IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The conditional is not just unnecessary, it would have been wrong. The code
is suppose to be checking if the 'splitmirrors_ARG' is negative, but it
instead is checking 'mirrors_ARG'. Rather than changing the argument being
checked, I've pulled the check entirely because 'splitmirrors_ARG' is already
guarenteed to not be negative by virtue of the fact that it is a 'int_arg'.
Negative values will be caught in _process_command_line().
We've used udev fallback code till now to check whether udev
created/removed the entries in /dev correctly and if not,
a repair was done (giving a warning messagea about that).
This patch adds a possibility to enable this additional check
and subsequent fallback only when required (debugging purposes
mostly) and trust udev completely.
So let's disable the fallback code by default and add a new
configuration option "activation/udev_fallback".
(The original code for creating the nodes will still be used
in case the device directory that is set in lvm.conf differs
from the one that udev uses and also when activation/udev_rules
is set to 0 - otherwise we would end up with no nodes/symlinks
at all)
are affected by the move. (Currently it's possible for I/O to become
trapped between suspended devices amongst other problems.
The current fix was selected so as to minimise the testing surface. I
hope eventually to replace it with a cleaner one that extends the
deptree code.
Some lvconvert scenarios still suffer from related problems.
Patch adds check for stripe not only in direct
LV segment but also in mirror image segment.
This prevents bugs like:
# lvcreate -i2 -l10 -n lv vg_test
# lvconvert -m1 -i1 vg_test/lv
# lvreduce -f -l1 vg_test/lv
WARNING: Reducing active logical volume to 4.00 MiB
THIS MAY DESTROY YOUR DATA (filesystem etc.)
Reducing logical volume lv to 4.00 MiB
Segment extent reduction 9 not divisible by #stripes 2
Logical volume lv successfully resized
# lvremove -f vg_test
Segment extent reduction 1 not divisible by #stripes 2
LV segment lv:0-4294967295 is incorrectly listed as being used by LV lv_mimage_0
Internal error: LV segments corrupted in lv_mimage_0.
We should never remove more extents than requested by user,
so round up to next stripe boundary during lvreduce.
Also this fixes round to zero sized LV bug:
# lvcreate -i2 -I 64k -l10 -n lvs vg_test
# lvreduce -f -l1 vg_test/lvs
Rounding size (1 extents) down to stripe boundary size for segment (0 extents)
WARNING: Reducing active logical volume to 0
THIS MAY DESTROY YOUR DATA (filesystem etc.)
Reducing logical volume lvs to 0
Failed to suspend lvs
Before, we used vg_write_lock_held call to determnine the way a device is
opened. Unfortunately, this opened many devices in RW mode when it was not
really necessary. With the OPTIONS+="watch" rule used in the udev rules,
this could fire numerous events while closing such devices (and it caused
useless scans from within udev rules in return).
A common bug we hit with this was with the lvremove command which was unable
to remove the LV since it was being opened from within the udev rules. This
patch should minimize such situations (at least with respect to LVM handling
of devices).
Though there's still a possibility someone will open a device 'outside' in
parallel and fire the event based on the watch rule when closing a device
once opened for RW.
allocates these buffers in such way it adds memory page for each such buffer
and size of unlock memory check will mismatch by 1 or 2 pages.
This happens when we print or read lines without '\n' so these buffers are
used. To avoid this extra allocation, use setvbuf to set these bufffers ahead.
Signed-off-by: Zdenek Kabelac <zkabelac@redhat.com>
Reviewed-by: Milan Broz <mbroz@redhat.com>
Reviewed-by: Petr Rockai <prockai@redhat.com>
Also, add a new 'obtain_device_list_from_udev' setting to lvm.conf with which
we can turn this feature on or off if needed.
If set, the cache of block device nodes with all associated symlinks
will be constructed out of the existing udev database content.
This avoids using and opening any inapplicable non-block devices or
subdirectories found in the device directory. This setting is applied
to udev-managed device directory only, other directories will be scanned
fully. LVM2 needs to be compiled with udev support for this setting to
take effect. N.B. Any device node or symlink not managed by udev in
udev directory will be ignored with this setting on.
allows us to allocate all images of a mirror (or RAID array) at one
time during create.
The current mirror implementation still requires a separate allocation
for the log, however.
As now the FID management is more complex, the code inside free_vg needs
to access some parts of memory pools which were not needed before.
For this - makes the order of unlock_and_free_vg() unconditional.
Keek using unlock_and_free_vg() API function.
For properly working VG locking mechanism only the alphabeting locking
orderer needs to be preserved.
TODO: there could be few more code parts simplified when we 'officially'
support of referencies between different memory pools.
With recent update of dm_report_field_string() API call to accept
completely const objects - we no longer need loose constness here
and keep it forwarding.
When I see 'seg_is_mirrored', I expect the argument to be an lv_segment.
In this case, it is lvcreate_params. Both structures, have a 'segtype'
entry which the macro dereferences. However, it just seems easier to
understand if we do 'segtype_is_mirrored' instead.
Since format instances will use own memory pool, it's necessary to properly
deallocate it. For now, only fid is deallocated. The PV structure itself
still uses cmd mempool mostly, but anytime we'd like to add a mempool
in the struct physical_volume, we can just rename this fn to free_pv and
add the code (like we have free_vg fn for VGs).
While STRIPE_SIZE_LIMIT * 2 is basically UINT_MAX, 32bit integer
value can already overflow durin arg size parsing.
(This really happens in test where --stripesize 4294967291 is used,
in s390x uint overflow and this test is ineffective.)
We allow writing non-orphan PVs only for resize now. The "orphan PV" assert
in pv_write fn uses the "allow_non_orphan" parameter to control this assert.
However, we should find a more elaborate solution so we can remove this
restriction altogether (pv_write together with vg_write is not atomic, we
need to find a safe mechanism so there's an easy revert possible in case of
an error).
Fixing some const warnings - with API change in:
int vg_extend(struct volume_group *vg, int pv_count, const char *const *pv_names,
Change is needed - as lvm2api expects const behaviour here.
So vg_extend() is doing local strdup for unescaping.
skip_dev_dir return const char* from const char* vg_name.
Rest of the patch is cleanup of related warnings.
Also using dm_report_filed_string() API change to simplify
casting in _string_disp and _lvname_disp.
Add configurable option to define minimal size of
of block device usable as a PV.
pv_min_size() is added to lvm-globals and it's being
initialized through _process_config.
Macro PV_MIN_SIZE is unused and removed.
New define DEFAULT_PV_MIN_SIZE_KB is added to lvm-global
and unlike PV_MIN_SIZE it uses KB units.
Should help users with various slow devices attached to the system,
which cannot be easily filtered out (like FDD on /dev/sdX):
https://bugzilla.redhat.com/show_bug.cgi?id=644578
Make configurable default behaviour how to deal with device node creates.
With udev system natural options should be 'resume'.
For older systems where user expect there is node in /dev/mapper immediately
after dmsetup create --notable - use 'create'
FIXME:
Code needs fixing passing this flag through udev cookie.
activated.
In order to achieve this, we need to be able to query whether
the origin is active exclusively (a condition of being able to
add an exclusive snapshot).
Once we are able to query the exclusive activation of an LV, we
can safely create/activate the snapshot.
A change to 'hold_lock' was also made so that a request to aquire
a WRITE lock did not replace an EX lock, which is already a form
of write lock.
Add new function dm_task_set_add_node() to select between 2 types
of node creation in device directory.
DM_ADD_NODE_ON_RESUME is now default and ensures node is created on
resume. Old original behavior is accessible with DM_ADD_NODE_ON_CREATE.
In this case node would be created during dmsetup create --notable.
For the user 2 new options for dmsetup create are added:
[{--addnodeonresume | --addnodeoncreate }]
Properly working node creation on resume is needed for proper operation
stacking and ability to correctly check in which state the device should
after whole udev transation.
As sync_local_dev_names() cannot be called within activation context,
add new parametr which allows to select if the sync call is needed
before executing new command.
a mirror image (or removing a log while adding a mirror). Advise the
user to use two separate commands instead.
This issue become especially problematic when PVs are specified, as they
tend to mean different things when adding vs removing. In a command that
mixes adding and removing, it is impossible to decern exactly what the
user wants.
This change prevents bug 603912.
Patch adds extra check for lv_name not being NULL.
Test avoids unneeded strlen call for this case.
Otherwise there is no functional change as test would fail on
size_t comparation even for NULL lv_name (thus there is no risk
of NULL dereference when taking 'true' if branch.
Add test for NULL before passing uuid as src argument to memcpy.
As memcpy function is declared as function not accepting NULL.
Though we pass NULL only with zero length so this patch presents
no functional change to the code.
was lacking the (vgmem) pool. We now create that pool. There is at least one
more such VG (_dummy_vg) which is pool-less. I am not sure what is the right
way to go about this, but this is currently necessary to fix a segfault
introduced by using vgmem in the reporter in Dave's lvseg lvm2app patches.
Signed-off-by: Petr Rockai <prockai@redhat.com>
Patch updates exec_cmd() and adds 3rd parameter with pointer for
status value, so caller might examine returned status code.
If the passed pointer is NULL, behavior is unmodified.
Patch allows to confinue with lvresize if the failure from fsadm check is
caused by mounted filesystem as many of filesystem resize tools do support
online filesystem resize. (originally user had to use flag '-n' to bypass
this filesystem check)
Simultaneous -a and --refresh is not valid.
poll+monitor are valid together with or without -ay* (but not with -an*)
No longer print polling results summary if no LVs in the VG were polled.
Makes clang happier as it covers all code paths and avoids NULL pointer
dereference through the 'com' pointer (which is NULL by default static
initialisation).
Reported by clang as: Argument with 'nonnull' attribute passed null
Reuse the result of the last strchr() call - make sure, 'st' point is not
null for the next strchr() call.
