IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The -a was being included in the set of "one or more"
options instead of an actual required option. Even
though the cmd def was not implementing the restrictions
correctly, the command internally was.
Adjust the cmd def code which did not support a command
with some real required options and a set of "one or more"
options.
uses vg_write to correct more common or less severe issues,
and also adds the ability to repair some metadata corruption
that couldn't be handled previously.
Add 'pvck --dump headers' to print all the
lvm ondisk structs. Also checks the values
and prints any problems.
The previous dump metadata is also converted to
use these same routines, which do not depend on lvm
fully scanning/reading/processing the headers and
metadata on disk. This makes it useful to get data in
cases where there is corruption that would otherwise
prevent the normal functions from working.
The new command 'pvck --dump metadata PV' will extract
the current version of VG metadata from a PV for testing
and debugging. --dump metadata_area extracts the entire
text metadata area.
Allow using caching with VDO.
User can either cache a single vdopool or
a vdo LV - difference when the caching is put-in depends on a use-case
and it's upto user to decide which kind of speed is expected.
and "cachepool" to refer to a cache on a cache pool object.
The problem was that the --cachepool option was being used
to refer to both a cache pool object, and to a standard LV
used for caching. This could be somewhat confusing, and it
made it less clear when each kind would be used. By
separating them, it's clear when a cachepool or a cachevol
should be used.
Previously:
- lvm would use the cache pool approach when the user passed
a cache-pool LV to the --cachepool option.
- lvm would use the cache vol approach when the user passed
a standard LV in the --cachepool option.
Now:
- lvm will always use the cache pool approach when the user
uses the --cachepool option.
- lvm will always use the cache vol approach when the user
uses the --cachevol option.
Just like we support for thin-pool syntax:
lvcreate --thinpool new_tpoolname -L Size vg
add same support logic with for vdo-poo:
lvcreate --vdopool new_vpoolname -L Size vg
Also move description of syntax bellow thin-pool, so it's
correctly ordered in generated man page.
instead of a separate --writecacheblocksize option.
writecache block_size is not technically a setting,
but it can borrow the option as a special case.
This fixes a problem in commit e6bb780d24, in which the
back compat handling for the old locking_type=4 was
incorrectly translated to mean the same thing as --readonly,
which prevented activation because activation uses an
exclusive vg lock. Previously, locking_type=4 allowed
activation.
If we see locking_type 4 in an old config, translate it to
the new combination of --readonly and --sysinit, which we
now define to mean the --readonly behavior with an exception
to allow activation.
The 'lvconvert LV' command def has caused multiple problems
for command matching because it matches the required options
of any lvconvert command. Any lvconvert with incorrect options
ends up matching 'lvconvert LV', which then produces an error
about incorrect options being used for 'lvconvert LV'. This
prevents suggestions from nearest-command partial command matches.
Add a special case for 'lvconvert LV' so that it won't be used
as a partial match for a command that has options specified.
Native disk scanning is now both reduced and
async/parallel, which makes it comparable in
performance (and often faster) when compared
to lvm using lvmetad.
Autoactivation now uses local temp files to record
online PVs, and no longer requires lvmetad.
There should be no apparent command-level change
in behavior.
It's no longer needed. Clustered VGs are now handled in
the same way as foreign VGs, and as shared VGs that
can't be accessed:
- A command processing all VGs sees a clustered VG,
prints a message ("Skipping clustered VG foo."),
skips it, and does not fail.
- A command where the clustered VG is explicitly
named on the command line, prints a message and fails.
"Cannot access clustered VG foo, see lvmlockd(8)."
The option is listed in the set of ignored options for
the commands that previously accepted it. (Removing it
entirely would cause commands/scripts to fail if they
set it.)
The last commit related to this was incomplete:
"Implement lock-override options without locking type"
This is further reworking and reduction of the locking.[ch]
layer which handled all clustering, but is now only used
for file locking. The "locking types" that this layer
implemented were removed previously, leaving only the
standard file locking. (Some cluster-related artifacts
remain to be cleared out later.)
Command options to override or modify locking behavior
are reimplemented here without using the locking types.
Also, deprecated locking_type values are recognized,
and implemented as if one of the equivalent override
options was set.
Options that override file locking are:
. --nolocking disables all file locking.
. --readonly grants read lock requests without actually
taking a file lock, and refuses write lock requests.
. --ignorelockingfailure tries to set up file locks and
uses them normally if possible. When not possible, it
behaves like --readonly, but allows activation.
. --sysinit is the same as ignorelockingfailure.
. global/metadata_read_only acquires actual read file
locks, and refuses write lock requests.
(Some of these options could probably be deprecated
because they were added as workarounds to various
locking_type behaviors that are now deprecated.)
The locking_type setting now has one valid value: 1 which
refers to standard file locking. Configs that contain
deprecated values are recognized and still work in
largely the same way:
. 0 disabled all locking, now implemented like --nolocking
is set. Allow the nolocking option in all commands.
. 1 is the normal file locking setting and is unchanged.
. 2 was for external locking which was not used, and
reverts to normal file locking.
. 3 was for cluster/clvm. This reverts to normal file
locking, and prints messages about lvmlockd.
. 4 was equivalent to readonly, now implemented like
--readonly is set.
. 5 disabled all locking, now implemented like
--nolocking is set.
Fixing regresion on argument acceptance where any lv can be passed
with paramaterless lvconvert which is meant to figure out needed
operation - i.e. wait for mirror synchronization.
User has no other 'effective' method to wait for mirror getting in-sync.
When certain cmd def RULE's fail, the error messages can
sometimes be confusing. This expands the error messages
to help clarify why the rule failed, especially in cases
where options are used incorrectly.
Enable handling of --poolmetadataspare so if user can prevent
creation of _pmspare volume during --repair operation (just
like during actual lvcreate or lvconvert) for pool volumes.
Add an independent command definition for "vgchange --locktype",
and split the implementation out of the set of common metadata
changes. It is unlike normal metadata changes, and can only
be run by itself. (Changing the lock type is similar in
principle to changing the VG name or the VG system ID; it
effects the ability of any host to see or access the VG.)
At some point this command lost the ability to forcibly change
the lock type of a shared VG to "none" (making it a local VG).
This can be necessary to repair shared VGs (e.g. recovery steps
that occur in vg_read are disabled for shared VGs because
they are not locked properly, or recovering sanlock locks
when the PV holding them is lost.)
"vgchange --locktype none --lockopt force VG" is used as the
method of forcing the shared VG to become local so that it
can be repaired.
Fill in some gaps where old versions of lvm allowed
--poll and --monitor in combination with other operations,
but those combinations had been lost since the cmd def work.
(The new cmd def code also added some combinations that
had been missed by the old code.)
Changes:
lvchange --activate: add poll and monitor options, and
add calls to them in implementation.
lvchange --refresh: add monitor option (poll already there),
and call to monitor in implementation.
lvchange <metadata ops>: add poll and monitor options, and
add calls to them in implementation.
vgchange <metadata ops>: add poll option (call to poll
already in implementation).
vgchange --refresh: remove monitor option (not used by code)
lvchange --persistent y: add poll and monitor options, and
add calls to them, and to activate
in the implementation. (Making it
match the main lvchange metadata
command.)
Summary of current usage:
lvchange --activate: monitor, poll
vgchange --activate: monitor, poll
lvchange --refresh: monitor, poll
vgchange --refresh: poll
lvchange --monitor: ok
lvchange --poll: ok
lvchange --monitor --poll: ok
vgchange --monitor: ok
vgchange --poll: ok
vgchange --monitor --poll: ok
lvchange <metadata ops>: monitor, poll
vgchange <metadata ops>: poll
These days --partial is only used with activation in
lvchange/vgchange. It probably had another meaning
at some point in history which is no longer used,
so ignore it in those cases.
When included in the OO list, the option is advertised in
help/man output, implying it is meaningful to the command,
when in fact the command never uses it.
The IO list means the option won't cause an error if it's
used, but is not displayed as an valid option for the command.
If the option is not included in either OO or IO lists,
using the option would cause a command error, which would cause
problems for anyone is using the option for historical reasons.
Fix a regression introduced by new command line processing
(see starting commit 1e2420bca8)
causing activation to be rejected in combination with setting
persistent minor device numbers.
Resolves: rhbz1437611
Fixes command defs related to creating a new thin pool and
then a new thin lv in the new pool.
1. lvcreate --size --virtualsize --thinpool
Needs a cmd def, it was missing.
The def is unique by the three required
options: size, virtualsize and thinpool.
2. lvcreate --size --virtualsize --thinpool VG
Needs a cmd def, it was missing.
The def is unique by the three required
options: size, virtualsize and thinpool,
and one required positional arg: VG.
3. lvcreate --thin --virtualsize --size LV_new|VG
This existing def should not accept an optional
--type thin, which if used makes it indistinct
from another def.
4. lvcreate --size --virtualsize VG
This existing def should not accept an optional
--type thin or --thin, which if used makes it
indistinct from other defs (e.g. 3)
This reverts commit 642d682d8d.
Using the thinpool option with this cmd def makes it
indistinct from other cmd defs where thinpool is a
required option.
lvcreate --thinpool POOL1 -L 100M --virtualsize 100M snapper_thinp
https://bugzilla.redhat.com/1434027
(The general rule is that a command is accepted if it is unambiguous.
The combination -L -V --thinpool uniquely identifies the operation.)
Systematically outline every combination of:
--type striped, --type mirror, --type raid, --mirrors, --stripes
and make sure each is assigned to one specific cmd def.
This revealed that a new command def is needed for
lvcreate that uses both --mirrors and --stripes
but no --type option.
The use of LVCREATE_RAID shortcut for an option set
resulted in mirrors/stripes being included in optional
opts set when they were already in the required list.
