IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Dop unused value assignments.
Unknown is detected via other combination
(!linear && !striped).
Also change the log_error() message into a warning,
since the function is not really returning error,
but still keep the INTERNAL_ERROR.
Ret value is always set later.
Invalid devices no longer included in the counters printed at the end.
May now need to use --ignoreskippedcluster if relying upon exit status.
If more than one change is requested per-PV, attempt to perform them
all. Note that different arguments still handle exit status
differently.
This is a followup patch for previous patchset that enables selection in
process_each_* fns to fix an issue where field prefixes are not
automatically used for fields in selection criteria.
Use initial report type that matches the intention of each process_each_* functions:
- _process_pvs_in_vg - PVS
- process_each_vg - VGS
- process_each_lv and process_each_lv_in_vg - LVS
This is not normally needed for the selection handle init, BUT we would
miss the field prefix matching, e.g.
lvchange -ay -S 'name=lvol0'
The "name" above would not work if we didn't initialize reporting with
the LVS type at its start. If we pass proper init type, reporting code
can deduce the prefix automatically ("lv_name" in this case).
This report type is then changed further based on what selection criteria we
have. When doing pure selection, not report output, the final report type
is purely based on combination of this initial report type and report types
of the fields used in selection criteria.
pvchange is an exception that does not use toollib yet for iterating
over the list of PVs (process_each_pv) so intialize the
processing_handle and use just like it's used in toollib.
The list of strings is used quite frequently and we'd like to reuse
this simple structure for report selection support too. Make it part
of libdevmapper for general reuse throughout the code.
This also simplifies the LVM code a bit since we don't need to
include and manage lvm-types.h anymore (the string list was the
only structure defined there).
Commit 1a832398a7 moved
some code from _pvchange_single() to main pvchange() and
introduced exit code regression as return codes have not
been properly changed, thus pvchange command exited
with '0' exit code, even though it has reported error.
Also there is a missing vg unlock in error path.
Fix it by counting the total number of expected calls before
checking for pvname and also unlock and relase vg when
pv is not found.
Previously, we have relied on UUIDs alone, and on lvmcache to make getting a
"new copy" of VG metadata fast. If the code which triggers the activation has
the correct VG metadata at hand (the version which is currently on disk), it can
now hand it to the activation code directly.
...to not pollute the common and format-independent code in the
abstraction layer above.
The format1 pv_write has common code for writing metadata and
PV header by calling the "write_disks" fn and when rewriting
the header itself only (e.g. just for the purpose of changing
the PV UUID) during the pvchange operation, we had to tweak
this functionality for the format1 case and we had to assign
the PV the orphan state temporarily.
This patch removes the need for this format1 tweak and it calls
the write_disks with appropriate flag indicating whether this is
a PV write call or a VG write call, allowing for metatada update
for the latter one.
Also, a side effect of the former tweak was that it effectively
invalidated the cache (even for the non-format1 PVs) as we
assigned it the orphan state temporarily just for the format1
PV write to pass.
Also, that tweak made it difficult to directly detect whether
a PV was part of a VG or not because the state was incorrect.
Also, it's not necessary to backup and restore some PV fields
when doing a PV write:
orig_pe_size = pv_pe_size(pv);
orig_pe_start = pv_pe_start(pv);
orig_pe_count = pv_pe_count(pv);
...
pv_write(pv)
...
pv->pe_size = orig_pe_size;
pv->pe_start = orig_pe_start;
pv->pe_count = orig_pe_count;
...this is already done by the layer below itself (the _format1_pv_write fn).
So let's have this cleaned up so we don't need to be bothered
about any 'format1 special case for pv_write' anymore.
Use log_warn to print non-fatal warning messages.
Use of log_error would confuse checker for testing
whether proper error has been reported for some real error.
Accept -q as the short form of --quiet.
Suppress non-essential standard output if -q is given twice.
Treat log/silent in lvm.conf as equivalent to -qq.
Review all log_print messages and change some to
log_print_unless_silent.
When silent, the following commands still produce output:
dumpconfig, lvdisplay, lvmdiskscan, lvs, pvck, pvdisplay,
pvs, version, vgcfgrestore -l, vgdisplay, vgs.
[Needs checking.]
Non-essential messages are shifted from log level 4 to log level 5
for syslog and lvm2_log_fn purposes.
leaving behind the LVM-specific parts of the code (convenience wrappers that
handle `struct device` and `struct cmd_context`, basically). A number of
functions have been renamed (in addition to getting a dm_ prefix) -- namely,
all of the config interface now has a dm_config_ prefix.
Move the free_vg() to vg.c and replace free_vg with release_vg
and make the _free_vg internal.
Patch is needed for sharing VG in vginfo cache so the release_vg function name
is a better fit here.
We allow writing non-orphan PVs only for resize now. The "orphan PV" assert
in pv_write fn uses the "allow_non_orphan" parameter to control this assert.
However, we should find a more elaborate solution so we can remove this
restriction altogether (pv_write together with vg_write is not atomic, we
need to find a safe mechanism so there's an easy revert possible in case of
an error).
When using vgmetadatacopies value other than "umanaged" (0), prompt
the user if the usage of --metadataignore would change the value of
vgmetadatacopies. The main 2 cases are:
1) pvchange --metadataignore
2) vgextend --metadataignore
We leave the prompt check in the tools, and do not change anything
if the user says 'n'.
Examples:
vgextend --metadataignore y vgtest /dev/loop0
Setting metadataignore will override preferred number of copies of VG vgtest metadata.
Are you sure? [y/n]: y
No physical volume label read from /dev/loop0
Physical volume "/dev/loop0" successfully created
Volume group "vgtest" successfully extended
pvchange --metadataignore y /dev/loop3
Setting metadataignore on /dev/loop3 will override preferred number of copies of VG vgtest metadata.
Are you sure? [y/n]: y
WARNING: Changing preferred number of copies of VG vgtest metadata from 3 to 2
Physical volume "/dev/loop3" changed
1 physical volume changed / 0 physical volumes not changed
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
In preparation to call this from both pvcreate as well as pvchange,
move the guts of metadataignore into a library function.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
When a user explicitly sets a new mda ignore value for a PV, we
should update vg_mda_copies accordingly. When the VG is written
out, the user would not want the new ignore state to get lost as
a result of the vg_mda_copies value and logic in the vg_write
path.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
This patch just modifies pvchange to call the underlying ignore
functions for mdas. Ensure special cases do not reflect changes
in metadata (PVs with 0 mdas, setting ignored when already ignored,
clearing ignored when not ignored).
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Earlier patches added some infrastructure to lookup a vgname from
a pvname. We now can cleanup some of the pvchange and other code
by requiring callers that want to modify some pv property:
1) lookup the vgname by the pvname
2) use the vgname to obtain a vg handle
3) get the pv handle from the vg handle
This should work going forward and be a much cleaner interface,
as we move away from pvs as standalone objects.
Fix vg_read() error paths to properly release upon vg_read_error().
Note that in the iterator paths (process_each_*()), we release
inside the iterator so no individual cleanup is needed. However there
are a number of other places we missed the cleanup. Proper cleanup
when vg_read_error() is true should be calling vg_release(vg), since
there should be no locks held if we get an error (except in certain
special cases, which IMO we should work to remove from the code).
Unfortunately the testsuite is unable to detect these types of memory
leaks. Most of them can be easily seen if you try an operation
(e.g. lvcreate) with a volume group that does not exist. Error
message looks like this:
Volume group "vg2" not found
You have a memory leak (not released memory pool):
[0x1975eb8]
You have a memory leak (not released memory pool):
[0x1975eb8]
Author: Dave Wysochanski <dwysocha@redhat.com>
Sun May 3 11:40:51 CEST 2009 Petr Rockai <me@mornfall.net>
* Convert the straight instances of vg_lock_and_read to new vg_read(_for_update).
Rebased 6/26/09 by Dave W.
Sun May 3 11:40:51 CEST 2009 Petr Rockai <me@mornfall.net>
* Convert the straight instances of vg_lock_and_read to new vg_read(_for_update).
Author: Petr Rockai <prockai@redhat.com>
Committer: Dave Wysochanski <dwysocha@redhat.com>
