1
0
mirror of git://sourceware.org/git/lvm2.git synced 2024-12-22 17:35:59 +03:00
Commit Graph

323 Commits

Author SHA1 Message Date
Zdenek Kabelac
01c438a96c format-text: ensure aligment is not 0
Make sure this path of code is not used for alignment == 0,
to prevent division by 0.
2013-11-28 12:42:39 +01:00
Zdenek Kabelac
3d3b8bfd1c pv_write: check for lvmcache_add_mda failure
Add missing test of failing lvmcache_add_mda() call.
2013-11-22 20:55:09 +01:00
Petr Rockai
9b91977f4e labeller: Make the use of "private" as "fmt" explicit.
All labellers always use the "private" (void *) field as the fmt pointer. Making
this fact explicit in the type of the labeller simplifies the label reporting
code which needs to extract the format. Moreover, it removes a number of
error-prone casts from the code.
2013-11-17 21:41:27 +01:00
Peter Rajnoha
34d207d9b3 lvmetad: fix mda offset/size overflow if >= 4g (32bit)
When reading an info about MDAs from lvmetad, we need to use 64 bit
int to read the value of the offset/size, otherwise the value is
overflows and then it's used throughout!

This is dangerous if we're trying to write such metadata area then,
mostly visible if we're using 2 mdas where the 2nd one is at the end
of the underlying device and hence the value of the mda offset is
high enough to cause problems:

(the offset trimmed to value of 0 instead of 4096m, so we write
at the very start of the disk (or elsewhere if the offset has
some other value!)

[1] raw/~ # lvcreate -s -l 100%FREE vg --virtualsize 4097m
  Logical volume "lvol0" created

[1] raw/~ # pvcreate --metadatacopies 2 /dev/vg/lvol0
  Physical volume "/dev/vg/lvol0" successfully created

[1] raw/~ # hexdump -n 512 /dev/vg/lvol0
0000000 0000 0000 0000 0000 0000 0000 0000 0000
*
0000200

[1] raw/~ # pvchange -u /dev/vg/lvol0
  Physical volume "/dev/vg/lvol0" changed
  1 physical volume changed / 0 physical volumes not changed

[1] raw/~ # hexdump -n 512 /dev/vg/lvol0
0000000 d43e d2a5 4c20 4d56 2032 5b78 4135 7225
0000010 4e30 3e2a 0001 0000 0000 0000 0000 0000
0000020 0000 0010 0000 0000 0000 0000 0000 0000
0000030 0000 0000 0000 0000 0000 0000 0000 0000
*
0000200

=======

(the offset overflows to undefined values which is far behind
the end of the disk)

[1] raw/~ # lvcreate -s -l 100%FREE vg --virtualsize 100g
  Logical volume "lvol0" created

[1] raw/~ # pvcreate --metadatacopies 2 /dev/vg/lvol0
  Physical volume "/dev/vg/lvol0" successfully created

[1] raw/~ # pvchange -u /dev/vg/lvol0
  /dev/vg/lvol0: lseek 18446744073708503040 failed: Invalid argument
  /dev/vg/lvol0: lseek 18446744073708503040 failed: Invalid argument
  Failed to store physical volume "/dev/vg/lvol0"
  0 physical volumes changed / 1 physical volume not changed
2013-08-06 13:37:42 +02:00
Peter Rajnoha
e21e38cf74 metadata: add support for storing profile name in metadata (during vgcreate/lvcreate)
If "vgcreate/lvcreate --profile <profile_name>" is used, the profile
name is automatically stored in metadata for making it possible to
load it automatically next time the VG/LV is used.
2013-07-02 15:19:09 +02:00
Peter Rajnoha
50bf2c0db1 config: add profile arg to find_config_tree_int 2013-07-02 15:19:09 +02:00
Peter Rajnoha
eeb7b0f7fa config: add profile arg to find_config_tree_node 2013-07-02 15:19:09 +02:00
Peter Rajnoha
6de45db5b5 cleanup: clear outdated comment (TODO already done) 2013-06-27 15:26:39 +02:00
Zdenek Kabelac
2562968864 vgcfgrestore: fix crash on restore of wrong vgname
When vgname has not existed in metadata, it has crashed on double free
in format_instance destroy() -  since VG was created, used FID and was
released - which also released FID, so further use was accessing bad
memory.

Fix it for this code path before release_vg() so FID will exists
when _vg_read_file_name() returns NULL.
2013-06-18 22:11:21 +02:00
Peter Rajnoha
732859d21f refactor: rename embedding area -> bootloader area 2013-05-28 12:37:22 +02:00
Peter Rajnoha
386886f71c config: refer to config nodes using assigned IDs
For example, the old call and reference:

  find_config_tree_str(cmd, "devices/dir", DEFAULT_DEV_DIR)

...now becomes:

  find_config_tree_str(cmd, devices_dir_CFG)

So we're referring to the named configuration ID instead
of passing the configuration path and the default value
is taken from central config definition in config_settings.h
automatically.
2013-03-06 10:14:33 +01:00
Peter Rajnoha
b778653f03 pv_header_extension: add support for writing PV header extension (flags & Embedding Area)
The PV header extension information (PV header extension version, flags
and list of Embedding Area locations) is stored just beyond the PV header base.

When calculating the Embedding Area start value (ea_start), the same logic is
used as when calculating the pe_start value for Data Area - the value must
follow exactly the same alignment restrictions for its start value
(the alignment detected automatically or provided via command line using
the --dataalignment and --dataalignmentoffset arguments).

The Embedding Area is placed at the very start of the PV, starting at
ea_start. The Data Area starting at pe_start is placed next. The pe_start is
still properly aligned. Due to the pe_start alignment, it's possible that the
resulting Embedding Area size (ea_size) ends up bigger in size than requested
(but never less than requested).
2013-02-26 11:28:00 +01:00
Peter Rajnoha
60c5d4c42f pv_header_extension: add supporting infrastructure for PV header extension (flags & Embedding Area)
PV header extension comes just beyond the existing PV header base:

PV header base (existing):
 - uuid
 - device size
 - null-terminated list of Data Areas
 - null-terminater list of MetaData Areas

PV header extension:
 - extension version
 - flags
 - null-terminated list of Embedding Areas

This patch also adds "eas" (Embedding Areas) list to lvmcache (lvmcache_info)
and it also adds support for common operations on the list (just like for
already existing "das" - Data Areas list):
 - lvmcache_add_ea
 - lvmcache_update_eas
 - lvmcache_foreach_ea
 - lvmcache_del_eas

Also, add ea_start and ea_size to struct physical_volume for processing
PV Embedding Area location throughout the code (currently only one
Embedding Area is supported, though the definition on disk allows for
more if needed in the future...).

Also, define FMT_EAS format flag to mark that the format actually
supports Embedding Areas (currently format-text only).
2013-02-26 11:25:16 +01:00
Peter Rajnoha
6d8de3638c cleanup: use struct pvcreate_restorable_params throughout 2013-02-26 11:25:11 +01:00
Peter Rajnoha
303e86adc8 pvcreate: fix alignment to incorporate alignment offset if PV has 0 MDAs
If zero metadata copies are used, there's no further recalculation of
PV alignment that happens when adding metadata areas to the PV and
which actually calculates the alignment correctly as a matter of fact.
So fix this for "PV without MDA" case as well.

Before this patch:
[1] raw/~ # pvcreate --dataalignment 8m --dataalignmentoffset 4m
--metadatacopies 1 /dev/sda
  Physical volume "/dev/sda" successfully created
[1] raw/~ # pvs -o pv_name,pe_start
  PV         1st PE
  /dev/sda    12.00m
[1] raw/~ # pvcreate --dataalignment 8m --dataalignmentoffset 4m
--metadatacopies 0 /dev/sda
  Physical volume "/dev/sda" successfully created
[1] raw/~ # pvs -o pv_name,pe_start
  PV         1st PE
  /dev/sda     8.00m

After this patch:
[1] raw/~ # pvcreate --dataalignment 8m --dataalignmentoffset 4m
--metadatacopies 1 /dev/sda
  Physical volume "/dev/sda" successfully created
[1] raw/~ # pvs -o pv_name,pe_start
  PV         1st PE
  /dev/sda    12.00m
[1] raw/~ # pvcreate --dataalignment 8m --dataalignmentoffset 4m
--metadatacopies 0 /dev/sda
  Physical volume "/dev/sda" successfully created
[1] raw/~ # pvs -o pv_name,pe_start
  PV         1st PE
  /dev/sda    12.00m

Also, remove a superfluous condition "pv->pe_start < pv->pe_align" in:
  if (pe_start == PV_PE_START_CALC && pv->pe_start < pv->pe_align)
    pv->pe_start = pv->pe_align ...
This part of the condition is not reachable as with the PV_PE_START_CALC,
we always have pv->pe_start set to 0 from the PV struct initialisation
(...the pv->pe_start value is just being calculated).
2013-02-21 14:51:19 +01:00
Alasdair G Kergon
06abb2dd4c logging: classify log_debug messages
Place most log_debug() messages into a class.
2013-01-07 22:30:29 +00:00
Zdenek Kabelac
ff5612c0c3 format-text: check for _text_create_text_instance
Test if 'fid' creation failed and report stack trace,
break the loop and do not pass NULL fid further.
2012-12-15 17:23:23 +01:00
Zdenek Kabelac
21f6511bc2 cleanup: reorder code
Swap if() test condition and check for failure
and use traditional 'stack' trace.
2012-12-15 14:57:40 +01:00
Petr Rockai
c9f56d639b lvmetad: Use "%" PRId64 in place of "%d" for extra clarity. 2012-09-26 17:26:16 +02:00
Petr Rockai
2276379a71 lib/cache/lvmetad: Refactor to use dm_config_tree in requests.
We were using daemon_send_simple until now, but it is no longer adequate, since
we need to manipulate requests in a generic way (adding a validity token to each
request), and the tree-based request interface is much more suitable for this.
2012-09-26 14:49:15 +02:00
Zdenek Kabelac
286cd2006b cleanup: drop unneeded included header files
This headers were not resolving anything used for compiled .c files.
Remove unused util.c file.
2012-08-23 14:37:20 +02:00
Zdenek Kabelac
6f3cd63551 cleanup: replace memset with struct initilization
Simplifies the code, properly detects too long socket paths,
drops unused parameter.
2012-06-22 13:23:03 +02:00
Peter Rajnoha
9c17acdfe8 Fix division by zero if PV with zero PE count is used during vgcfgrestore. 2012-05-09 12:30:56 +00:00
Peter Rajnoha
cb08b8eb7e Check if info struct returned is not NULL.
Just some missing checks revealed by Coverity in recent code.
2012-04-10 12:26:27 +00:00
Alasdair Kergon
9c159ea320 Pass struct device around internally rather than dev_t.
Add 3rd daemon return state "unknown" for lookups that are carried out
successfully but don't find the item requested.
Avoid issuing error messages when it's expected that a device that's
being looked up in lvmetad might not be there.
2012-03-02 20:46:36 +00:00
Alasdair Kergon
5b613cff97 Pass 'single_device' parameter down to suppress 'Can't find uuid' messages
when reading VG text metadate and called from pvscan --lvmetad.

(Longer-term, that check needs moving outside of that code.)
2012-02-29 02:35:35 +00:00
Zdenek Kabelac
a46cc72fd2 Add some stack traces for dev_close error paths 2012-02-28 10:11:35 +00:00
Zdenek Kabelac
c608e46675 Remove test for pvid
Since pvid is char buffer[] and not pointer,
there is no point to check it for NULL.
2012-02-27 09:54:25 +00:00
Zdenek Kabelac
b6c5ea358e Some reformating for lvmetad uddates
cleanup gcc warning,
use PRIu64
header cleanups
const pointer fixes.
2012-02-23 17:59:32 +00:00
Petr Rockai
dae0822698 The lvmetad client-side integration. Only active when use_lvmetad = 1 is set in
lvm.conf *and* lvmetad is running.
2012-02-23 13:11:07 +00:00
Zdenek Kabelac
bed744c15d Add check for mda_copy failure 2012-02-13 11:09:25 +00:00
Zdenek Kabelac
52f2f3eae4 Add free_orphan_vg
Move commod code to destroy orphan VG into free_orphan_vg() function.
Use orphan vgmem for creation of PV lists.
Remove some free_pv_fid() calls (FIXME: check all of them)
FIXME: Check whether we could merge release_vg back again for all VGs.
2012-02-13 11:03:59 +00:00
Zdenek Kabelac
f9411bb2af Clean error paths for format instance
With updated orphan VG code this code needed some updates.
Add missing log_error for allocation failures.
2012-02-13 10:56:31 +00:00
Alasdair Kergon
b719e3d323 FMT_INSTANCE_VG is redundant now 2012-02-12 23:01:19 +00:00
Petr Rockai
6e41729eb8 Keep a global (per-format) orphan_vg and keep any and all orphan PVs linked to
it. Avoids the need for FMT_INSTANCE_PV and enables further simplifications. No
functional change, internal refactor only.
2012-02-10 02:53:03 +00:00
Petr Rockai
8e5f7cf3dc Move lvmcache data structures behind an API (making the structures private to
lvmcache.c). No functional change.
2012-02-10 01:28:27 +00:00
Zdenek Kabelac
ee54e43702 Fix resource leaks for failing allocation
In case, something would fail during format initialization,
return allocated memory.
2012-02-08 10:49:36 +00:00
Zdenek Kabelac
900f5f8187 Replace dynamic buffer allocations for PATH_MAX
Use static buffer instead of stack allocated buffer.
This reduces stack size usage of lvm tool and the
change is very simple.

Since the whole library is not thread safe - it should not
add any new problems - and if there will be some conversion
it's easy to convert this to use some preallocated buffer.
2011-11-18 19:31:09 +00:00
Petr Rockai
e59e2f7c3c Move the core of the lib/config/config.c functionality into libdevmapper,
leaving behind the LVM-specific parts of the code (convenience wrappers that
handle `struct device` and `struct cmd_context`, basically). A number of
functions have been renamed (in addition to getting a dm_ prefix) -- namely,
all of the config interface now has a dm_config_ prefix.
2011-08-30 14:55:15 +00:00
Peter Rajnoha
d35188058b Directly allocate buffer memory in a pvck scan instead of using a mempool.
There's a very high memory usage when calling _pv_analyse_mda_raw (e.g. while
executing pvck) that can end up with "out of memory".

_pv_analyse_mda_raw scans for metadata in the MDA, iteratively increasing the
size to scan with SECTOR_SIZE until we find a probable config section or we're
at the edge of the metadata area. However, when using a memory pool, we're also
iteratively chasing for bigger and bigger mempool chunk which can't be found
and so we're always allocating a new one, consuming more and more memory...

This patch just changes the mempool to direct memory allocation in this
problematic part of the code.
2011-08-29 13:37:36 +00:00
Zdenek Kabelac
077a6755ff Replace free_vg with release_vg
Move the free_vg() to  vg.c  and replace free_vg  with release_vg
and make the _free_vg internal.

Patch is needed for sharing VG in vginfo cache so the release_vg function name
is a better fit here.
2011-08-10 20:25:29 +00:00
Petr Rockai
6d25c0d26f Fix RHBZ 651590 (failure to lock LV results in failure to repair mirror after
transient error), stemming from the following sequence of events:

1) devices fail IO, triggering repair
2) dmeventd starts fixing up the mirror
3) during the downconversion, a new metadata version is written

--> the devices come back online here

4) the mirror device suspend/resume is called to update DM tables
5) during the suspend/resume cycle, *pre*-commit metadata is read;
   however, since the failed devices are now back online, we get back
   inconsistent set of precommit metadata and the whole operation fails

The patch relaxes the check that fails in step 5 above, namely by ignoring
inconsistencies coming from PVs that are marked MISSING.
2011-06-15 17:45:02 +00:00
Alasdair Kergon
3cac20f850 Defer writing PV labels to vg_write.
Store label_sector only in struct physical_volume.
2011-06-01 19:29:31 +00:00
Peter Rajnoha
c08c564e21 Use new dev_open_readonly fn to prevent opening devices for read-write when not necessary.
Before, we used vg_write_lock_held call to determnine the way a device is
opened. Unfortunately, this opened many devices in RW mode when it was not
really necessary. With the OPTIONS+="watch" rule used in the udev rules,
this could fire numerous events while closing such devices (and it caused
useless scans from within udev rules in return).

A common bug we hit with this was with the lvremove command which was unable
to remove the LV since it was being opened from within the udev rules. This
patch should minimize such situations (at least with respect to LVM handling
of devices).

Though there's still a possibility someone will open a device 'outside' in
parallel and fire the event based on the watch rule when closing a device
once opened for RW.
2011-05-28 09:48:14 +00:00
Zdenek Kabelac
b680d5bf7b Fix use of released vgname and vgid
Avoid using of already released memory when duplicated MDA is found.

As get_pv_from_vg_by_id() may call lvmcache_label_scan() use the local copy
of the vgname and vgid on the stack as vginfo may dissapear and code was
then accessing garbage in memory.

i.e.  pvs  /dev/loop0
(when /dev/loop0 and /dev/loop1 has same MDA content)

Invalid read of size 1
   at 0x523C986: dm_hash_lookup (hash.c:325)
   by 0x440C8C: vginfo_from_vgname (lvmcache.c:399)
   by 0x4605C0: _create_vg_text_instance (format-text.c:1882)
   by 0x46140D: _text_create_text_instance (format-text.c:2243)
   by 0x47EB49: _vg_read (metadata.c:2887)
   by 0x47FBD8: vg_read_internal (metadata.c:3231)
   by 0x477594: get_pv_from_vg_by_id (metadata.c:344)
   by 0x45F07A: _get_pv_if_in_vg (format-text.c:1400)
   by 0x45F0B9: _populate_pv_fields (format-text.c:1414)
   by 0x45F40F: _text_pv_read (format-text.c:1493)
   by 0x480431: _pv_read (metadata.c:3500)
   by 0x4802B2: pv_read (metadata.c:3462)
 Address 0x652ab80 is 0 bytes inside a block of size 4 free'd
   at 0x4C2756E: free (vg_replace_malloc.c:366)
   by 0x442277: _free_vginfo (lvmcache.c:963)
   by 0x44235E: _drop_vginfo (lvmcache.c:992)
   by 0x442B23: _lvmcache_update_vgname (lvmcache.c:1165)
   by 0x443449: lvmcache_update_vgname_and_id (lvmcache.c:1358)
   by 0x443C07: lvmcache_add (lvmcache.c:1492)
   by 0x46588C: _text_read (text_label.c:271)
   by 0x466A65: label_read (label.c:289)
   by 0x4413FC: lvmcache_label_scan (lvmcache.c:635)
   by 0x4605AD: _create_vg_text_instance (format-text.c:1881)
   by 0x46140D: _text_create_text_instance (format-text.c:2243)
   by 0x47EB49: _vg_read (metadata.c:2887)

Add testing script
2011-04-21 13:13:40 +00:00
Peter Rajnoha
ff4479414c Use format instance mempool where possible and adequate. 2011-03-11 15:10:16 +00:00
Peter Rajnoha
1307ddf4cf Use only vg_set_fid and new pv_set_fid fn to assign the format instance.
This is essential for proper format instance ref_count support. We must
use these functions to set the fid everywhere from now on, even the NULL
value!
2011-03-11 14:50:13 +00:00
Peter Rajnoha
293481107f Make create_text_context fn static and move it inside create_instance fn.
We'd like to use the fid mempool for text_context that is stored
in the instance (we used cmd mempool before, so the order of
initialisation was not a matter, but now it is since we need to
create the fid mempool first which happens in create_instance fn).

The text_context initialisation is not needed anywhere outside the
create_instance fn so move it there.
2011-03-11 14:45:17 +00:00
Peter Rajnoha
a1bec4e685 Add mem and ref_count fields to struct format_instance for own mempool use.
Format instances can be created anytime on demand and it contains
metadata area information mostly (at least for now, but in the future,
we may store more things here to update/edit in a PV/VG). In case we
have lots of metadata areas, memory consumption will rise. Using cmd
context mempool is not quite optimal here because it is destroyed too
late. So let's use a separate mempool for format instances.

Reference counting is used because fids could be shared, e.g. each PV
has either a PV-based fid or VG-based fid. If it's VG-based, each PV has
a shared fid with the VG - a reference to VG's fid.
2011-03-11 14:38:38 +00:00
Peter Rajnoha
56f5b12eed Use new alloc_fid fn for common format instance initialisation. 2011-03-11 14:30:27 +00:00
Peter Rajnoha
15b9215534 Use a copy if moving an mda from pv fid to vg fid.
We'll destroy the pv fid (with all mdas in it) after merging all pv mdas to
a vg in _text_pv_setup fn, hence we need to use a copy here!
2011-03-02 10:23:29 +00:00
Peter Rajnoha
0b100565ae Make add_metadata_area_to_pv/remove_metadata_area_from_pv static.
No need to put these in format-text.h, it's not used anywhere else actually.
2011-03-02 10:19:14 +00:00
Peter Rajnoha
150e43a05c Use pv->vg_name directly instead of pv->vg->name in _text_pv_write.
This also prevents a possible segfault during an automatic repair
when the PV does not belong to a VG anymore and we call pv_write_orphan.
2011-02-28 17:05:48 +00:00
Peter Rajnoha
3b97e8d643 Allow non-orphan PVs with two metadata areas to be resized.
We allow writing non-orphan PVs only for resize now. The "orphan PV" assert
in pv_write fn uses the "allow_non_orphan" parameter to control this assert.
However, we should find a more elaborate solution so we can remove this
restriction altogether (pv_write together with vg_write is not atomic, we
need to find a safe mechanism so there's an easy revert possible in case of
an error).
2011-02-28 13:19:02 +00:00
Peter Rajnoha
4a304dc1d8 Allow only orphan PVs to be resized even with two metadata areas. 2011-02-25 14:08:54 +00:00
Peter Rajnoha
38b0564cab Read PV metadata information from cache if pv_setup called with pv->fid == vg->fid.
If the PV is already part of the VG (so the pv->fid == vg->fid), it makes no
sense to attach the mdas information from PV to a VG. Instead, we read new
PV metadata information from cache and attach it to the VG fid.
2011-02-25 13:59:47 +00:00
Peter Rajnoha
ea4a41e961 Fix a bug in metadata location calculation, cleanup pv_add_metadata_area fn.
This bug (a missing line) caused the 2nd MDA area location to be calculated
incorrectly and it didn't fit the disk size properly.

(https://www.redhat.com/archives/lvm-devel/2011-February/msg00127.html)
2011-02-25 13:50:02 +00:00
Peter Rajnoha
51aed1992f Add old_uuid field to struct physical_volume so we can still reference a PV
with its old UUID when we're changig it (the cache as well as metadata area
index has the old uuid that we need to use to access the information!)
2011-02-21 12:31:28 +00:00
Peter Rajnoha
cb2396730a Change pvresize code to work with new metadata handling interface and allow
resizing a PV with two metadata areas.
2011-02-21 12:27:26 +00:00
Peter Rajnoha
17ad2b1115 Change pv_write code to work with the changes in metadata handling interface
and changes in format_instance.
2011-02-21 12:26:27 +00:00
Peter Rajnoha
903d7db050 Remove unused _mda_setup fn. This functionality is covered by new pv_add_metadata_area fn. 2011-02-21 12:25:16 +00:00
Peter Rajnoha
94d91fdda1 Change the code throughout to use new pv_initialise and modified pv_setup fn.
Change pv_create code to work with these changes together with using new
pv_add_metadata_area fn to add metadata areas for a PV being created.
2011-02-21 12:24:15 +00:00
Peter Rajnoha
617b900d85 Separate new pv_initialise function out of the original pv_setup code.
pv_initiliase initialises a new PV
pv_setup sets up an existing PV with a VG
2011-02-21 12:20:18 +00:00
Peter Rajnoha
981895a860 Add new pv_remove_metadata_area interface function. 2011-02-21 12:17:54 +00:00
Peter Rajnoha
8d5d20a526 Add new pv_add_metadata_area interface function. 2011-02-21 12:17:26 +00:00
Peter Rajnoha
305816232d Remove useless mdas parameter for pv_read (from now on, we store mdas in a
format instance)
2011-02-21 12:15:59 +00:00
Peter Rajnoha
c0c21864c6 Change the code throughout for recent changes in format_instance handling. 2011-02-21 12:07:03 +00:00
Peter Rajnoha
88129db5e1 Change create_instance to create PV-based as well as VG-based format instances.
Add supporting functions to work with the format instance and metadata area
structures stored within the format instance. Add support for simple indexing
of metadata areas using PV id and mda order (for on-disk PV only for now, we
can extend the indexing even for other mdas if needed - we only need to define
a proper key for the index).
2011-02-21 12:05:49 +00:00
Zdenek Kabelac
b1bcff7424 Critical section
New strategy for memory locking to decrease the number of call to
to un/lock memory when processing critical lvm functions.

Introducing functions for critical section.

Inside the critical section - memory is always locked.
When leaving the critical section, the memory stays locked
until memlock_unlock() is called - this happens with
sync_local_dev_names() and sync_dev_names() function call.

memlock_reset() is needed to reset locking numbers after fork
(polldaemon).

The patch itself is mostly rename:

memlock_inc  -> critical_section_inc
memlock_dec  -> critical_section_dec
memlock      -> critical_section

Daemons (clmvd, dmevent) are using memlock_daemon_inc&dec
(mlockall()) thus they will never release or relock memory they've
already locked memory.

Macros sync_local_dev_names() and sync_dev_names() are functions.
It's better for debugging - and also we do not need to add memlock.h
to locking.h header (for memlock_unlock() prototyp).
2011-02-18 14:16:11 +00:00
Zdenek Kabelac
16f000bcb4 Fix wipe size when seting up mda. 2011-02-03 01:41:03 +00:00
Zdenek Kabelac
9d9de35dca Remove const usage from destroy callbacks
As const segment_type or const format_type are never released
use their non-const version and remove const downcast from dm_free calls.
This change fixes many gcc warnings we were getting from them.
2010-12-20 13:32:49 +00:00
Zdenek Kabelac
760d1fac55 Add more strict const pointers around config tree
To have better control were the config tree could be modified use more
const pointers and very carefully downcast them back to non-const
(for config tree merge).
2010-12-20 13:12:55 +00:00
Alasdair Kergon
acb037657c Fix scanning of VGs without in-PV mdas.
Set cmd->independent_metadata_areas if metadata/dirs or disk_areas in use.
- Identify and record this state.

Don't skip full scan when independent mdas are present even if memlock is set.
- Clusters and OOM aren't supported, so no problem doing the proper scans.

Avoid revalidating the label cache immediately after scanning.
- A simple optimisation.

Support scanning for a single VG in independent mdas.
- Not used by the fix but I left it in anyway as later patches might use it.
2010-12-10 22:39:52 +00:00
Alasdair Kergon
2b82bd79f5 Rename vg_release to free_vg. 2010-12-08 20:50:48 +00:00
Zdenek Kabelac
dce59eb407 Remove unused 'i' in _pv_analyze_mda_raw
'i' is unused in the function - remove it.
2010-11-29 11:16:58 +00:00
Zdenek Kabelac
419d5219cb Fix NULL pointer dereference for too large MDA error path
Replace dereference of NULL vg with passed vgname to the function
_vg_read_raw_area() in the error path for too large MDA.
2010-10-26 09:13:13 +00:00
Dave Wysochanski
637ac19e60 Rename 'flags' to 'status' for struct metadata_area.
In other LVM memory structures such as volume_group, the field
used to store flags is called "status", and on-disk fields are called
'flags', so rename the one inside metadata_area to be consistent.
Not only is it more consistent with existing code but is cleaner
to say "the status of this mda is ignored".

Background for this patch - prajnoha pinged me on IRC this morning
about a fix he was working on related to metadataignore when
metadata/dirs was set.  I was reviewing my patches from this year
and realized the 'flags' field was probably not the best choice
when I originally did the metadataignore patches.
2010-10-05 17:34:05 +00:00
Peter Rajnoha
5936dd0381 Fix memory leak of vg_read while using live copies of metadata in directories. 2010-09-30 14:12:14 +00:00
Alasdair Kergon
44a31a9c2f Speed up CRC32 calculations by using a larger lookup table.
Use -DDEBUG_CRC32 to revert to old function and check new one gives same result.
2010-09-27 19:09:34 +00:00
Milan Broz
fc86426b56 Fix previous const removal. 2010-08-26 12:22:05 +00:00
Mike Snitzer
4efb1d9cbb Update heuristic used for default and detected data alignment.
Add "devices/default_data_alignment" to lvm.conf to control the internal
default that LVM2 uses: 0==64k, 1==1MB, 2==2MB, etc.

If --dataalignment (or lvm.conf's "devices/data_alignment") is specified
then it is always used to align the start of the data area.  This means
the md_chunk_alignment and data_alignment_detection are disabled if set.

(Same now applies to pvcreate --dataalignmentoffset, the specified value
will be used instead of the result from data_alignment_offset_detection)

set_pe_align() still looks to use the determined default alignment
(based on lvm.conf's default_data_alignment) if the default is a
multiple of the MD or topology detected values.
2010-08-20 20:59:05 +00:00
Mike Snitzer
14a9722185 Avoid changing aligned pe_start as a side-effect of very verbose logging. 2010-08-03 18:19:42 +00:00
Alasdair Kergon
08f1ddea6c Use __attribute__ consistently throughout. 2010-07-09 15:34:40 +00:00
Dave Wysochanski
a5fb2bbff3 Pass metadataignore to pv_create, pv_setup, _mda_setup, and add_mda.
Pass metadataignore through PV creation / setup paths.
As a result of this cleanup, we can remove the unnecessary setting
of mda_ignore bits inside pvcreate_single(), after call to pv_create.
For now, just set metadataignore to '0' in some places.  This is
equivalent to the prior functionality, although the 0 is given
by the caller not hardcoded in _mda_setup() call.

Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
2010-07-08 18:24:29 +00:00
Alasdair Kergon
23177eda88 more metadataignore message/code cleanup 2010-06-30 17:13:05 +00:00
Alasdair Kergon
647c64c796 Improve various log messages. 2010-06-30 13:51:11 +00:00
Dave Wysochanski
a5bf70018b Add --metadataignore to pvcreate.
Allow metadataignore flag to be passed in to pvcreate.
Ideally, more refactoring of the mda allocation / initialization
is warranted, but for now, we just add another parameter to 'add_mda'
to take an existing mda ignored flag.  We need to do this or pv_write
loses the state of the mda 'ignored' flag before copying and writing
to disk.
2010-06-30 12:17:24 +00:00
Dave Wysochanski
d37dd5b2d3 Improve logging for metadata ignore by printing device name.
Print device name when setting or clearing metadata ignore bit.
Example:
label/label.c:160       /dev/loop2: lvm2 label detected
cache/lvmcache.c:1136         lvmcache: /dev/loop2: now in VG #orphans_lvm2 (#orphans_lvm2)
metadata/metadata.c:4142     Setting mda ignored flag for metadata_locn /dev/loop2.
format_text/text_label.c:318     Skipping mda with ignored flag on device /dev/loop2 at offset 4096
2010-06-29 22:37:32 +00:00
Dave Wysochanski
5778fdeeb8 Add more initializations of 'mda->flags' field.
Mda allocation needs refactored into a single function but as an
interim step, ensure mda->flags is initialized properly.
2010-06-29 14:52:56 +00:00
Dave Wysochanski
fa832e3a55 Attempt to fix intermittent failure with non-debug configured vgcfgbackup.
There's an intermittent failure with vgcfgbackup that seems to have been
introduced with the metadataignore / vgmetadatacopies patchset.
Intermittent failures are often the result of uninitialized data,
so this patch calls zalloc in a few places it might matter.
2010-06-29 13:29:53 +00:00
Dave Wysochanski
69d1732334 Update _vg_read and _text_create_text_instance to use fid_add_mda[s].
When we are constructing the vg, we may need to adjust the list of
metadata_areas if there are ignored mdas.  At label read time, we
do not read the metadata of ignored mdas, and as a result, they do
not get placed on vg->fid->metadata_areas inside _text_create_text_instance
since lvmcache does not have these areas attached to vginfo->infos.
However, when we're checking the pvids inside _vg_read, after having
read another metadata area from another PV, we do have the opportunity
to update the metadata_area and metadata_areas_ignored lists based
on the read metadata_area.  We need accurate mda lists for the reporting
functions that count the ignored mdas, as well as general correctness
of mda balancing.

Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
2010-06-28 20:35:17 +00:00
Dave Wysochanski
9ccac021a7 Add metadata_areas_ignored list and functions to manage ignored mdas.
Add a second mda list, metadata_areas_ignored to fid, and a couple
functions, fid_add_mda() and fid_add_mdas() to help manage the lists.

These functions are needed to properly count the ignored mdas and
manage the lists attached to the 'fid' and ultimately the 'vg'.

Ensure metadata_areas_ignored is initialized in other formats, even
if the list is never used.

Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
2010-06-28 20:33:22 +00:00
Dave Wysochanski
f55a20eb36 Rename fid->metadata_areas to fid->metadata_areas_in_use.
Rename the metadata_areas list to an 'in_use' list to prepare for
future 'ignored' list.
2010-06-28 20:32:44 +00:00
Dave Wysochanski
ef4fa155a5 Add mda location specific mda_copy constructor.
Because of the way mdas are handled internally, where a PV in a VG
has mdas on both info->mdas and vg->fid->metadata_areas list, we
need a location independent copy constructor for struct
metadata_area.  Break up the existing format-text specific copy
constructor into a format independent piece and a format dependent
piece.

This function is necessary to properly implement pv_set_mda_ignored().

Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Reviewed-by: Alasdair G Kergon <agk@redhat.com>
2010-06-28 20:31:59 +00:00
Dave Wysochanski
29f24d4634 Add mda_locns_match() internal library function for mapping pv/device to VG mda.
A metadata_area is defined independent of the location.  One downside
is that there is no obvious mapping from a pv to an mda.  For a PV in
a VG, we need a way to start with a PV and end up with an MDA, if we
are to manage mdas starting with a device/pv.  This function provides
us a way to go down the list of PVs on a VG, and identify which ones
match a particular PV.

I'm not entirely happy with this approach, but it does fit into the
existing structures in a reasonable way.

An alternative solution might be to refactor the VG - PV interface such
that mdas are a list tied to a PV.  However, this seemed a bit tricky since
a PV does not come into existence until after the list of mdas is
constructed (see _vg_read() - we create a 'fid' and attach mdas to it,
then we go through them and attach pvs).

Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Reviewed-by: Alasdair G Kergon <agk@redhat.com>
2010-06-28 20:31:38 +00:00
Dave Wysochanski
a6b36a5901 Ensure in-memory state matches on-disk state of mda ignore bit.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
2010-06-28 20:31:18 +00:00
Dave Wysochanski
09e0f43ba0 Allow raw_read_mda_header to be called from text_label.c.
We'd like to pass in mda_header to vgname_from_mda().  In order to
do this, we need to call raw_read_mda_header() from text_label.c,
_text_read(), which gets called from the label_read() path, and
peers into the metadata and update vginfo cache.  We should check
the disable bit here, and if set, not peer into the vg metadata,
thus reducing the I/O to disk.

In the process, move vgname_from_mda() to layout.h, since the fn
only gets called from format_text code, and we need the mda_header
definition from the private layout.h.

Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
2010-06-28 20:31:01 +00:00
Dave Wysochanski
da0b4d8770 Move dev_open/dev_close outside vgname_from_mda().
Refactor vgname_from_mda() so caller must open/close the device.
Should be no functional change.

Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
2010-06-28 20:30:46 +00:00
Dave Wysochanski
96597c2eab Move dev_open / dev_close outside _vg_read_raw_area().
This refactoring moves the device open/close up one level to the caller of
_vg_read_raw_area().  Should be no functional change and facilitate future
changes related to metadata balancing.

Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
2010-06-28 20:30:30 +00:00
Dave Wysochanski
d144d5eeb7 Add text format specific 'rlocn' ignore flag and access functions.
Adding a flag to the 'rlocn' structure in the mda header of the
text format allows us to flip a bit to ignore an area on disk that
stores the metadata via the text format specific mda_header.
This patch defines the flag and access functions to manage the flag.
Other patches will manage the ignore on a format-independent basis,
by using a flag in the metadata_area structure.

Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
2010-06-28 20:29:57 +00:00
Dave Wysochanski
58f55600d0 Add device name to output of error messages in raw_read_mda_header().
It would be helpful if we had the device name when something like
a mda_header checksum error occurs.

Before:
./tools/lvm pvs -opv_name,vg_name,uuid,mda_count,pv_mda_count_ignored,vg_mda_count,vg_mda_count_ignored,vg_mda_copies
  Incorrect metadata area header checksum
  PV         VG      PV UUID                                #PMda #PMdaIgn #VMda #VMdaIgn #VMdaCps
  /dev/loop0 vgtest2 sVv26t-gjpb-Rcau-uBDO-Cx04-GbRR-6Ssq7e     2        0     4        0        4
  /dev/loop1 vgtest2 zXWStT-qE8F-mbkc-RfgH-aytv-mptF-Y5Ce09     2        0     4        0        4
  /dev/loop2         riCpK9-9G8r-LlIp-i2oh-mb3N-CUzk-u5YpuR     1        0     0        0        0
  /dev/loop3 vgtest  tQCUjm-rmyd-i92d-4eeE-UYBW-v1vQ-kRaA17     2        0     4        2        0
  /dev/loop4 vgtest  ZRvpeI-p8F1-ccVW-BBac-xhl1-aGXU-CbP0oo     2        2     4        2        0

After:
./tools/lvm pvs -opv_name,vg_name,uuid,mda_count,pv_mda_count_ignored,vg_mda_count,vg_mda_count_ignored,vg_mda_copies
  Incorrect metadata area header checksum on /dev/loop2 at offset 4096
  PV         VG      PV UUID                                #PMda #PMdaIgn #VMda #VMdaIgn #VMdaCps
  /dev/loop0 vgtest2 sVv26t-gjpb-Rcau-uBDO-Cx04-GbRR-6Ssq7e     2        0     4        0        4
  /dev/loop1 vgtest2 zXWStT-qE8F-mbkc-RfgH-aytv-mptF-Y5Ce09     2        0     4        0        4
  /dev/loop2         riCpK9-9G8r-LlIp-i2oh-mb3N-CUzk-u5YpuR     1        0     0        0        0
  /dev/loop3 vgtest  tQCUjm-rmyd-i92d-4eeE-UYBW-v1vQ-kRaA17     2        0     4        2        0
  /dev/loop4 vgtest  ZRvpeI-p8F1-ccVW-BBac-xhl1-aGXU-CbP0oo     2        2     4        2        0
2010-06-22 19:18:27 +00:00
Peter Rajnoha
03023d3965 Fix incorrect memory pool deallocation while using vg_read for files.
We create a separate pool "lvm2 vg_read" for vg_read and we don't use
cmd->mem anymore.
2010-06-01 12:08:50 +00:00
Peter Rajnoha
1e696b0c15 Do not reset position in metadata ring buffer on vgrename and vgcfgrestore.
We should write metadata into next position in the ring buffer while calling
vgrename and vgcfgrestore. At this code level (_vg_write_raw), we were not able
to determine if this is a rename or not. If yes, then accompanying VG structure
passed here has a new name set, not the old one.

When looking for a location where to put metadata next, we were given a NULL
value because of failed VG name comparison (in _find_vg_rlocn) between the
name in existing metadata and metadata we're just about to write.

This resets the position in the ring buffer, overwriting any existing metadata
(and also incorrectly updates the cache to "orphan" afterwards).

This patch just adds old_name item in struct volume_group that we can check and use
if necessary and detect renames at lower layers as well.

The same applies for vgcfgrestore, but here we're using a special value of
old_name, an empty string, to disable the check with existing metadata totally.
2010-04-14 13:09:16 +00:00
Alasdair Kergon
b1f9a2f5d1 Only do one full device scan during each read of text format metadata. 2010-03-16 17:30:00 +00:00
Alasdair Kergon
c97cbf8c08 pre-release 2010-02-15 23:53:15 +00:00
Dave Wysochanski
8caf272a93 Add copy constructor for struct metadata_area.
Clean up cut&paste code with proper copy constructor.
2010-02-02 16:26:34 +00:00
Zdenek Kabelac
b1ebf028de Cleanup returns for void functions. 2009-12-11 13:16:37 +00:00
Mike Snitzer
a2552d4f59 Switch status from 32-bit to 64-bit
The physical_volume, volume_group, logical_volume and lv_segment
structures' 'status' member is now uint64_t.

The alignment of these structures was also audited to remove holes.  The
movement of some members in 'volume_group' and 'lv_segment' eliminates
holes.  The 'physical_volume' structure still has one 4-byte hole after
'pe_size'; the other structures no longer have any holes.  Each
structures' size has not changed.
2009-11-24 22:55:55 +00:00
Mike Snitzer
57b660356e Add devices/data_alignment_offset_detection to lvm.conf.
If the pvcreate --dataalignmentoffset option is not specified the start
of a PV's aligned data area will be shifted by the associated
'alignment_offset' exposed in sysfs (unless
devices/data_alignment_offset_detection is disabled in lvm.conf).

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2009-08-01 17:07:36 +00:00
Mike Snitzer
9607eba5c2 Fix compile warnings from recently added log_very_verbose() in _text_pv_write() 2009-07-31 14:23:06 +00:00
Mike Snitzer
377b6a5843 Disable the "new pe_start policy"
Documented which use-cases force the reinstatement of the nuanced
handling of pe_start.  As soon as orphan PVs are eliminated much of this
will no longer be a concern ('preserve_pe_start' can be reenabled in
.pv_setup).

Added defensive 'if (pv->pe_align)' check in _text_pv_write()'s pe_start
loop.
2009-07-30 21:15:17 +00:00
Mike Snitzer
733bd656b2 Revert 'preserve_pe_start' related code in _text_pv_setup
If pv_setup was given a non-zero pe_start it would short-circuit
establishing a default pv->pe_align.  pv->pe_align=0 would result
in a divide by zero in _mda_setup().  'vgconvert -M2 $vgname' hit this.

.pv_write still properly preserves pe_start if it was supplied.
2009-07-30 18:40:22 +00:00
Mike Snitzer
04b2a4bdcf Add --dataalignmentoffset to pvcreate to shift start of aligned data area
Adds pe_align_offset to 'struct physical_volume'; is initialized with
set_pe_align_offset().  After pe_start is established pe_align_offset is
added to it.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2009-07-30 17:45:28 +00:00
Mike Snitzer
d01a37f597 Preserve pe_start in .pv_setup and .pv_write if pe_start was supplied.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2009-07-30 17:42:33 +00:00
Mike Snitzer
c8a4e489c1 Remove legacy support for preserving pe_start if a PV already has data
areas.

This preserved pe_start would quickly be readjusted to follow the first
mda anyway.  An example use-case that hit this code path is: running
pvcreate on an already existing PV _without_ a preceeding pvremove.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2009-07-30 17:41:01 +00:00
Mike Snitzer
ad273af9c7 Fix _mda_setup() to not check first mda's size before pe_align rounding.
Without this fix rounding the end of the first mda to a pe_align
boundary could silently exceed the disk_size.

Final 'if (start1 + mda_size1 > disk_size)' block serves as a safety
net.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2009-07-30 17:19:31 +00:00
Mike Snitzer
2143b169b1 Formalize pe_start policy as split between .pv_setup and .pv_write.
Document existing pe_start policy.
Fix issue in _text_pv_setup() where existing pe_start case could have
the pv->pe_start set to pv->pe_align even though pe_start shouldn't ever
change.

vgconvert and pvcreate have a facility to preserve the existing start
of the on-disk data extents, known as pe_start.
They indicate this by passing the existing value to the pvsetup function
which must preserve it.

This patch avoids one particular case where the value could get
changed incorrectly now that the alignment settings are configurable.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2009-07-30 17:18:03 +00:00
Alasdair Kergon
b8f47d5f69 Use log_error macro consistently throughout in place of log_err. 2009-07-15 20:02:46 +00:00
Milan Broz
5c93cdba2d Fix PV datalign when for values starting prior to MDA area.
The dataalign value must always be aligned according
to MDA area.
The currect code checks if calculated value collides with
MDA area but not if the value is so small that it is
located before MDA starts.

Unfortunatelly there can be also MDA in the end of the device.

The patch adds simple check to avoid this miscalculation.
Patch expects that first MDA always starts on <= pagesize boundary
(this is true for all allowed label sector parameters).
2009-05-07 12:11:50 +00:00
Takahiro Yasui
1d13e51826 Fix error message when adding metadata directory to internal list fails.
Author: Takahiro Yasui <tyasui@redhat.com>
2009-03-23 21:13:37 +00:00
Milan Broz
c3b50730b8 vgname_from_mda now tries to parse for vgname even
if rlocn not defined (there is no metadata area).

In most cases it fails in validate_name(),
unfortunately there are situatuions, when
validate_name is ok and later code fails with
checksum error.

Reproducer:

# dd if=/dev/zero of=/dev/loop0

# pvcreate --metadatasize 637k /dev/loop0
  Physical volume "/dev/loop0" successfully created

# pvs /dev/loop0
  /dev/loop0: Checksum error
      PV         VG   Fmt  Attr PSize PFree
        /dev/loop0      lvm2 --   1.00M 1.00M

Signed-off-by: Milan Broz <mbroz@redhat.com>

-
2009-03-03 16:35:32 +00:00
Milan Broz
7b1c853bd9 Try to avoid full rescan if label scan is enough. 2009-02-25 23:29:06 +00:00
Alasdair Kergon
8929ce6651 Add --dataalignment to pvcreate to specify alignment of data area. (mbroz)
This patch is not fully tested and leaves some related bugs unfixed.

Intended behaviour of the code now:

  pe_start in the lvm2 format PV label header is set only by pvcreate (or
vgconvert -M2) and then preserved in *all* operations thereafter.

  In some specialist cases, after the PV is added to a VG, the pe_start
field in the VG metadata may hold a different value and if so, it
overrides the other one for as long as the PV is in such a VG.

  Currently, the field storing the size of the data area in the PV label
header always holds 0.  As it only has meaning in the context of a
volume group, it is calculated whenever the PV is added to a VG (and can
be derived from extent_size and pe_count in the VG metadata).
2009-02-22 19:00:26 +00:00
Dave Wysochanski
e9f57f2beb Add pv_mda_size to 'pvs' and vg_mda_size to 'vgs'.
Reports the size of the smallest metadata area in a PV or a VG.
Useful to confirm pvcreate --metadatasize or pvmetadatasize setting in
/etc/lvm/lvm.conf file.

NOTE: Actual value in these fields will most always differ from that
given in pvcreate options due to rounding and alignment effects.
2009-01-09 22:44:33 +00:00
Dave Wysochanski
d17a8e365d Make _init_rand() thread safe - use rand_r() instead of rand().
Use good entropy for seed value if possible.
2008-12-07 04:27:56 +00:00
Alasdair Kergon
2c44337bd5 Right, a simple build (without options) is working again. 2008-11-03 22:14:30 +00:00
Alasdair Kergon
08b959a50b Avoid overwriting in-use on-disk text metadata by forgetting MDA_HEADER_SIZE. (Edward Allcutt) 2008-10-17 00:55:46 +00:00
Alasdair Kergon
7eb1c3ed92 Free text metadata buffer after a failure writing it. 2008-09-30 20:37:52 +00:00
Alasdair Kergon
a77f5bf258 Pass struct physical_volume to pe_align. 2008-09-19 04:28:58 +00:00
Milan Broz
a4a1cd76ba Fix allocation bug in text metadata format write error path.
Function _text_pv_write doesn't use memory pool but static buffer,
call dm_pool_free in error path in _raw_write_mda_header is wrong.

Move pool free only to path where is the memory pool used.
2008-08-16 09:46:55 +00:00
Alasdair Kergon
131bc6f091 Avoid looping forever in _pv_analyze_mda_raw used by pvck. 2008-07-31 13:07:01 +00:00
Alasdair Kergon
29f7cbdabf Refactor _text_pv_read and always return mda list if requested. 2008-07-31 10:50:18 +00:00
Dave Wysochanski
d2edd6ac07 Add pvcreate sanity tests, check for label_write() failure in _text_pv_write().
Failure to check for label_write() return code caused the following test
to indicate it passed when it really failed:
pvcreate rejects labelsector > 1000000000000
2008-07-16 21:32:38 +00:00
Alasdair Kergon
7284f3f966 preparation for vg cache 2008-03-17 16:51:31 +00:00
Alasdair Kergon
bb097a97ea split orphan VG by format type 2008-02-06 15:47:28 +00:00
Alasdair Kergon
67cdbd7e4d Some whitespace tidy-ups. 2008-01-30 14:00:02 +00:00
Alasdair Kergon
c51b9fff19 Use stack return macros throughout. 2008-01-30 13:19:47 +00:00
Alasdair Kergon
962b2a559d Rely upon internally-cached PV labels while corresponding VG lock is held. 2008-01-29 23:45:48 +00:00
Alasdair Kergon
00a7c302ea Add pv_mda_free and vg_mda_free fields to reports for raw text format. 2007-11-05 17:17:55 +00:00
Bryn M. Reeves
8b98c12815 Add is_orphan_vg() and change all hardcoded checks to use it. 2007-11-02 13:06:42 +00:00
Dave Wysochanski
1b8de4cb25 Add pv_dev_name() to access PV device name.
Patch by Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
2007-10-12 14:29:32 +00:00
Alasdair Kergon
21bc366486 Clean up numerous compiler warnings that crept in recently.
Remove several unused parameters from _allocate().
2007-08-22 14:38:18 +00:00
Alasdair Kergon
be6845999b Fix inconsistent licence notices: executables are GPLv2; libraries LGPLv2.1. 2007-08-20 20:55:30 +00:00
Jim Meyering
e5e120a502 For consistency, rename local variable: s/newname/new_name/g. 2007-08-06 14:57:48 +00:00
Jim Meyering
941e4f5567 Remove create_dir function; use now-equivalent dm_create_dir instead.
* lib/misc/lvm-file.c (_create_dir_recursive, create_dir): Remove functions.
* lib/misc/lvm-file.h (create_dir): Remove declaration.
* lib/commands/toolcontext.c (create_toolcontext): s/create_dir/dm_create_dir/
* lib/format_text/archiver.c (archive, backup): Likewise.
* lib/format_text/format-text.c (_add_dir): Likewise.
* lib/locking/file_locking.c (init_file_locking): Likewise.
Patch by Jun'ichi Nomura.
2007-07-28 12:26:21 +00:00
Jim Meyering
1a5d6bd23d Detect stream write failure reliably; new fn: lvm_fclose; use dm_fclose
* lib/misc/lvm-file.c (lvm_fclose): New function.
* lib/misc/lvm-file.h (lvm_fclose): Declare it.
* lib/config/config.c (write_config_file): Use the new function to detect
and diagnose unlikely write failure.
* lib/filters/filter-persistent.c (persistent_filter_dump): Likewise.
* lib/format_text/archive.c (archive_vg): Likewise.
* lib/format_text/format-text.c (_vg_write_file): Likewise.
* lib/log/log.c (fin_log): Similar, but use dm_fclose directly.
Include "\n" at end of each fprintf format string.
2007-07-24 17:48:08 +00:00
Dave Wysochanski
13835b5f6c Don't use index and rindex functions marked by SUSv3 as legacy - Jakub Bogusz <qboosh@pld-linux.org> 2007-07-02 11:17:21 +00:00
Petr Rockai
e7ddf4168d Make warnings go to stderr. Change log_warn to that effect, log_print
continues to send messages to stdout.
2007-06-28 17:33:44 +00:00
Dave Wysochanski
28d1c4d7e2 Update pvck to include text metadata area and record detection.
--
2007-04-25 21:10:55 +00:00
Dave Wysochanski
17a6fc0b45 Add 'scan_sector' parameter to label_read and _find_labeller to add
flexibility in searching for disk labels.
2007-04-23 18:21:01 +00:00