1
0
mirror of git://sourceware.org/git/lvm2.git synced 2024-12-29 15:22:30 +03:00
Commit Graph

73 Commits

Author SHA1 Message Date
Zdenek Kabelac
1bed2cafe8 vdo: read live vdo size configuration
Introduce struct vdo_pool_size_config usable to calculate necessary
memory size for active VDO volume.

Function lv_vdo_pool_size_config() is able to read out this
configuration out of runtime DM table line.
2023-01-16 12:37:40 +01:00
David Teigland
264827cb98 lvresize: add new options and defaults for fs handling
The new option "--fs String" for lvresize/lvreduce/lvextend
controls the handling of file systems before/after resizing
the LV.  --resizefs is the same as --fs resize.

The new option "--fsmode String" can be used to control
mounting and unmounting of the fs during resizing.

Possible --fs values:

checksize
  Only applies to reducing size; does nothing for extend.
  Check the fs size and reduce the LV if the fs is not using
  the affected space, i.e. the fs does not need to be shrunk.
  Fail the command without reducing the fs or LV if the fs is
  using the affected space.

resize
  Resize the fs using the fs-specific resize command.
  This may include mounting, unmounting, or running fsck.
  See --fsmode to control mounting behavior, and --nofsck to
  disable fsck.

resize_fsadm
  Use the old method of calling fsadm to handle the fs
  (deprecated.) Warning: this option does not prevent lvreduce
  from destroying file systems that are unmounted (or mounted
  if prompts are skipped.)

ignore
  Resize the LV without checking for or handling a file system.
  Warning: using ignore when reducing the LV size may destroy the
  file system.

Possible --fsmode values:

manage
  Mount or unmount the fs as needed to resize the fs,
  and attempt to restore the original mount state at the end.

nochange
  Do not mount or unmount the fs. If mounting or unmounting
  is required to resize the fs, then do not resize the fs or
  the LV and fail the command.

offline
  Unmount the fs if it is mounted, and resize the fs while it
  is unmounted. If mounting is required to resize the fs,
  then do not resize the fs or the LV and fail the command.

Notes on lvreduce:

When no --fs or --resizefs option is specified:
. lvextend default behavior is fs ignore.
. lvreduce default behavior is fs checksize
  (includes activating the LV.)

With the exception of --fs resize_fsadm|ignore, lvreduce requires
the recent libblkid fields FSLASTBLOCK and FSBLOCKSIZE.
FSLASTBLOCK*FSBLOCKSIZE is the last byte used by the fs on the LV,
which determines if reducing the fs is necessary.
2022-09-13 15:15:05 -05:00
Zdenek Kabelac
0d67bc96fd activate: add get_device_list
Add funtion get_device_list() to get list of active DM devices.
Handled through new dm_task_get_device_list().
2021-12-20 16:13:28 +01:00
Zdenek Kabelac
a9b4acd511 dev_manager: add lv_raid_status
Just like with other segtype use this function to get whole
raid status info available per a single ioctl call.

Also it nicely simplifies read of percentage info about
in_sync portion of raid volume.

TODO: drop use of other calls then lv_raid_status call,
since all such calls could already use status - so it just
adds unnecessary duplication.
2021-03-18 18:34:57 +01:00
Zdenek Kabelac
e5a600860c dev_manager: status check with info check included
Reduce ioctl count and avoid separate info check,
when we can get the same info from status ioctl.

When devmanager calls return 0, then the exists value 0
means the reason of failure is missing device in table.
In such case we avoid stack trace.

Swap the flush parameter for the vdo status function
to match thin pool status.
2021-03-18 18:34:57 +01:00
Zdenek Kabelac
4de6f58085 thin: use lv_status_thin and lv_status_thin_pool
Introduce structures lv_status_thin_pool and
lv_status_thin  (pair to lv_status_cache, lv_status_vdo)

Convert lv_thin_percent() -> lv_thin_status()
and  lv_thin_pool_percent() + lv_thin_pool_transaction_id() ->
lv_thin_pool_status().

This way a function user can see not only percentages, but also
other important status info about thin-pool.

TODO:
This patch tries to not change too many other things,
but pool_below_threshold() now uses new thin-pool info to return
failure if thin-pool cannot be actually modified.
This should be handle separately in a better way.
2020-09-29 10:43:56 +02:00
Zdenek Kabelac
80b2de9e6a mirror: fix leg splitting
Enhance lv_info with lv_info_with_name_check.
This 'variant' not only check existance if UUID in DM table
but also compares its  DM name  whether it's matching expected LV name.
Otherwise activation may 'skip' activation with rename in case the
DM UUID already exists, just device is different name.

This change make fairly easier manipulation with i.e. detached mirror
leg which ATM is using same UUID - just the LV name have been changed.

Used code was not able to run 'activation' (and do a rename) and just
skipped the call. So the code used to do a workaround and 'tried'
to deactivate such LV firts - this however work only in non-clvmd case,
as cluster was not having the lock for deactivated LV.

With this extended lv_info code will run 'activation' and will
synchronize the name to match expected LV name.

Patch extends _lv_info() with new paramter 'with_name_check',
which is later translated into 'name_check' argument for
_info_run() which in case of name mismatch evaluates the
check as if device does not exists.

Such call is only used in one place _lv_activate() which then
let activation run.  All other invocation of _info() calls
are left intact.

TODO: fix mirror table manipulation (and raid)....
2019-10-31 15:31:30 +01:00
Zdenek Kabelac
1cd308d640 cachevol: drop no longer needed functions
Code is no longer used/needed.
2019-10-14 15:20:25 +02:00
Zdenek Kabelac
1eeb2fa3f6 dev_manager: add dev_manager_remove_dm_major_minor
Move DM usage into dev_manager.c source file.
Also convert STATUS to INFO ioctl - as that's enough
to obtain UUID - this also avoid issuing unwanted flush on checked DM
device for being mpath.
2019-03-20 14:37:10 +01:00
David Teigland
a9eaab6beb Use "cachevol" to refer to cache on a single LV
and "cachepool" to refer to a cache on a cache pool object.

The problem was that the --cachepool option was being used
to refer to both a cache pool object, and to a standard LV
used for caching.  This could be somewhat confusing, and it
made it less clear when each kind would be used.  By
separating them, it's clear when a cachepool or a cachevol
should be used.

Previously:

- lvm would use the cache pool approach when the user passed
  a cache-pool LV to the --cachepool option.

- lvm would use the cache vol approach when the user passed
  a standard LV in the --cachepool option.

Now:

- lvm will always use the cache pool approach when the user
  uses the --cachepool option.

- lvm will always use the cache vol approach when the user
  uses the --cachevol option.
2019-02-27 08:52:34 -06:00
Zdenek Kabelac
e689bfb5d5 vdo: minor API cleanup
Since the parse_vdo_pool_status() become vdo_manip API part,
and there will be no 'dm' matching status parser,
the API can be simplified and closely match thin API here.
2019-01-21 12:53:16 +01:00
David Teigland
3ae5569570 Add dm-writecache support
dm-writecache is used like dm-cache with a standard LV
as the cache.

$ lvcreate -n main -L 128M -an foo /dev/loop0

$ lvcreate -n fast -L 32M -an foo /dev/pmem0

$ lvconvert --type writecache --cachepool fast foo/main

$ lvs -a foo -o+devices
  LV            VG  Attr       LSize   Origin        Devices
  [fast]        foo -wi-------  32.00m               /dev/pmem0(0)
  main          foo Cwi------- 128.00m [main_wcorig] main_wcorig(0)
  [main_wcorig] foo -wi------- 128.00m               /dev/loop0(0)

$ lvchange -ay foo/main

$ dmsetup table
foo-main_wcorig: 0 262144 linear 7:0 2048
foo-main: 0 262144 writecache p 253:4 253:3 4096 0
foo-fast: 0 65536 linear 259:0 2048

$ lvchange -an foo/main

$ lvconvert --splitcache foo/main

$ lvs -a foo -o+devices
  LV   VG  Attr       LSize   Devices
  fast foo -wi-------  32.00m /dev/pmem0(0)
  main foo -wi------- 128.00m /dev/loop0(0)
2018-11-06 14:18:41 -06:00
David Teigland
cac4a9743a Allow dm-cache cache device to be standard LV
If a single, standard LV is specified as the cache, use
it directly instead of converting it into a cache-pool
object with two separate LVs (for data and metadata).

With a single LV as the cache, lvm will use blocks at the
beginning for metadata, and the rest for data.  Separate
dm linear devices are set up to point at the metadata and
data areas of the LV.  These dm devs are given to the
dm-cache target to use.

The single LV cache cannot be resized without recreating it.

If the --poolmetadata option is used to specify an LV for
metadata, then a cache pool will be created (with separate
LVs for data and metadata.)

Usage:

$ lvcreate -n main -L 128M vg /dev/loop0

$ lvcreate -n fast -L 64M vg /dev/loop1

$ lvs -a vg
  LV   VG Attr       LSize   Type   Devices
  main vg -wi-a----- 128.00m linear /dev/loop0(0)
  fast vg -wi-a-----  64.00m linear /dev/loop1(0)

$ lvconvert --type cache --cachepool fast vg/main

$ lvs -a vg
  LV           VG Attr       LSize   Origin       Pool  Type   Devices
  [fast]       vg Cwi---C---  64.00m                     linear /dev/loop1(0)
  main         vg Cwi---C--- 128.00m [main_corig] [fast] cache  main_corig(0)
  [main_corig] vg owi---C--- 128.00m                     linear /dev/loop0(0)

$ lvchange -ay vg/main

$ dmsetup ls
vg-fast_cdata   (253:4)
vg-fast_cmeta   (253:5)
vg-main_corig   (253:6)
vg-main (253:24)
vg-fast (253:3)

$ dmsetup table
vg-fast_cdata: 0 98304 linear 253:3 32768
vg-fast_cmeta: 0 32768 linear 253:3 0
vg-main_corig: 0 262144 linear 7:0 2048
vg-main: 0 262144 cache 253:5 253:4 253:6 128 2 metadata2 writethrough mq 0
vg-fast: 0 131072 linear 7:1 2048

$ lvchange -an vg/min

$ lvconvert --splitcache vg/main

$ lvs -a vg
  LV   VG Attr       LSize   Type   Devices
  fast vg -wi-------  64.00m linear /dev/loop1(0)
  main vg -wi------- 128.00m linear /dev/loop0(0)
2018-11-06 13:44:54 -06:00
Zdenek Kabelac
4f708e8709 dev_manager: add dev_manager_vdo_pool_status 2018-07-09 15:28:35 +02:00
Joe Thornber
7f97c7ea9a build: Don't generate symlinks in include/ dir
As we start refactoring the code to break dependencies (see doc/refactoring.txt),
I want us to use full paths in the includes (eg, #include "base/data-struct/list.h").
This makes it more obvious when we're breaking abstraction boundaries, eg, including a file in
metadata/ from base/
2018-05-14 10:30:20 +01:00
Zdenek Kabelac
a6fdb9d9d7 snapshot: keep COW writable for read-only volumes
When snapshot is created in read-only mode with 'lvcreate -s -pr...',
lvm2 still needs to be able to write to layered -cow volume
to store metadata and exceptions blocks.

TODO: in some case we might be able to do full tree with read-only
volume but this probably needs futher validation:
1. checking snapshot header already exist
2. origin & snapshot are both in read-only mode.
2018-03-08 10:39:03 +01:00
Zdenek Kabelac
a4f8d1165c setup_task: add with_flush
To get better control when flushing is used add extra arg when
setting up dm task.

By default now check dm device status without flush.
(At this moment this should effect only thin and cache volumes).

Also switch dev_manager_thin_pool_status() to use more
readable 'flush' parameter instead of 'no_flush'.
2016-05-27 15:47:24 +02:00
Alasdair G Kergon
f40dfb48ad activation: Skip another non-prefixed info ioctl.
_percent() also does a lookup by dm uuid.
Also get kernel version from cmd->kernel_vsn.
2016-04-08 16:27:12 +01:00
Zdenek Kabelac
fcbef05aae doc: change fsf address
Hmm rpmlint suggest fsf is using a different address these days,
so lets keep it up-to-date
2016-01-21 12:11:37 +01:00
Peter Rajnoha
a2c1024f6a dev_manager: enhance dev_manager_info to acquire LV segment status if requested, add lv_info_with_seg_status fn 2014-11-11 13:04:02 +01:00
Zdenek Kabelac
ab49120465 cache: lv_cache_status
Replace lv_cache_block_info() and lv_cache_policy_info()
with lv_cache_status() which directly returns
dm_status_cache structure together with some calculated
values.

After use  mem pool stored inside lv_status_cache structure
needs to be destroyed.
2014-11-03 14:19:33 +01:00
Zdenek Kabelac
84cdf85bd2 cleanup: constify activation usage of lv pointer
Let's enforce cheking of write access to LV by compiler.
Activation part does never need to write anything to LV
so keep LV pointer const.
2014-09-24 10:54:47 +02:00
Peter Rajnoha
cfed0d09e8 report: select: refactor: move percent handling code to libdm for reuse 2014-06-17 16:27:21 +02:00
Jonathan Brassow
75b8ea195c cache: New functions for gathering info on cache devices
Building on the new DM function that parses DM cache status, we
introduce the following LVM level functions to aquire information
about cache devices:
- lv_cache_block_info: retrieves information on the cache's block/chunk usage
- lv_cache_policy_info: retrieves information on the cache's policy
2014-01-28 12:24:51 -06:00
Zdenek Kabelac
572983d793 thin: read table line with thin device id
Add functions to parse thin table line to
obtain thin device id.
2013-12-04 14:30:25 +01:00
Jonathan Brassow
ff64e3500f RAID: Add scrubbing support for RAID LVs
New options to 'lvchange' allow users to scrub their RAID LVs.
Synopsis:
	lvchange --syncaction {check|repair} vg/raid_lv

RAID scrubbing is the process of reading all the data and parity blocks in
an array and checking to see whether they are coherent.  'lvchange' can
now initaite the two scrubbing operations: "check" and "repair".  "check"
will go over the array and recored the number of discrepancies but not
repair them.  "repair" will correct the discrepancies as it finds them.

'lvchange --syncaction repair vg/raid_lv' is not to be confused with
'lvconvert --repair vg/raid_lv'.  The former initiates a background
synchronization operation on the array, while the latter is designed to
repair/replace failed devices in a mirror or RAID logical volume.

Additional reporting has been added for 'lvs' to support the new
operations.  Two new printable fields (which are not printed by
default) have been added: "syncaction" and "mismatches".  These
can be accessed using the '-o' option to 'lvs', like:
	lvs -o +syncaction,mismatches vg/lv
"syncaction" will print the current synchronization operation that the
RAID volume is performing.  It can be one of the following:
        - idle:   All sync operations complete (doing nothing)
        - resync: Initializing an array or recovering after a machine failure
        - recover: Replacing a device in the array
        - check: Looking for array inconsistencies
        - repair: Looking for and repairing inconsistencies
The "mismatches" field with print the number of descrepancies found during
a check or repair operation.

The 'Cpy%Sync' field already available to 'lvs' will print the progress
of any of the above syncactions, including check and repair.

Finally, the lv_attr field has changed to accomadate the scrubbing operations
as well.  The role of the 'p'artial character in the lv_attr report field
as expanded.  "Partial" is really an indicator for the health of a
logical volume and it makes sense to extend this include other health
indicators as well, specifically:
        'm'ismatches:  Indicates that there are discrepancies in a RAID
                       LV.  This character is shown after a scrubbing
                       operation has detected that portions of the RAID
                       are not coherent.
        'r'efresh   :  Indicates that a device in a RAID array has suffered
                       a failure and the kernel regards it as failed -
                       even though LVM can read the device label and
                       considers the device to be ok.  The LV should be
                       'r'efreshed to notify the kernel that the device is
                       now available, or the device should be 'r'eplaced
                       if it is suspected of failing.
2013-04-11 15:33:59 -05:00
Zdenek Kabelac
a4870c79ca thin: use noflush for obtaining transaction_id
Do not flush thin pool data, when reading transation_id status.
2013-02-04 19:05:56 +01:00
Jonathan Brassow
c8242e5cf4 RAID: Add RAID status accessibility functions
Similar to the way thin* accesses its kernel status, we add a method
for RAID to grab the various values in its status output without the
higher levels (LVM) having to understand how to parse the output.
Added functions include:
        - lib/activate/dev_manager.c:dev_manager_raid_status()
          Pulls the status line from the kernel

        - libdm/libdm-deptree.c:dm_get_status_raid()
          Parses status line and puts components into dm_status_raid struct

        - lib/activate/activate.c:lv_raid_dev_health()
          Accesses dm_status_raid to deliver raid dev_health string

The new structure and functions can provide a more unified way to access
status information.  ('lv_raid_percent' could switch to using these
functions, for example.)
2013-02-01 11:31:47 -06:00
Zdenek Kabelac
bdba904d7c Thin add lv_thin_pool_transaction_id
Easy function to get transaction_id status value.
2012-01-25 08:48:42 +00:00
Zdenek Kabelac
76ee08995e Thin add function to read thin volume percent
This value returns percentage of 'mapped' size compared with total LV size.
(Without passed seg pointer it return highest mapped size - but it's
not used yet.)
2012-01-19 15:27:54 +00:00
Zdenek Kabelac
6336898318 Thin updated support for thin pool percent
Support to check also for metadata percent
(By checking whether seg pointer is set)
2012-01-19 15:25:37 +00:00
Alasdair Kergon
a18dcfb533 Add activation/read_only_volume_list to override LV permission in metadata. 2012-01-12 01:51:56 +00:00
Zdenek Kabelac
c0fcaacb8d Thin add dev_manager_thin_pool_percent
dev manager function to read percent info from thin pool.
2011-12-21 13:09:33 +00:00
Zdenek Kabelac
92cdc25882 Drop messages from lvm app context
(revert)
Thinp target uses activation context.
2011-10-17 14:18:07 +00:00
Zdenek Kabelac
a00cb3a6b0 Add lvm functions for sending messages.
Functions are currently only needed for thin provissioning.
2011-10-03 18:37:47 +00:00
Zdenek Kabelac
81beded3af Add lv_activate_opts structure
To avoid modification of 'read-only' volume group structure
add a new structure to pass local data around the code for LV
activation.

As origin_only is one such flag - replace this parameter with new
struct lv_activate_opts.

More parameters might eventually become part of lv_activate_opts.
2011-06-17 14:14:19 +00:00
Alasdair Kergon
df390f1799 Major pvmove fix to issue ioctls in the correct order when multiple LVs
are affected by the move.  (Currently it's possible for I/O to become
trapped between suspended devices amongst other problems.

The current fix was selected so as to minimise the testing surface.  I
hope eventually to replace it with a cleaner one that extends the
deptree code.

Some lvconvert scenarios still suffer from related problems.
2011-06-11 00:03:06 +00:00
Zdenek Kabelac
81e606ab2c Remove check for lv is NULL
'lv' is deferenced in the begining of the function so any check
later is not helpful.

Parameters for dev_manager_transien() are marked as nonnull.
2010-11-30 22:28:06 +00:00
Petr Rockai
8191fe4f4a Refactor the percent (mirror sync, snapshot usage) handling code to use
fixed-point values instead of a combination of a float value and an enum.
2010-11-30 11:53:31 +00:00
Alasdair Kergon
2d6fcbf67d Allow internal suspend and resume of origin without its snapshots. 2010-08-17 16:25:32 +00:00
Petr Rockai
d345bf2cd3 Account for mirror transient status when doing lvconvert --repair. 2010-05-24 15:32:20 +00:00
Milan Broz
ab9663f394 Always query device by uuid only.
lvm2 devices have always UUID set even if imported from lvm1 metadata.

Patch removes name argument from dev_manager_info call and converts
all activation related calls to use query by UUID.

Also it simplifies mknode call (which is the only user on mknodes parameter).
2010-02-24 20:00:56 +00:00
Mike Snitzer
6c1c02dc52 Change dev_manager_mirror_percent()'s 'struct logical_volume *' to be
'const'.  Be consistent with its use (and dev_manager_snapshot_percent()).

Pass 'lv' from dev_manager_snapshot_percent() to _percent() to
_percent_run().  _percent_run() always dereferenced 'lv' (when
initializing segh) even though it may have been NULL (as was the case
until now for dev_manager_snapshot_percent()).

If a "snapshot-origin" LV (snapshot-merge whose merge was deferred
becuase it was open) was passed to _percent_run() it would always return
100%.

Update _percent_run() to NOT return PERCENT_100 et. al. if
->target_percent() wasn't ever called and supplied 'lv' is a merging
origin.  A default return of 100% does not work for snapshot-merge.

Also tweak a related lvconvert log_error() to include "Aborting merge."
2010-01-15 22:58:25 +00:00
Alasdair Kergon
78ad1549a5 Introduce percent_range_t and centralise snapshot full/mirror in-sync checks. 2009-10-01 00:35:29 +00:00
Milan Broz
eb91c4eee3 Use suspend with flush when device size was changed during table preload.
This allows online mirror resize, also removes condition to preventing
code to do this.
2009-05-20 09:52:37 +00:00
Alasdair Kergon
a6b22cf317 readahead activation code (but no dm support yet) 2007-11-12 20:51:54 +00:00
Alasdair Kergon
be6845999b Fix inconsistent licence notices: executables are GPLv2; libraries LGPLv2.1. 2007-08-20 20:55:30 +00:00
Alasdair Kergon
9cd3426d3a Fix missing lockfs on first snapshot creation. 2006-08-08 21:20:00 +00:00
Alasdair Kergon
2293567c8c Fix lvcreate corelog validation.
Add --config for overriding most config file settings from cmdline.
  Quote arguments when printing command line.
  Remove linefeed from 'initialising logging' message.
  Add 'Completed' debug message.
  Don't attempt library exit after reloading config files.
  Always compile with libdevmapper, even if device-mapper is disabled.
2006-05-16 16:48:31 +00:00
Alasdair Kergon
898e6f8e41 Add mirror_library description to example.conf.
More compile-time cleanup.
2006-05-11 17:58:58 +00:00