1
0
mirror of git://sourceware.org/git/lvm2.git synced 2024-12-22 17:35:59 +03:00
Commit Graph

3535 Commits

Author SHA1 Message Date
Zdenek Kabelac
eefcbd5b28 thin: fix update_pool_lv error path
When update fails in suspend() (sending of messages
fails because metadata space is full) call resume(),
so the locking sequence works properly for clustering.

Also failing deactivation should unlock memory.
2016-02-19 11:25:56 +01:00
Zdenek Kabelac
f31d596c0d thin: report needs_check and fail state
Fix reporting of Fail thin-pool target status
as attr[8] letter 'F'.

Report  'needs_check' status from thin-pool target via
attr field [4] (letter 'c'/'C'), and also via CheckNeeded field.

TODO: think about better name here?
TODO: lots of prop_not_implemented_set
2016-02-18 16:49:34 +01:00
Zdenek Kabelac
0358ca3aad thin: report PERCENT_INVALID for failed pool
When thin-pool is in failed/error state, we can't
read percentage so report invalid value.
2016-02-18 16:45:42 +01:00
Peter Rajnoha
bc19a16fc7 report: report -1, not 'unkown' for lv_{snapshot_invalid,merge_failed} with --binary
State:
$ lvs -o lv_name,lv_active_locally,lv_snapshot_invalid,lv_merge_failed vg/lvol0
  LV    ActLocal       SnapInvalid     MergeFailed
  lvol0 active locally         unknown         unknown

Now with using --binary switch.

Before this patch (lv_snapshot_invalid and lv_merge_failed not switched into numeric value
where -1 represents 'unknown' value)
$ lvs -o lv_name,lv_active_locally,lv_snapshot_invalid,lv_merge_failed vg/lvol0 --binary
  LV    ActLocal   SnapInvalid     MergeFailed
  lvol0          1         unknown         unknown

With this patch applied:
$ lvs -o lv_name,lv_active_locally,lv_snapshot_invalid,lv_merge_failed vg/lvol0 --binary
  LV    ActLocal   SnapInvalid     MergeFailed
  lvol0          1              -1              -1
2016-02-18 12:10:00 +01:00
Alasdair G Kergon
7dce72ee18 . 2016-02-18 01:50:36 +00:00
Alasdair G Kergon
545e58fd18 WHATS_NEW 2016-02-18 00:01:02 +00:00
Alasdair G Kergon
5987562cf9 lvmdbus: Add new daemon. 2016-02-17 23:53:35 +00:00
Peter Rajnoha
cc9e683adc toollib: skip PV if system ID is used and PV marked as used but metadata missing
If we know that a PV belongs to some VG and we're missing metadata
(because we have only those PV(s) from VG present in the system that
don't have metadata areas), we should skip such PV when processing
under system ID.

This is because we know that the PV belongs to some VG, but we
really can't decide whether it matches system ID unless the VG
metadata is present again.
2016-02-15 15:17:36 +01:00
Peter Rajnoha
698e0eb851 WHATS_NEW: PV_EXT_USED flag and related 2016-02-15 13:07:35 +01:00
Alasdair G Kergon
952498ef4d post-release 2016-02-15 10:48:55 +00:00
Alasdair G Kergon
228b8245e4 pre-release 2016-02-15 10:35:16 +00:00
Ondrej Kozina
0daf9d7ac5 pvmove: fix possible memory pool corruption
This is a hotfix for a bug introduced in
6d7dc87cb3.

The bug description: First we allocate memory for
processing handle (at an address 1) then we
allocate some memory on the same pool for later use
in pvmove_poll function inside the process_each_pv
function (at an address 2). After we jump out of
process_each_pv we called destroy_processing_handle.
As a result of destroying the handle memory pool could
deallocate all memory at address 1 or higher. The
pvmove_poll function tried to copy a memory allocated
at address 2 that could be returned to the system.
If it was so it led to segfault.

We need to rethink proper fix but in the same time
cmd->mem pool is recreated per each lvm command so
this should not cause problems even when we run
multiple commands in lvm shell.

A valgrind snapshot of the corruption:

Invalid read of size 1
    at 0x4C29F92: strlen (mc_replace_strmem.c:403)
    by 0x5495F2E: dm_pool_strdup (pool.c:51)
    by 0x1592A7: _create_id (pvmove.c:774)
    by 0x159409: pvmove_poll (pvmove.c:796)
    by 0x1599E3: pvmove (pvmove.c:931)
    by 0x15105B: lvm_run_command (lvmcmdline.c:1655)
    by 0x1523C3: lvm2_main (lvmcmdline.c:2121)
    by 0x1754F3: main (lvm.c:22)
Address 0xf15df8a is 138 bytes inside a block of size 8,192 free'd
    at 0x4C28430: free (vg_replace_malloc.c:446)
    by 0x5494E73: dm_free_wrapper (dbg_malloc.c:357)
    by 0x5495DE2: _free_chunk (pool-fast.c:318)
    by 0x549561C: dm_pool_free (pool-fast.c:151)
    by 0x164451: destroy_processing_handle (toollib.c:1837)
    by 0x1598C1: pvmove (pvmove.c:903)
    by 0x15105B: lvm_run_command (lvmcmdline.c:1655)
    by 0x1523C3: lvm2_main (lvmcmdline.c:2121)
    by 0x1754F3: main (lvm.c:22)
2016-02-12 11:40:33 +01:00
M.H. Tsai
e32e793c43 lvconvert: enable spare creation during conversion
Let user control pool metadata spare creation after repair as
the VG might not have enough free space.
2016-02-11 18:30:40 +01:00
M.H. Tsai
3b76e9fd98 config: fix verbose type to int
'verbose' was marked as a boolean option while it
takes integer args - so it has limited usage to 0 or 1,
but we supported 0-4 at least.

Fix it by switching to corrent int type.
(Hopefully noone was trying to use this variable as true/yes/false/no
way - as the would be unsupported/undocumented).
2016-02-11 18:30:39 +01:00
Zdenek Kabelac
02f2916b5b thin: fix low_water_mark threshold calc
Reporter noticed lvm2 incorrectly translated
lvm2 threshold value to  water mark in commit:
99237f0908

Fix it by properly translating size to number of
blocks in thin-pool and then calc for free blocks
matching configured lvm2 threshold value.

Reported-by: Ming-Hung Tsai <mingnus@gmail.com>
2016-02-11 18:30:24 +01:00
Peter Rajnoha
8423be80ee conf: use use_blkid_wiping=0 if not defined in lvm.conf and support not compiled in
Normally, we generate and provide lvm.conf file where use_blkid_wiping
is set based on whether support for this is compiled in or not. This was
generated properly based on configure.

However, if lvm.conf is not used at all (someone deletes it) or the value
in lvm.conf is commented out (user edited it), we still need to use
proper default value that is based on DEFAULT_USE_BLKID_WIPING taken
from configure script - we used hardcoded value of "1" in this case
by mistake.
2016-02-10 14:53:10 +01:00
Peter Rajnoha
c0e0f5a923 filter: do not check for suspended devs in filter-usable in lvmetad mode
We already do check for suspended devs within udev rules where
the pvscan is to update lvmetad. So the check for suspended devs
in "pre-lvmetad" chain is not useful here - remove it - it may
be a source of hardly to detect races anyway (if udev rule detects
the device is not suspended and then the pvscan instance sees the
dev as suspended, we may end up not reacting to the event properly).
2016-02-03 14:57:36 +01:00
Peter Rajnoha
ec43f55445 filters: partitioned: fix partition table filter with external_device_info_source="udev" and blkid<2.20
Non-dm devices have ID_PART_TABLE_TYPE variable exported in
udev db from blkid scan for *both* whole devices and partitions.
We used ID_PART_ENTRY_DISK in addition to decide whether this
is the whole device or partition and then we filtered out only
whole devices where the partition table really is.

However, ID_PART_ENTRY_DISK was added in blkid 2.20 so we need
to use a different set of variables to decide on whole devices
and partitions on systems where older blkid is still used.

Now, we use ID_PART_TABLE_TYPE to detect that there's something
related to partitioning with this device and we use DEVTYPE variable
instead to decide between whole device (DEVTYPE="disk") and partition
(DEVTYPE="partition").

For dm devices it's simpler, we have ID_PART_TABLE_TYPE variable\
set in udev db for whole devices. It's not set for partitions,
hence we don't need more variable in addition to make the decision
on whole device vs. partition (dm devices do not have regular
partitions, hence DEVTYPE can't be used anyway, it's always set
to "disk" for whole disks and partitions).
2016-02-02 13:28:11 +01:00
Alasdair G Kergon
0ad40a76c0 post-release 2016-01-25 01:12:27 +00:00
Alasdair G Kergon
d05d7d974c pre-release 2016-01-25 01:08:16 +00:00
Peter Rajnoha
136fd8f2f6 conf: add metadata/check_pv_device_sizes 2016-01-22 14:16:00 +01:00
Peter Rajnoha
c0912af310 metadata: check PV dev size is not less than PV size 2016-01-22 14:16:00 +01:00
Peter Rajnoha
d090d6574e device: also cache device size
Add "size" and "size_seqno" to struct device to cache device's size
and also to control its lifetime - the cached value is valid as long
as the global _dev_size_seqno is equal to the device's size_seqno,
otherwise we need to get the size again and cache the new value.

This patch also adds new dev_size_seqno_inc() fn for the appropriate
parts of the code to increment current global value of _dev_size_seqno
and hence to cause all currently cached values for device sizes to
be invalidated.

The device size is now cached because we're planning to reuse this
information for further checks and we want to avoid checking it more
than necessary to save resources.
2016-01-22 14:13:34 +01:00
Zdenek Kabelac
347575df1d toollib: restore command break support
Fix regression caused by c9f021de0b.
This commit actually transfered real-action (e.g. device removal)
into the next loop which has however missed to check for break.
So add check for break also there.
2016-01-21 13:29:07 +01:00
Zdenek Kabelac
c701d9cc8c toollib: use cmd mempool for list
When creating a list in 'context of command' - use proper mempool.

vg->vgmem is mempool related to VG metadata - and can be eventually
locked read-only when VG struct is shared.
2016-01-21 13:28:28 +01:00
Zdenek Kabelac
3e09f916b4 man: show hidden pieces
W: manual-page-warning /usr/share/man/man8/lvm.8.gz 491: warning: macro `_cdata',' not defined

rpmlint actually notices we had few hidden word in man page.
the line cannot start with apostrophe as it has then a different
meaning.
2016-01-21 12:11:35 +01:00
Peter Rajnoha
43b436398e configure: fix configure to set proper use_blkid_wiping if autodetected as disabled
If not using explicit --enable-blkid-wiping/--disable-blkid-wiping
configure option, the configure script tries to enable/disable blkid
wiping feature automatically based on blkid library version found.

The script incorrectly set default value for lvm.conf's
allocation/use_blkid_wiping" setting to "1" (enabled) if proper
blkid library version was not found or the version found was less
than the minimum required. It should be set to "0" in this case.
2016-01-21 10:01:34 +01:00
Alasdair G Kergon
509410bbbc clvmd: Initialise udev.
Since commit 2fc126b00d, the library
code requires udev to be initialised for device scanning and
clvmd can fail to find VGs if devices/external_device_info_source
is set to "udev".
2016-01-20 00:58:09 +00:00
Peter Rajnoha
1341f83554 report: add seg_le_ranges report field 2016-01-19 14:30:21 +01:00
Peter Rajnoha
fccb1bb276 report: make devices, metadata_devices, seg_pe_ranges and seg_metadata_le_ranges fields consistent
There are two basic groups of fields for LV segment device reporting:
  - related to LV segment's devices: devices and seg_pe_ranges
  - related to LV segment's metadata devices: metadata_devices and seg_metadata_le_ranges

The devices and metadata_devices report devices in this format:
    "device_name(extent_start)"

The seg_pe_ranges and seg_metadata_le_ranges report devices in
this format:
    "device_name:extent_start-extent_end"

This patch reverts partly what commit 7f74a99502
(v 2.02.140) introduced in this area - it added [] for
hidden devices to mark them for all four fields mentioned above.

We won't be marking hidden devices in devices and metadata_devices
fields.

The seg_metadata_le_ranges field will have hidden devices marked -
it's new enough that we don't need to care about compatibility much
yet.

The seg_pe_ranges is old enough that we shouldn't be changing this
one - so we're reverting to not marking hidden devices here.
Instead, there's going to be a new field "seg_le_ranges" which
is going to replace the seg_pe_ranges and it will mark hidden devices -
this is going to be introduced in a patch later.

So in the end we'll end up with:

   (LV segment's devices)
   devices field with "device_name(extent_start)" format, not marking hidden devices
   seg_pe_ranges field with "device_name:extent_start-extent_end" format, not marking hidden devices (deprecated, new seg_le_ranges should be used instead for standardized format)
   seg_le_ranges field with "device_name:extent_start-extent_end" format, marking hidden devices

   (LV segment's metadata devices)
   metadata_devices field with "device_name:extent_start-extent_end" format, not marking hidden devices
   seg_metadata_le_ranges field with "device_name:extent_start-extent_end" format, marking hidden devices

Also, both seg_le_ranges and seg_metadata_le_ranges will honour the
report/list_item_separator setting which can be used to configure
the delimiter used for list items.

So, to sum it up, we will recommend using the new seg_le_ranges and
seg_metadata_le_ranges fields because they display devices with
standard extent range format, they can mark hidden devices and they
honour the report/list_item_separator setting.

We'll be keeping devices,seg_pe_ranges and metadata_devices fields
for compatibility.
2016-01-19 14:30:20 +01:00
Alasdair G Kergon
a3f484f812 report: Fix seg_pe_ranges LV sizes.
When reporting on LVs, take the end of the range from the size of the
underlying (hidden) LV rather than the logical size of the current
segment (that PVs use).
2016-01-18 22:04:43 +00:00
Peter Rajnoha
1ee6af344b report: add kernel_cache_settings field
Existing cache_settings field displays the settings which are
saved in metadata. Add new kernel_cache_settings fields to display
the settings which are currently used by kernel, including fields
for which default values are used.

This way users have complete view of the set of cache settings
supported (and which they can set) and their values which are used
at the moment by kernel.

For example:

$  lvs -o name,cache_policy,cache_settings,kernel_cache_settings vg
  LV      Cache Policy Cache Settings                               KCache Settings
  cached1 mq    migration_threshold=1024,write_promote_adjustment=2 migration_threshold=1024,random_threshold=4,sequential_threshold=512,discard_promote_adjustment=1,read_promote_adjustment=4,write_promote_adjustment=2
  cached2 smq   migration_threshold=1024                            migration_threshold=1024
  cached3 smq   migration_threshold=2048
2016-01-18 14:42:29 +01:00
Alasdair G Kergon
7f62777041 post-release 2016-01-16 02:12:10 +00:00
Alasdair G Kergon
0faa27d4f5 pre-release 2016-01-16 02:11:21 +00:00
Peter Rajnoha
7559af2334 lvm2app: fix lvm2app to return either 0 or 1 for lvm_vg_is_{clustered,exported}
Fix lvm2app to return either 0 or 1 for lvm_vg_is_{clustered,exported},
including internal functions pvseg_is_allocated and vg_is_resizeable
which are not yet exposed in lvm2app but make them consistent with the
rest.
2016-01-15 14:42:18 +01:00
Peter Rajnoha
b82d5ee092 report: add kernel_discards report field to display thin pool discard used in kernel
Thin pool discard mode set in metadata can be different from the one
actually used if any device underneath does not support that mode. Add
kernel_discard report field to make it possible to see this difference.
2016-01-14 16:54:12 +01:00
Zdenek Kabelac
8857b22764 segtype: check for activation
Before setting static variable with check passed state,
detect if we are allowed to talk to driver.
2016-01-14 11:34:05 +01:00
Zdenek Kabelac
43897239b3 lvresize: check for poolmetadatasize arg earlier
Since we check for poolmetadatasize, we need to detect it before
actual test.
2016-01-14 11:34:04 +01:00
Alasdair G Kergon
01228b692b vgcfgrestore: Retain allocatable PV attribute.
pvchange -xn was getting lost.
All PVs were set to allocatable again after restore.

Moved setting ALLOCATABLE_PV outside pv_setup().
2016-01-14 00:46:45 +00:00
Peter Rajnoha
1417ed304b cleanup: rename 'invisible devices' to 'hidden devices' 2016-01-13 15:22:46 +01:00
Peter Rajnoha
d2d5c5e6c9 WHATS_NEW: reports and invisible devices 2016-01-13 14:45:49 +01:00
Ondrej Kozina
40701af969 pvscan: restore polling in autoactivation handler
This commit fixes regression in auto-activation code introduced
in commit: c26d81d6e6.

- resolves rhbz1295562
2016-01-12 11:40:43 +01:00
Peter Rajnoha
d6cf83968c report: use brackets to signify LVs which are not visible when reporting lv_parent
Use common _lvname_disp to report lv_parent. The _lvname_disp
takes care of properly marking LVs which are not visible - such
LVs are always enclosed in brackets when reported within any
other field.

For example, thin pool over RAID.

Before:

$ lvs -a -o name,lv_parent,data_lv,metadata_lv vg
  LV                          Parent           Data               Meta
  cache_pool                                   [cache_pool_tdata] [cache_pool_tmeta]
  [cache_pool_tdata]          cache_pool
  [cache_pool_tdata_rimage_0] cache_pool_tdata
  [cache_pool_tdata_rimage_1] cache_pool_tdata
  [cache_pool_tdata_rmeta_0]  cache_pool_tdata
  [cache_pool_tdata_rmeta_1]  cache_pool_tdata
  [cache_pool_tmeta]          cache_pool
  [cache_pool_tmeta_rimage_0] cache_pool_tmeta
  [cache_pool_tmeta_rimage_1] cache_pool_tmeta
  [cache_pool_tmeta_rmeta_0]  cache_pool_tmeta
  [cache_pool_tmeta_rmeta_1]  cache_pool_tmeta
  [lvol0_pmspare]

With this patch applied:

$ lvs -a -o name,lv_parent,data_lv,metadata_lv vg
  LV                          Parent             Data               Meta
  cache_pool                                     [cache_pool_tdata] [cache_pool_tmeta]
  [cache_pool_tdata]          cache_pool
  [cache_pool_tdata_rimage_0] [cache_pool_tdata]
  [cache_pool_tdata_rimage_1] [cache_pool_tdata]
  [cache_pool_tdata_rmeta_0]  [cache_pool_tdata]
  [cache_pool_tdata_rmeta_1]  [cache_pool_tdata]
  [cache_pool_tmeta]          cache_pool
  [cache_pool_tmeta_rimage_0] [cache_pool_tmeta]
  [cache_pool_tmeta_rimage_1] [cache_pool_tmeta]
  [cache_pool_tmeta_rmeta_0]  [cache_pool_tmeta]
  [cache_pool_tmeta_rmeta_1]  [cache_pool_tmeta]
  [lvol0_pmspare]
2016-01-11 15:34:35 +01:00
Peter Rajnoha
a83d611a86 report: fix invalid memory read when reporting cache LV policy name
Fix regression caused by commit c2d4330f27
which removed the dm_pool_strdup for the cache policy name in
_cache_policy_disp report function.

This regression was hit with buffered reporting only (which is
used by default). The reason is that for buffered reporting, we're
iterating over LVs in VG (process_each_lv) while gathering
all the information that is needed for the report. In this case,
the LV's cache policy name has not been duped, but only the pointer
to the original VG buffer was stored. When the LV iteration finished,
the VG buffer was freed and any report to output called later
(dm_report_output call) accessed already freed VG data.

This didn't appear if unbuffered reporting was used (--unbuffered)
because in this case, the data were reported to output as
soon as they were processed, hence it was reported to output
before the VG data was freed.
2016-01-11 12:51:08 +01:00
Alasdair G Kergon
0dac4f09b4 post-release 2016-01-08 18:51:08 +00:00
Alasdair G Kergon
04b82a8126 pre-release 2016-01-08 18:46:41 +00:00
David Teigland
580c67486f document commits since last release 2016-01-08 09:53:58 -06:00
Peter Rajnoha
8d11468ab2 man: lvs: document F,D and M thin pool health status chars for lv_attr in lvs man page 2016-01-08 15:47:01 +01:00
Peter Rajnoha
4304a95dfd lvmdump: also add lvm2-activation{-early,-net}.service systemd status for lvmdump -s
The lvm2-activation{-early,-net}.service systemd unit statuses were missing
in dump gathered by lvmdump -s. These are quite important when debugging
scenarios with systemd environment and where lvmetad is not used.
2016-01-04 15:12:25 +01:00
Alasdair G Kergon
1be56e46c4 post-release 2015-12-14 12:25:48 +00:00