IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
to lvm.conf in the activation section: 'snapshot_autoextend_threshold' and
'snapshot_autoextend_percent', that define how to handle automatic snapshot
extension. The former defines when the snapshot should be extended: when its
space usage exceeds this many percent. The latter defines how much extra space
should be allocated for the snapshot, in percent of its current size.
Add "devices/default_data_alignment" to lvm.conf to control the internal
default that LVM2 uses: 0==64k, 1==1MB, 2==2MB, etc.
If --dataalignment (or lvm.conf's "devices/data_alignment") is specified
then it is always used to align the start of the data area. This means
the md_chunk_alignment and data_alignment_detection are disabled if set.
(Same now applies to pvcreate --dataalignmentoffset, the specified value
will be used instead of the result from data_alignment_offset_detection)
set_pe_align() still looks to use the determined default alignment
(based on lvm.conf's default_data_alignment) if the default is a
multiple of the MD or topology detected values.
The new standard in the storage industry is to default alignment of data
areas to 1MB. fdisk, parted, and mdadm have all been updated to this
default.
Update LVM to align the PV's data area start (pe_start) to 1MB. This
provides a more useful default than the previous default of 64K (which
generally ended up being a 192K pe_start once the first metadata area
was created).
Before this patch:
# pvs -o name,vg_mda_size,pe_start
PV VMdaSize 1st PE
/dev/sdd 188.00k 192.00k
After this patch:
# pvs -o name,vg_mda_size,pe_start
PV VMdaSize 1st PE
/dev/sdd 1020.00k 1.00m
The heuristic for setting the default alignment for LVM data areas is:
- If the default value (1MB) is a multiple of the detected alignment
then just use the default.
- Otherwise, use the detected value.
In practice this means we'll almost always use 1MB -- that is unless:
- the alignment was explicitly specified with --dataalignment
- or MD's full stripe width, or the {minimum,optimal}_io_size exceeds
1MB
- or the specified/detected value is not a power-of-2
Introduce --norestorefile to allow user to override the new requirement.
This can also be overridden with "devices/require_restorefile_with_uuid"
in lvm.conf -- however the default is 1.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Update example.conf to describe vgmetadatacopies. Provide an
explanation for the '0' ("unmanaged") value.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Patch is inspired by Debian's extra patch.
- removes OWNER & GROUP make vars they are parts of INSTALL command.
- adds INSTALL_PROGRAM for executable, uses $(INSTALL)
- adds INSTALL_DATA for non-executable data, uses ($INSTALL)
- adds INSTALL_WDATA for writable non-executable data, uses ($INSTALL)
- adds configure option --enable-write_install - to support
installatin of writable files used by distribution
- replaces usage of ifeq @LIB_SUFFIX@ with $(LIB_SUFFIX)
- installs .a files from static builds without executable flag
- installs .a files to $(usrlibdir) instead of $(libdir)
- installs all static binaries to $(staticdir)
- create .so links for devel package in $(usrlibdir) instead of
$(libdir)
- makes .so and .so.LIB_VERSION files within builddir
- removes VERSIONED_SHLIB and created versioned LIB_SHARED automagicaly
- install LIB_SHARED via install_lib_shared target
- install plugins via install_lib_shared_plugin target
- prints whole 'install' command during installation instead of less
informative "Installing $(something) $(somewhere)"
- install multiple man pages with one INSTALL command
- use DISTCLEAN_TARGETS instead of creating multiple distclean targets
Usage of VPATH makes troubles when used within $(builddir).
Not only source files are being found through VPATH,
but targets as well. (make --debug=v)
Thus if user builds the code in $(srcdir) and also in some $(builddir)
he gets mangled results as some generated files (i.e. .export.sym)
are 'reused' from $(srcdir) instead of $(builddir).
This patch switches to use vpath were we could explicitly name
suffixes that should be looked via vpath - we must take care,
we do not generate files with these suffixes:
.c, .in, .po, .exported_symbols
. Add "monitoring" option to "activation" section of lvm.conf
. Have clvmd consult the lvm.conf "activation/monitoring" too.
. Introduce toollib.c:get_activation_monitoring_mode().
. Error out when both --monitor and --ignoremonitoring are provided.
. Add --monitor and --ignoremonitoring support to lvcreate. Update
lvcreate man page accordingly.
. Clarify that '--monitor' controls the start and stop of monitoring in
the {vg,lv}change man pages.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
This patch adds a new implementation of locking function instead
of mlockall() that may lock way too much memory (>100MB).
New function instead uses mlock() system call and selectively locks
memory areas from /proc/self/maps trying to avoid locking areas
unused during lock-ed state.
Patch also adds struct cmd_context to all memlock() calls to have
access to configuration.
For backward compatibility functionality of mlockall()
is preserved with "activation/use_mlockall" flag.
As a simple check, locking and unlocking counts the amount of memory
and compares whether values are matching.
Add configure --enable-units-compat to set si_unit_consistency off by default.
Use standard output units for 'PE Size' and 'Stripe size' in pv/lvdisplay.
Adds 'data_alignment_detection' config option to the devices section of
lvm.conf. If your kernel provides topology information in sysfs (linux
>= 2.6.31) for the Physical Volume, the start of data area will be
aligned on a multiple of the ’minimum_io_size’ or ’optimal_io_size’
exposed in sysfs.
minimum_io_size is used if optimal_io_size is undefined (0). If both
md_chunk_alignment and data_alignment_detection are enabled the result
of data_alignment_detection is used.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If the pvcreate --dataalignmentoffset option is not specified the start
of a PV's aligned data area will be shifted by the associated
'alignment_offset' exposed in sysfs (unless
devices/data_alignment_offset_detection is disabled in lvm.conf).
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Buildsystem support device-mapper only install,
but generic install tagret includes both dm+lvm2.
For distribution which uses separate install_device-mapper,
there is no way how to install lvm2 only
(so after installing lvm2 for packaging purposes
built system must remove installed device-mapper files).
Fix it by allowing lvm2_install target, similarily like
install_cluster for clvmd.
(install = install_device-mapper + install_lvm2)
This patch is not fully tested and leaves some related bugs unfixed.
Intended behaviour of the code now:
pe_start in the lvm2 format PV label header is set only by pvcreate (or
vgconvert -M2) and then preserved in *all* operations thereafter.
In some specialist cases, after the PV is added to a VG, the pe_start
field in the VG metadata may hold a different value and if so, it
overrides the other one for as long as the PV is in such a VG.
Currently, the field storing the size of the data area in the PV label
header always holds 0. As it only has meaning in the context of a
volume group, it is calculated whenever the PV is added to a VG (and can
be derived from extent_size and pe_count in the VG metadata).
