IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
pvcreate gives
WARNING: Ignoring unsupported value for metadata/pvmetadataignore.
It was warning if there is no config file entry instead of only if the node
exists but is empty.
Should be faster then strncpy - since we could avoid clearing 4KB pages
with each strncpy(...,PATH_MAX).
Also it's easy to check whether string fit - and eventually avoid
to continue working we incomplete string.
If we have good enough glibc to return number of needed chars, do not
loop try to reach good size, but use this size directly for allocation,
saving also last strdup.
Since now we start with 16 bytes - skip buffer realloc for shorter string.
Device-mapper in kernel uses '\' as escape character so it's better
to double it to avoid any confusion when using existing device names
with '\' in the table specification.
For example:
dmsetup create x --table "0 8 linear /dev/mapper/a\x20b 0"
should pass just fine now without a need to explicitly escape the '\' char
like this:
dmsetup create x --table "0 8 linear /dev/mapper/a\\x20b 0"
If dm_task_get_name or dm_task_get_names gets called, these will return
unmangled form of the names so the name mangling stays totally transparent
to any libdevmapper user (unless DM_STRING_MANGLING_NONE is used in which
case the name is not touched and it is is returned as it is in kernel).
For example:
dmsetup create "a b" - will create a\x20b device in kernel and so udev will
create /dev/mapper/a\x20b
dm_task_get_name/names will still return "a b"
In AUTO mode, the libdevmapper user can still query the device by using
the mangled ("a\x20b") or unmangled form of the name when calling dm_task_set_name.
If mangled name is provided, it's detected and the name is kept as it is.
If unmangled name is provided, it will be mangled. IOW in AUTO mode it's
totally transparent and it should not require any changes in the code
using libdevmapper.
However, any libdevmapper user must be aware of the fact that the mangled form
of the name appears in /dev/mapper (udev just can't deal with those blacklisted
characters).
dm_task_get_name_mangled will always return mangled form of the name while
the dm_task_get_name_unmangled will always return unmangled form of the name
irrespective of the global setting (dm_set/get_name_mangling_mode).
This is handy in situations where we need to detect whether the name is already
mangled or not. Also display functions make use of it.
Use the DEV_NAME macro to use the mangled form of the name if present,
use normal name otherwise (we store both forms - mangled and unmangled in
struct dm_task). Mangled form should be always preferred over unmangled
with the exception of the situations where we divide one task into several
others (like "create and load") - we need to avoid mangling the name twice
(because of multiple dm_task_set_name calls)!
If dm_task_set_name/newname is called, the name provided will be
automatically translated to correct encoded form with the hex enconding
so any character not on udev whitelist will be mangled with \xNN
format where NN is hex value of the character used.
By default, the name mangling mode used is the one set during
configure with the '--with-default-name-mangling' option.
This option configures the default name mangling mode used, one of:
AUTO, NONE and HEX.
The name mangling is primarily used to support udev character whitelist
(0-9, A-Z, a-z, #*-.:=@_) so any character that is not on udev whitelist
will get translated into an encoded form \xNN where NN is the hex value
of the character.
It was not possible to pass down the DM_[FORCE|NO]SYNC flags to
'dm_tree_node_add_raid_target'. This meant that converting to 'raid1' from
'mirror' would cause a full resync. (It also meant that '--nosync' was
ineffective when creating a 'raid1' LV.)
I've taken the 'reserved' parameter in 'dm_tree_node_add_raid_target' and
used it for the "flags" parameter. Now it is possible to pass the sync
flags and any other flags that may come up.
In case of zero bytes would be read from sysfs, it would store '\0' on
temp_buf[-1] address.
Simplify some buffer length calculation and use strcpy if we've just
checked string fits in give buffer.
Replace jump label error: with bad: commonly used in libdm.
Replace asserts with test for failing memory allocation.
Add at least stack traces.
Index counter starts from 1 (0 reserved for error), so replacing fingerprint.
Since the function dm_get_next_target() returns NULL as 'next' pointer
so it's not a 'real' error - set 0 to all parameters when NULL is
returned because of missing head.
i.e. one of use case::
do {
next = dm_get_next_target(dmt, next, &start, &length,
&target_type, ¶ms);
size += length;
} while (next);
Using PRELOAD part would lead to problems when the problem
would happen before vg_write and vg_commit.
Also this change is necessary for snapshot creation sequence.
This is accomplished by reading associated sysfs information. For a dm device,
this is /sys/dev/block/major:minor/dm/name (supported in kernel version >= 2.6.29,
for older kernels, the behaviour is the same as for non-dm devices).
For a non-dm device, this is a readlink on /sys/dev/block/major:minor, e.g.
/sys/dev/block/253:0 --> ../../devices/virtual/block/dm-0.
The last component of the path is a proper kernel name (block device name).
One can request to read only kernel names by setting the 'prefer_kernel_name'
argument if needed.
LVM- prefix.
Try harder not to leave stray empty devices around (locally or remotely) when
reverting changes after failures while there are inactive tables.
If we know major:minor number of device (which is known after resume) we will
try to use sysfs to set/get read ahead parameters of device.
This avoid potential problem of blocking commands like 'dmsetup info' awaiting
for device being usable for open/close - i.e. overfilled thin pool may block
such command.
Add dm_get_status_thin_pool and dm_get_status_thin functions to
parse 'params' argument which is received via dm_get_next_target.
Returns filed structure allocated from given mempool.
RAID is not like traditional LVM mirroring. LVM mirroring required failed
devices to be removed or the logical volume would simply hang. RAID arrays can
keep on running with failed devices. In fact, for RAID types other than RAID1,
removing a device would mean substituting an error target or converting to a
lower level RAID (e.g. RAID6 -> RAID5, or RAID4/5 to RAID0). Therefore, rather
than removing a failed device unconditionally and potentially allocating a
replacement, RAID allows the user to "replace" a device with a new one. This
approach is a 1-step solution vs the current 2-step solution.
example> lvconvert --replace <dev_to_remove> vg/lv [possible_replacement_PVs]
'--replace' can be specified more than once.
example> lvconvert --replace /dev/sdb1 --replace /dev/sdc1 vg/lv
Avoid creation of target type name when it's longer then
DM_MAX_TYPE_NAME (noticed by static analyzer where the
sp.target_type might be missing '\0' at the end.)
Before patch:
$> dmsetup create long
0 1000 looooooooooooooooooooooooooong
^D
device-mapper: reload ioctl failed: Invalid argument
After patch:
$> dmsetup create xxx
0 1000 looooooooooooooooooooooooooong
Target type name looooooooooooooooooooooooooong is too long.
Command failed
Remove DM_THIN_ERROR_DEVICE_ID from API.
Remove API warning.
Drop code that was using DM_THIN_ERROR_DEVICE_ID (already commented)
Remove debug message which slipped in through some previous commit.
