IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Before initiation fifo communication, check whether there is
running dmeventd - in case there is no running instance, this
would be just blocked for 5 seconds trying to open fifo.
Fix cutting away 1 character via incorrect usage of dm_strncpy
introduced in last batch of commits and use sizeof(buffer) to
get proper sizes.
In case of use strcpy_name_len() the replacement was invalid,
so we need to restore this case since sanlock uses buffer without
nul ending, so we would strip one more character from the buffer.
Also start to use dm_strncpy() without (void) for unchecked usage.
Add a global timeout value to be used for the threads to end waiting for
whatever it is they are blocked on. The values varied from 2-5 seconds,
which is way longer than needed. Value of 0.5 shows no CPU load when
service is running and is idle.
When exit on file is present in a system and term/break signal is
catched, them dmeventd is no longger refusing to exit.
For the correct shutdown, there should be ideally unmonitoring call,
however in some case it's very hard to implement this correct procedure.
With this 'exit on' file dmeventd at least avoid 'blocking' shutdown,
before systemd kills use with -9 anyway possibly even in some unwanted
stated of internal dmeventd processing (i.e. in the middle of some lvm
command processing).
To quickly get info about some internal dmeventd status,
implment 'dmeventd -i' support.
Reported messages are some 'raw' internal informations mainly
useful to developers.
Instead of just exiting in the middle of monitoring,
unregisted all monitored devices first and then exit.
To speedup this path, all send internal SIGINT when thread
unregiters itself, to wakup-up main sleeping loop.
If we want to have const structure - use a const pointer to avoid,
however making individual members const make it only assingle
in construct time and we already violate this logic since
we memcpy into the structure - so drop these unnecessary consts...
syscall 186 is specific to x86 64bit. As this is different from arch
to arch and between same arch different arch size we will only grab
thread ID using built-in python support if it is supported.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2166931
When the daemon is starting we do an initial fetch of lvm state. If we
happened to get some type of failure with lvm during this time we would
exit. During error injection testing this happened enough that
the unit tests were unable to finish. Add retries to ensure we can get
started during error injection testing.
When we sort the LVs, we can stumble on a missing key, protect against
this as well.
Seen in error injection testing:
Traceback (most recent call last):
File "/home/tasleson/projects/lvm2/daemons/lvmdbusd/fetch.py", line 198, in update_thread
num_changes = load(*_load_args(queued_requests))
File "/home/tasleson/projects/lvm2/daemons/lvmdbusd/fetch.py", line 83, in load
rc = MThreadRunner(_main_thread_load, refresh, emit_signal).done()
File "/home/tasleson/projects/lvm2/daemons/lvmdbusd/utils.py", line 726, in done
raise self.exception
File "/home/tasleson/projects/lvm2/daemons/lvmdbusd/utils.py", line 732, in _run
self.rc = self.f(*self.args)
File "/home/tasleson/projects/lvm2/daemons/lvmdbusd/fetch.py", line 40, in _main_thread_load
(lv_changes, remove) = load_lvs(
File "/home/tasleson/projects/lvm2/daemons/lvmdbusd/lv.py", line 148, in load_lvs
return common(
File "/home/tasleson/projects/lvm2/daemons/lvmdbusd/loader.py", line 37, in common
objects = retrieve(search_keys, cache_refresh=False)
File "/home/tasleson/projects/lvm2/daemons/lvmdbusd/lv.py", line 72, in lvs_state_retrieve
lvs = sorted(cfg.db.fetch_lvs(selection), key=get_key)
File "/home/tasleson/projects/lvm2/daemons/lvmdbusd/lv.py", line 35, in get_key
pool = i['pool_lv']
KeyError: 'pool_lv'
There is a window of time where the following can occur.
1. An API request is in process to the lvm shell, we have written some
command to the lvm shell and we are blocked on that thread waiting
2. A signal arrives to the daemon which causes us to exit. The signal
handling code path goes directly to the lvm shell and writes
"exit\n". This causes the lvm shell to simply exit.
3. The thread that was waiting for a response gets an EIO as the child
process has exited. This bubbles up a failure.
This is addressed by placing a lock in the lvm shell to prevent
concurrent access to the shell. We also gather additional debug data
when we get an error in the lvm shell read path. This should help if
the lvm shell exits/crashes on its own.
Check for pkg-config --libs libdlm_lt and test if the returned value
contains word 'pthread' - if so, it's likely a buggy result from
incorrect config file and use directly -ldlm_lt for this case.
Convert lvmlockd to use configure _LIBS and _CFLAGS for
discovered libraries.
TODO: ATM we ignore discovered libdlm and use libdlm_lt instead.
Also libseagate_ilm is hard to find unicorn for testing.
Convert naming SYSTEMD_CFLAGS/LIB -> LIBSYSTEMD_CFLAGS/LIBS
to better fit library check for libsystemd.
Build lvmlockd with SD_NOTIFY when we have defined LIBSYSTEMD_LIBS.
Keep the conversion 64bit as on x32 arch time_t is 64bit value
and we may loose precision (y2038).
TODO: like use universal string for time printing as in log/log.c
_set_time_prefix()
We can't assume that strerror_r returns char* just because _GNU_SOURCE is
defined. We already call the appropriate autoconf test, so let's use its
result (STRERROR_R_CHAR_P).
Note that in configure, _GNU_SOURCE is always set, but we add a defined
guard just in case for futureproofing.
Bug: https://bugs.gentoo.org/869404
Previously we utilized udev until we got a dbus notification from lvm
command line tools. This however misses the case where something outside
of lvm clears the signatures on a block device and we fail to refresh the
state of the daemon. Change the behavior so we always monitor udev events,
but ignore those udev events that pertain to lvm members.
Note: --udev command line option no longer does anything and simply
outputs a message that it's no longer used.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1967171
If lvmlockd in cluster is killed accidently or any other reason, the
lock resources will become orphaned in the VG lockspace. When the
cluster manager tries to restart this daemon, the LVs will probably
become inactive because of resource schedule policy and thus the lock
resouce will be omited during the adoption process. This patch will
try to purge the lock resources left in previous lockspace, so the
following actions can work again.
Previously when the __del__ method ran on LVMShellProxy we would blindly
call terminate(). This was a race condition as the underlying process
may/maynot be present. When the process is still present the SIGTERM will
end up being seen by lvmdbusd too. Re-work the code so that we
first try to wait for the child process to exit and only then if it hasn't
exited will we send it a SIGTERM. We also ensure that when this is
executed we will briefly ignore a SIGTERM that arrives for the daemon.
When checking to see if the PV is missing we incorrectly checked that the
path_create was equal to PV creation. However, there are cases where we
are doing a lookup where the path_create == None. In this case, we would
fail to set lvm_id == None which caused a problem as we had more than 1
PV that was missing. When this occurred, the second lookup matched the
first missing PV that was added to the object manager. This resulted in
the following:
Traceback (most recent call last):
File "/usr/lib/python3.9/site-packages/lvmdbusd/utils.py", line 667, in _run
self.rc = self.f(*self.args)
File "/usr/lib/python3.9/site-packages/lvmdbusd/fetch.py", line 25, in _main_thread_load
(changes, remove) = load_pvs(
File "/usr/lib/python3.9/site-packages/lvmdbusd/pv.py", line 46, in load_pvs
return common(
File "/usr/lib/python3.9/site-packages/lvmdbusd/loader.py", line 55, in common
del existing_paths[dbus_object.dbus_object_path()]
Because we expect to find the object in existing_paths if we found it in
the lookup.
resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2085078
Latest upstream build of lvm results in the following error when
trying to use lvmshell.
"Argument --reportformat cannot be used in interactive mode.,
Error during parsing of command line."
When lvm is compiled with editline, if the file descriptors don't look like
a tty, then no "lvm> " prompt is done. Having lvm output the shell prompt
when consuming JSON on a report file descriptor is very useful in
determining if lvm command is complete.
Historically we have seen a few different errors which occur when we call
fullreport. Failing exit code and JSON which is missing one or more keys.
Instruct lvm to dump the debug to a file during fullreport calls when we
fork & exec lvm. If we encounter an error, ouput the debug data.
The reason this isn't being done when lvmshell is used is because we
don't have an easy way to test the error paths.
This change is complicated by the following:
1. We don't know if fullreport was good until we evaluate all the JSON.
This is done a bit after we have called into lvm and returned.
2. We don't want to orphan the debug file used by lvm if the daemon is
killed. Thus we try to minimize the window where the debug file hasn't
already been unlinked. A RFE to pass an open FD to lvm for this
purpose is outstanding.
The temp. file is:
-rw------. 1 root root /tmp/lvmdbusd.lvm.debug.XXXXXXXX.log
Introduce an exception which is used for known existing issues with lvm.
This is used to distinguish between errors between lvm itself and lvmdbusd.
In the case of lvm bugs, when we simply retry the operation we will log
very little. Otherwise, we will dump a full traceback for investigation
when we do the retry.
Instead of lumping all the exceptions, break them out to handle the dbus
exceptions separately, to reduce the amount of debug information that ends
up in the journal that has questionable value.
Lvm occasionally fails to return all the request JSON keys in the output of
"fullreport". This happens very rarely. When it does the daemon was reporting
the resulting informational exception:
MThreadRunner: exception
Traceback (most recent call last):
File "/usr/lib/python3.9/site-packages/lvmdbusd/utils.py", line 667, in _run
self.rc = self.f(*self.args)
File "/usr/lib/python3.9/site-packages/lvmdbusd/fetch.py", line 40, in _main_thread_load
(lv_changes, remove) = load_lvs(
File "/usr/lib/python3.9/site-packages/lvmdbusd/lv.py", line 143, in load_lvs
return common(
File "/usr/lib/python3.9/site-packages/lvmdbusd/loader.py", line 37, in common
objects = retrieve(search_keys, cache_refresh=False)
File "/usr/lib/python3.9/site-packages/lvmdbusd/lv.py", line 95, in lvs_state_retrieve
l['vdo_operating_mode'],
KeyError: 'vdo_operating_mode'
The daemon retries the operation, which usually works and the daemon continues.
However, simply reporting this informational stack trace is causing CI and other
automated tests to fail as they expect no tracebacks in the log output.
Remove the reporting of this code path unless it persists and causes the daemon
to give up and exit.
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=2120267
When the daemon isn't started with --debug we will keep a circular
buffer of the past N number of debug messages which we will output
when we encounter an issue.
Rather than trying to bubble up return codes that get us to exit cleanly
it's better to just raise an exception to bail. In some cases functions
don't have return codes, so they cannot be checked.
We were incorrectly only setting this if --udev wasn't present on the
command line. In all cases when we see a manager.ExternalEvent we want
to set this.
