IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Option --all is only partially documented currently, so document in all
commands. Also make {pv|vg|lv}{display|s} man pages consistent with help
output. Remove ununsed 'disk_ARG' parameter. Leave --trustcache out of
the man page output. Update --units argument to show all possible units.
Going forward, we would like to allow users to specify the total
number of metadatacopies in a VG rather than on a per-PV basis. In
order to facilitate that, introduce --pvmetadatacopes to replace
--metadatacopies everywhere. We still allow --metadatacopies for
pv commands, but require --pvmetadatacopies for vg commands.
Eventually we will introduce --vgmetadatacopies. Once we do that,
we should either deprecate --metadatacopies or make it a synonym based
on the command (pvmetadatacopies for pv commands, and vgmetadatacopies
for vg commands). The latter option would likely just require a simple
'strncpy' check against cmd->command->name to qualify the merge_synonym
call.
Update nightly tests to cover the pvmetadatacopies synonym.
Note that this patch is the result of an eariler review comment for
the implicit pvcreate patches. Should apply cleanly on top of the
implicit pvcreate patches (I applied after patch 10/10 in that series).
NOTE: This patch will require --pvmetadatacopies for vgconvert as
--metadatacopies is no longer accepted.
vgcreate and vgextend now implicitly call pvcreate on devices not
currently initialized for LVM use. Previously these commands would
fail with an error, so clarify the new behavior in the man page.
Slight functional change. If we open the destination first, we cannot
know the 'fmt'. In this case we use the default metadata type unless
the user has specified -M on the cmdline. If not, in most cases this
is fine since we use the LVM2 default metadata type. However, if the
user is specifying a non-default metadata type (e.g. lvm1) and the order
of the names is such that we have to open the destination (vg_to) first,
we have a problem. So in this case, we require the use of -M and vgsplit
will fail with an error if not. I've updated the man page to recommend
the usage of -M in this case.
Author: Dave Wysochanski <dwysocha@redhat.com>
Adds 'data_alignment_detection' config option to the devices section of
lvm.conf. If your kernel provides topology information in sysfs (linux
>= 2.6.31) for the Physical Volume, the start of data area will be
aligned on a multiple of the ’minimum_io_size’ or ’optimal_io_size’
exposed in sysfs.
minimum_io_size is used if optimal_io_size is undefined (0). If both
md_chunk_alignment and data_alignment_detection are enabled the result
of data_alignment_detection is used.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If the pvcreate --dataalignmentoffset option is not specified the start
of a PV's aligned data area will be shifted by the associated
'alignment_offset' exposed in sysfs (unless
devices/data_alignment_offset_detection is disabled in lvm.conf).
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Adds pe_align_offset to 'struct physical_volume'; is initialized with
set_pe_align_offset(). After pe_start is established pe_align_offset is
added to it.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Update units_to_bytes() to support (S)ectors: 500 bytes.
- 500 byte (S)ectors is of questionable value but it adds to consistency
if a user happens to use --units S. This seems better than an error.
Updated test/t-covercmd.sh to test --units [hS]
Document the units that can be displayed via --units uniformly.
- (p)etabytes and (e)xabytes were missing in pvs, vgs and lvs man pages.
Made lvreduce man page "... in units of megabytes." consistent (with the
lvextend and lvresize man pages).
http://bugzilla.redhat.com/show_bug.cgi?id=500861
- Update list of fields/columns for each command (a few missing).
- Update list order to match "-o help" output (easier to verify field list)
- Add "{pv|vg|lv}_all" description.
- Move "-o help" sentence above column/field list.
New sample man page for lvs (pvs and vgs are similar):
-o, --options
Comma-separated ordered list of columns. Precede the list with ’+’ to append to the
default selection of columns instead of replacing it.
Use -o lv_all to select all logical volume columns, and -o seg_all to select all logical
segment columns.
Use -o help to view the full list of columns available.
Column names include: lv_uuid, lv_name, lv_attr, lv_major, lv_minor, lv_read_ahead,
lv_kernel_major, lv_kernel_minor, lv_kernel_read_ahead, lv_size, seg_count, origin, ori-
gin_size, snap_percent, copy_percent, move_pv, convert_lv, lv_tags, mirror_log, modules,
segtype, stripes, stripesize, regionsize, chunksize, seg_start, seg_start_pe, seg_size,
seg_tags, seg_pe_ranges, devices.
With --segments, any "seg_" prefixes are optional; otherwise any "lv_" prefixes are
optional. Columns mentioned in vgs (8) can also be chosen.
The lv_attr bits are:
Buildsystem support device-mapper only install,
but generic install tagret includes both dm+lvm2.
For distribution which uses separate install_device-mapper,
there is no way how to install lvm2 only
(so after installing lvm2 for packaging purposes
built system must remove installed device-mapper files).
Fix it by allowing lvm2_install target, similarily like
install_cluster for clvmd.
(install = install_device-mapper + install_lvm2)
Add lvs origin_size field.
Fix linux configure --enable-debug to exclude -O2.
Still a few rough edges, but hopefully usable now:
lvcreate -s vg1 -L 100M --virtualoriginsize 1T
This patch is not fully tested and leaves some related bugs unfixed.
Intended behaviour of the code now:
pe_start in the lvm2 format PV label header is set only by pvcreate (or
vgconvert -M2) and then preserved in *all* operations thereafter.
In some specialist cases, after the PV is added to a VG, the pe_start
field in the VG metadata may hold a different value and if so, it
overrides the other one for as long as the PV is in such a VG.
Currently, the field storing the size of the data area in the PV label
header always holds 0. As it only has meaning in the context of a
volume group, it is calculated whenever the PV is added to a VG (and can
be derived from extent_size and pe_count in the VG metadata).
Reports the size of the smallest metadata area in a PV or a VG.
Useful to confirm pvcreate --metadatasize or pvmetadatasize setting in
/etc/lvm/lvm.conf file.
NOTE: Actual value in these fields will most always differ from that
given in pvcreate options due to rounding and alignment effects.
Prior to this patch, "lvremove -f vgname" would fail if vgname contained
one or more snapshot LVs. Now this passes, but has a side-effect.
If you issue "lvremove vgname" where vgname contains one or more snaps,
you will get an extra "y/n" prompt to remove the same snapshot.
Example:
$ lvs
LV VG Attr LSize Origin Snap% Move Log Copy% Convert
lvsnap vgtest swi-a- 16.00M lvtest 0.05
lvtest vgtest owi-a- 64.00M
$ lvremove vgtest
Do you really want to remove active logical volume "lvsnap"? [y/n]: n
Logical volume "lvsnap" not removed
Do you really want to remove active logical volume "lvsnap"? [y/n]: n
Logical volume "lvsnap" not removed
Command failed with status code 5.
Fixing this will most likely require modification of the iterator
function, process_each_lvs_in_vg() to iterate over snaps in some
cases (e.g. lvs, vgdisplay -v) but not in others (lvremove).
* dmsetup/dmsetup.c (DEV_PATH): Remove definition.
(parse_loop_device_name): Add parameter: dev_dir.
Declare the "dev" parameter to be "const".
Use dev_dir, not DEV_PATH. Handle the case in which dev_dir
does not end in a "/".
(_get_abspath): Declare "path" parameter "const", to match.
(_process_losetup_switches): Add parameter: dev_dir.
Pass dev_dir to parse_loop_device_name.
(_process_switches): Add parameter: dev_dir.
Pass dev_dir to _process_losetup_switches.
(main): Set dev_dir from the DM_DEV_DIR envvar, else to "/dev".
Call dm_set_dev_dir.
* lib/libdm-common.c (dm_set_dev_dir): Rewrite to be careful
about boundary conditions, now that dev_dir may be tainted.
* man/dmsetup.8: Mention $DM_DEV_DIR.
Author: Jim Meyering <meyering@redhat.com>
log type. Previously, we had a '--corelog' argument that
would change the default type from 'disk' to 'core'. I
think that creates too much confusion - especially when
doing conversions on mirrors.
The new argument '--log' takes either "disk" or "core"
as a parameter. This could be expanded in the future
for additional logging types as well.
Examples:
# Creating a 2-way mirror
$> lvcreate -m1 ... # implicitly use default disk logging
$> lvcreate -m1 --log disk ... # explicit disk logging
$> lvcreate -m1 --log core ... # specify core logging
$> lvcreate -m1 --corelog ... # old way still works
# Conversion examples
$> lvconvert --log core ... # convert to core logging
$> lvconvert --log disk ... # convert to disk logging
$> lvconvert -mX --corelog ... # old way still works
$> lvconvert -mX ... # old way of converting to disk logging still works
Changes are reflected in the man pages.
e.g. lvcreate -l 100%FREE to create an LV using all available space.
lvextend -l 50%LV to increase an LV by 50% of its existing size.
lvcreate -l 20%VG to create an LV using 20% of the total VG size.
onto a new device). uuid specified must not already exist on the system.
o More message tidying.
o When checking for label, only read PV metadata.
o Add ataraid. [Needs moving into config/defaults files.]
