IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Currently lvm2app properties have the following structure:
typedef struct lvm_property_value {
uint32_t is_settable:1;
uint32_t is_string:1;
uint32_t is_integer:1;
uint32_t is_valid:1;
uint32_t padding:28;
union {
const char *string;
uint64_t integer;
} value;
} lvm_property_value_t;
which assumes that numerical values were in the range of 0 to 2**64-1. However,
some of the properties were 'signed', like LV major/minor numbers and some
reserved values for properties that represent percentages. Thus when the
values were retrieved they were in two's complement notation. So for a -1
major number the API user would get a value of 18446744073709551615. The
API user could cast the returned value to an int64_t to handle this, but that
requires the API developer to look at the source code and determine when it
should be done.
This change modifies the return property structure to:
typedef struct lvm_property_value {
uint32_t is_settable:1;
uint32_t is_string:1;
uint32_t is_integer:1;
uint32_t is_valid:1;
uint32_t is_signed:1;
uint32_t padding:27;
union {
const char *string;
uint64_t integer;
int64_t signed_integer;
} value;
} lvm_property_value_t;
With this addition the API user can interrogate that the value is numerical,
(is_integer = 1) and subsequently check if it's signed (is_signed = 1) too.
If signed, then the API developer should use the union's signed_integer to
avoid casting.
This change maintains backwards compatibility as the structure size remains
unchanged and integer value remains unchanged. Only the additional bit
taken from the pad is utilized.
Bugzilla reference:
https://bugzilla.redhat.com/show_bug.cgi?id=838257
Signed-off-by: Tony Asleson <tasleson@redhat.com>
Show full chain of ancestors and descendants for snapshots
(both thick and thin - in case of thick, the "ancestor" field
is actually equal to "origin" field as snapshots can't be
chained for thick snapshots).
These fields display current state as it is, they do not
display any history! If the snapshot chain is broken in
the middle, we don't report the historical origin (this
is going to be a part of another patch and a different
set of fields or just a switch for existing fields to
show ancestors and descendants with history included).
For example:
(origin --> snapshot)
lvol1 --> lvol2 --> lvol3 --> lvol4
\
--> lvol5 --> lvol6 --> lvol7 --> lvol8
$ lvs -o name,pool_lv,origin,ancestors,descendants vg
LV Pool Origin Ancestors Descendants
lvol1 pool lvol2,lvol3,lvol4,lvol5,lvol6,lvol7,lvol8
lvol2 pool lvol1 lvol1 lvol3,lvol4,lvol5,lvol6,lvol7,lvol8
lvol3 pool lvol2 lvol2,lvol1 lvol4
lvol4 pool lvol3 lvol3,lvol2,lvol1
lvol5 pool lvol2 lvol2,lvol1 lvol6,lvol7,lvol8
lvol6 pool lvol5 lvol5,lvol2,lvol1 lvol7,lvol8
lvol7 pool lvol6 lvol6,lvol5,lvol2,lvol1 lvol8
lvol8 pool lvol7 lvol7,lvol6,lvol5,lvol2,lvol1
Scenario:
$ vgs -o+vg_mda_copies
VG #PV #LV #SN Attr VSize VFree #VMdaCps
fedora 1 2 0 wz--n- 9.51g 0 unmanaged
vg 16 9 0 wz--n- 1.94g 1.83g 2
$ lvs -o+read_ahead vg/lvol6 vg/lvol7
LV VG Attr LSize Pool Origin Data% Rahead
lvol6 vg Vwi-a-tz-- 1.00g pool lvol5 0.00 auto
lvol7 vg Vwi---tz-k 1.00g pool lvol6 256.00k
Before this patch:
$vgs -o vg_name,vg_mda_copies -S 'vg_mda_copies < unmanaged'
VG #VMdaCps
vg 2
Problem:
Reserved values can be only used with exact match = or !=, not <,<=,>,>=.
In the example above, the "unamanaged" is internally represented as
18446744073709551615, but this should be ignored while not comparing
field directly with "unmanaged" reserved name with = or !=. Users
should not be aware of this internal mapping of the reserved value
name to its internal value and hence it doesn't make sense for such
reserved value to take place in results of <,<=,> and >=.
There's no order defined for reserved values!!! It's a special
*reserved* value that is taken out of the usual value range
of that type.
This is very similar to what we have already fixed with
2f7f6932dc, but it's the other way round
now - we're using reserved value name in selection criteria now
(in the patch 2f7f693, we had concrete value and we compared it
with the reserved value). So this patch completes patch 2f7f693.
This patch also fixes this problem:
$ lvs -o+read_ahead vg/lvol6 vg/lvol7 -S 'read_ahead > 32k'
LV VG Attr LSize Pool Origin Data% Rahead
lvol6 vg Vwi-a-tz-- 1.00g pool lvol5 0.00 auto
lvol7 vg Vwi---tz-k 1.00g pool lvol6 256.00k
Problem:
In the example above, the internal reserved value "auto" is in the
range of selection "> 32k" - it shouldn't match as well. Here the
"auto" is internally represented as MAX_DBL and of course, numerically,
MAX_DBL > 256k. But for users, the reserved value should be uncomparable
to any number so the mapping of the reserved value name to its interna
value is transparent to users. Again, there's no order defined for
reserved values and hence it should never match if using <,<=,>,>=
operators.
This is actually exactly the same problem as already described in
2f7f6932dc, but that patch failed for
size field types because of incorrect internal representation used.
With this patch applied, both problematic scenarios mentioned
above are fixed now:
$ vgs -o vg_name,vg_mda_copies -S 'vg_mda_copies < unmanaged'
(blank)
$ lvs -o+read_ahead vg/lvol6 vg/lvol7 -S 'read_ahead > 32k'
LV VG Attr LSize Pool Origin Rahead
lvol7 vg Vwi---tz-k 1.00g pool lvol6 256.00k
The seg_monitor did not display monitored status for thick snapshots
and mirrors (with mirror log *not* mirrored). The seg monitor did work
correctly even before for other segtypes - thins and raids.
Before (mirrors and snapshots, only mirrors with mirrored log properly displayed monitoring status):
[0] f21/~ # lvs -a -o lv_name,lv_layout,lv_role,seg_monitor vg
LV Layout Role Monitor
mirror mirror public
[mirror_mimage_0] linear private,mirror,image
[mirror_mimage_1] linear private,mirror,image
[mirror_mlog] linear private,mirror,log
mirror_with_mirror_log mirror public monitored
[mirror_with_mirror_log_mimage_0] linear private,mirror,image
[mirror_with_mirror_log_mimage_1] linear private,mirror,image
[mirror_with_mirror_log_mlog] mirror private,mirror,log monitored
[mirror_with_mirror_log_mlog_mimage_0] linear private,mirror,image
[mirror_with_mirror_log_mlog_mimage_1] linear private,mirror,image
thick_origin linear public,origin,thickorigin
thick_snapshot linear public,snapshot,thicksnapshot
With this patch applied (monitoring status displayed for all mirrors and snapshots):
[0] f21/~ # lvs -a -o lv_name,lv_layout,lv_role,seg_monitor vg
LV Layout Role Monitor
mirror mirror public monitored
[mirror_mimage_0] linear private,mirror,image
[mirror_mimage_1] linear private,mirror,image
[mirror_mlog] linear private,mirror,log
mirror_with_mirror_log mirror public monitored
[mirror_with_mirror_log_mimage_0] linear private,mirror,image
[mirror_with_mirror_log_mimage_1] linear private,mirror,image
[mirror_with_mirror_log_mlog] mirror private,mirror,log monitored
[mirror_with_mirror_log_mlog_mimage_0] linear private,mirror,image
[mirror_with_mirror_log_mlog_mimage_1] linear private,mirror,image
thick_origin linear public,origin,thickorigin
thick_snapshot linear public,snapshot,thicksnapshot monitored
Move the lvm1 sys ID into vg->lvm1_system_id and reenable the #if 0
LVM1 code. Still display the new-style system ID in the same
reporting field, though, as only one can be set.
Add a format feature flag FMT_SYSTEM_ON_PVS for LVM1 and disallow
access to LVM1 VGs if a new-style system ID has been set.
Treat the new vg->system_id as const.
It's cleaner this way - do not mix static and dynamic
(init_processing_handle) initializers. Use the dynamic one everywhere.
This makes it easier to manage the code - there are no "exceptions"
then and we don't need to take care about two ways of initializing the
same thing - just use one common initializer throughout and it's clear.
Also, add more comments, mainly in the report_for_selection fn explaining
what is being done and why with respect to the processing_handle and
selection_handle.
This makes a difference when using selection criteria based on
these fields - if those fields are defined as DM_REPORT_FIELD_TYPE_SIZE
(in contrast to DM_REPORT_FIELD_TYPE_NUMBER), units are also
recognize in selection clause.
For example:
$ lvs -o+seg_start vg1/lv2
LV VG Attr LSize Start
lv2 vg1 -wi-a----- 12.00m 0
lv2 vg1 -wi-a----- 12.00m 8.00m
Before this patch:
$ lvs -o+seg_start --select 'seg_start=8m'
Found size unit specifier but numeric value expected for selection field seg_start.
Selection syntax error at 'seg_start=8m'.
Use 'help' for selection to get more help.
With this patch applied:
$lvs -o+seg_start --select 'seg_start=8m'
LV VG Attr LSize Start
lv2 vg1 -wi-a----- 12.00m 8.00m
(the same applies for ba_start and vg_free fields)
The report_for_selection does the actual "reporting for selection only".
The selection status will be saved in struct selection_handle's "selected"
variable.
The new "report_init_for_selection" is just a wrapper over
dm_report_init_with_selection that initializes reporting for selection
only. This means we're not going to do the actual reporting to output
for display and as such we intialize reporting as if no fields are reported
or sorted. The only fields "reported" are taken from the selection criteria
string and all such fields are marked as hidden automatically (FLD_HIDDEN flag).
These fields are used solely for selection criteria matching.
Also, modify existing report_object function that was used for reporting to
output for display. Now, it can either cause reporting to output or reporting
for selection only. The selection result is stored in struct selection_handle's
"selected" variable which can be handled further by any report_object caller.
This patch replaces "void *handle" with "struct processing_handle *handle"
in process_each_*, process_single_* and related functions.
The struct processing_handle consists of two handles inside now:
- the "struct selection_handle *selection_handle" used for
applying selection criteria while processing process_each_*,
process_single_* and related functions (patches using this
logic will follow)
- the "void* custom_handle" (this is actually the original handle
used before this patch - a pointer to custom data passed into
process_each_*, process_single_* and related functions).
LVSINFO, LVSSTATUS and LVSINFOSTATUS is the same as LVS, just with some
extra info/status decoration attached to it. Recognize this when looking
for properties for lvm2app. This fixes lvm_lv_get_property lvm2app call
for fields which already use LVS{INFO,STATUS,INFOSTATUS} - currently,
this is lv_attr field which was converted to LVSINFOSTATUS from
pure LVS type.
Rename original lv_error_when_full field to lv_when_full and also
convert it from binary field to string field displaying three
possible values: "error", "queueu" or "" (blank for undefined).
$ lvs vg/pool vg/pool1 vg/linear_lv -o+lv_when_full
LV VG Attr LSize Data% Meta% WhenFull
linear_lv vg -wi-a----- 4.00m
pool vg twi-aotz-- 4.00m 0.00 0.98 queue
pool1 vg twi-a-tz-- 4.00m 0.00 0.88 error
For -S|--select these synonyms are recognized:
"error" -> "error when full", "error if no space"
"queue" -> "queue when full", "queue if no space"
"" -> "undefined"
Add separate LVSINFOSTATUS field type for fields which display both
dm info-like and dm status-like information.
The internal interface is there with the introduction of LVSSTATUS
field type which can cope with the combination of LVSSTATUS
and LVSINFO field types (several fields).
However, till now, we considered that *single* field can display
either LVSINFO or LVSSTATUS, but not both at the same time.
Till now, we haven't had single field which needs both - hence
add LVSINFOSTATUS field type for such fields as we currently
need this for the lv_attr field which requires combination of
info and status.
This patch just adds interface for an ability to register such fields
(the code that copes with this is already in).
Recently the single 'status' code has been used for number of cache
features.
Extend the API a little bit to allow usage also for lv_attr_dup.
As the function itself is used in lvm2api - add a new function:
lv_attr_dup_with_info_and_seg_status() that is able to use
grabbed info & status information.
report_init() is now using directly passed lvdm struct pointer
which holds the infomation whether lv_info() was correctly obtained or
there was some error when trying to read it.
Move 'healt' attribute to status.
TODO convert raid function to use the already known status.
Support error_if_no_space feature for thin pools.
Report more info about thinpool status:
(out_of_data (D), metadata_read_only (M), failed (F) also as health
attribute.)
API for seg reporting is breaking internal lvm coding - it cannot
use vgmem mem pool for allocation of reported value.
So use separate pool instead of 'vgmem' for non vg related allocations
Add consts for many function params - but still many other are left
for now as non-const - needs deeper level of change even on libdm side.
Since GET_FIELD_RESERVED_VALUE always returns a pointer, don't reference
it with "&" when used - we already have that pointer value (this is an
addendum to recent commit 028ff30947).
Only GET_TYPE_RESERVED_VALUE needs to be referenced with "&" as it
returns directly the value of that type.
We have to use empty list, not NULL if we want to denote that the list
has no items. Otherwise, the code further can segfault as it expects
there's always a sane value (= some list), including empty list,
but never NULL.
Use helper macros to handle reserved values and also define "undefined"
reserved value as:
FIELD_RESERVED_VALUE(cache_policy, cache_policy_undef, "", "", "undefined")
Which means:
- print "" if the cache_policy value is undefined (the first name for this reserved value is "")
- recognize "undefined" reserved name as synonym to ""
(so statements like "lvs -S cache_policy=undefined" are still recognized)
Avoid making a copy of the keyword which is already registered in
values.h for "unmanaged" (vg_mda_copies field) and "auto" reserved
value (lv_read_ahead field). Also use helper macros to handle these
reserved - this is the correct approach - just do not copy the same
thing again and do not mix it! The GET_FIELD_RESERVED_VALUE and
GET_FIRST_RESERVED_NAME macros guarantees this - use it!
In addition to that, rename reserved values:
vg_mda_copies --> vg_mda_copies_unmanaged
lv_read_ahead --> lv_read_ahead_auto
So the field reserved values follows this scheme:
"<field_name>_<reserved_value_name>".
The same applies for type reserved values with this scheme:
"<report type name in lowercase>_<reserved_value_name>"
Add a comment about this scheme for others to follow as well
when adding new fields and their reserved values. This makes
it a bit easier to read the code then.
RESERVED(id) --> GET_TYPE_RESERVED_VALUE(id)
FIRST_NAME(id) --> GET_FIRST_RESERVED_NAME(id)
Also add GET_FIELD_RESERVED_VALUE(id) macro to get per-field reserved value.
This makes it much more readable and hopefully it'll make it
easier to use these helper macros when adding new reporting
fields with reserved values if needed.
The cache policy name taken as LV segment property must be duped
for report as the VG/LV/seg structure is destroyed after processing,
reporting happens later:
$ valgrind lvs -o+cache_policy
...
==16589== Invalid read of size 1
==16589== at 0x54ABCC3: dm_report_compact_fields
(libdm-report.c:1739)
==16589== by 0x153FC7: _report (reporter.c:619)
==16589== by 0x1540A6: lvs (reporter.c:641)
==16589== by 0x148021: lvm_run_command (lvmcmdline.c:1452)
==16589== by 0x1495CB: lvm2_main (lvmcmdline.c:1907)
==16589== by 0x164712: main (lvm.c:21)
==16589== Address 0x7d465f2 is 8,338 bytes inside a block of size
16,384 free'd
==16589== at 0x4C2ACE9: free (in
/usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==16589== by 0x54B8C85: _free_chunk (pool-fast.c:318)
==16589== by 0x54B84FB: dm_pool_destroy (pool-fast.c:78)
==16589== by 0x1E59C7: _free_vg (vg.c:78)
==16589== by 0x1E5A6D: release_vg (vg.c:95)
==16589== by 0x159B6E: _process_lv_vgnameid_list (toollib.c:1967)
==16589== by 0x159DD7: process_each_lv (toollib.c:2030)
==16589== by 0x153ED8: _report (reporter.c:598)
==16589== by 0x1540A6: lvs (reporter.c:641)
==16589== by 0x148021: lvm_run_command (lvmcmdline.c:1452)
==16589== by 0x1495CB: lvm2_main (lvmcmdline.c:1907)
==16589== by 0x164712: main (lvm.c:21)
Similar to LVSINFO type which gathers LV + its DM_DEVICE_INFO, the
new LVSSTATUS/SEGSSTATUS report type will gather LV/segment + its
DM_DEVICE_STATUS.
Since we can report status only for certain segment, in case
of LVSSTATUS we need to choose which segment related to the LV
should be processed that represents the "LV status". In case of
SEGSSTATUS type it's clear - the status is reported for the
segment just processed.
The former struct lv_with_info is renamed to lv_with_info_and_seg_status as it can
hold more than just "info", there's lv's segment status now in addition:
struct lv_with_info_and_seg_status {
struct logical_volume *lv;
struct lvinfo *info;
struct lv_seg_status *seg_status;
}
Where struct lv_seg_status is:
struct lv_seg_status {
struct dm_pool *mem;
struct lv_segment lv_seg;
lv_seg_status_type_t type;
void *status; /* struct dm_status_* */
}
Where lv_seg points to lv's segment that is being reported or
processed in general.
New struct lv_seg_status keeps the information about segment status -
the status retrieved via DM_DEVICE_STATUS ioctl. This information will
be used for reporting dm device target status for the LV segment
specified.
So this patch introduces third level of LV information that is
kept for reuse while reporting fields within one reporting line,
causing only one DM_DEVICE_STATUS ioctl call per LV segment line
reported (otherwise we'd need to call the DM_DEVICE_STATUS for each
segment status field in one LV segment/reporting line which is not
efficient).
This is following exactly the same principle as already introduced
by commit ecb2be5d16.
So currently we have three levels of information that can be used
to report an LV/LV segment:
- LV metadata itself (struct logical_volume *lv)
- LV's DM_DEVICE_INFO ioctl result (struct lvinfo *info)
- LV's segment DM_DEVICE_STATUS ioctl result (this status must be
bound to a segment, not the whole LV as the whole LV may be
composed of several segments of course)
(this is the new struct lv_seg_status *seg_status)
Show some stats with 'lvs'
Display same info for active cache volume and cache-pool.
data% - #used cache blocks/#total cache blocks
meta% - #used metadata blocks/#total metadata blocks
copy% - #dirty/#used cache blocks
TODO: maybe there is a better mapping
- should be seen as first-try-and-see.
Use new libdm macro DM_LIST_HEAD_INIT().
Embeded 'free' segment type (so it's not needed in the list)
Drop assignments of 0,NULL since they are defaults.
Instead of segtype->ops->name() introduce lvseg_name().
This also allows us to leave name() function 'empty' for default
return of segtype->name.
TODO: add functions for rest of ops->
There was a bug in value and their synonym definition for these two fields
causing selections on these fields to not work correctly - nothing matched
against vg/lv_permissions fields even if selection criteria should have
matched.
Scenario:
$ lvs -o name,lv_permissions vg
LV LPerms
lvol0 read-only
lvol1 writeable
Before this patch:
$ lvs -o name,lv_permissions vg -S 'permissions=read-only'
(blank)
$ lvs -o name,lv_permissions vg -S 'permissions=writeable
(blank)
With this patch applied:
$ lvs -o name,lv_permissions vg -S 'permissions=read-only'
LV LPerms
lvol0 read-only
$ lvs -o name,lv_permissions vg -S 'permissions=writeable'
LV LPerms
lvol1 writeable
Also synonyms match correctly now:
$ lvs -o name,lv_permissions vg -S 'permissions=rw'
LV LPerms
lvol1 writeable
Process PVs by iterating through VGs, then iterating through
devices if the command needs to process non-PV devices.
The process_single function can always use the VG and PV args.
[Committed by agk with cosmetic changes and tweaks.]
The cache mode of a new cache pool is always explicitly
included in the vg metadata. If a cache mode is not
specified on the command line, the cache mode is taken
from lvm.conf allocation/cache_pool_cachemode, which
defaults to "writethrough".
The cache mode can be displayed with lvs -o+cachemode.
Try to enforce consistent macro usage along these lines:
lv_is_mirror - mirror that uses the original dm-raid1 implementation
(segment type "mirror")
lv_is_mirror_type - also includes internal mirror image and log LVs
lv_is_raid - raid volume that uses the new dm-raid implementation
(segment type "raid")
lv_is_raid_type - also includes internal raid image / log / metadata LVs
lv_is_mirrored - LV is mirrored using either kernel implementation
(excludes non-mirror modes like raid5 etc.)
lv_is_pvmove - internal pvmove volume
Use lv_is_* macros throughout the code base, introducing
lv_is_pvmove, lv_is_locked, lv_is_converting and lv_is_merging.
lv_is_mirror_type no longer includes pvmove.
