IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
In liblvm, we will reserve the word 'change' to mean an API that
both sets one or more values, and commits to disk. This will be
consistent with the LVM commandline. The existing vg_change_pesize()
function does not commit to disk, but just changes the extent_size
and ensures all internal structures are updated. This logic should
be contained in a function that sets the value.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
It would be nice to have one function that does all the validation
and setting of the VG's pesize. However, currently some checks
are in the higher-level function _vgchange_pesize(), and some
checks are in the lower function vg_change_pesize().
This patch moves most of the higher-level checks inside
vg_change_pesize. In one case a failure return code is
changed from ECMD_FAILED to EINVALID_CMD_LINE.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Remove unneeded LOCK_NONBLOCKING from vg_read() API and tools that
use it. We no longer need this flag anywhere since we now automatically
set LCK_NONBLOCK inside lock_vol() if vgs_locked().
For further details, see:
commit d52b3fd3fe2006e2d13e42f8518b6512bff03710
Author: Dave Wysochanski <dwysocha@redhat.com>
Date: Wed May 13 13:02:52 2009 +0000
Remove NON_BLOCKING lock flag from tools and set a policy to auto-set.
As a simplification to the tools and further liblvm, this patch pushes
the setting of NON_BLOCKING lock flag inside the lock_vol() call.
The policy we set is if any existing VGs are currently locked, we
set the NON_BLOCKING flag.
At some point it may make sense to add this flag back if we get an
RFE from a liblvm user, but for now let's keep it as simple as
possible.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Remove READ_CHECK_EXISTENCE and vg_might_exist().
This flag and API is no longer used now that we have a separate
API to check for existence.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Remove unneeded LOCK_KEEP from vg_read() interface.
Update comment to clarify cases where _vg_lock_and_read() may return
with an error but the lock held. Would be nice to make the vg_read()
interface consistent with regards to lock held and error behavior.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Update units_to_bytes() to support (S)ectors: 500 bytes.
- 500 byte (S)ectors is of questionable value but it adds to consistency
if a user happens to use --units S. This seems better than an error.
Updated test/t-covercmd.sh to test --units [hS]
Document the units that can be displayed via --units uniformly.
- (p)etabytes and (e)xabytes were missing in pvs, vgs and lvs man pages.
Made lvreduce man page "... in units of megabytes." consistent (with the
lvextend and lvresize man pages).
Sun May 3 13:06:14 CEST 2009 Petr Rockai <me@mornfall.net>
* Don't segfault in vg_release when vg->cmd is NULL.
Author: Petr Rockai <prockai@redhat.com>
Committer: Dave Wysochanski <dwysocha@redhat.com>
Sun May 3 12:32:30 CEST 2009 Petr Rockai <me@mornfall.net>
* Rework the toollib interface (process_each_*) on top of new vg_read.
Rebased 6/26/09 by Dave W.
- Add skipping message to process_each_lv
- Remove inconsistent_t.
Is an application uses query and set major:minor
to device, it should not fallback to default major by default.
Add new function whoich allows that (and use it in lvm2).
E.g.
# vgscan
Parse error at byte 2360 (line 54): expected a value
Failed to load config file /etc/lvm/lvm.conf
You have a memory leak (not released memory pool):
[0x818c788] library (12 bytes)
...
status flag after reading the volume group. Thus, no need to set the flag
in vg_read() or clear it later before calling _vg_bad_status_bits().
Also, add back in the !lockingfailed() as part of the CLUSTERED flag check.
It's unclear why it was removed when the check was moved from
_vg_bad_status_bits() to inside _vg_lock_and_read().
There was an open question about the last check in the 'if' stmt for
lockingfailed() with a previous patch submitted. However, I would
defer that right now as it is a separate item and this patch should
be no functional change by including the !lockingfailed().
Petr acked this patch on 5/26 I just forgot to check it in.
Acked-by: Petr Rockai <prockai@redhat.com>
Various tools need to check for existence of a VG before doing something
(vgsplit, vgrename, vgcreate). Currently we don't have an interface to
check for existence, but the existence check is part of the vg_read* call(s).
This patch is an attempt to pull out some of that functionality into a
separate function, and hopefully simplify our vg_read interface, and
move those patches along.
vg_lock_newname() is only concerned about checking whether a vg exists in
the system. Unfortunately, we cannot just scan the system, but we must first
obtain a lock. Since we are reserving a vgname, we take a WRITE lock on
the vgname. Once obtained, we scan the system to ensure the name does
not exist. The return codes and behavior is in the function header.
You might think of this function as similar to an open() call with
O_CREAT and O_EXCL flags (returns failure with -EEXIST if file already
exists).
NOTE: I think including the word "lock" in the function name is important,
as it clearly states the function obtains a lock and makes the code more
readable, especially when it comes to cleanup / unlocking. The ultimate
function name is somewhat open for debate though so later we may rename.
Because preload of table for snapshot can produce snapshot
metadata (in kernel cow header) read.
Code should suspend origin first to avoid possible deadlock
when preloading (thus calling snapshot in-kernel constructor)
for origin with suspended cow device.
(fixes previous commit)
Several commands calls process_each_vg() and in provided
callback it explicitly recovers VG if inconsistent.
(vgchange, vgconvert, vgscan)
It means that old VG is released and reread but the function
above (process_one_vg) tries to unlock and release old VG.
Patch moves the repair logic into _process_one_vg() function.
It always tries to read vg (even inconsistent) and then decides
what to do according new defined parameter.
Also patch unifies inconsistent error messages.
The only slight change if for vgremove command, where
it now tries to repair VG before it removes if force arg is given.
(It works similar way before, just the order of operation changed).
When some parts of lvm are built as shared libraries (for example with
--with-snapshots=shared), the 'make' command does not build these parts.
The shared parts are built with 'make install' command.
This bug can be seen if you go to 'lib' subdirectory and type 'make'.
If you type 'make', the shared libraries are not built, if you type
'make all', the shared libraries are built.
The reason for the bug is the line $(SUBDIRS): $(LIB_STATIC)
If make is executed without any arguments, it makes the first target
in the Makefile. If the first target is '$(SUBDIRS): $(LIB_STATIC)',
it only builds static libraries.
This patch moves '$(SUBDIRS): $(LIB_STATIC)' after
include $(top_srcdir)/make.tmpl. make.tmpl contains the 'all' target
as its first target, so 'make' will be equivalent to 'make all' and
shared libraries will be build with 'make' command.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
When mirror convert polling is started (mainly as backgound process,
in lvchange -a y or in lvconvert itself) it tries to read VG
and LV identified by its name.
Unfortunatelly, the VG can have already different LV under the same name,
and various more or less funny things can happen (note that
_finish_lvconvert_mirror suspends the volume for example).
(the typical example is our testing script which continuously recreates
LVs under the same name in the same VG.)
This patch adds optional uuid parameter which helps to properly
select the monitoring object. For lvconvert polling it is set to LV UUID
and both _get_lvconvert_vg and _get_lvconvert_lv uses it to read proper VG/LV.
(In the pvmove case it is NULL, here we poll for physical volume name).
If there is no free area for log, code should break the loop.
(Otherwise it uses uninitializes areas later.)
Easily reproducible using lvconvert --repair
- kill device with log
- run lvconvert --repair vg/lv (with no PV usable for log)
During vgreduce is failed mirror image replaced with error segment,
this segmant type has always area_count == 0.
Current code expects that there is at least one area with device,
patch fixes it by additional check (fixes segfault during vgreduce).
Also do not calculate readahead in every lv_info call, we only need
to cache PV readahead before activation calls which locks memory.
When we are stacking LV over device, which has for some reason
increased read_ahead (e.g. MD RAID), the read_ahead hint
for libdevmapper is wrong (it is zero).
If the calculated read_ahead hint is zero, patch uses read_ahead of underlying device
(if first segment is PV) when setting DM_READ_AHEAD_MINIMUM_FLAG.
Because we are using dev-cache, it also store this value to cache for future use
(if several LVs are over one PV, BLKRAGET is called only once for underlying device.)
This should fix all the reamining problems with readahead mismatch reported
for DM over MD configurations (and similar cases).
Current code, when need to ensure that volume is not
active on remote node, it need to try to exclusive
activate volume.
Patch adds simple clvmd command which queries all nodes
for lock for given resource.
The lock type is returned in reply in text.
(But code currently uses CR and EX modes only.)
Currently code uses pv_dev_name() for hash when getting internal
"pvX" name.
This produce corrupted metadata if PVs are missing, pv->dev
is NULL and all these missing devices returns one name
(using "unknown device" for all missing devices as hash key).
We can temporarily violate max_lv during mirror conversion etc.
(If the operation fails, orphan mirror images are visible to administrator
for manual remove for example. Not that this should ever happen:-)
Force limit only for lvcreate (and vg merge) command.
Patch also adds simple max_lv tests into testsuite
