IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
When clogd was renamed to cmirrord, somehow git got the remove of the old
files but not the add of the new files. This patch adds the new files.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
interface it should be using, it can still be overriden with -I.
If corosync isn't running or there is no information then the usual
checking will happen.
This code only builds if corosync is available.
This check-in includes the touch-ups, make file changes, copyrights,
and other necessities to include the cluster log daemon into the
build system.
[autoconf still needs to be run to generate the 'configure' and
'Makefile' files.]
Eliminate dependency on outside library, since the same functionality
exists in our tree.
[It is important that the bitops work in the same way, as the bitmaps
must remain backwards compatible. I haven't tested every architecture,
but the x86* archs work. My test involved using the old ext2fsprogs
bitops, memcpy'ing the bits over to the LVM bitset array and ensuring
that only the bits set via the old methods were set.]
The changes to remove LCK_NONBLOCK from the LVM locks broke clvmd because the
code was clearly wrong but working anyway! The constant was being masked rather
than the variable that was supposed to match against it.
A patch to the kernel, adding the 'luid' field to dm_ulog_request,
will allow us to properly identify log instances. We will now
be able to definitively identify which logs are to be removed/
suspended/resumed. This replaces the old faulty behavior of
assuming the logs were the same if they had the same UUID and
incrementing/decrementing a reference count.
made to compensate for the changes in the kernel-side component
that recently went upstream. (Things like: renamed structures,
removal of structure fields, and changes to arguments passed
between userspace and kernel.)
Use lvconvert --repair in dmeventd mirror DSO.
for now.
It replaces bad behaviour in one set of circumstances with bad behaviour
in a different set. We think the behaviour needs to be more configurable.
Current code, when need to ensure that volume is not
active on remote node, it need to try to exclusive
activate volume.
Patch adds simple clvmd command which queries all nodes
for lock for given resource.
The lock type is returned in reply in text.
(But code currently uses CR and EX modes only.)
This means two things:
1) Non-mirrored LVs will be no longer affected by mirror monitoring. (Before,
if you had a LV that went partially missing on a VG where a mirror leg failed,
this LV would be removed automatically by dmeventd... Probably not an
unrecoverable dataloss bug, but still quite unpleasant.)
2) If enough parallel PV space is available at the time of the mirror failure,
the failed devices will be automatically replaced using this spare space. Which
(and whether) free space may be used is still not configurable, but is a
planned feature. Since it is relatively easy to undo the action by converting
the mirror manually, I don't consider this to be a showstopper. In fact, I
think the compromise is much better than what we have now.
Buildsystem support device-mapper only install,
but generic install tagret includes both dm+lvm2.
For distribution which uses separate install_device-mapper,
there is no way how to install lvm2 only
(so after installing lvm2 for packaging purposes
built system must remove installed device-mapper files).
Fix it by allowing lvm2_install target, similarily like
install_cluster for clvmd.
(install = install_device-mapper + install_lvm2)
Run backup of metadata on remote nodes in the
same place like local node - when calling backup().
Introduce backup_locally() which calls only
local backup if needed.
Remote backup is now trigerred by LCK_VG_BACKUP flag
combination (special VG lock).
This lock type will call check_current_backup()
(including backup_locally() call) and updates
metadata on all nodes.
(Patch fixes non-functional remote backup,
current call during VG lock never triggers.)
- Rename unlock_all to destroy_lvhash,
this function is called in cluster shutdown
unlocks everything and clean up allocated info space.
- Tidy lv_hash_lock use
.
Except adding free(lvi) in lv_has destructror
there is no functional change.
(for example when CLVMD_CMD_LOCK_VG for is called during vgscan).
If clvmd calls LV lock, it calls
/* clean the pool for another command */
dm_pool_empty(cmd->mem);
to clean up memory pool after command.
Unfortunately, do_refresh_cache() do not call this
and because during it operation it allocates some memory,
the pool increases.
Also do_refresh_cache should use lvm_lock
(it manipulates with lvm internal data).
The same applies for lvm_backup command.
Signed-off-by: Milan Broz <mbroz@redhat.com>
There is a rudimentary make file in place so people can build by hand
from 'LVM2/daemons/clogd'. It is not hooked into the main build system
yet. I am checking this in to provide people better access to the
source code.
There is still work to be done to make better use of existing code in
the LVM repository. (list.h could be removed in favor of existing list
implementations, for example. Logging might also be removed in favor
of what is already in the tree.)
I will probably defer updating WHATS_NEW_DM until this code is linked
into the main build system (unless otherwise instructed).
Very simple / crude method of removing 'is_static' from initialization.
Why should we require an application tell us whether it is linked
statically or dynamically to libLVM? If the application is linked
statically, but libraries exist and dlopen() calls succeed, why
do we care if it's statically linked?
This allows us to remove one argument from create_toolcontext() and
moves it closer to a generic library init function.
In the arg_*() functions, we just use _the_args() directly.
For now we leave the first parameter to these
arg_*() functions (struct cmd_context *) because
of the number of files involved in removing the
parameter.
Very similar argument to removal of init_debug() and other calls.
create_toolcontext() calls _process_config() which sets
cmd->default_settings.activation, then calls
set_activation(cmd->default_settings.activation). Later, create_toolcontext()
sets cmd->current_settings = cmd->default_settings. So these calls
set_activation(cmd->current_settings.activation) are redundant.
Identical argument to previous patch which removed archive_enable() calls.
We add a new parameter to backup_init() which sets the enable value based
on the cmd->default_settings.backup value. This value was used to set
cmd->current_settings.backup, used in the removed backup_enable() call.
_init_backup() calls archive_init(), which originally set 'enabled' to
a hardcoded '1' value. This seems incorrect based on my read of other
areas of the code so here we add a 'enabled' paramter to archive_init().
We pass in cmd->default_settings.archive, which is obtained from the
config tree. Later in create_toolcontext, cmd->current_settings is
set to cmd->default_settings. The archive_enable() call we remove
here was using cmd->current_settings to set the 'archive' enable
value. The final value of cmd->archive_params->enabled should thus
be equivalent to the original code.
The rationale for removing init_verbose() call is very similar to removing
init_debug() call. create_toolcontext() calls _init_logging() which
makes these calls:
/* Verbose level for tty output */
cmd->default_settings.verbose =
find_config_tree_int(cmd, "log/verbose", DEFAULT_VERBOSE);
init_verbose(cmd->default_settings.verbose + VERBOSE_BASE_LEVEL);
And being that create_toolcontext() copies default_settings into
current_settings at the bottom, the init_verbose() call we are removing:
init_verbose(cmd->current_settings.verbose + VERBOSE_BASE_LEVEL);
is redundant.
We can safely remove because create_toolcontext() calls _init_logging(),
which makes these calls:
/* Debug level for log file output */
cmd->default_settings.debug =
find_config_tree_int(cmd, "log/level", DEFAULT_LOGLEVEL);
init_debug(cmd->default_settings.debug);
Then at the bottom of create_toolcontext() we do this:
cmd->current_settings = cmd->default_settings;
So the call we are removing from init_lvm() functions (clvmd and lvmcmdline):
init_debug(cmd->current_settings.debug);
Just sets the value of debug based on 'cmd->current_settings.debug'.
Since cmd->current_settings is equivalent to cmd->default_settings, and
init_debug() was called with cmd->default_settings, the call we remove is
redundant.
snapshot DSO unregistered itself when snapshot changed state to invalid.
This can cause a race (and several timeouts), when for example another snapshot
is added and in the middle of operation (suspend/resume) the monitoring thread
unregister itself.
Fix it by keeping the snapshot monitored after invalidation - just reset
threshold to not really print any messages to syslog.
failed to link against liblvm2cmd.
Dmeventd DSOs *require* lvm2cmd to be linked in.
For the future:
1) AC_SUBST does not create Makefile variables, only @foo@-style substitutions
2) When using `test', whitespace around `=' is essential:
test a=b is true, as is test a=a
* configure.in (LVM2CMD_LIB): Define if --enable-cmdlib.
* dmeventd/mirror/Makefile.in (CLDFLAGS): Use $(LVM2CMD_LIB) rather
than hard-coding -llvm2cmd.
* dmeventd/snapshot/Makefile.in (CLDFLAGS): Likewise.
which is not used since the switch away from async version saLck
. num_nodes should equal to member_list_entries, i.e.
joined_list_entires is 0 when a node leaves the group.
Thanks to Xinwei Hu for the patch.
It does 2 things.
1. The cpg_deliver_callback make a compare between target_nodeid and our_nodeid.
It turns out openais set target_nodeid to 0 sometimes. for broadcasting ? I change the behavior so that lvm will process_remote also on target_nodeid == 0
2. The joined_list passed to cpg_confchg_callback doesn't include the already exist nodes in the group, which leads to an incomplete node_hash. I simply add all other nodes in member_list to node_hash also.
Thanks to Xinwei Hu for this patch.
* dmeventd/dmeventd.c (_set_oom_adj): When writing to /proc/self/oom_adj,
detect failure even if it's hidden behind ferror. [Using dm_fclose's
extra ferror test here is probably not needed, since the amount written
is nowhere near BUFSIZ, but use it regardless, for consistency. ]
* lib/fs/libdevmapper.c (do_suspend): Detect fclose failure when
writing to suspend.
Add --config for overriding most config file settings from cmdline.
Quote arguments when printing command line.
Remove linefeed from 'initialising logging' message.
Add 'Completed' debug message.
Don't attempt library exit after reloading config files.
Always compile with libdevmapper, even if device-mapper is disabled.
Fix some memory leaks in error paths found by coverity.
Use C99 struct initialisers.
Move DEFS into configure.h.
Clean-ups to remove miscellaneous compiler warnings.
The daemon side of this is mostly the same as the patch I sent out. To select
a timeout period different than the default and to get the timeout period,
I added two library calls, dm_set_event_timeout() and dm_get_event_timeout().
If people are against them, the other option is to tack extra arguments onto
dm_regiser_for_event() and dm_get_registered_device(). I also added a
-t option to dmevent, so people can try out timeouts.
log types. This means the threaded_syslog type is no longer valid. A new
fxn multilog_async is available to toggle between the two modes. If an
app is compiled without pthreads and tries to use async logging, no logging
will occur while async is enabled.
dmeventd has been modified to use the new code
I'm not positive I like the way the async_logger code calls the log fxn,
but it works for now. Suggestions for other ways to do it would be helpful
- multilog_add_type, multilog_del_type, multilog_custom, and
multilog_init_verbose all have different arguments.
- Primary change is that caller only passes in config info, and the
lib keeps track of state internally. No more exporting of
'struct log_data'.
- Custom callers now only get the custom data pointer passed into their
log fxn (that is set with multilog_custom)
- Added basic README that describes libmultilog
# dmevent -l
Also, changed the behaviour of dm_get_registered_device(), so that it doesn't
change the pointer you passed in without freeing the memory on a non-next call,
and doesn't free your pointer without setting it to NULL on a failed next call.
multilog_add_type()/multilog_del_type cycles correctly.
o fixed segfault in multilog_add_type()
o fixed test-multilog.c
o cleaned up libmultilog (list macros, indentation, braces, comments)
- add event_nr to thread_status struct and set appropriately so that the
thread actually waits for an event
- essentially make error_detected return true. Let the DSOs determine
how to interpret the status info
o more tweaks to libmultilog calls - the api isn't set in stone yet, so
don't get too comfortable.
o not sure the dmeventd in device-mapper/dmeventd works - i've been using
the one in lib/event/
o currently both daemons are set to log only to syslog
o changed
int dm_get_next_registered_device(char **dso_name, char **device,
enum event_type *events);
to
int dm_get_registered_device(char **dso_name, char **device,
enum event_type *events, int next)
so that the daemon is able to retrive the next one of the list without
running into locking issues.
o changed dmevent.c to use dm_get_registered_device()
o couldn't test this yet because of the comms issues
(daemon exits in do_process_request())
Improve reporting of node-specific locking errors so you'll get
somthing a little more helpfiul than "host is down" - it will now tell
you /which/ host it thinks is down.
./configure --with-clvmd
wil do this by default. Or you can choose which you want with
./configure --with-clvmd=gulm or
./configure --with-clvmd=cman
When clvmd with both included is run, it will automatically detect the cluster
manager in use.
