IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Before, we used to display "Can't remove open logical volume" which was
generic. There 3 possibilities of how a device could be opened:
- used by another device
- having a filesystem on that device which is mounted
- opened directly by an application
With the help of sysfs info, we can distinguish the first two situations.
The third one will be subject to "remove retry" logic - if it's opened
quickly (e.g. a parallel scan from within a udev rule run), this will
finish quickly and we can remove it once it has finished. If it's a
legitimate application that keeps the device opened, we'll do our best
to remove the device, but we will fail finally after a few retries.
Add dm_device_has_mounted_fs fn to check mounted filesystem on a device.
This requires sysfs directory to be correctly set via dm_set_sysfs_dir
(/sys by default). If sysfs dir is not used or it's set incorrectly,
dm_device_has_{holders,mounted_fs} will return 0!
Transfer of build_dm_uuid() function into libdm made uuid_prefix as parameter,
thus sizeof() was replaced with strlen() and room for '\0' missed.
As it's only fix in current version - no whatsnew.
This is a workaround for long-lasting problem with using the WATCH udev
rule. When trying to remove a DM device, this one can still be opened
while processing the event in parallel (generated based on the WATCH
udev rule).
Let's use this until we have a proper solution.
Makes dumpconfig whole-section output wrong in a different way from before,
but we should be able to merge cft_cmdline properly into cmd->cft now and
remove cascade.
functionality. A number of bugs (copied and pasted all over the code) should
disappear:
- most string lookup based on dm_config_find_node would segfault when
encountering a non-zero integer (the intention there was to print an
error message instead)
- check for required sections in metadata would have been satisfied by
values as well (i.e. not sections)
- encountering a section in place of expected flag value would have
segfaulted (due to assumed but unchecked cn->v != NULL)
leaving behind the LVM-specific parts of the code (convenience wrappers that
handle `struct device` and `struct cmd_context`, basically). A number of
functions have been renamed (in addition to getting a dm_ prefix) -- namely,
all of the config interface now has a dm_config_ prefix.
This patch adds the ability to upconvert a raid1 array - say from 2-way to
3-way. It does not yet support upconverting linear to n-way.
The 'raid' device-mapper target allows for individual components (images) of
an array to be specified for rebuild. This mechanism is used when adding
new images to the array so that the new images can be resync'ed while the
rest of the images in the array can remain 'in-sync'. (There is no
mirror-on-mirror layering required.)
~> lvconvert --splitmirrors 1 --trackchanges vg/lv
The '--trackchanges' option allows a user the ability to use an image of
a RAID1 array for the purposes of temporary read-only access. The image
can be merged back into the array at a later time and only the blocks that
have changed in the array since the split will be resync'ed. This
operation can be thought of as a partial split. The image is never completely
extracted from the array, in that the array reserves the position the device
occupied and tracks the differences between the array and the split image via
a bitmap. The image itself is rendered read-only and the name (<LV>_rimage_*)
cannot be changed. The user can complete the split (permanently splitting the
image from the array) by re-issuing the 'lvconvert' command without the
'--trackchanges' argument and specifying the '--name' argument.
~> lvconvert --splitmirrors 1 --name my_split vg/lv
Merging the tracked image back into the array is done with the '--merge'
option (included in a follow-on patch).
~> lvconvert --merge vg/lv_rimage_<n>
The internal mechanics of this are relatively simple. The 'raid' device-
mapper target allows for the specification of an empty slot in an array
via '- -'. This is what will be used if a partial activation of an array
is ever required. (It would also be possible to use 'error' targets in
place of the '- -'.) If a RAID image is found to be both read-only and
visible, then it is considered separate from the array and '- -' is used
to hold it's position in the array. So, all that needs to be done to
temporarily split an image from the array /and/ cause the kernel target's
bitmap to track (aka "mark") changes made is to make the specified image
visible and read-only. To merge the device back into the array, the image
needs to be returned to the read/write state of the top-level LV and made
invisible.
Adding debuging functionality to lock and unlock memory pool.
2 ways to debug code:
crc - is default checksum/hash of the locked pool.
It gets slower when the pool is larger - so the check is only
made when VG is finaly released and it has been used more then
once.Thus the result is rather informative.
mprotect - quite fast all the time - but requires more memory and
currently it is using posix_memalign() - this could be
later modified to use dm_malloc() and align internally.
Tool segfaults when locked memory is modified and core
could be examined for faulty code section (backtrace).
Only fast memory pools could use mprotect for now -
so such debug builds cannot be combined with DEBUG_POOL.
Implementation described in doc/lvm2-raid.txt.
Basic support includes:
- ability to create RAID 1/4/5/6 arrays
- ability to delete RAID arrays
- ability to display RAID arrays
Notable missing features (not included in this patch):
- ability to clean-up/repair failures
- ability to convert RAID segment types
- ability to monitor RAID segment types
When some target is passing empty parameters to some dm target,
report this as an internal error to better catch some broken
table construction (some mirror conversions seem to be doing
this for now).
This fn calls rm_dev_node directly - an exceptional case. It needs to check
the DM_UDEV_DISABLE_LIBRARY_FALLBACK flag directly (it's called in dm_task_run
normally where it's checked already).
and use this for the LVM critical section logic. Also report an error if
code tries to load a table while any device is known to be in the
suspended state.
(If the variety of problems these changes are showing up can't be fixed
before the next release, the error messages can be reduced to debug
level.)
are affected by the move. (Currently it's possible for I/O to become
trapped between suspended devices amongst other problems.
The current fix was selected so as to minimise the testing surface. I
hope eventually to replace it with a cleaner one that extends the
deptree code.
Some lvconvert scenarios still suffer from related problems.
Align strdup char* allocation just on 2 bytes.
It looks like wasting space to align strings on 8 bytes.
(Could be even 1byte - but for hashing it might eventually get better
perfomance - but probably hardly measurable).
TODO: check on various architectures it's not making any problems.
Avoid locking sum testing with valgrind compilation.
Make memory unaccessible in the valgrind for dm_pool_abadon_object.
Valgrind hinting should not be needed in _free_chunk for dm_free.
LVM doesn't behave correctly if running as non-root user,
there is warning when it detects it.
Despite this, it produces many error messages, saying nothing.
See https://bugzilla.redhat.com/show_bug.cgi?id=620571
This patch fixes two things:
1) Removes eror message from device_is_usable() which has no
information value anyway (real warning is printed inside it).
2) it fixes device-mapper initialization, if we support
core dm module autoload and device node is present, it should
fail early and not try recreate existing and correct node.
(non-root == permission denied here)
N.B. In future code should support user roles, some more
drastic checks in code are probably contraproductive now.
dm_hash binary functions takes void* key - so there is no need to cast
pointers to char* (also the hash key does not have trailing '\0').
This is slight API change, but presents no change for the API user side
it just allows to write code easier as the casting could be removed.
When the ->params string is empty - memory access is made on the byte
before allocated buffer (catched by valgrind) - in the case it would
constain 0x20 - it would even overwrite this buffer.
So fix by checking len > 0 before doing such access.
Also slightly optimise this loop from repeated strlen call.
As dm_report_field_string() doesn't modify content of data pointer,
it can be marked as const.
It's slight API change - but doesn't require any change on the user side
and supports wider range of arguments without const casting.
(i.e. we may use as paramater const lv struct this way: &lv->name)
As functions compiled within this define are apparently stil part of the public API,
(though lvm2 code is never using them unless this define is used for compilation),
keep functions available in the code for now -> revert.
Add new function dm_task_set_add_node() to select between 2 types
of node creation in device directory.
DM_ADD_NODE_ON_RESUME is now default and ensures node is created on
resume. Old original behavior is accessible with DM_ADD_NODE_ON_CREATE.
In this case node would be created during dmsetup create --notable.
For the user 2 new options for dmsetup create are added:
[{--addnodeonresume | --addnodeoncreate }]
Properly working node creation on resume is needed for proper operation
stacking and ability to correctly check in which state the device should
after whole udev transation.
With the ability to stack many operations in one udev transaction -
in same cases we are adding and removing same device at the same time
(i.e. deactivate followed by activate).
This leads to a problem of checking stacked operations:
i.e. remove /dev/node1 followed by create /dev/node1
If the node creation is handled with udev - there is a problem as
stacked operation gives warning about existing node1 and will try to
remove it - while next operation needs to recreate it.
Current code removes all previous stacked operation if the fs op is
FS_DEL - patch adds similar behavior for FS_ADD - it will try to
remove any 'delete' operation if udev is in use.
For FS_RENAME operation it seems to be more complex. But as we
are always stacking FS_READ_AHEAD after FS_ADD operation -
should be safe to remove all previous operation on the node
when udev is running.
Code does same checking for stacking libdm and liblvm operations.
As a very simple optimization counters were added for each stacked ops
type to avoid unneeded list scans if some operation does not exists in
the list.
Enable skipping of fs_unlock() (udev sync) if only DEL operations are staked.
as we do not use lv_info for already deleted nodes.
Fix assert abort of dmsetup (when compiled with pool debug)
dmsetup splitname --nameprefixes --noheadings --rows gvg-a2
Move pool begin in the inner loop - otherwise it would using
already 'ended' pool object.
As 'const' types are also passed to macro dm_list_struct_base -
keep offset calculation with const char pointers.
Fixes several gcc constness warnings.
Change API interface to accept even completely const array patterns.
This should present no change for libdm users and allows to pass
pattern arrays without cast to const char **.
Detect existence of new SELinux selabel interface during configure.
Use new dm_prepare_selinux_context instead of dm_set_selinux_context.
We should set the SELinux context before the actual file system object creation.
The new dm_prepare_selinux_context function sets this using the selabel_lookup
fn in conjuction with the setfscreatecon fn. If selinux/label.h interface
(that should be a part of the selinux library) is not found during configure,
we fallback to the original matchpathcon function instead.
Fix memory leak of field_id in _output_field function.
There's been a patch added recently to use dynamic allocation for metadata
tags buffer to remove the 4k limit (for writing metadata out). However, when
using reporting commands like vgs and lvs, we still need to fix libdm reporting
functions themselves to support such long outputs. So the buffer used in those
reporting functions is dynamic now.
The patch also includes a fix for field_id memory leak which was found in
the _output_field function.
Rather than hard code the size of the field, use a #define, so we can re-use.
The #define will be needed in a future patch when we extend the reporting
infrastructure to have 'get' and 'set' functions for each field, allowing
lvm2app functions which query any report field. In order to provide a
generic lookup based on the field id, we will define a type containing this
field id, and thus, we will need to re-use the length of this string as
it's defined inside libdevmapper.h.
We can't rely on the fact that udev should prepare the node with right major
and minor number to trigger the module autoloading. We have to take into
account that the node could be missing or it could exist with improper
major and minor number assigned (e.g. from previous kernel versions in
an environment with static nodes and without udev). Make any corrections
if needed!
udev_sync feature requires semaphores (part of System V IPC) to be configured
in kernel (CONFIG_SYSVIPC). Check whether it is supported and if not, give
a warning message and disable udev synchronisation code automatically to
avoid any further error states and associated problems.
One should use the kernel with System V IPC support enabled or libdevmapper
with udev_sync feature disabled.
There was missing "revert" call in _create_and_load_v4 fn while the preparation
for table load ends up with failure in create/load/resume sequence. Otherwise
we could end up with a device being created, but not table-loaded nor resumed.
Even though the table is not loaded and the device is not resumed at this
stage, we still need to synchronize with udev when calling the revert
"remove" ioctl - there's still a remove uevent generated! The "revert"
code does exactly that.
mirrors, we must also check that the log daemon (cmirrord) is running.
The log module can be auto-loaded, but the daemon cannot be
"auto-started". Failing to check for the daemon produces cryptic
messages that customers have a hard time deciphering. (The system
messages do report that the log daemon is not running, but people
don't seem to find this message easily.)
Here are examples of what is printed when the module is available,
but the log daemon has not been started.
[root@bp-01 LVM2]# lvcreate -m1 -l1 -n lv vg
Shared cluster mirrors are not available.
[root@bp-01 LVM2]# lvcreate -m1 -l1 -n lv vg -v
Setting logging type to disk
Finding volume group "vg"
Archiving volume group "vg" metadata (seqno 3).
Creating logical volume lv
Executing: /sbin/modprobe dm-log-userspace
Cluster mirror log daemon is not running
Shared cluster mirrors are not available.
Creating volume group backup "/etc/lvm/backup/vg" (seqno 4).
Switch dmeventd to use dm_create_lockfile and drop duplicate code.
Allow clvmd pidfile to be configurable.
Switch cmirrord and clvmd to use dm_create_lockfile.
When using clustered mirrors, we need device nodes to be created during
processing of device tree, not at its end like we normally do (we need to
access the nodes in cmirror prematurely). Therefore we use a new flag called
"immediate_dev_node" stored in deptree's load_properties struct to instruct the
device tree processing code to immediately synchronize with udev and flush all
stacked node operations so the nodes are prepared for use.
For now, the immediate_dev_node is used for clustered mirrors during
processing the dm_tree_preload_children code only. We can add more later if
needed.
A kernel patch is on its way for 2.6.35 adding support for dm-mod module
autoload. Udev v155 and higher is able to read static node information given
in modules.devname (extracted by depmod before) and will create such nodes
at its start. The first access to such node will load the module automatically
(directly in kernel) before the actual read/write operation is processed.
For deactivation of Replicator check in advance that all heads
have open_count == 0. For this presuspend_node is used as all
head nodes are linking this control node.
Introducing dm_tree_node_set_presuspend_node() for presuspending child
node (i.e. replicator control target) before deactivation of parent node
(i.e. replicator-dev target).
This patch presents no functional change to current dtree - only
replicator target currently sets presuspend node for dev nodes.
Use Requires.private: instead of Libs.private:
Use UDEV_PC and SELINUX_PC for Require.private:
It looks like usage of Requires.private is prefered from Libs.private.
However pkg-config documentation is really poor here. But here is
short outcome:
There is a difference in Libs.private: and Requires.private: where
we specify libselinux instead of -lselinux -lsepol.
We leave resolving of query like 'pkg-config --libs --static devmapper'
on taking proper selinux and udev libs to their .pc files instead of
hardcoding them into our .pc file which is might give incorrect answer.
- i.e. dependency of libselinux package might change and we may return
wrong list of linked libraries.
http://bugs.freedesktop.org/show_bug.cgi?id=4738http://err.no/personal/blog/tech/2008-03-25-18-07_pkg-config,_sonames_and_Requires.private
(with table provided).
This remove ioctl generates udev events like any other hence it needs to be
synchronized properly as well. Also, add dm task type in debug log when
setting a cookie (for better debugging).
This rule appeared in udev v152 and it helps us to support spurious events
where we didn't have any flags set (events originated in udevadm trigger
or the watch rule). These flags are important to direct the rule application.
Now, with the help of this rule, we can regenerate old udev db content.
To implement this correctly, we need to flag all proper DM udev events with
DM_UDEV_PRIMARY_SOURCE_FLAG. That happens automatically for all ioctls
generating events originated in libdevmapper.
Patch is inspired by Debian's extra patch.
- removes OWNER & GROUP make vars they are parts of INSTALL command.
- adds INSTALL_PROGRAM for executable, uses $(INSTALL)
- adds INSTALL_DATA for non-executable data, uses ($INSTALL)
- adds INSTALL_WDATA for writable non-executable data, uses ($INSTALL)
- adds configure option --enable-write_install - to support
installatin of writable files used by distribution
- replaces usage of ifeq @LIB_SUFFIX@ with $(LIB_SUFFIX)
- installs .a files from static builds without executable flag
- installs .a files to $(usrlibdir) instead of $(libdir)
- installs all static binaries to $(staticdir)
- create .so links for devel package in $(usrlibdir) instead of
$(libdir)
- makes .so and .so.LIB_VERSION files within builddir
- removes VERSIONED_SHLIB and created versioned LIB_SHARED automagicaly
- install LIB_SHARED via install_lib_shared target
- install plugins via install_lib_shared_plugin target
- prints whole 'install' command during installation instead of less
informative "Installing $(something) $(somewhere)"
- install multiple man pages with one INSTALL command
- use DISTCLEAN_TARGETS instead of creating multiple distclean targets
Usage of VPATH makes troubles when used within $(builddir).
Not only source files are being found through VPATH,
but targets as well. (make --debug=v)
Thus if user builds the code in $(srcdir) and also in some $(builddir)
he gets mangled results as some generated files (i.e. .export.sym)
are 'reused' from $(srcdir) instead of $(builddir).
This patch switches to use vpath were we could explicitly name
suffixes that should be looked via vpath - we must take care,
we do not generate files with these suffixes:
.c, .in, .po, .exported_symbols
in clvmd, dmevend, man, tests.
Don't include dependency files for clow and cscope.out targets
Improve dependency tracking for dmeventd and liblvm2cmd sources.
to obtain sources. Create make.tmpl target for
simplier generation of cflow files with the help of
CFLOW_LIST, CFLOW_LIST_TARGET, CFLOW_TARGET.
Still cflow usage is not perfect.
This prevents some confusion when libudev was not found so udev_sync was disabled
automatically. Configure was successful though giving only a tiny warning.
Also, if "dmsetup udevcreatecookie" is used, never return 0x000000 as a result if
udev is not running and keep the output blank.
We need to know whether we should wait for any uevent or not when
using udev_sync. A kernel patch was posted recently that changed the
way uevents are sent on dm device resume - it is sent only if the
device has been suspended before. There's also a new DM_UEVENT_GENERATED_FLAG
in the ioctl to notify userspace whether the event was generated.
If the uevent was not generated (e.g. the situation where the device is
*not* suspended and we call a resume), we just call dm_udev_complete
explicitly from within libdevmapper itself to prevent infinite waiting
while trying to synchronise with udev processing.
For static builds dependency for SELinux libs is not handled by 'ar'.
Till better solution is found, for static builds STATIC_LIBS is used.
Patch updates SELinux detection to use 3rd & 4th parameter for Success/Fail.
Also removes detection of pthread from this check as we know which
version of libdevmapper we are going to link with lvm after merge.
SELinux header check moved to the SELinux test code.
