IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Introduce 'hard limit' for max number of cache chunks.
When cache target operates with too many chunks (>10e6).
When user is aware of related possible troubles he
may increase the limit in lvm.conf.
Also verbosely inform user about possible solution.
Code works for both lvcreate and lvconvert.
Lvconvert fully supports change of chunk_size when caching LV
(and validates for compatible settings).
Some settings are not suitable for override in interactive/shell
mode because such settings may confuse the code and it may end
up with unexpected behaviour. This is because of the fact that
once we're in the interactive/shell mode, we have already applied
some settings for the shell itself and we can't override them
further because we're already using those settings to drive the
interactive/shell mode. Such settings would get ignored silently
or, in worse case, they would mess up the existing configuration.
Just for convenience to display all new configuration settings
introduced since given version (before, there was only --atversion
to display settings introduced in concrete version).
For example:
$ lvmconfig --type new --sinceversion 2.2.120
allocation {
# cache_mode="writethrough"
# cache_settings {
# }
}
global {
use_lvmlockd=0
# lvmlockd_lock_retries=3
# sanlock_lv_extend=256
use_lvmpolld=1
}
activation {
}
# report {
# compact_output_cols=""
# time_format="%Y-%m-%d %T %z"
# }
local {
# host_id=0
}
Add new profilable configurables:
allocation/cache_policy
allocation/cache_settings
and mark allocation/cache_pool_chunk_size as profilable as well.
Obsolete allocation/cache_pool_cachemode and
introduce new allocation/cache_mode instead.
Rename DEFAULT_CACHE_POOL_POLICY to DEFAULT_CACHE_POLICY.
The CFG_SECTION_NO_CHECK flag can be used to mark a section
and its whole subtree as containing settings where checks
won't be made (lvmconfig --validate).
These are setting where we don't know the names and and type
in advance and they're recognized in runtime. As we don't know
the type and name in advance, we can't do any checks here
of course.
Use this flag with great care as it disables config checks
for the whole config subtree found under such section.
This flag is going to be used by subsequent patches from
Zdenek to support some cache settings...
Before, we used general find_config_tree_node function to retrieve
array values. This had a downside where if the node was not found,
we had to insert default values directly in-situ after the
find_config_tree_node call. This way, we had two copies of default
values - one in config_settings.h and the other one directly in the
code where we found out that find_config_tree_node returned NULL and
hence we needed to fall back to defaults.
With separate find_config_tree_array used for array config values,
we keep all the defaults centrally in config_settings.h because
the new find_config_tree_array automatically returns these defaults
if it can't find any value set in the configuration.
This patch just makes the behaviour exactly the same for arrays as
for any other non-array type where we call find_config_tree_<type>
already, hence making the internal interface for handling array
values consistent with the rest of the config types.
The lvmconfig --type full is actually a combination of --type current
and --type missing together with --mergedconfig options used.
The overall outcome is a configuration tree with settings as LVM sees
it when it looks for the values - that means, if the setting is defined
in some config source (lvm.conf, --config, lvmlocal.conf or any profile
that is used), the setting is used. Otherwise, if the setting is not
defined in any part of the config cascade, the defaults are used.
The --type full displays exactly this final tree with all the values
defined, either coming from configuration tree or from defaults.
We shouldn't be adding spaces by default in output as that
may be be used already in scripts and especially for the eval
in shell scripts where spaces are not allowed between key
and value!
Add --withspaces option to lvmconfig for pretty output with
more space in for readability.
There are two basic groups of formatting flags (32 bits):
- common ones applicable for all config value types (lower 16 bits)
- type-related formatting flags (higher 16 bits)
With this patch, we initially support four new flags that
modify the the way the config value is displayed:
Common flags:
=============
DM_CONFIG_VALUE_FMT_COMMON_ARRAY - causes array config values
to be enclosed in "[ ]" even if there's only one item
(previously, there was no way to recognize an array with one
item and scalar value, hence array values with one member
were always displayed without "[ ]" which libdm accepted
when reading, but it may have been misleading for users)
DM_CONFIG_VALUE_FMT_COMMON_EXTRA_SPACE - causes extra spaces to
be inserted in "key = value" (or key = [ value, value, ... ] in
case of arrays), compared to "key=value" seen on output before.
This makes the output more readable for users.
Type-related flags:
===================
DM_CONFIG_VALUE_FMT_INT_OCTAL - prints integers in octal form with
"0" as a prefix (libdm's config reading code can handle this via
strtol just fine so it's properly recognized as number in octal
form already if there's "0" used as prefix)
DM_CONFIG_VALUE_FMT_STRING_NO_QUOTES - makes it possible to print
strings without enclosing " "
This patch also adds dm_config_value_set_format_flags and
dm_config_value_get_format_flags functions to set and get
these formatting flags.
This patch adds supporting code for handling deprecated settings.
Deprecated settings are not displayed by default in lvmconfig output
(except for --type current and --type diff). There's a new
"--showdeprecated" lvmconfig option to display them if needed.
Also, when using lvmconfig --withcomments, the comments with info
about deprecation are displayed for deprecated settings and with
lvmconfig --withversions, the version in which the setting was
deprecated is displayed in addition to the version of introduction.
If using --atversion with a version that is lower than the one
in which the setting was deprecated, the setting is then considered
as not deprecated (simply because at that version it was not
deprecated).
For example:
$ lvmconfig --type default activation
activation {
...
raid_region_size=512
...
}
$ lvmconfig --type default activation --showdeprecated
activation {
...
mirror_region_size=512
raid_region_size=512
...
}
$ lvmconfig --type default activation --showdeprecated --withversions
activation {
...
# Available since version 1.0.0.
# Deprecated since version 2.2.99.
mirror_region_size=512
# Available since version 2.2.99.
raid_region_size=512
...
}
$ lvmconfig --type default activation --showdeprecated --withcomments
activation {
...
# Configuration option activation/mirror_region_size.
# This has been replaced by the activation/raid_region_size
# setting.
# Size (in KB) of each copy operation when mirroring.
# This configuration option is deprecated.
mirror_region_size=512
# Configuration option activation/raid_region_size.
# Size in KiB of each raid or mirror synchronization region.
# For raid or mirror segment types, this is the amount of
# data that is copied at once when initializing, or moved
# at once by pvmove.
raid_region_size=512
...
}
$ lvmconfig --type default activation --withcomments --atversion 2.2.98
activation {
...
# Configuration option activation/mirror_region_size.
# Size (in KB) of each copy operation when mirroring.
mirror_region_size=512
...
}
A preparatory code for marking configuration nodes as deprecated:
- struct cfg_def_item gains 2 new fields ("deprecated_since_version" and "deprecation_comment"
- cfg* macros to handle new fields
- related config_settings.h edits to add new fields for each item (null for all at the moment)
Patch with implementation will follow...
These settings are in the "unsupported" group:
devices/loopfiles
log/activate_file
metadata/disk_areas (section)
metadata/disk_areas/<disk_area> (section)
metadata/disk_areas/<disk_area>/size
metadata/disk_areas/<disk_area>/id
These settings are in the "advanced" group:
devices/dir
devices/scan
devices/types
global/proc
activation/missing_stripe_filler
activation/mlock_filter
metadata/pvmetadatacopies
metadata/pvmetadataignore
metadata/stripesize
metadata/dirs
Also, this patch causes the --ignoreunsupported and --ignoreadvanced
switches to be honoured for all config types (lvmconfig --type).
By default, the --type current and --type diff display unsupported
settings, the other types ignore them - this patch also introduces
--showunsupported switch for all these other types to display even
unsupported settings in their output if needed.
lvmconfig --type list displays plain list of configuration settings.
Some of the existing decorations can be used (--withsummary and
--withversions) as well as existing options/switches (--ignoreadvanced,
--ignoreunsupported, --ignorelocal, --atversion).
For example (displaying only "config" section so the list is not long):
$lvmconfig --type list config
config/checks
config/abort_on_errors
config/profile_dir
$ lvmconfig --type list --withsummary config
config/checks - If enabled, any LVM configuration mismatch is reported.
config/abort_on_errors - Abort the LVM process if a configuration mismatch is found.
config/profile_dir - Directory where LVM looks for configuration profiles.
$ lvmconfig -l config
config/checks - If enabled, any LVM configuration mismatch is reported.
config/abort_on_errors - Abort the LVM process if a configuration mismatch is found.
config/profile_dir - Directory where LVM looks for configuration profiles.
$ lvmconfig --type list --withsummary --withversions config
config/checks - If enabled, any LVM configuration mismatch is reported. [2.2.99]
config/abort_on_errors - Abort the LVM process if a configuration mismatch is found. [2.2.99]
config/profile_dir - Directory where LVM looks for configuration profiles. [2.2.99]
Example with --atversion (displaying global section):
$ lvmconfig --type list global
global/umask
global/test
global/units
global/si_unit_consistency
global/suffix
global/activation
global/fallback_to_lvm1
global/format
global/format_libraries
global/segment_libraries
global/proc
global/etc
global/locking_type
global/wait_for_locks
global/fallback_to_clustered_locking
global/fallback_to_local_locking
global/locking_dir
global/prioritise_write_locks
global/library_dir
global/locking_library
global/abort_on_internal_errors
global/detect_internal_vg_cache_corruption
global/metadata_read_only
global/mirror_segtype_default
global/raid10_segtype_default
global/sparse_segtype_default
global/lvdisplay_shows_full_device_path
global/use_lvmetad
global/thin_check_executable
global/thin_dump_executable
global/thin_repair_executable
global/thin_check_options
global/thin_repair_options
global/thin_disabled_features
global/cache_check_executable
global/cache_dump_executable
global/cache_repair_executable
global/cache_check_options
global/cache_repair_options
global/system_id_source
global/system_id_file
$ lvmconfig --type list global --atversion 2.2.50
global/umask
global/test
global/units
global/suffix
global/activation
global/fallback_to_lvm1
global/format
global/format_libraries
global/segment_libraries
global/proc
global/locking_type
global/wait_for_locks
global/fallback_to_clustered_locking
global/fallback_to_local_locking
global/locking_dir
global/library_dir
global/locking_library
The settings which have their default value evaluated in runtime should
have their 'unconfigured' counterparts also evaluated in runtime since
those values can be constructed by using other settings.
For example, before this patch:
$ lvm dumpconfig --type default --unconfigured devices/cache_dir devices/cache
cache_dir="@DEFAULT_SYS_DIR@/@DEFAULT_CACHE_SUBDIR@"
cache="/etc/lvm/cache/.cache
With this patch applied:
$ lvm dumpconfig --type default --unconfigured devices/cache_dir devices/cache
cache_dir="@DEFAULT_SYS_DIR@/@DEFAULT_CACHE_SUBDIR@"
cache="@DEFAULT_SYS_DIR@/@DEFAULT_CACHE_SUBDIR@/.cache"
--withfullcomments prints all comment lines for each config option.
--withcomments prints only the first comment line, which should be
a short one-line summary of the option.
When reading VG mda from multiple PVs - do all the validation only
when mda is seen for the first time and when mda checksum and length
is same just return already existing VG pointer.
(i.e. using 300PVs for a VG would lead to create and destroy 300 config trees....)
If configuration setting is marked in config_setting.h with CFG_DISABLED
flag, default value is always used for such setting, no matter if it's defined
by user (in --config/lvm.conf/lvmlocal.conf).
A warning message is displayed if this happens:
For example:
[1] f21/~ # lvm dumpconfig --validate
WARNING: Configuration setting global/system_id_source is disabled. Using default value.
LVM configuration valid.
[1] f21/~ # pvs
WARNING: Configuration setting global/system_id_source is disabled. Using default value.
PV VG Fmt Attr PSize PFree
/dev/sdb lvm2 --- 128.00m 128.00m
...
In 2.02.99, _init_tags() inadvertently began to ignore the
dm_config_tree struct passed to it. "tags" sections are not
merged together, so the "tags" section in the main config file was
being processed repeatedly and other "tags" sections were ignored.
The dumpconfig now understands --commandprofile/--profile/--metadataprofile
The --commandprofile and --profile functionality is almost the same
with only one difference and that is that the --profile is just used
for dumping the content, it's not applied for the command itself
(while the --commandprofile profile is applied like it is done for
any other LVM command).
We also allow --metadataprofile for dumpconfig - dumpconfig *does not*
touch VG/LV and metadata in any way so it's OK to use it here (just for
dumping the content, checking the profile validity etc.).
The validity of the profile can be checked with:
dumpconfig --commandprofile/--profile/--metadataprofile --validate
...depending on the profile type.
Also, mention --config in the dumpconfig help string so users know
that dumpconfig handles this too (it did even before, but it was not
documented in the help string).
- When defining configuration source, the code now uses separate
CONFIG_PROFILE_COMMAND and CONFIG_PROFILE_METADATA markers
(before, it was just CONFIG_PROFILE that did not make the
difference between the two). This helps when checking the
configuration if it contains correct set of options which
are all in either command-profilable or metadata-profilable
group without mixing these groups together - so it's a firm
distinction. The "command profile" can't contain
"metadata profile" and vice versa! This is strictly checked
and if the settings are mixed, such profile is rejected and
it's not used. So in the end, the CONFIG_PROFILE_COMMAND
set of options and CONFIG_PROFILE_METADATA are mutually exclusive
sets.
- Marking configuration with one or the other marker will also
determine the way these configuration sources are positioned
in the configuration cascade which is now:
CONFIG_STRING -> CONFIG_PROFILE_COMMAND -> CONFIG_PROFILE_METADATA -> CONFIG_FILE/CONFIG_MERGED_FILES
- Marking configuration with one or the other marker will also make
it possible to issue a command context refresh (will be probably
a part of a future patch) if needed for settings in global profile
set. For settings in metadata profile set this is impossible since
we can't refresh cmd context in the middle of reading VG/LV metadata
and for each VG/LV separately because each VG/LV can have a different
metadata profile assinged and it's not possible to change these
settings at this level.
- When command profile is incorrect, it's rejected *and also* the
command exits immediately - the profile *must* be correct for the
command that was run with a profile to be executed. Before this
patch, when the profile was found incorrect, there was just the
warning message and the command continued without profile applied.
But it's more correct to exit immediately in this case.
- When metadata profile is incorrect, we reject it during command
runtime (as we know the profile name from metadata and not early
from command line as it is in case of command profiles) and we
*do continue* with the command as we're in the middle of operation.
Also, the metadata profile is applied directly and on the fly on
find_config_tree_* fn call and even if the metadata profile is
found incorrect, we still need to return the non-profiled value
as found in the other configuration provided or default value.
To exit immediately even in this case, we'd need to refactor
existing find_config_tree_* fns so they can return error. Currently,
these fns return only config values (which end up with default
values in the end if the config is not found).
- To check the profile validity before use to be sure it's correct,
one can use :
lvm dumpconfig --commandprofile/--metadataprofile ProfileName --validate
(the --commandprofile/--metadataprofile for dumpconfig will come
as part of the subsequent patch)
- This patch also adds a reference to --commandprofile and
--metadataprofile in the cmd help string (which was missing before
for the --profile for some commands). We do not mention --profile
now as people should use --commandprofile or --metadataprofile
directly. However, the --profile is still supported for backward
compatibility and it's translated as:
--profile == --metadataprofile for lvcreate, vgcreate, lvchange and vgchange
(as these commands are able to attach profile to metadata)
--profile == --commandprofile for all the other commands
(--metadataprofile is not allowed there as it makes no sense)
- This patch also contains some cleanups to make the code handling
the profiles more readable...
Mark profilable settings with a separate CFG_PROFILABLE_METADATA
flag where the profile can be attached to VG/LV. This makes it possible
to differentiate global command-profilable settings (CFG_PROFILABLE flag)
and contextual metadata-profilable (per VG/LV) settings (CFG_PROFILABLE_METADATA flag).
When cmd refresh is called, we need to move any already loaded profiles
to profiles_to_load list which will cause their reload on subsequent
use. In addition to that, we need to take into account any change
in config/profile configuration setting on cmd context refresh
since this setting could be overriden with --config.
Also, when running commands in the shell, we need to remove the
global profile used from the configuration cascade so the profile
is not incorrectly reused next time when the --profile option is
not specified anymore for the next command in the shell.
This bug only affected profile specified by --profile cmd line
arg, not profiles referenced from LVM metadata.
Before, the cft_check_handle used to direct configuration checking
was part of cmd_context. It's better to attach this as part of the
exact config tree against which the check is done. This patch moves
the cft_check_handle out of cmd_context and it attaches it to the
config tree directly as dm_config_tree->custom->config_source->check_handle.
This change makes it easier to track the config tree check results
and provides less space for bugs as the results are directly attached
to the tree and we don't need to be cautious whether the global value
is correct or not (and whether it needs reinitialization) as it was
in the case when the cft_check_handle was part of cmd_context.
Add CONFIG_FILE_SPECIAL config source id to make a difference between
real configuration tree (like lvm.conf and tag configs) and special purpose
configuration tree (like LVM metadata, persistent filter).
This makes it easier to attach correct customized data to the config
tree that is created out of the source then.
The same as for allocation/thin_pool_chunk_size - the default value
used is just a starting point. The calculation continues using the
properties of the devices actually used.
The allocation/thin_pool_chunk_size is a bit more complex. It's default
value is evaluated in runtime based on selected thin_pool_chunk_size_policy.
But the value is just a starting point. The calculation then continues
with dependency on the properties of the devices used. Which means for
such a default value, we know only the starting value.
The devices/cache and devices/cache_dir are evaluated in runtime this way:
- if devices/cache is set, use it
- if devices_cache/dir or devices/cache_file_prefix is set, make up a
path out of that for devices/cache in runtime, taking into account
the LVM_SYSTEM_DIR environment variable if set
- otherwise make up the path out of default which is:
<LVM_SYSTEM_DIR>/<cache_dir>/<cache_file_prefix>.cache
With the runtime defaults, we can encode this easily now. Also, the lvm
dumpconfig can show proper and exact information about this setting then
(the variant that shows default values).
Previously, we declared a default value as undefined ("NULL") for
settings which require runtime context to be set first (e.g. settings
for paths that rely on SYSTEM_DIR environment variable or they depend
on any other setting in some way).
If we want to output default values as they are really used in runtime,
we should make it possible to define a default value as function which
is evaluated, not just providing a firm constant value as it was before.
This patch defines simple prototypes for such functions. Also, there's
new helper macros "cfg_runtime" and "cfg_array_runtime" - they provide
exactly the same functionality as the original "cfg" and "cfg_array"
macros when defining the configuration settings in config_settings.h,
but they don't set the constant default value. Instead, they automatically
link the configuration setting definition with one of these functions:
typedef int (*t_fn_CFG_TYPE_BOOL) (struct cmd_context *cmd, struct profile *profile);
typedef int (*t_fn_CFG_TYPE_INT) (struct cmd_context *cmd, struct profile *profile);
typedef float (*t_fn_CFG_TYPE_FLOAT) (struct cmd_context *cmd, struct profile *profile);
typedef const char* (*t_fn_CFG_TYPE_STRING) (struct cmd_context *cmd, struct profile *profile);
typedef const char* (*t_fn_CFG_TYPE_ARRAY) (struct cmd_context *cmd, struct profile *profile);
(The new macros actually set the CFG_DEFAULT_RUNTIME flag properly and
set the default value link to the function accordingly).
Then such configuration setting requires a function of selected type to
be defined. This function has a predefined name:
get_default_<id>
...where the <id> is the id of the setting as defined in
config_settings.h. For example "backup_archive_dir_CFG" if defined
as a setting with default value evaluated in runtime with "cfg_runtime"
will automatically have "get_default_backup_archive_dir_CFG" function
linked to this setting to get the default value.
To make "lvm dumpconfig --type default" output to be usable like any
other config, we need to comment out lines that have no default value
defined. Otherwise, we'd have the output with config options
with blank or zero values which is not the same as when the value
is not defined! And such configuration can't be feed into lvm again
without further edits. So let's fix this.
Currently this covers these configuration options exactly:
devices/loopfiles
devices/preferred_names
devices/filter
devices/global_filter
devices/types
allocation/cling_tag_list
global/format_libraries
global/segment_libraries
activation/volume_list
activation/auto_activation_volume_list
activation/read_only_volume_list
activation/mlock_filter
metadata/dirs
metadata/disk_areas
metadata/disk_areas/<disk_area>
metadata/disk_areas/<disk_area>/start_sector
metadata/disk_areas/<disk_area>/size
metadata/disk_areas/<disk_area>/id
tags/<tag>
tags/<tag>/host_list
