IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The main problem with these bugs was that the newly split
off LV was not being suspended properly. This meant that
the memlock count was not being balanced, the DM devices
were not being renamed, and some DM devices which should
have been removed were not.
I've also renamed some of the variables and added comments
to make things clearer as to what is going on. (I can break
this patch in two if it means easier review.)
Switch dmeventd to use dm_create_lockfile and drop duplicate code.
Allow clvmd pidfile to be configurable.
Switch cmirrord and clvmd to use dm_create_lockfile.
This should bring less confusion when there are some settings left and
people just forgot about it and then they run into problems. These messages
should give them a hint of what's really going on.
even though there was no log. A simple run through the in-tree test
suite would have caught this. :(
- if (lv_is_mirrored(detached_log_lv) &&
+ if (detached_log_lv && lv_is_mirrored(detached_log_lv) &&
Also, made some cosmetic changes suggested by kabi after my last check-in
(e.g. s/return 0/return_0/ and adding an error message).
A previous check-in added logic to handle the case where both images
of a mirrored log failed. It solved the problem by simply removing
the log entirely - leaving the parent mirror with a 'core' log. This
worked for most cases. However, if there was a small delay between
the failures of the two mirrored log devices, the mirror would hang,
LVM would hang, and no additional LVM commands could be issued.
When the first leg of the log fails, it signals the need for repair.
Before 'lvconvert --repair' is run by dmeventd, the second leg fails.
'lvconvert' would see both devices as failed and try to remove the
log entirely. When it came time to suspend the parent mirror to
update the configuration, the suspend would hang because it couldn't
get any I/O through the mirrored log, which was plugged waiting for
corrective action. The solution is to replace the log with an error
target to clear any pending writes before removing it. This allows
the parent mirror to suspend and make the proper changes.
Pass metadataignore through PV creation / setup paths.
As a result of this cleanup, we can remove the unnecessary setting
of mda_ignore bits inside pvcreate_single(), after call to pv_create.
For now, just set metadataignore to '0' in some places. This is
equivalent to the prior functionality, although the 0 is given
by the caller not hardcoded in _mda_setup() call.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
- If a PV contained empty mdas, the auto-recovery code was not kicking in.
- The 'inconsistent' state was getting lost when metadata was cached so
recovery didn't kick in. But leave the behaviour alone when using
precommitted metadata because of a warning in a confusing FIXME.
In my testing, pvs and vgs didn't repair inconsistent metadata like they
used to do. (How many other tools fail similarly now?)
And there should be no need to cache inconsistent metadata because it is
supposed to get repaired under the protection of a write lock immediately it is
discovered.
This code is in need of a redesign based on first principles.
I still see bugs in this code and this commit is risky.
Allow metadataignore flag to be passed in to pvcreate.
Ideally, more refactoring of the mda allocation / initialization
is warranted, but for now, we just add another parameter to 'add_mda'
to take an existing mda ignored flag. We need to do this or pv_write
loses the state of the mda 'ignored' flag before copying and writing
to disk.
Print device name when setting or clearing metadata ignore bit.
Example:
label/label.c:160 /dev/loop2: lvm2 label detected
cache/lvmcache.c:1136 lvmcache: /dev/loop2: now in VG #orphans_lvm2 (#orphans_lvm2)
metadata/metadata.c:4142 Setting mda ignored flag for metadata_locn /dev/loop2.
format_text/text_label.c:318 Skipping mda with ignored flag on device /dev/loop2 at offset 4096
Logging isn't ideal, especially for mda_set_ignore. Ideally we'd
like to display the device name and offset in this case but this
requires a bit more work and a per-format 'mda_description' function
pointer definition (we don't have access to mda_context in
metadata.c).
In preparation to call this from both pvcreate as well as pvchange,
move the guts of metadataignore into a library function.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
There's an intermittent failure with vgcfgbackup that seems to have been
introduced with the metadataignore / vgmetadatacopies patchset.
Intermittent failures are often the result of uninitialized data,
so this patch calls zalloc in a few places it might matter.
Allowing an 'all' and 'unmanaged' value is more intuitive, and
provides a simple way for users to get back to original LVM behavior
of metadata written to all PVs in the volume group.
If the user requests "--vgmetadatacopies unmanaged", this instructs
LVM not to manage the ignore bits to achieve a specific number of
metadata copies in the volume group. The user is free to use
"pvchange --metadataignore" to control the mdas on a per-PV basis.
If the user requests "--vgmetadatacopies all", this instructs LVM
to do 2 things: 1) clear all ignore bits, and 2) set the "unmanaged"
policy going forward.
Internally, we use the special MAX_UINT32 value to indicate 'all'.
This 'just' works since it's the largest value possible for the
field and so all 'ignore' bits on all mdas in the VG will get
cleared inside _vg_metadata_balance(). However, after we've
called the _vg_metadata_balance function, we check for the special
'all' value, and if set, we write the "unmanaged" value into the
metadata. As such, the 'all' value is never written to disk.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
The check in vg_split_mdas will trigger an error if the 'from' vg
list is empty. However, this might be ok in some instances now
that we have ignored mdas. Relax this check so an error is triggered
only in the case where there's truly no more mdas in the 'from'
vg.
One example of where this makes a difference is with vgreduce.
If we try to vgreduce a PV with un-ignored mdas, this should trigger
the balancing function to un-ignore mdas on another PV in the VG.
However, we don't get to vg_write() before we fail because this
list size check fails, and we see an error message indicating:
"Cannot remove final metadata area ..."
Another example is with vgsplit into a new VG, where the PVs
being moved contain all ignored mdas. We must move the mdas on
fid->metadata_areas_ignored from 'vg_from' to 'vg_to'.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
The vgextend path calls add_pv_to_vg(). Inside add_pv_to_vg(),
we must ensure we pass the correct mdas list into pv_setup(), as
copies of mdas are placed on the vg->fid list. If we don't place
the mdas on the correct vg->fid list, the various counts may be
incorrect and the metadata balance algorithm will not work when
called from vg_write() path.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Compare the value of the newly added vg_mda_copies field
(--vgmetadatacopies parameter) with the current count of
in-use mdas and ignoring or unignoring mdas as necessary to
get to the target count. Also, as a safety check before
returning, ensure we have at least one mda enabled.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
This patch adds the ability to read/write the vg->mda_copies values
from/to the vg metadata.
If we read the VG metadata and this field does not exist, we set
mda_copies to the default value of 0. Later in the code, we use
this special '0' value to indicate a disable of metadata balancing.
This should preserve existing LVM behavior and ensure metadata balancing
can be turned off should the need arise.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
This patch adds the get and partially implemented set function.
The 'set' function should probably ignore or un-ignore metadata areas
based on new values.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Add a field to struct volume_group to later implement metadata
balancing:
- mda_copies: target # of non-ignored mdas in the VG; default 0 (do
not control pv 'ignore mdas' bit.
This patch just adds the parameter to the structures with the default
values but does not modify any commands. Should be no functional change.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Arrange mdas so mdas that are to be ignored come first. This is an
optimization that ensures consistency on disk for the longest period of time.
This was noted by agk in review of the v4 patchset of pvchange-based mda
balance.
Note the following example for an explanation of the background:
Assume the initial state on disk is as follows:
PV0 (v1, non-ignored)
PV1 (v1, non-ignored)
PV2 (v1, non-ignored)
PV3 (v1, non-ignored)
If we did not sort the list, we would have a commit sequence something like
this:
PV0 (v2, non-ignored)
PV1 (v2, ignored)
PV2 (v2, ignored)
PV3 (v2, non-ignored)
After the commit of PV0's mdas, we'd have an on-disk state like this:
PV0 (v2, non-ignored)
PV1 (v1, non-ignored)
PV2 (v1, non-ignored)
PV3 (v1, non-ignored)
This is an inconsistent state of the disk. If the machine fails, the next
time it was brought back up, the auto-correct mechanism in vg_read would
update the metadata on PV1-PV3. However, if possible we try to avoid
inconsistent on-disk states. Clearly, because we did not sort, we have
a greater chance of on-disk inconsistency - from the time the commit of
PV0 is complete until the time PV3 is complete.
We could improve the amount of time the on-disk state is consistent by simply
sorting the commit order as follows:
PV1 (v2, ignored)
PV2 (v2, ignored)
PV0 (v2, non-ignored)
PV3 (v2, non-ignored)
Thus, after the first PV is committed (in this case PV1), on-disk we would
have:
PV0 (v1, non-ignored)
PV1 (v2, ignored)
PV2 (v1, non-ignored)
PV3 (v1, non-ignored)
This is clearly a consistent state. PV1 will be read but the mda will be
ignored. All other PVs contain v1 metadata, and no auto-correct will be
required. In fact, if we commit all PVs with ignored mdas first, we'll
only have an inconsistent state when we start writing non-ignored PVs,
and thus the chances we'll get an inconsistent state on disk is much
less with the sorted method.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
When we are constructing the vg, we may need to adjust the list of
metadata_areas if there are ignored mdas. At label read time, we
do not read the metadata of ignored mdas, and as a result, they do
not get placed on vg->fid->metadata_areas inside _text_create_text_instance
since lvmcache does not have these areas attached to vginfo->infos.
However, when we're checking the pvids inside _vg_read, after having
read another metadata area from another PV, we do have the opportunity
to update the metadata_area and metadata_areas_ignored lists based
on the read metadata_area. We need accurate mda lists for the reporting
functions that count the ignored mdas, as well as general correctness
of mda balancing.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
With the addition of ignored mdas, we replace all checks for an empty
mda list with a new function to look for either an empty mda list or
ignored mdas.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Add a helper function to consolidate checking for an empty mdas list
or ignored mdas. Ignored mdas should behave almost identically to
an empty mda list - the metadata areas should not be read or written
to. This function will make it easier to implement metadata balancing
and easier to track pvs with an empty mda list or ignored mdas.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
We implement ignore of an mda at label_read time by checking for
the ignore bit, and then skipping the reading of the vgname and
other information in the metadata. This will have an effect similar
to a PV found with no mdas. Thus, it will look like an orphan in the
cache until we scan the rest of the system and find a PV with
metadata, and the mda will not be on the vg->fid->metadata_areas
list so no read/writes will be done to the metadata area.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Define a new pvs field, pv_mda_used_count, and a new vgs field,
vg_mda_used_count to match the existing pv_mda_count and vg_mda_count.
These new fields count the number of mdas that have the 'ignored' bit
clear (they are in use on the PV / VG). Also define various supporting
functions to implement the counting as well as setting the ignored
flag and determining if an mda is ignored. These high level functions
call into the lower level location independent mda ignore functions
defined by earlier patches.
Note that counting ignored mdas in a vg requires traversing both lists
and checking for the ignored bit on the mda. The count of 'ignored'
mdas then is defined by having the bit set, not by which list the mda
is on. The list does determine whether LVM actually does read/write to
the mda, though we must count the bits in order to return accurate numbers
for the various counts. Also, pv_mda_set_ignored must search both vg
lists for ignored mda. If the state changes and needs to be committed
to disk, the ignored mda will be on the non-ignored list.
Note also in pv_mda_set_ignored(), we must properly manage the mda lists.
If we change the ignored state of an mda, we must change any mdas on
vg->fid->metadata_areas that correspond to this pv. Also, we may
need to allocate a copy of the mda, as is done when fid->metadata_areas
is populated from _vg_read(), if we are un-ignoring an ignored mda.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Add a second mda list, metadata_areas_ignored to fid, and a couple
functions, fid_add_mda() and fid_add_mdas() to help manage the lists.
These functions are needed to properly count the ignored mdas and
manage the lists attached to the 'fid' and ultimately the 'vg'.
Ensure metadata_areas_ignored is initialized in other formats, even
if the list is never used.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Because of the way mdas are handled internally, where a PV in a VG
has mdas on both info->mdas and vg->fid->metadata_areas list, we
need a location independent copy constructor for struct
metadata_area. Break up the existing format-text specific copy
constructor into a format independent piece and a format dependent
piece.
This function is necessary to properly implement pv_set_mda_ignored().
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Reviewed-by: Alasdair G Kergon <agk@redhat.com>
A metadata_area is defined independent of the location. One downside
is that there is no obvious mapping from a pv to an mda. For a PV in
a VG, we need a way to start with a PV and end up with an MDA, if we
are to manage mdas starting with a device/pv. This function provides
us a way to go down the list of PVs on a VG, and identify which ones
match a particular PV.
I'm not entirely happy with this approach, but it does fit into the
existing structures in a reasonable way.
An alternative solution might be to refactor the VG - PV interface such
that mdas are a list tied to a PV. However, this seemed a bit tricky since
a PV does not come into existence until after the list of mdas is
constructed (see _vg_read() - we create a 'fid' and attach mdas to it,
then we go through them and attach pvs).
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Reviewed-by: Alasdair G Kergon <agk@redhat.com>
We'd like to pass in mda_header to vgname_from_mda(). In order to
do this, we need to call raw_read_mda_header() from text_label.c,
_text_read(), which gets called from the label_read() path, and
peers into the metadata and update vginfo cache. We should check
the disable bit here, and if set, not peer into the vg metadata,
thus reducing the I/O to disk.
In the process, move vgname_from_mda() to layout.h, since the fn
only gets called from format_text code, and we need the mda_header
definition from the private layout.h.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
This refactoring moves the device open/close up one level to the caller of
_vg_read_raw_area(). Should be no functional change and facilitate future
changes related to metadata balancing.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
First we add a 'flags' field to the location independent
metadata_area structure, and a MDA_IGNORE flag. The
mda_is_ignored and mda_set_ignored functions are added to
manage the flag. Adding the flag and functions gives a
library interface to ignore metadata areas independent of
the underlying location (disk, file, etc). The location
specific read/write functions must then handle the specifics
of what this flag means to the location.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Reviewed-by: Alasdair G Kergon <agk@redhat.com>
Adding a flag to the 'rlocn' structure in the mda header of the
text format allows us to flip a bit to ignore an area on disk that
stores the metadata via the text format specific mda_header.
This patch defines the flag and access functions to manage the flag.
Other patches will manage the ignore on a format-independent basis,
by using a flag in the metadata_area structure.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Future patches will make use of a specific flag in the on-disk 'raw_locn'
structure to enable/disable metadata areas, and facilitate metadata
balancing.
Note that 'filler' is always set to '0' (see add_mda() - memset),
so use of this area as a non-zero flags field is a safe way to
provide future code features.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
The same region size is used for both mirror volume and mirrored
log volume, but when the physical extent size is bigger than region size,
the size of mirror leg for mirrored log is smaller than the region size
and lvcreate command fails.
This patch adjusts a region size of mirrored log to a smaller value of
region size or physical extent size.
[This patch ensures that the region_size of the mirrored log does not
exceed the size of the mirrored log itself, which would violate the
kernel constraint: (region_size <= ti->len).]
Signed-off-by: Takahiro Yasui <takahiro.yasui@hds.com>
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Preload libc.mo file for localized lvm before taking memory lock - this way
we prevent disk access for some error paths in libdm, that prints localized
errno messages while they are still in memory locked state.
converting from 2-way to 3-way mirror (collapse_mirrored_lv)
was calling '_remove_mirror_images' with the 'remove_log'
parameter set. When the code was put in to fix 599898 to
honor log parameters during conversion, this argument was
suddenly being honored. Thus, when someone would convert from
a 2-way to 3-way mirror, the log would get removed.
'collapse_mirrored_lv' should not be calling '_remove_mirror_images'
with 'remove_log' set.
to 3-way mirror. When conversion operations are performed on
these types of mirrors, log options can be confused/ignored.
In the case of a converting 3-way mirror, we have a top-level
2-way corelog mirror whose legs are 1) a 2-way disk-log mirror
and 2) a linear device. If we wish to convert this 3-way mirror
to a 2-way mirror, the linear device is removed and the extra
top layer is eliminated. If we also wished to convert the disk
log to a core log in the same step, ambiguity creeps in. It is
somewhat obvious what the user wants - a 2-way mirror with a
corelog. However, looking at the top level mirror before
compression, it seems that the mirror already has a core log.
This is why the operation seemed to fail.
This patch simply re-evaluates what mirrored_seg points to after
a compression and then considers the log argument.
This is a fix for bug 599898.
Code is mixing up internal DLM and LVM definitions of lock
modes and flags.
OpenAIS and singlenode locking do not depend on DLM but
code currently cannot be compiled without libdlm.h!
LCK_* flags is LVM abstraction, used through all the code.
Only low-level backend (clvmd-cman etc) should use DLM definitions,
also this code should do all needed conversions.
Because there are two DLM flags used in generic code
(NOQUEUE, CONVERT) we define it similar way like lock modes.
(So all needed binary-compatible flags are on one place in locking.h)
(Further code cleaning still needed, though:-)
Adding function _add_partial_replicator_to_dtree() to create
partial tree for Replicator target.
Using dm_tree_node_set_presuspend_node() for Replicator.
Introduce struct cmd_vg to store information about needed
volume group name, vgid, flags and the pointer to opened VG.
Keep VGs list in alphabetical order for locking order.
Introduce functions:
cmd_vg_add() add new cmd_vg entry.
cmd_vg_lookup() search cmd_vgs for vg_name.
cmd_vg_read() open VGs in cmd_vgs list.
cmd_vg_release() close VGs in reversed order.
Add pointer to linked list of opened VGs. List temporarily keeps
the information about needed or locked and opened VGs for replicator target.
Also add cmd_missing_vgs flag information for quick check and
also for possible continuos process_each_lv() usage where we need
to detect whether failure has been caused by missing VG or
some other reason.
Adding configure.in support for Replicators.
Adding basic lib lvm support for Replicators.
Adding flags REPLICATOR and REPLICATOR_LOG.
Adding segments SEG_REPLICATOR and SEG_REPLICATOR_DEV.
Adding basic methods for handling replicator metadata.
Some commands start with a pvname, but we'd like to force users to
start with a vg handle to obtain a pv handle. Our best option seems
to be providing a way to look up the vgname from the pvname, and then
require them to use vg_read/vg_open.
In addition to the pvname lookup function, this patch also provides a
lookup by pvid. The lookup by pvid can be used in conjunction with
lvmcache_get_pvids to process all pvs in the system.
The pvid find function first calls lvmcache_vgname_from_pvid, which may
cause the label to be read if it is not in the cache. If the vgname is
returned is an orphan, we then check to see if there are metadata areas,
and if not, we scan every PV on the system by calling scan_vgs_for_pvs().
In most cases we should not need to do this, and by using the info->mdas
count, we avoid calling pv_read() as prior code did. So this patch is a
bit cleaner and should allow us to refactor more of the pv code.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
are active mirrors or snapshots.
We don't have the mechanisms in place to change the device-mapper
tables for those targets that have behavioral differences between
cluster and single machine instances. Allowing users to change
the attribute but not changing the target's behavior can lead to
data corruption.
The following bugs are fixed/avoided by this patch:
235123 - vgchange -c [ny] do not change target types when necessary
289331 - RFE: switching from cluster domain to local domain needs to deactivate volume somehow
289541 - when changing from local to cluster, volumes can not appear to be deactivated
This should avoid various races between dmeventd on multiple nodes
in cluster where one node already repairing device and another
run full scan and locks the device.
the device cache file is dumped both in vgscan and clvmd process.
Unfortunately, clvmd calls lvmcache_label_scan,
it properly destroys persistent filter, but during
persistent_filter_dump it merges old cache content back!
This causes that change in filters is not properly propagated
into device cache after vgscan on cluster.
(Only new devices are added.)
https://bugzilla.redhat.com/show_bug.cgi?id=591861
A shortcut for --ignorelockingfailure, --ignoremonitoring, --poll n options
and LVM_SUPPRESS_LOCKING_FAILURE_MESSAGES environment variable used all at
once in initialisation scripts (e.g. rc.sysinit or initrd).
Target install_dm_plugin installs files to libdir/device-mapper.
Target install_lvm2_plugin installs files to libdir/lvm2.
Both targets creates relative links to libdir to keep the code
compatible with current dlopen handling.
Once we will be able to read plugins from subdir, links
could be removed.
being able to remove more images from a mirror than the
number of PVs directly specified for removal.
The effort to fix bug 581611 corrected a bug that was unnoticed
at the time. The loop in _remove_mirror_images that looks over
the specified PVs was allowing devices that were previously
counted and moved to the end of the list to be double-counted.
This resulted in the number of devices needed for removal always
being satisfied - even if the user did not specify enough PVs
for removal to satisfy the request. When 581611 was fixed, this
double-counting no longer took place and the result was to remove
only the minimum of the number of PVs specified or the number
that was asked to be removed.
By simply always setting 'new_area_count' (as used to be done
only in the else statement), we return to the previous behavior.
Indeed, this is exactly what the double-counting was allowing
to happen before the fix of 581611.
Allow lv_remove_with_dependencies() to know the top-level LV that was
requested to be removed (otherwise it recurses and we lose context).
A merging snapshot cannot be removed directly but the associated origin
can be. Disallow removal of a merging snapshot unless the associated
origin is also being removed.
There's no need for foreign udev rules to touch LVM reserved devices
(snapshot, pvmove, _mlog, _mimage, _vorigin) even if they happen to
be visible. The same applies for /dev/disk content - no need to create
any content for these devices (and so no need to run any "blkid" etc.).
This also prevents setting any inotify "watch" from udev rules on such
devices that is a source of race conditions (the rules need to honor
DM_UDEV_DISABLE_OTHER_RULES_FLAG for this to work though).
We should write metadata into next position in the ring buffer while calling
vgrename and vgcfgrestore. At this code level (_vg_write_raw), we were not able
to determine if this is a rename or not. If yes, then accompanying VG structure
passed here has a new name set, not the old one.
When looking for a location where to put metadata next, we were given a NULL
value because of failed VG name comparison (in _find_vg_rlocn) between the
name in existing metadata and metadata we're just about to write.
This resets the position in the ring buffer, overwriting any existing metadata
(and also incorrectly updates the cache to "orphan" afterwards).
This patch just adds old_name item in struct volume_group that we can check and use
if necessary and detect renames at lower layers as well.
The same applies for vgcfgrestore, but here we're using a special value of
old_name, an empty string, to disable the check with existing metadata totally.
Internally, we used DM names instead of UUIDs while processing event
handlers. This caused problems while trying to vgrename a VG with active LVs
where the names are being changed and so the devices were not found then.
The patch also contains a little bit of refactoring, moving "build_dlid" code
found in dev_manager.c to "build_dm_uuid", now in lvm-string.c (so we have
build_dm_uuid and build_dm_name at one place).
lvm2app needs a link back to the vg in order to use the vg handle for
memory allocations as well as other things. This patch adds the field
to struct physical_volume, and sets pv->vg when reading a vg from disk or
extending a vg by using the helper function previously added,
add_pvl_to_vgs(). Moves and renames are handled with separate code
inside move_pv() and vgmerge(). Add pv->vg check to vg_validate().
A NULL value in pv->vg signifies membership in the orphan VG.
Note though in the case of pv_read() on a device with metadatacopies == 0,
more devices may need to be read for an authoritative answer.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Now that we have library functions to add/delete a pv from the vg->pvs
list, call them from everywhere.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Add a delete function to manage the vg->pvs list.
NOTE: It may be possible to do further cleanup to these add/del functions
by passing a 'pv' as input instead of 'pv_list'. The pv_list is used for
functions which do allocations (lvcreate) while other places in the code
just manage a list of 'pv' (e.g. import functions, vgextend, etc).
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Move the increment of vg->pv_count next to the place where we add to
vg->pvs. It looks safe to do this since the only caller of import_pool_vg()
calls import_pool_pvs() immediately afterward, and there is no way
import_pool_vg() can fail (always returns 1). However, if there's a
memory allocation failure inside import_pool_pvs(), we will end up with
a different count in vg->pv_count that with the original code. In any
case, vg->pv_count should be as close to dm_list_size(&vg->pvs) as
possible, as is the case everywhere else in the code.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
The dm_list * parameter is unnecessary since we are passing in 'vg'
and the only caller of import_pool_pvs() passes '&vg->pvs' in the
dm_list * parameter. Just use vg->pvs directly in the function.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Patch is inspired by Debian's extra patch.
- removes OWNER & GROUP make vars they are parts of INSTALL command.
- adds INSTALL_PROGRAM for executable, uses $(INSTALL)
- adds INSTALL_DATA for non-executable data, uses ($INSTALL)
- adds INSTALL_WDATA for writable non-executable data, uses ($INSTALL)
- adds configure option --enable-write_install - to support
installatin of writable files used by distribution
- replaces usage of ifeq @LIB_SUFFIX@ with $(LIB_SUFFIX)
- installs .a files from static builds without executable flag
- installs .a files to $(usrlibdir) instead of $(libdir)
- installs all static binaries to $(staticdir)
- create .so links for devel package in $(usrlibdir) instead of
$(libdir)
- makes .so and .so.LIB_VERSION files within builddir
- removes VERSIONED_SHLIB and created versioned LIB_SHARED automagicaly
- install LIB_SHARED via install_lib_shared target
- install plugins via install_lib_shared_plugin target
- prints whole 'install' command during installation instead of less
informative "Installing $(something) $(somewhere)"
- install multiple man pages with one INSTALL command
- use DISTCLEAN_TARGETS instead of creating multiple distclean targets
