IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Run umount code only when either thin data or metadata are
above 95% - so if there are resize failures with 60%.
system fill keep running.
Also umount will only be tried with lvm2 LVs.
Foreign users are ATM unsuppored.
The DM_REPORT_OUTPUT_MULTIPLE_TIMES instructs reporting code to
keep rows even after dm_report_output call - the rows are not
destroyed in this case which makes it possible to call dm_report_output
multiple times.
log_print is used during cmd line processing to log the result of the
operation (e.g. "Volume group vg successfully changed" and similar).
We don't want output from log_print to be interleaved with current
reports from group where log is reported as well. Also, the information
printed by log_print belongs to the log report too, so it should be
rerouted to log report if it's set.
Since the code in libdm-report which is responsible for doing the report
output uses log_print too, we need to use a different kind of log_print
which bypasses any log report currently used for logging (...simply,
we can't call log_print to output the log report itself which in turn
would again reroute to report - the report would never get on output
this way).
This patch introduces DM_REPORT_GROUP_JSON report group type. When using
this group type and when pushing a report to such a group, these flags
are automatically unset:
DM_REPORT_OUTPUT_ALIGNED
DM_REPORT_OUTPUT_HEADINGS
DM_REPORT_OUTPUT_COLUMNS_AS_ROWS
...and this flag is set:
DM_REPORT_OUTPUT_BUFFERED
The whole group is encapsulated in { } for the outermost JSON object
and then each report is reported on output as array of objects where
each object is the row from report:
{
"report_name1": [
{field1="value", field2="value",...},
{field1="value", field2="value",...}
...
],
"report_name2": [
{field1="value", field2="value",...},
{field1="value", field2="value",...}
...
]
...
}
This patch introduces DM_REPORT_GROUP_BASIC report group type. This
type has exactly the classical output format as we know from before
introduction of report groups. However, in addition to that, it allows
to put several reports into a group - this is the very basic grouping
scheme that doesn't change the output format itself:
Report: report1_name
Header1 Header2 ...
value value ...
value value ...
... ... ...
Report: report2_name
Header1 Header2 ...
value value ...
value value ...
... ... ...
There's no change in output for this report group type - with this type,
we only make sure there's always only one report in a group at a time,
not more.
This patch introduces DM report group (represented by dm_report_group
structure) that is used to group several reports to make a whole. As a
whole, all the reports in the group follow the same settings and/or
formatting used on output and it controls that the output is properly
ordered (e.g. the output from different reports is not interleaved
which would break readability and/or syntax of target output format
used for the whole group).
To support this feature, there are 4 new functions:
- dm_report_group_create
- dm_report_group_push
- dm_report_group_pop
- dm_report_group_destroy
From the naming used (dm_report_group_push/pop), it's clear the reports
are pushed onto a stack. The rule then is that only the report on top
of the stack can be reported (that means calling dm_report_output).
This way we make sure that the output is not interleaved and provides
determinism and control over the output.
Different formats may allow or disallow some of the existing report
flags controlling output itself (DM_REPORT_OUTPUT_*) to be set or not so
once the report is pushed to a group, the grouping code makes sure that
all the reports have compatible flags set and then these flags are
restored once each report is popped from the report group stack.
We also allow to push/pop non-report item in which case such an item
creates a structure (e.g. to put several reports together with any
opening and/or closing lines needed on output which pose as extra
formatting structure besides formatting the reports).
The dm_report_group_push function accepts an argument to pass any
format-specific data needed (e.g. handle, name, structures passed
along while working with reports...).
We can call dm_report_output directly anytime we need (with the only
restriction that we can call dm_report_output only for the report that
is currently on top of the group's stack). Or we don't need to call
dm_report_output explicitly in which case all the reports in a stack are
reported on output automatically once we call dm_report_group_destroy.
This reverts commit 8fd886f735.
This was a deliberate omission because logging token-by-token metadata
parsing greatly increases the amount of logging for hardly any benefit.
In general, only LVM config file settings need to be logged, and in
places where it's considered important to log particular elements of
metadata that should be done using specific log_* lines.
This area can be revisited.
When dm_tree_find_node_by_uuid() fails to find passed uuid,
report in lof_debug the complete original uuid,
not the one stripped of LVM- prefix.
TODO: inspect manipulation with LVM- prefix here.
Fix parsing of 'Fail' status (using capital letter) for thin-pool.
Add also parsing of 'Error' state for thin-pool.
Add needs_check test for thin-pool.
Detect Fail state for thin.
Fixing regression caused by 197b5e6dc7.
So the 'TODO' part now finally know the answer - there is 'sparc64'
architecture which imposes limitation to read 64b words only through
64b aligned address.
Since we never could know how is the user going to use the returned
pointer and the userusually expects it's aligned on the highest CPU
required alignement, preserve it also for char*.
Fixes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=809685
Reported-by: Anatoly Pugachev <matorola@gmail.com>
Wrong thin-pool feature flag ordering in dm table: It will lead to
unnecessary table reload.
Fix it by placeing feature flags in order they are returned from the
kernel so current 'table line diff' code will not see a difference.
Reinstate and extend checks removed by e1b111b02a.
The code has always assumed that only root has access to the directory
containing the fifos and that they are under the complete control of
dmeventd code. If anything is found not to be as expected, then open()
should certainly not be attempted!
When preloading thin-pool device node for already
existing/running thin-pool do not resume such thin-pool.
This allows to properly schedule commit point for metadata,
when thin-pool data or metadata volume is resized.
Extra space between 'cache' target and metadata device caused
string comparation being not equal and thus always causing
table reload even when uneeded.
If plugin's lvm command execution fails too often (>10 times),
there is no point to torture system more then necessary, just log
and drop monitoring in this case.
Improve event string parser to avoid unneeded alloc+free.
Daemon talk function uses '-' to mark NULL/missing field.
So restore the NULL pointer back on parser.
This should have made old tools like 'dmevent_tool' work again.
As now 'uuid' or 'dso' could become NULL and then be
properly used in _want_registered_device() function.
Since lvm2 always fill these parameters, this change should
have no effect on lvm2.
Add more functionality to size_changed function.
While 'existing' API only detected 0 for
unchanged, and !0 for changed,
new improved API will also detected if the
size has only went bigger - or there was
size reduction.
Function work for the whole dm-tree - so
no change is size is always 0.
only size extension 1.
and if some size reduction is there - returns -1.
This result can be used for better evaluation
whether we need to flush before suspend.
Implementing exit when 'dmeventd' is idle.
Default idle timeout set to 1 hour - after this time period
dmeventd will cleanly exit.
On systems with 'systemd' - service is automatically started with
next contact on dmeventd communication socket/fifo.
On other systems - new dmeventd starts again when lvm2 command detects
its missing and monitoring is needed.
Add support to unmonitor device when monitor recognizes there is
nothing to monitor anymore.
TODO: possibly API change with return value could be also used.
Redesign threading code:
- plugin registration runs within its new created thread for
improved parallel usage.
- wait task is created just once and used during whole plugin lifetime.
- event thread is based over 'events' filter being set - when
filter is 0, such thread is 'unused'.
- event loop is simplified.
- timeout thread is never signaling 'processing' thread.
- pending of events filter cnange is properly reported and
running event thread is signalled when possible.
- helgrind is not reporting problems.
Need here to keep control device opened while there is 'any' dso
plugin loaded - otherwise there would a race closing controlfd
inside lvm2 plugin while some other monitoring thread would
tried to execute another WAITEVENT task.
