IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
It's quite new feature which is not supported by older compilers.
So until some better macros are introduced into LVM code - hotfix current
compilation problems and compile this code only for __clang__ defining compilers.
The signalling code (pthread_cond_signal/pthread_cond_wait) in the
pre_and_post_thread was using the wait mutex (see man pthread_cond_wait)
incorrectly, and this could cause clvmd to deadlock when timing was
right. Detailed explanation of the problem follows.
There is a single mutex around (L for Lock, U for Unlock), a signal (S) and a
wait (W). C for pthread_create. Time flows from left to right, each arrow is a
thread.
So first the "naive" scenario, with no mutex (PPT = pre_and_post_thread, MCT =
main clvmd thread; well actually the thread that does read_from_local_sock). I
will also use X, for a moment when MCT actually waits for something to happen
that PPT was supposed to do.
MCT -----C ------S--X-----S----X----------------------S------XXXXXXXXX
| everything OK up to this --> <-- point...
PPT -----WWW-----WWWW------------------------------WWWWWWWWWWWWW
Ok, so pthread API actually does not let you use W/S like that. It goes out of
its way to tell you that you need a mutex to protect the W so that the above
cannot happen. *But* if you are creative and just lock around the W's and S's,
this happens:
MCT ----C-----LSU----X-----LSU----X------------LSU------XXXXXXX
|
PPT ---LWWWU-------LWWWWU-----------------------LWWWWWWWWW
Ooops. Nothing changed (the above is what actually was done by clvmd before
this satch). So let's do it differently, holding L locked *all* the time in
PPT, unless we are actually in W (this is something that the pthread API does
itself, see the man page).
MCT ----C-----LSU------X---LSU---X-----LLLLLLLSU----X----
| (and they live happily ever after)
PPT L---WWWWW---------WWWW----------------W----------
So W actually ensures that L is unlocked *atomically* together with entering
the wait. That means that unless PPT is actually waiting, it cannot be
signalled by MCT. So if MCT happens to signal it too soon (it wasn't waiting
yet), it (MCT) will be blocked on the mutex (L), until PPT is actually ready to
do something.
In all top vg read functions only LCK_VG_READ/WRITE can be used.
All other vg lock definitions are low-level backend machinery.
Moreover, LCK_WRITE cannot be tested through bitmask.
This patch fixes these mistakes.
For _recover_vg() we do not need lock_flags, it can be only
two of above and we always upgrading to LCK_VG_WRITE lock there.
(N.B. that code is racy)
There is no functional change in code (despite wrong masking
it produces correct bits:-)
Ignore snapshots when performing mirror recovery beneath an origin.
Pass LCK_ORIGIN_ONLY flag around cluster.
Add suspend_lv_origin and resume_lv_origin using LCK_ORIGIN_ONLY.
Switch dmeventd to use dm_create_lockfile and drop duplicate code.
Allow clvmd pidfile to be configurable.
Switch cmirrord and clvmd to use dm_create_lockfile.
Moreover, in current mirror handling, when it calls activate
on removed but suspended detached log this counter drops below zero
and confuses debug log.
When a mirror is being downconverted in a cluster, a series of suspends and
resumes is executed.
With the change to using UUIDs in dev_manager instead of names, the behaviour
has changed with regards to including an _mlog in the deptree of a logical
volume. In the old (pre-UUID-enabled) code, the _mlog would appear in a deptree
of any volume purely based on a name match: a linear volume foo would include
foo_mlog in its dependencies if that happened to exist. This behaviour was
fixed and the mlog is now only included for mirrors.
By a coincidence, this mlog bug had been hiding a different bug in clvmd. When
a mirror is being dismantled (and converted to a linear volume), it is first
suspended as a whole, then later resumed in parts. Nevertheless, the overall
memlock balance is maintained in this operation. The problem kicks in, because
even though the mirror log was suspended as part of the mirror, when the
dismantled mirror is resumed again, it is no longer a mirror and therefore the
mirror log stays suspended. This would not be a problem in itself, since
_delete_lv (from metadata/mirror.c) is called on it subsequently, which does an
activate/deactivate cycle and removes the LV. The activate/deactivate cycle
correctly prompts clvmd to resume the device: however, in doing this, it will
issue an unpaired resume operation (the suspend that caused the mirror log to
be suspended is paired with resuming the dismantled mirror later). We have
concluded that the path in clvmd should never affect memlock_count, since there
should never be an unmatched explicit suspend preceding this resume.
Because execve stops the command loop,
we never receive response (only socket close) for clvmd -S,
so waiting for response here makes no sense.
But if the calling process (clvmd -S) exits too early, connection
is closed from client side, clvmd takes this as an error and
never run restart code.
Ugly hack(TM).
Code is mixing up internal DLM and LVM definitions of lock
modes and flags.
OpenAIS and singlenode locking do not depend on DLM but
code currently cannot be compiled without libdlm.h!
LCK_* flags is LVM abstraction, used through all the code.
Only low-level backend (clvmd-cman etc) should use DLM definitions,
also this code should do all needed conversions.
Because there are two DLM flags used in generic code
(NOQUEUE, CONVERT) we define it similar way like lock modes.
(So all needed binary-compatible flags are on one place in locking.h)
(Further code cleaning still needed, though:-)
- allocate environment dynamically (still missing some limit?)
- try to recover, if destroy failed (do not destroy lvm here) and free memory
- check strdup() return codes
- report failure to log
- do not print NULL in exclusive lock loop
Patch is inspired by Debian's extra patch.
- removes OWNER & GROUP make vars they are parts of INSTALL command.
- adds INSTALL_PROGRAM for executable, uses $(INSTALL)
- adds INSTALL_DATA for non-executable data, uses ($INSTALL)
- adds INSTALL_WDATA for writable non-executable data, uses ($INSTALL)
- adds configure option --enable-write_install - to support
installatin of writable files used by distribution
- replaces usage of ifeq @LIB_SUFFIX@ with $(LIB_SUFFIX)
- installs .a files from static builds without executable flag
- installs .a files to $(usrlibdir) instead of $(libdir)
- installs all static binaries to $(staticdir)
- create .so links for devel package in $(usrlibdir) instead of
$(libdir)
- makes .so and .so.LIB_VERSION files within builddir
- removes VERSIONED_SHLIB and created versioned LIB_SHARED automagicaly
- install LIB_SHARED via install_lib_shared target
- install plugins via install_lib_shared_plugin target
- prints whole 'install' command during installation instead of less
informative "Installing $(something) $(somewhere)"
- install multiple man pages with one INSTALL command
- use DISTCLEAN_TARGETS instead of creating multiple distclean targets
Usage of VPATH makes troubles when used within $(builddir).
Not only source files are being found through VPATH,
but targets as well. (make --debug=v)
Thus if user builds the code in $(srcdir) and also in some $(builddir)
he gets mangled results as some generated files (i.e. .export.sym)
are 'reused' from $(srcdir) instead of $(builddir).
This patch switches to use vpath were we could explicitly name
suffixes that should be looked via vpath - we must take care,
we do not generate files with these suffixes:
.c, .in, .po, .exported_symbols
in clvmd, dmevend, man, tests.
Don't include dependency files for clow and cscope.out targets
Improve dependency tracking for dmeventd and liblvm2cmd sources.
clvmd's do_lock_lv() already properly controls dmeventd monitoring based
on LCK_DMEVENTD_MONITOR_MODE in lock_flags -- though one small fix was
needed for this to work: _lock_for_cluster() must treat
dmeventd_monitor_mode()'s return as a tri-state value.
Also cleanup do_lock_lv() to:
- explicitly init_dmeventd_monitor() based on LCK_DMEVENTD_MONITOR_MODE
- no longer reset init_dmeventd_monitor() to default at the end of
do_lock_lv() -- it is unnecessary
. Add "monitoring" option to "activation" section of lvm.conf
. Have clvmd consult the lvm.conf "activation/monitoring" too.
. Introduce toollib.c:get_activation_monitoring_mode().
. Error out when both --monitor and --ignoremonitoring are provided.
. Add --monitor and --ignoremonitoring support to lvcreate. Update
lvcreate man page accordingly.
. Clarify that '--monitor' controls the start and stop of monitoring in
the {vg,lv}change man pages.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Create new substituted variable PTHREAD_LIBS and link this library
only with tools/libs which really needs it - i.e. dmeventd.
Check for libpthread only for builds with clvmd or dmeventd.
Remove variable LIB_PTHREAD
For mirror repair (and similar tasks) it can happen that full
device rescan is issued from clvmd.
Because code can be in the middle of repair (calling suspend)
clvmd should never try to scan suspended devices
(otherwise it causes deadlock).
Also code must not change ignore_suspended_device flag when
doing refresh_filters (called from lvmcache scan code).
This patch tries to correctly track changes in lvmcache related to commit/revert.
For vg_commit: if there is cached precommitted metadata, after successfull commit
these metadata must be tracked as committed.
For vg_revert: remote nodes must drop precommitted metadata and its flag in lvmcache.
(N.B. Patch do not touch LV locks here in any way.)
All this machinery is needed to properly solve remote node cache invalidaton which
cause several problems recently observed.
Lock mode is int masked by LCK_TYPE_MASK, always.
Patch also remove uneccessary masking lock flag on sender side,
if masking is needed, it is don on client side already.
- Add drop_precommitted flag to force drop precommitted metadata
- add lvmcache_commit_metadata() which upgrades precommitted metadata in cache
No functional change in this patch - just preparation for following change.
And decode flags in humar readable form in client.
And clean some trailing whitespaces.
No functional change in this patch (only debugging messages changed).
The LV locks make sense only for clustered LVs.
Properly check cluster flag and never issue cluster lock here.
There are several places in code, where it is already checked, this
patch add this check to all needed calls.
In previous code the lock behaviour was inconsistent,
for example, the pre/post callback can take lock even for local volume,
but deactivate call do not released this lock and it remains held forever.
The local LV lock request now just let run the underlying activation code
on local node, the same process like in local locking.
(Again, this is important for new mirror repair calls, here for local
mirrors but with cluster locking enabled.)
This is unnoticed regression from commit 31672ff60e
The pre/post callback need to convert lock always, local node
is going to modify metadata in this case, it it fails conversion,
the call is ignored.
Also it fixes bug when the lock is not yet held, we cannot set LKF_CONVERT
in this case, it will fail because this lock do not exist.
Note that the automatic conversion is still disabled in activate
call, so the original fix (reactivation of exlusive LV) should
be still in place.
(Code already not fail if unlocking not locked resource.)
This is needed in pre/post lock_lv call, where we can
request the same lock on local node becuase of suspend call.
- do_command and lock_vg expect flags (no change here)
Bug fixes:
- lock_vg should check for NONBLOCK on lock_cmd, flags have this bit masked-out
- do_pre/post_command expect do not mask flag at all, this causes that
the code inside is never run! (see following patches, these functions
expect plain command without flags)
is granted at one mode and an attempt to convert it wthout the LCK_CONVERT
flag set then it will return errno=EBUSY.
This fixes a pretty bad bug in which an LV could be activated exclusively on
one node and lvchange -ay on another would convert it to shared!
It might break some things in other areas, but I doubt it.
interface it should be using, it can still be overriden with -I.
If corosync isn't running or there is no information then the usual
checking will happen.
This code only builds if corosync is available.
The changes to remove LCK_NONBLOCK from the LVM locks broke clvmd because the
code was clearly wrong but working anyway! The constant was being masked rather
than the variable that was supposed to match against it.
Current code, when need to ensure that volume is not
active on remote node, it need to try to exclusive
activate volume.
Patch adds simple clvmd command which queries all nodes
for lock for given resource.
The lock type is returned in reply in text.
(But code currently uses CR and EX modes only.)
Run backup of metadata on remote nodes in the
same place like local node - when calling backup().
Introduce backup_locally() which calls only
local backup if needed.
Remote backup is now trigerred by LCK_VG_BACKUP flag
combination (special VG lock).
This lock type will call check_current_backup()
(including backup_locally() call) and updates
metadata on all nodes.
(Patch fixes non-functional remote backup,
current call during VG lock never triggers.)
- Rename unlock_all to destroy_lvhash,
this function is called in cluster shutdown
unlocks everything and clean up allocated info space.
- Tidy lv_hash_lock use
.
Except adding free(lvi) in lv_has destructror
there is no functional change.
(for example when CLVMD_CMD_LOCK_VG for is called during vgscan).
If clvmd calls LV lock, it calls
/* clean the pool for another command */
dm_pool_empty(cmd->mem);
to clean up memory pool after command.
Unfortunately, do_refresh_cache() do not call this
and because during it operation it allocates some memory,
the pool increases.
Also do_refresh_cache should use lvm_lock
(it manipulates with lvm internal data).
The same applies for lvm_backup command.
Signed-off-by: Milan Broz <mbroz@redhat.com>
Very simple / crude method of removing 'is_static' from initialization.
Why should we require an application tell us whether it is linked
statically or dynamically to libLVM? If the application is linked
statically, but libraries exist and dlopen() calls succeed, why
do we care if it's statically linked?
This allows us to remove one argument from create_toolcontext() and
moves it closer to a generic library init function.
In the arg_*() functions, we just use _the_args() directly.
For now we leave the first parameter to these
arg_*() functions (struct cmd_context *) because
of the number of files involved in removing the
parameter.
Very similar argument to removal of init_debug() and other calls.
create_toolcontext() calls _process_config() which sets
cmd->default_settings.activation, then calls
set_activation(cmd->default_settings.activation). Later, create_toolcontext()
sets cmd->current_settings = cmd->default_settings. So these calls
set_activation(cmd->current_settings.activation) are redundant.
Identical argument to previous patch which removed archive_enable() calls.
We add a new parameter to backup_init() which sets the enable value based
on the cmd->default_settings.backup value. This value was used to set
cmd->current_settings.backup, used in the removed backup_enable() call.
