IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Refactor the recent metadata-reading optimisation patches.
Remove the recently-added cache fields from struct labeller
and struct format_instance.
Instead, introduce struct lvmcache_vgsummary to wrap the VG information
that lvmcache holds and add the metadata size and checksum to it.
Allow this VG summary information to be looked up by metadata size +
checksum. Adjust the debug log messages to make it clear when this
shortcut has been successful.
(This changes the optimisation slightly, and might be extendable
further.)
Add struct cached_vg_fmtdata to format-specific vg_read calls to
preserve state alongside the VG across separate calls and indicate
if the details supplied match, avoiding the need to read and
process the VG metadata again.
Set ACCESS_NEEDS_SYSTEM_ID VG status flag whenever there is
a non-lvm1 system_id set. Prevents concurrent access from
older LVM2 versions.
Not set on VGs that bear a system_id only due to conversion
from lvm1 metadata.
Export _lvm1_system_id as generate_lvm1_system_id and call it in
vg_setup() so it is set before writing the metadata to disk
and not missing from the initial metadata backup file.
Move the lvm1 sys ID into vg->lvm1_system_id and reenable the #if 0
LVM1 code. Still display the new-style system ID in the same
reporting field, though, as only one can be set.
Add a format feature flag FMT_SYSTEM_ON_PVS for LVM1 and disallow
access to LVM1 VGs if a new-style system ID has been set.
Treat the new vg->system_id as const.
This is addendum for commit 6dc7b783c8.
LVM1 format stores the ALLOCATABLE flag directly in PV header, not
in VG metadata. So the code needs to be fixed further to work
properly for lvm1 format so that the correct PV header is written
(the flag is set only if the PV is in some VG, unset otherwise).
DO NOT USE LVMETAD IF YOU HAVE ANY LVM1-FORMATTED PVS.
You may continue to use it without lvmetad, but do please schedule
an upgrade to the lvm2 format (with 'vgconvert').
Sending the original LVM1 formatted metadata to lvmetad is breaking
assumptions made by the code, so I am marking the format as obsolete for
now and no longer sending it to lvmetad.
This means that if you are using lvmetad, lvm1 volumes will usually
appear invisible - though not always: it depends on exactly what
sequence of commands you run!
The current situation is not satisfactory.
We'll either fix lvmetad and reenable this or we'll fix the code to
issue appropriate warning messages when lvm1 PVs are encountered
to avoid accidents.
(The latest unfixed problem is that lvmetad assumes metadata sequence
numbers exist and always increase - but the lvm1 format does not define
or store any sequence number, confusing both the daemon and client
when default values get passed to-and-fro.)
All labellers always use the "private" (void *) field as the fmt pointer. Making
this fact explicit in the type of the labeller simplifies the label reporting
code which needs to extract the format. Moreover, it removes a number of
error-prone casts from the code.
Assign fid as the last step before returning VG.
Make the format reader for 'lvm1' and 'pool' equal to 'lvm2' format reader.
It has caused memory corruption to lvmetad as it later calls
destroy_instance() to allocated fid. This patch should fix problems
with crashing test lvmetad-lvm1.sh.
...to not pollute the common and format-independent code in the
abstraction layer above.
The format1 pv_write has common code for writing metadata and
PV header by calling the "write_disks" fn and when rewriting
the header itself only (e.g. just for the purpose of changing
the PV UUID) during the pvchange operation, we had to tweak
this functionality for the format1 case and we had to assign
the PV the orphan state temporarily.
This patch removes the need for this format1 tweak and it calls
the write_disks with appropriate flag indicating whether this is
a PV write call or a VG write call, allowing for metatada update
for the latter one.
Also, a side effect of the former tweak was that it effectively
invalidated the cache (even for the non-format1 PVs) as we
assigned it the orphan state temporarily just for the format1
PV write to pass.
Also, that tweak made it difficult to directly detect whether
a PV was part of a VG or not because the state was incorrect.
Also, it's not necessary to backup and restore some PV fields
when doing a PV write:
orig_pe_size = pv_pe_size(pv);
orig_pe_start = pv_pe_start(pv);
orig_pe_count = pv_pe_count(pv);
...
pv_write(pv)
...
pv->pe_size = orig_pe_size;
pv->pe_start = orig_pe_start;
pv->pe_count = orig_pe_count;
...this is already done by the layer below itself (the _format1_pv_write fn).
So let's have this cleaned up so we don't need to be bothered
about any 'format1 special case for pv_write' anymore.
The PV header extension information (PV header extension version, flags
and list of Embedding Area locations) is stored just beyond the PV header base.
When calculating the Embedding Area start value (ea_start), the same logic is
used as when calculating the pe_start value for Data Area - the value must
follow exactly the same alignment restrictions for its start value
(the alignment detected automatically or provided via command line using
the --dataalignment and --dataalignmentoffset arguments).
The Embedding Area is placed at the very start of the PV, starting at
ea_start. The Data Area starting at pe_start is placed next. The pe_start is
still properly aligned. Due to the pe_start alignment, it's possible that the
resulting Embedding Area size (ea_size) ends up bigger in size than requested
(but never less than requested).
New tools with PV header extension support will read the extension
if it exists and it's not an error if it does not exist (so old PVs
will still work seamlessly with new tools).
Old tools without PV header extension support will just ignore any
extension.
As for the Embedding Area location information (its start and size),
there are actually two places where this is stored:
- PV header extension
- VG metadata
The VG metadata contains a copy of what's written in the PV header
extension about the Embedding Area location (NULL value is not copied):
physical_volumes {
pv0 {
id = "AkSSRf-difg-fCCZ-NjAN-qP49-1zzg-S0Fd4T"
device = "/dev/sda" # Hint only
status = ["ALLOCATABLE"]
flags = []
dev_size = 262144 # 128 Megabytes
pe_start = 67584
pe_count = 23 # 92 Megabytes
ea_start = 2048
ea_size = 65536 # 32 Megabytes
}
}
The new metadata fields are "ea_start" and "ea_size".
This is mostly useful when restoring the PV by using existing
metadata backups (e.g. pvcreate --restorefile ...).
New tools does not require these two fields to exist in VG metadata,
they're not compulsory. Therefore, reading old VG metadata which doesn't
contain any Embedding Area information will not end up with any kind
of error but only a debug message that the ea_start and ea_size values
were not found.
Old tools just ignore these extra fields in VG metadata.
Move commod code to destroy orphan VG into free_orphan_vg() function.
Use orphan vgmem for creation of PV lists.
Remove some free_pv_fid() calls (FIXME: check all of them)
FIXME: Check whether we could merge release_vg back again for all VGs.
This is essential for proper format instance ref_count support. We must
use these functions to set the fid everywhere from now on, even the NULL
value!
Format instances can be created anytime on demand and it contains
metadata area information mostly (at least for now, but in the future,
we may store more things here to update/edit in a PV/VG). In case we
have lots of metadata areas, memory consumption will rise. Using cmd
context mempool is not quite optimal here because it is destroyed too
late. So let's use a separate mempool for format instances.
Reference counting is used because fids could be shared, e.g. each PV
has either a PV-based fid or VG-based fid. If it's VG-based, each PV has
a shared fid with the VG - a reference to VG's fid.
Create new function alloc_vg() to allocate VG structure.
It takes pool_name (for easier debugging).
and also take vg_name to futher simplify code.
Move remainder of _build_vg_from_pds to _pool_vg_read
and use vg memory pool for import functions.
(it's been using smem -> fid mempool -> cmd mempool)
(FIXME: remove mempool parameter for import functions and use vg).
Move remainder of the _build_vg to _format1_vg_read
Add a small fix that preserves pe_start for lvm1 PVs when being converted.
(this fix needs to be replaced with something more clever, but let's have this working now)
Add supporting functions to work with the format instance and metadata area
structures stored within the format instance. Add support for simple indexing
of metadata areas using PV id and mda order (for on-disk PV only for now, we
can extend the indexing even for other mdas if needed - we only need to define
a proper key for the index).
As const segment_type or const format_type are never released
use their non-const version and remove const downcast from dm_free calls.
This change fixes many gcc warnings we were getting from them.
In other LVM memory structures such as volume_group, the field
used to store flags is called "status", and on-disk fields are called
'flags', so rename the one inside metadata_area to be consistent.
Not only is it more consistent with existing code but is cleaner
to say "the status of this mda is ignored".
Background for this patch - prajnoha pinged me on IRC this morning
about a fix he was working on related to metadataignore when
metadata/dirs was set. I was reviewing my patches from this year
and realized the 'flags' field was probably not the best choice
when I originally did the metadataignore patches.
Current lvm1 allocation code seems to not properly
map segments on missing PVs.
For now disable this functionality.
(It never worked and previous commit just introduced segfault here.)
So the partial mode in lvm1 can only process missing PVs
with no LV segments only.
Also do not use random PV UUID for missing part but use fixed
string derived from VG UUID (to not confuse clvmd tests).
If some lvm1 device is missing, lvm fails on all operations
# vgcfgbackup -f bck -P vg_test
Partial mode. Incomplete volume groups will be activated read-only.
3 PV(s) found for VG vg_test: expected 4
PV segment VG free_count mismatch: 152599 != 228909
PV segment VG extent_count mismatch: 152600 != 228910
Internal error: PV segments corrupted in vg_test.
Volume group "vg_test" not found
Allow loading of lvm1 partial VG by allocating "new" missing PV,
which covers lost space. Also this fake mising PV inform code
that it is partial VG.
https://bugzilla.redhat.com/show_bug.cgi?id=501390
Pass metadataignore through PV creation / setup paths.
As a result of this cleanup, we can remove the unnecessary setting
of mda_ignore bits inside pvcreate_single(), after call to pv_create.
For now, just set metadataignore to '0' in some places. This is
equivalent to the prior functionality, although the 0 is given
by the caller not hardcoded in _mda_setup() call.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Add a second mda list, metadata_areas_ignored to fid, and a couple
functions, fid_add_mda() and fid_add_mdas() to help manage the lists.
These functions are needed to properly count the ignored mdas and
manage the lists attached to the 'fid' and ultimately the 'vg'.
Ensure metadata_areas_ignored is initialized in other formats, even
if the list is never used.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
