IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
A previous check-in added logic to handle the case where both images
of a mirrored log failed. It solved the problem by simply removing
the log entirely - leaving the parent mirror with a 'core' log. This
worked for most cases. However, if there was a small delay between
the failures of the two mirrored log devices, the mirror would hang,
LVM would hang, and no additional LVM commands could be issued.
When the first leg of the log fails, it signals the need for repair.
Before 'lvconvert --repair' is run by dmeventd, the second leg fails.
'lvconvert' would see both devices as failed and try to remove the
log entirely. When it came time to suspend the parent mirror to
update the configuration, the suspend would hang because it couldn't
get any I/O through the mirrored log, which was plugged waiting for
corrective action. The solution is to replace the log with an error
target to clear any pending writes before removing it. This allows
the parent mirror to suspend and make the proper changes.
When using vgmetadatacopies value other than "umanaged" (0), prompt
the user if the usage of --metadataignore would change the value of
vgmetadatacopies. The main 2 cases are:
1) pvchange --metadataignore
2) vgextend --metadataignore
We leave the prompt check in the tools, and do not change anything
if the user says 'n'.
Examples:
vgextend --metadataignore y vgtest /dev/loop0
Setting metadataignore will override preferred number of copies of VG vgtest metadata.
Are you sure? [y/n]: y
No physical volume label read from /dev/loop0
Physical volume "/dev/loop0" successfully created
Volume group "vgtest" successfully extended
pvchange --metadataignore y /dev/loop3
Setting metadataignore on /dev/loop3 will override preferred number of copies of VG vgtest metadata.
Are you sure? [y/n]: y
WARNING: Changing preferred number of copies of VG vgtest metadata from 3 to 2
Physical volume "/dev/loop3" changed
1 physical volume changed / 0 physical volumes not changed
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
- If a PV contained empty mdas, the auto-recovery code was not kicking in.
- The 'inconsistent' state was getting lost when metadata was cached so
recovery didn't kick in. But leave the behaviour alone when using
precommitted metadata because of a warning in a confusing FIXME.
In my testing, pvs and vgs didn't repair inconsistent metadata like they
used to do. (How many other tools fail similarly now?)
And there should be no need to cache inconsistent metadata because it is
supposed to get repaired under the protection of a write lock immediately it is
discovered.
This code is in need of a redesign based on first principles.
I still see bugs in this code and this commit is risky.
Rather than attempting to remove all the images of a mirrored
log volume via remove_mirror_images, simply remove the log
if all its devices have failed.
Taka was the first to report that there is still an outstanding
issue with handling this case. I've managed to reproduce it
only very rarely, and am still working on identifying the problem.
Failing to handle the problem rarely is better than not handling
the scenario at all, so I'm checking this in.
Moreover, in current mirror handling, when it calls activate
on removed but suspended detached log this counter drops below zero
and confuses debug log.
The same region size is used for both mirror volume and mirrored
log volume, but when the physical extent size is bigger than region size,
the size of mirror leg for mirrored log is smaller than the region size
and lvcreate command fails.
This patch adjusts a region size of mirrored log to a smaller value of
region size or physical extent size.
[This patch ensures that the region_size of the mirrored log does not
exceed the size of the mirrored log itself, which would violate the
kernel constraint: (region_size <= ti->len).]
Signed-off-by: Takahiro Yasui <takahiro.yasui@hds.com>
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Preload libc.mo file for localized lvm before taking memory lock - this way
we prevent disk access for some error paths in libdm, that prints localized
errno messages while they are still in memory locked state.
- s/Active clustred VG/clustered VG/ (only LV can be active)
- print only active LVs (not all) in status command
(In the lvdisplay form /dev/vg/lv.)
For now, still use awk (already used in clustered_vgs).
https://bugzilla.redhat.com/show_bug.cgi?id=598495
to 3-way mirror. When conversion operations are performed on
these types of mirrors, log options can be confused/ignored.
In the case of a converting 3-way mirror, we have a top-level
2-way corelog mirror whose legs are 1) a 2-way disk-log mirror
and 2) a linear device. If we wish to convert this 3-way mirror
to a 2-way mirror, the linear device is removed and the extra
top layer is eliminated. If we also wished to convert the disk
log to a core log in the same step, ambiguity creeps in. It is
somewhat obvious what the user wants - a 2-way mirror with a
corelog. However, looking at the top level mirror before
compression, it seems that the mirror already has a core log.
This is why the operation seemed to fail.
This patch simply re-evaluates what mirrored_seg points to after
a compression and then considers the log argument.
This is a fix for bug 599898.
Because execve stops the command loop,
we never receive response (only socket close) for clvmd -S,
so waiting for response here makes no sense.
But if the calling process (clvmd -S) exits too early, connection
is closed from client side, clvmd takes this as an error and
never run restart code.
Ugly hack(TM).
When using clustered mirrors, we need device nodes to be created during
processing of device tree, not at its end like we normally do (we need to
access the nodes in cmirror prematurely). Therefore we use a new flag called
"immediate_dev_node" stored in deptree's load_properties struct to instruct the
device tree processing code to immediately synchronize with udev and flush all
stacked node operations so the nodes are prepared for use.
For now, the immediate_dev_node is used for clustered mirrors during
processing the dm_tree_preload_children code only. We can add more later if
needed.
linux/kdev_t.h even though it wasn't needed. Strangely, it seems
to be causing problems on various architectures (i686) in the
function daemons/cmirrord/functions.c:disk_status_info()->sprintf.
I'm not sure why this is a problem since none of the macros in
kdev_t.h are used in that code, but it certainly doesn't hurt to
pull an unnecessary header and it seems to fix the problem.
Code is mixing up internal DLM and LVM definitions of lock
modes and flags.
OpenAIS and singlenode locking do not depend on DLM but
code currently cannot be compiled without libdlm.h!
LCK_* flags is LVM abstraction, used through all the code.
Only low-level backend (clvmd-cman etc) should use DLM definitions,
also this code should do all needed conversions.
Because there are two DLM flags used in generic code
(NOQUEUE, CONVERT) we define it similar way like lock modes.
(So all needed binary-compatible flags are on one place in locking.h)
(Further code cleaning still needed, though:-)
