IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Report CMFmt column with cache metadata format version.
Report KMFmt column with 'kernel cache metadata format version' for device.
(a value reported from status).
(Update 'CacheMode' to name 'Cache' as primary segtype).
To more easily recognize unselected state from select '0' state
add new 'THIN_ZERO_UNSELECTED' enum.
Same applies to THIN_DISCARDS_UNSELECTED.
For those we no longer need to use PASS_ARG_ZERO or PASS_ARG_DISCARDS.
Commit 48778bc503 introduced new RAID reshaping related report fields.
The inclusioon of segtype.h in properties.c isn't mandatory, remove it.
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
During an ongoing reshape, the MD kernel runtime reads stripes relative
to data_offset and starts storing the reshaped stripes (with new raid
layout and/or new stripesize and/or new number of stripes) relative
to new_data_offset. This is to avoid writing over any data in place
which is non-atomic by nature and thus be recoverable without data loss
in the transition. MD uses the term out-of-place reshaping for it.
There's 2 other areas we don't have report capability for:
- number of data stripes vs. total stripes
(e.g. raid6 with 7 stripes toal has 5 data stripes)
- number of (rotating) parity/syndrome chunks
(e.g. raid6 with 7 stripes toal has 2 parity chunks; one
per stripe for P-Syndrome and another one for Q-Syndrome)
Thus, add the following reportable keys:
- reshape_len (in current units)
- reshape_len_le (in logical extents)
- data_offset (in sectors)
- new_data_offset ( " )
- data_stripes
- parity_chunks
Enhance lvchange-raid.sh, lvconvert-raid-reshape-linear_to_striped.sh,
lvconvert-raid-reshape-striped_to_linear.sh, lvconvert-raid-reshape.sh
and lvconvert-raid-takeover.sh to make use of new keys.
Related: rhbz834579
Related: rhbz1191935
Related: rhbz1191978
When there are duplicate devices for a PV, one device
is preferred and chosen to exist in the VG. The other
devices are not used by lvm, but are displayed by pvs
with a new PV attr "d", indicating that they are
unchosen duplicate PVs.
The "duplicate" reporting field is set to "duplicate"
when the PV is an unchosen duplicate, and that field
is blank for the chosen PV.
Specifying an output width of 0 now leads to a default minimum width
taken from the width of the column heading. (Most fields should use
this.)
Components of field names are generally separated by underscores (which
are optional at run-time). (Dropped 3 duplicate fields now covered by
this rule.)
Each field heading must be unique and generally doesn't have spaces
between words (which get capitalised) unless they are already short and
the fields are normally longer or clarity demands it.
The lv_full_ancestors reporting field is just like the existing
lv_ancestors field but it also takes into account any history and
indirect relations recorded.
The lv_historical reporting field is a simple binary field that reports
whether an LV is historical one ("historical" value or value of "1" displayed)
or not (blank string "" or value of "0" displayed).
Pair kernel_cache_settings with kernel_cache_policy.
There is very small chance in error case that the value in table
might be differnet from the value stored in metadata
so make it 'checkable'.
Fix reporting of Fail thin-pool target status
as attr[8] letter 'F'.
Report 'needs_check' status from thin-pool target via
attr field [4] (letter 'c'/'C'), and also via CheckNeeded field.
TODO: think about better name here?
TODO: lots of prop_not_implemented_set
For example:
$ pvs -o pv_name,vg_name,pv_in_use
PV VG InUse
/dev/sda vg used
/dev/sdb
/dev/sdc used
(sda is part of vg - it's used
sdb is not part of vg - it's not used
sdc is part of vg, but MDAs missing - it's used)
The associated devices,metadata_devices,seg_pe_ranges and
seg_metadata_le_ranges are reported as genuine string lists now.
This allows for using the items separately in -S|--select
(so searching for subsets etc.) and also it allows for
configuring the separator using report/list_item_separator
which may be useful in scripts (however, we'll enable this
only for seg_le_metadata_ranges and not for devices,seg_pe_ranges
and seg_metadata_devices for compatibility reasons - see following
patch).
Existing cache_settings field displays the settings which are
saved in metadata. Add new kernel_cache_settings fields to display
the settings which are currently used by kernel, including fields
for which default values are used.
This way users have complete view of the set of cache settings
supported (and which they can set) and their values which are used
at the moment by kernel.
For example:
$ lvs -o name,cache_policy,cache_settings,kernel_cache_settings vg
LV Cache Policy Cache Settings KCache Settings
cached1 mq migration_threshold=1024,write_promote_adjustment=2 migration_threshold=1024,random_threshold=4,sequential_threshold=512,discard_promote_adjustment=1,read_promote_adjustment=4,write_promote_adjustment=2
cached2 smq migration_threshold=1024 migration_threshold=1024
cached3 smq migration_threshold=2048
Thin pool discard mode set in metadata can be different from the one
actually used if any device underneath does not support that mode. Add
kernel_discard report field to make it possible to see this difference.
We already have pv_count to report number of PVs that a VG has based
on metadata.
This patch exposes the information about how many of these PVs are
missing which is also useful information for a VG. Wwe could count
the sum of pv_missing reporting fields for each PV in the VG before,
but the new field is practical when reporting VG as a whole and there's
no need to process each PV from VG alone.
Add metadata_devices and seg_metadata_le_ranges report fields.
Currently only defined for raid, but should probably be extended
to all other segment types that don't report all their device
usage in the 'devices' field.
Make it possible to define format for time that is displayed.
The way the format is defined is equal to the way that is used
for strftime function, although not all formatting options as
used in strftime are available for LVM2 - the set is restricted
(e.g. we do not allow newline to be printed). The lvm.conf
comments contain the whole list that LVM2 accepts for time format
together with brief description (copied from strftime man page).
For example:
(defaults used - the format is the same as used before this patch)
$ lvs -o+time vg/lvol0 vg/lvol1
LV VG Attr LSize Time
lvol0 vg -wi-a----- 4.00m 2015-06-25 16:18:34 +0200
lvol1 vg -wi-a----- 4.00m 2015-06-29 09:17:11 +0200
(using 'time_format = "@%s"' in lvm.conf - number of seconds
since the Epoch)
$ lvs -o+time vg/lvol0 vg/lvol1
LV VG Attr LSize Time
lvol0 vg -wi-a----- 4.00m @1435241914
lvol1 vg -wi-a----- 4.00m @1435562231
Currently lvm2app properties have the following structure:
typedef struct lvm_property_value {
uint32_t is_settable:1;
uint32_t is_string:1;
uint32_t is_integer:1;
uint32_t is_valid:1;
uint32_t padding:28;
union {
const char *string;
uint64_t integer;
} value;
} lvm_property_value_t;
which assumes that numerical values were in the range of 0 to 2**64-1. However,
some of the properties were 'signed', like LV major/minor numbers and some
reserved values for properties that represent percentages. Thus when the
values were retrieved they were in two's complement notation. So for a -1
major number the API user would get a value of 18446744073709551615. The
API user could cast the returned value to an int64_t to handle this, but that
requires the API developer to look at the source code and determine when it
should be done.
This change modifies the return property structure to:
typedef struct lvm_property_value {
uint32_t is_settable:1;
uint32_t is_string:1;
uint32_t is_integer:1;
uint32_t is_valid:1;
uint32_t is_signed:1;
uint32_t padding:27;
union {
const char *string;
uint64_t integer;
int64_t signed_integer;
} value;
} lvm_property_value_t;
With this addition the API user can interrogate that the value is numerical,
(is_integer = 1) and subsequently check if it's signed (is_signed = 1) too.
If signed, then the API developer should use the union's signed_integer to
avoid casting.
This change maintains backwards compatibility as the structure size remains
unchanged and integer value remains unchanged. Only the additional bit
taken from the pad is utilized.
Bugzilla reference:
https://bugzilla.redhat.com/show_bug.cgi?id=838257
Signed-off-by: Tony Asleson <tasleson@redhat.com>
Show full chain of ancestors and descendants for snapshots
(both thick and thin - in case of thick, the "ancestor" field
is actually equal to "origin" field as snapshots can't be
chained for thick snapshots).
These fields display current state as it is, they do not
display any history! If the snapshot chain is broken in
the middle, we don't report the historical origin (this
is going to be a part of another patch and a different
set of fields or just a switch for existing fields to
show ancestors and descendants with history included).
For example:
(origin --> snapshot)
lvol1 --> lvol2 --> lvol3 --> lvol4
\
--> lvol5 --> lvol6 --> lvol7 --> lvol8
$ lvs -o name,pool_lv,origin,ancestors,descendants vg
LV Pool Origin Ancestors Descendants
lvol1 pool lvol2,lvol3,lvol4,lvol5,lvol6,lvol7,lvol8
lvol2 pool lvol1 lvol1 lvol3,lvol4,lvol5,lvol6,lvol7,lvol8
lvol3 pool lvol2 lvol2,lvol1 lvol4
lvol4 pool lvol3 lvol3,lvol2,lvol1
lvol5 pool lvol2 lvol2,lvol1 lvol6,lvol7,lvol8
lvol6 pool lvol5 lvol5,lvol2,lvol1 lvol7,lvol8
lvol7 pool lvol6 lvol6,lvol5,lvol2,lvol1 lvol8
lvol8 pool lvol7 lvol7,lvol6,lvol5,lvol2,lvol1
LVSINFO, LVSSTATUS and LVSINFOSTATUS is the same as LVS, just with some
extra info/status decoration attached to it. Recognize this when looking
for properties for lvm2app. This fixes lvm_lv_get_property lvm2app call
for fields which already use LVS{INFO,STATUS,INFOSTATUS} - currently,
this is lv_attr field which was converted to LVSINFOSTATUS from
pure LVS type.
Rename original lv_error_when_full field to lv_when_full and also
convert it from binary field to string field displaying three
possible values: "error", "queueu" or "" (blank for undefined).
$ lvs vg/pool vg/pool1 vg/linear_lv -o+lv_when_full
LV VG Attr LSize Data% Meta% WhenFull
linear_lv vg -wi-a----- 4.00m
pool vg twi-aotz-- 4.00m 0.00 0.98 queue
pool1 vg twi-a-tz-- 4.00m 0.00 0.88 error
For -S|--select these synonyms are recognized:
"error" -> "error when full", "error if no space"
"queue" -> "queue when full", "queue if no space"
"" -> "undefined"
Support error_if_no_space feature for thin pools.
Report more info about thinpool status:
(out_of_data (D), metadata_read_only (M), failed (F) also as health
attribute.)
Show some stats with 'lvs'
Display same info for active cache volume and cache-pool.
data% - #used cache blocks/#total cache blocks
meta% - #used metadata blocks/#total metadata blocks
copy% - #dirty/#used cache blocks
TODO: maybe there is a better mapping
- should be seen as first-try-and-see.
The cache mode of a new cache pool is always explicitly
included in the vg metadata. If a cache mode is not
specified on the command line, the cache mode is taken
from lvm.conf allocation/cache_pool_cachemode, which
defaults to "writethrough".
The cache mode can be displayed with lvs -o+cachemode.
The 'lv_type' field name was a bit misleading. Better one is 'lv_role'
since this fields describes what's the actual use of the LV currently -
its 'role'.
The lv_layout and lv_type fields together help with LV identification.
We can do basic identification using the lv_attr field which provides
very condensed view. In contrast to that, the new lv_layout and lv_type
fields provide more detialed information on exact layout and type used
for LVs.
For top-level LVs which are pure types not combined with any
other LV types, the lv_layout value is equal to lv_type value.
For non-top-level LVs which may be combined with other types,
the lv_layout describes the underlying layout used, while the
lv_type describes the use/type/usage of the LV.
These two new fields are both string lists so selection (-S/--select)
criteria can be defined using the list operators easily:
[] for strict matching
{} for subset matching.
For example, let's consider this:
$ lvs -a -o name,vg_name,lv_attr,layout,type
LV VG Attr Layout Type
[lvol1_pmspare] vg ewi------- linear metadata,pool,spare
pool vg twi-a-tz-- pool,thin pool,thin
[pool_tdata] vg rwi-aor--- level10,raid data,pool,thin
[pool_tdata_rimage_0] vg iwi-aor--- linear image,raid
[pool_tdata_rimage_1] vg iwi-aor--- linear image,raid
[pool_tdata_rimage_2] vg iwi-aor--- linear image,raid
[pool_tdata_rimage_3] vg iwi-aor--- linear image,raid
[pool_tdata_rmeta_0] vg ewi-aor--- linear metadata,raid
[pool_tdata_rmeta_1] vg ewi-aor--- linear metadata,raid
[pool_tdata_rmeta_2] vg ewi-aor--- linear metadata,raid
[pool_tdata_rmeta_3] vg ewi-aor--- linear metadata,raid
[pool_tmeta] vg ewi-aor--- level1,raid metadata,pool,thin
[pool_tmeta_rimage_0] vg iwi-aor--- linear image,raid
[pool_tmeta_rimage_1] vg iwi-aor--- linear image,raid
[pool_tmeta_rmeta_0] vg ewi-aor--- linear metadata,raid
[pool_tmeta_rmeta_1] vg ewi-aor--- linear metadata,raid
thin_snap1 vg Vwi---tz-k thin snapshot,thin
thin_snap2 vg Vwi---tz-k thin snapshot,thin
thin_vol1 vg Vwi-a-tz-- thin thin
thin_vol2 vg Vwi-a-tz-- thin multiple,origin,thin
Which is a situation with thin pool, thin volumes and thin snapshots.
We can see internal 'pool_tdata' volume that makes up thin pool has
actually a level10 raid layout and the internal 'pool_tmeta' has
level1 raid layout. Also, we can see that 'thin_snap1' and 'thin_snap2'
are both thin snapshots while 'thin_vol1' is thin origin (having
multiple snapshots).
Such reporting scheme provides much better base for selection criteria
in addition to providing more detailed information, for example:
$ lvs -a -o name,vg_name,lv_attr,layout,type -S 'type=metadata'
LV VG Attr Layout Type
[lvol1_pmspare] vg ewi------- linear metadata,pool,spare
[pool_tdata_rmeta_0] vg ewi-aor--- linear metadata,raid
[pool_tdata_rmeta_1] vg ewi-aor--- linear metadata,raid
[pool_tdata_rmeta_2] vg ewi-aor--- linear metadata,raid
[pool_tdata_rmeta_3] vg ewi-aor--- linear metadata,raid
[pool_tmeta] vg ewi-aor--- level1,raid metadata,pool,thin
[pool_tmeta_rmeta_0] vg ewi-aor--- linear metadata,raid
[pool_tmeta_rmeta_1] vg ewi-aor--- linear metadata,raid
(selected all LVs which are related to metadata of any type)
lvs -a -o name,vg_name,lv_attr,layout,type -S 'type={metadata,thin}'
LV VG Attr Layout Type
[pool_tmeta] vg ewi-aor--- level1,raid metadata,pool,thin
(selected all LVs which hold metadata related to thin)
lvs -a -o name,vg_name,lv_attr,layout,type -S 'type={thin,snapshot}'
LV VG Attr Layout Type
thin_snap1 vg Vwi---tz-k thin snapshot,thin
thin_snap2 vg Vwi---tz-k thin snapshot,thin
(selected all LVs which are thin snapshots)
lvs -a -o name,vg_name,lv_attr,layout,type -S 'layout=raid'
LV VG Attr Layout Type
[pool_tdata] vg rwi-aor--- level10,raid data,pool,thin
[pool_tmeta] vg ewi-aor--- level1,raid metadata,pool,thin
(selected all LVs with raid layout, any raid layout)
lvs -a -o name,vg_name,lv_attr,layout,type -S 'layout={raid,level1}'
LV VG Attr Layout Type
[pool_tmeta] vg ewi-aor--- level1,raid metadata,pool,thin
(selected all LVs with raid level1 layout exactly)
And so on...
