IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Fixes commit b8f4ec846 "display: ignore --reportformat"
by restoring the --reportformat option to pvdisplay.
Adding -C to pvdisplay turns the command into a reporting
command (like pvs, vgs, lvs) in which --reportformat can
be useful.
When processing historical LVs inside process_each_lv_in_vg for
selection, we need to use dummy "_historical_lv" for select_match_lv.
This is because a historical LV is not an actual LV, but only a tiny
representation with subset of original properties that we recorded
(name, uuid...).
To use the same processing functions we use for full-fledged non-historical
LVs, we need to use the prefilled "_historical_lv" structure which has all
the other missing properties hard-coded.
Allow to use --vdosettings with lvcreate,lvconvert,lvchange.
Support settings currenly only configurable via lvm.conf.
With lvchange we require inactivate LV for changes to be applied.
Settings block_map_era_length has supported alias block_map_period.
When a VG has PVs with different device id types,
it would try to use the idtype of the previous PV
in the loop. This would produce an unncessary warning,
or could lead to using the devname idtype when a better
idtype is available.
In most installations, /dev/sda* or /dev/vda* should be included
in system.devices because the root, home, etc LVs are usually on
sda or vda.
Add a special case warning when a pvscan autoactivation command
sees that /dev/sda* or /dev/vda* are excluded by system.devices,
either not listed or having a different device id.
Change messages that refer to devices being "excluded by filters"
to say just "excluded". This will avoid mistaking the word
"filters" with the lvm.conf filter setting.
It's more logical to warn about --nolocking in the man page
before it's used rather than after it's used and too late.
Also, warnings are usually for things the user may not know.
Use dev_cache_get_existing() in a few common, high level
locations where it's obvious that only existing dev-cache
entries are wanted. This can be expanded and used in more
locations (or dev_cache_get can stop creating new entries.)
When compiled and used with:
CFLAGS="-fsanitize=address -g -O0"
ASAN_OPTIONS=strict_string_checks=1:detect_stack_use_after_return=1:check_initialization_order=1:strict_init_order=1
we have few reported issue - they where not normally spotted, since
we were still accessing our own memory - but ouf of buffer-range.
TODO: there is still something to enhance with handling of #orphan vgids
. error exit means that lvmdevices --update would make a change.
. remove check of PART field from --check because it isn't used.
. unlink searched_devnames file to ensure check|update will search
The destination vg is first written with the EXPORTED flag,
then the source vg is written, then the destination vg is
written again without the EXPORTED flag. Remove an unnecessary
vg_read of the destination vg just before the second write.
Since we check for present DM devices - cache result for
futher use of checking presence of such device.
lvm2 uses cache result for label scan, but also when
it tries to activate or deactivate LV - however only simple
target 'striped' is reasonably supported.
Use disable_dm_devs to be able to control when lv_info()
get cache or uncached results.
TODO: support more type, however this is getting very complicated.
We used to reset 'settings' to their defaults after command is finished.
This however has a drawback we lose all the logging after this point.
So this patch disables this 'reset' to observe for side-effects.
lvm shell should be getting reset when next command is run -
so this might or might not have some 'hidden' effects.
ATM it looks like nothing really bad should happen - we just should be
able to get more logs - at least from normal commands.
Fixes commit "pvscan: match device arg to filter symlink"
which failed to account for the fact that filter entries
are not just path names but include "a" or "r", etc.
The device_hint name in the metadata was meant to prevent
autoactivation from md components, but the name checks were
more general and would catch unnecessary cases.
This fixes an issue related to the optimization in
"pvscan: only add device args to dev cache"
If the devices file is not used, and the lvm.conf filter
accepts devices via symlink names, then those devices won't
be accepted by pvscan for autoactivation. To resolve this,
recognize when the filter contains symlinks and disable the
optimization. When the optimization is disabled, a full
dev_cache_scan is performed, and symlinks are associated
with the device names passed to pvscan. filter-regex
will accept a device if symlinks to that device are accepted.
If the optimized label scan fails (using online files),
then clear the device state prior to falling back to the
standard label_scan. This avoids printing output about
unexpected state.
Consistently create the pvs_lookup file for VGs with
more than one PV. Previously the file create would be
skipped if all the PVs happened to already be online.
That led to unpredicatable results in an uncommon case
(when the last PV to come online is the only PV with
metadata.)
Copy another optimization from pvscan -aay to vgchange -aay.
When using the optimized label scan for only one VG, acquire the
VG lock prior to the scan. This allows vg_read to then skip the
repeated label scan that normally happens after locking the vg.
Include the device name in the /run/lvm/pvs_online/pvid files.
Commands using the pvid file can use the devname to more quickly
find the correct device, vs finding the device using the
major:minor number. If the devname in the pvid file is missing
or incorrect, fall back to using the devno.
For completeness and consistency, adjust the behavior
for some variations of:
vgchange -aay --autoactivation event [vgname]
The current standard use is with a VG name arg, and the
command is only called when all pvs_online files exist.
This is the optimal case, in which only pvs_online devs
are read. This remains the same.
Clean up behaviors for some other unexpected uses of the
command:
. With no VG name arg, the command activates any VGs
that are complete according to pvs_online. If no
pvs_online files exist, it does nothing.
. If a VG name is used but no PVs online files exist for
the VG, or the PVs online files are incomplete, then
consider there could be a problem with the pvs_online
files, and fall back to a full label scan prior to
attempting the activation.
Port another optimization from pvscan -aay to vgchange -aay:
"pvscan: only add device args to dev cache"
This optimization avoids doing a full dev_cache_scan, and
instead populates dev-cache with only the devices in the
VG being activated.
This involves shifting the use of pvs_online files from
the hints interface up to the higher level label_scan
interface. This specialized label_scan is structured
around creating a list of devices from the pvs_online
files. Previously, a list of all devices was created
first, and then reduced based on the pvs_online files.
The initial step of listing all devices was slow when
thousands of devices are present on the system.
This optimization extends the previous optimization that
used pvs_online files to limit the devices that were
actually scanned (i.e. reading to identify the device):
"vgchange -aay: optimize device scan using pvs_online files"
Port the old pvscan -aay scanning optimization to vgchange -aay.
The optimization uses pvs_online files created by pvscan --cache
to derive a list of devices to use when activating a VG. This
allows autoactivation of a VG to avoid scanning all devices, and
only scan the devices used by the VG itself. The optimization is
applied internally using the device hints interface.
The new option "--autoactivation event" is given to pvscan and
vgchange commands that are called by event activation. This
informs the command that it is being used for event activation,
so that it can apply checks and optimizations that are specific
to event activation. Those include:
- skipping the command if lvm.conf event_activation=0
- checking that a VG is complete before activating it
- using pvs_online files to limit device scanning
