IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
We cast (char*) to (uint32_t*) that changes alignment requierements.
For our case the code has been correct as alloca() returns properly
aligned buffer, however this patch make it cleaner and more readable
and avoids warning generation.
A merged snapshot's DM device is made to use the "error" target as part
of lvm's transaction to merge a snapshot. This snapshot merge use-case
aside, any device using the error target shouldn't be scanned.
Problem:
When both legs of a mirrored log fail, neither the log nor the parent
mirror can proceed. The repair code must be careful to replace the
log with an error target before operating on the parent - otherwise,
the parent can get stuck trying to suspend because it can't push through
any writes. The steps to replace the log device with an error target
were incomplete and resulted in the replacement not happening at all!
The code originally had all the necessary logic to complete the
replacement task, but was pulled out in a effort to clean-up that
section of code, while fixing another bug:
<offending commit msg>
In addition, I added following three changes.
- Removed tmp_orphan_lvs handling procedure
It seems that _delete_lv() can handle detached_log_lv properly
without adding mirror legs in mirrored log to tmp_orphan_lvs.
Therefore, I removed the procedure.
- Removed vg_write()/vg_commit()
Metadata is saved by vg_write()/vg_commit() just after detached_log_lv
is handled. Therefore, I removed vg_write()/vg_commit().
</offending commit msg>
http://sources.redhat.com/cgi-bin/cvsweb.cgi/LVM2/lib/metadata/mirror.c?cvsroot=lvm2&f=h#rev1.130
I've reverted the "clean-up" changes associated with that fix, but not what
that commit was actually fixing.
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Reviewed-by: Petr Rockai <prockai@redhat.com>
page.
Add ->target_name to segtype_handler to allow a more specific target
name to be returned based on the state of the segment.
Result of trying to merge a snapshot using a kernel that doesn't have
the snapshot-merge target:
Before:
# lvconvert --merge vg/snap
Can't expand LV lv: snapshot target support missing from kernel?
Failed to suspend origin lv
After:
# lvconvert --merge vg/snap
Can't process LV lv: snapshot-merge target support missing from kernel?
Failed to suspend origin lv
Unable to merge LV "snap" into it's origin.
Try to distinguish between the case of using interactive shell and non
interactive running - different combinations of '-y' and '-p' option
needs to be used for fsck.
Update the way how fsadm detects mounted filesystem.
With udev /dev/dm-XXX paths are now returned - but mount or /proc/mounts
prints names in form of /dev/mapper/vg-lv - so the match was not found.
Fixex RHBZ #638050.
Current solution uses same trick as mount and detects vg-lv name through
/sys where available - this should be reasonable safe.
Instead of calling mount without parameter to get actual mount table,
switch to use /proc/mounts directly.
Fix missing 'dry' execution of lvresize - fixing problem where resize
command were 'dry-run' executed - but lvresize has been executed for real.
Also adapt code slightly to support better recursive execution of fsadm
through lvresize call.
Under certain conditions it was possible to break (^C) fsadm before actually
resizing filesystem, but lvresize which executed fsadm will think resize
was succesful and shrinks partitions with unresized filesystem on it.
Fix by returning error (1) for this case - this stops lvresize from futher
proceding in resize operation.
In other LVM memory structures such as volume_group, the field
used to store flags is called "status", and on-disk fields are called
'flags', so rename the one inside metadata_area to be consistent.
Not only is it more consistent with existing code but is cleaner
to say "the status of this mda is ignored".
Background for this patch - prajnoha pinged me on IRC this morning
about a fix he was working on related to metadataignore when
metadata/dirs was set. I was reviewing my patches from this year
and realized the 'flags' field was probably not the best choice
when I originally did the metadataignore patches.
Current lvm1 allocation code seems to not properly
map segments on missing PVs.
For now disable this functionality.
(It never worked and previous commit just introduced segfault here.)
So the partial mode in lvm1 can only process missing PVs
with no LV segments only.
Also do not use random PV UUID for missing part but use fixed
string derived from VG UUID (to not confuse clvmd tests).
Read complete content of /proc/self/maps into one buffer without
realocation in the middle of reading and before doing any m/unlock
operation with these lines - as some of them gets change.
With previous implementation we've read some mappings twice ([stack])
If some lvm1 device is missing, lvm fails on all operations
# vgcfgbackup -f bck -P vg_test
Partial mode. Incomplete volume groups will be activated read-only.
3 PV(s) found for VG vg_test: expected 4
PV segment VG free_count mismatch: 152599 != 228909
PV segment VG extent_count mismatch: 152600 != 228910
Internal error: PV segments corrupted in vg_test.
Volume group "vg_test" not found
Allow loading of lvm1 partial VG by allocating "new" missing PV,
which covers lost space. Also this fake mising PV inform code
that it is partial VG.
https://bugzilla.redhat.com/show_bug.cgi?id=501390
Revert to old glibc behaviour for vsnprintf used in emit_to_buffer fn.
Otherwise, the check that follows would be wrong for new glibc versions.
This caused the rh bug #633033 to be undetected and pass throught the check,
corrupting the metadata!
In certain configurations, we're not under a VG rw lock while trying to write
a new archive file with VG metadata. A common example is using "vgs" while
having the content of backup and archive directories empty. The code scans the
content of these directories and tries to determine the final index that should
be used in archive name. Since we're not under a lock, we can get into a race
while choosing the index which could end up showing errors about not being able
to rename to final archive name. Let's add random number suffix to these archive
file names so we can avoid the race.
For example, when using '--config "backup { ... }"' line, the values from
lvm.conf (or default values) should be overridden. This patch adds
reinitialisation of archive and backup handling on toolcontext refresh
which makes these settings to be applied.
can be opprobriously slow if created with '--nosync'.
One of the ways cluster mirrors coordinate I/O and recovery
amoung the different machines is by the use of the log
function 'is_remote_recovering()' which lets nodes know if
a region they wish to perform a write on is currently being
recovered on another node. If the region is being recovered,
the I/O is delayed.
The 'is_remote_recovering' routine has been optimized to
avoid the deluge of requests that would be issued to the
userspace log server by maintaining a marker of how far
the recovery has gotten. It can then immediately return
'not recovering' if the region being inquired about is
less than this mark. Additionally, if the region of
concern is greater than the mark, the function will
limit the number of transmissions to userspace by assuming
the region /is/ being recovered when skipping the
transmission. This limits the amount of processing
and updates the mark in 1/4 sec time steps.
This patch fixes a problem where 'the mark' is not being
updated because of faulty logic in the userspace log
daemon. When '--nosync' is used to create a cluster
mirror, the userspace log daemon never has a chance
to update the mark in the normal way. The fix is to set
the mark to "complete" if the mirror was created with
the --nosync flag.
may never complete.
If you convert from a linear to a mirror and then convert that
mirror back to linear /while/ the previous (up)convert is
taking place, the mirror polling process will never complete.
This is because the function that polls the mirror for
completion doesn't check if it is still polling a mirror and
the copy_percent that it gets back from the linear device is
certainly never 100%.
The fix is simply to check if the daemon is still looking at
a mirror device - if not, return PROGRESS_CHECK_FAILED.
The user sees the following output from the first (up)convert
if someone else sneaks in and does a down-convert shortly
after their convert:
[root@bp-01 ~]# lvconvert -m1 vg/lv
vg/lv: Converted: 43.4%
ABORTING: Mirror percentage check failed.
to block when a mirror under a snapshot suffers a failure.
The problem has to do with label scanning. When a mirror suffers
a failure, the kernel blocks I/O to prevent corruption. When
LVM attempts to repair the mirror, it scans the devices on the
system for LVM labels. While mirrors are skipped during this
scanning process, snapshot-origins are not. When the origin is
scanned, it kicks up I/O to the mirror (which is blocked)
underneath - causing the label scan (an thus the repair operation)
to hang.
This patch simply bypasses snapshot-origin devices when doing
labels scans (while ignore_suspended_devices() is set). This
fixes the issue.
introduced in commit b16b4d92a7bd80b61b85c5db857173a8f0567374
"Improve various log messages."
fixes a lot of
../include/metadata.h:148: warning: type qualifiers ignored on function return type
set appropriate Required-Start and Required-Stop at configure time.
Reorder the checks for user selected cluster managers to match auto
detected ones, to be consistent in the output.
Add special case for qdiskd that´s started after cman/lock_gulmd for
RHEL-4/RHEL-5.
If pvmove crashed and metadata contains pvmove LV
but without miorrored segments, pvmove --abort
will not repair the situation (and finish wth success!).
Fix it by allowing metadata update if aborting
(thus removing pvmove LV) even if no moved LVs detected.
(Tested on real metadata provided by an lvm user:-)
