of operations are then using 'lv_info()'

TODO:
  Check all devices are reloaded from proper level.
  In general any query on lv_is_active is supposed to be running
  ona lv_lock_holder() volume.
2014-10-24 16:39:31 +02:00
Zdenek Kabelac
e901a87a69 cache: better error message 2014-10-24 16:39:31 +02:00
Zdenek Kabelac
6e57dbfcaa cache: validate for locked
Add extra safety.
2014-10-24 16:39:31 +02:00
Zdenek Kabelac
9411c19b31 segments: introduce lvseg_name
Instead of segtype->ops->name()  introduce lvseg_name().

This also allows us to leave name() function 'empty' for default
return of segtype->name.

TODO: add functions for rest of ops->
2014-10-24 16:39:30 +02:00
Alasdair G Kergon
5e6e2d6b1b vgcreate: Permit non-power-of-2 extent sizes.
Relax validation to permit extent sizes > 128KB that are not powers of 2
with lvm2 format.  Existing code was already capable of handling this.
2014-10-14 18:12:15 +01:00
Alasdair G Kergon
f3bb1c018f vgremove: Use process_each_lv_in_vg. 2014-10-07 16:45:45 +01:00
Petr Rockai
88959032f7 metadata: Fix find_pv_in_vg for missing PVs/filtered devices. 2014-10-07 16:11:56 +02:00
Zdenek Kabelac
0cbb381e15 lvcreate: regression fix on lv name limits
When we are given an existing LV name - it needs to be allowed
to pass in even restricted name as the LV could have existed
long before we introduced some new restriction on prefix/suffix.i

Fix the regression on name limits and drop restriction to be applied
on any existing LVs - only the new created LV names have to be
complient with current name restrictions.

FIXME: we are currently using restricted names incorrectly in few
other places - device_is_usable() skips restricted names,
and udev flags are also incorrectly set for restricted names
so these LVs are not getting links properly.
2014-10-07 15:52:31 +02:00
Zdenek Kabelac
27ff61d012 cleanup: rename _name, _lv and _size
Use some standard names for lv char * names, logical_volume * lv
and sizes internally.
2014-10-07 15:51:53 +02:00
Zdenek Kabelac
9810f8aac7 cleanup: dont hide pv_dev declaration from pv
Just skip using local vars here...
2014-10-07 10:19:32 +02:00
Peter Rajnoha
888da17495 metadata: add internal error if PV has no existing device attached during find_pv_in_vg
find_pv_in_vg fn iterates over the list of PVs covered by the VG and
each PV's pvl->pv->dev is compared with device acquired from device
cache. However, in case pvl->pv->dev is NULL as well as device cache
returns NULL (e.g. when device is filtered), we'll get incorrect match
and the code calling find_pv_in_vg uses incorrect PV (as it thinks
it's the exact PV with the pv_name). The INTERNAL_ERROR covers this
situation and errors out immediately.
2014-10-07 09:15:12 +02:00
David Teigland
8dc5f42254 metadata: Use flags to control warnings.
The warnings arg was used to enable logging of warnings
when reading a PV.  This arg is turned into a set of flags
with the WARN_PV_READ flag matching the existing behavior.

A new flag WARN_INCONSISTENT is added that will cause
vg_read_internal() to log the "VG is not consistent"
warning so the various callers do not need to log
this warning themselves.

A new vg_read flag READ_WARN_INCONSISTENT is used from
reporting to enable the WARN_INCONSISTENT flag in
vg_read_internal.

[Committed by agk with cosmetic changes and tweaks.]
2014-10-07 01:15:43 +01:00
David Teigland
f1a000a477 toollib: Rewrite process_each_pv.
Process PVs by iterating through VGs, then iterating through
devices if the command needs to process non-PV devices.
The process_single function can always use the VG and PV args.

[Committed by agk with cosmetic changes and tweaks.]
2014-10-07 01:15:43 +01:00
Zdenek Kabelac
d9d50e4533 cleanup: typo update 2014-10-06 15:23:08 +02:00
Zdenek Kabelac
916a68585e cleanup: error is already logged
Function get_only_segment_using_this_lv() already prints error,
no need to show more internal logic to user as an error.
2014-10-06 15:23:08 +02:00
Zdenek Kabelac
8d272ba0ad validation: use validate_pool_chunk_size
We could validation pool chunk size with a single function.
2014-10-06 15:23:07 +02:00
Zdenek Kabelac
6c44299006 validation: share more code for pool validation
Reuse thin validation code for cache pool validation.
2014-10-06 15:23:07 +02:00
Zdenek Kabelac
59ced3c281 pool: use validation 2014-10-06 15:23:07 +02:00
Zdenek Kabelac
a2aa609810 pool: validate_pool_chunk_size
Introduce pool function for validation of chunk size.
It's good idea to be able to reject invalid chunk size
when entered on command line before we open VG.
2014-10-06 15:23:01 +02:00
Zdenek Kabelac
f76f2ce1df cache: use same alg for cache size calc
Use the same algorithm for cache metadata size as the cache tool is using.
2014-10-06 15:18:06 +02:00
Zdenek Kabelac
d46c2f1c94 cache: improve creation code
Move code to better locations.
Improve test and remove invalid ones
(i.e. no reason to require cache size to be >= then origin).

Correctly comment where the code is doing actual conversion
of other existing volume - we do already a similar thing with
external origins.

Lots of new command line options and combinations is now supported.
Hopefully older syntax still works as well.

lvcreate --cache --cachepool vg/pool  -l1
lvcreate --type cache --cachepool vg/pool  -l1
lvcreate --type cache-pool vg/pool  -l1
lvcreate --type cache-pool --name pool vg  -l1
... and many many more ...
2014-10-06 15:18:06 +02:00
Zdenek Kabelac
189d0f8e1d lvremove: detect cluster wide active state
If the LV is active remotely do not skip question for deactivation.
2014-10-06 15:18:06 +02:00
Zdenek Kabelac
b37203c819 cache: check activation of volume activated
volume_list may silently skip activation which is then still reported as
success.
2014-10-06 15:18:06 +02:00
Zdenek Kabelac
75119d85b3 cache: lvremoved cached LV removes cache pool
When we remove cached volume, whole tree must go down.
There is  'lvconvert --splitcache' to preserve cache pool.
2014-10-06 15:18:06 +02:00
Zdenek Kabelac
cb273fe164 pools: move removal of _pmspare
Since _pmspare is internal volume move it to
lv_remove_single -  so it's automatically removed with
last remove thin-pool.

lv_remove_with_dependencies() is not always used for pool removal.
2014-10-06 15:18:06 +02:00
Zdenek Kabelac
0662391ff6 lv_manip: fix out of order backup
We had only 2 remaining places that were leaving unbackuped metadata.
2014-10-06 15:18:05 +02:00
Zdenek Kabelac
5a36691843 cache: add validate_lv_cache_create
Move validation tests into separate function.
2014-10-06 15:18:05 +02:00
David Teigland
17ab39f743 cache: include cache mode in vg metadata and display
The cache mode of a new cache pool is always explicitly
included in the vg metadata.  If a cache mode is not
specified on the command line, the cache mode is taken
from lvm.conf allocation/cache_pool_cachemode, which
defaults to "writethrough".

The cache mode can be displayed with lvs -o+cachemode.
2014-10-02 11:17:41 -05:00
Peter Rajnoha
5011cac9cf filters: add cmd->full_filter - composite of cmd->filter and cmd->lvmetad_filter
There are actually three filter chains if lvmetad is used:
  - cmd->lvmetad_filter used when when scanning devices for lvmetad
  - cmd->filter used when processing lvmetad responses
  - cmd->full_fiilter (which is just cmd->lvmetad_filter + cmd->filter chained together) used
    for remaining situations

This patch adds the third one - "cmd->full_filter" - currently this is
used if device processing does not fall into any of the groups before,
for example, devices which does not have the PV label yet and we're just
creating a new one or we're processing the devices where the list of the
devices (PVs) is not returned by lvmetad initially.

Currently, the cmd->full_filter is used exactly in these functions:
  - lvmcache_label_scan
  - _pvcreate_check
  - pvcreate_vol
  - lvmdiskscan
  - pvscan
  - _process_each_label

If lvmetad is used, then simply cmd->full_filter == cmd->filter because
cmd->lvmetad_filter is NULL in this case.
2014-10-02 13:06:46 +02:00
Heinz Mauelshagen
45f57477f4 cleanup: Use segtype.h definitions of segment type names wherever possible
We are not using already defined segement type names where we could.

There is a lot of other places in device-mapper and LVM2 we have those
hardcoded so we should better finally have a common interface in
libdevmapper to avoid this.
2014-09-24 15:24:41 +02:00
Zdenek Kabelac
30777fa46f cleanup: fix typo and use vg mempool
Since we are updating VG -  we can use its own mempool.
2014-09-24 10:54:47 +02:00