IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
When using lvmetad, 'pvs' still evaluates full filters
on all devices (lvmetad only provides info about PVs,
but pvs needs to report info about all devices, at
least sometimes.)
Because some filters read the devices, pvs still reads
every device, even with lvmetad (i.e. lvmetad is no help
for the pvs command.) Because the device reads are not
being managed by the standard label scan layer, but only
happen incidentally through the filters, there is nothing
to control and limit the bcache content and the open file
descriptors for the devices. When there are a lot of devs
on the system, the number of open fd's excedes the limit
and all opens begin failing.
The proper solution for this would be for pvs to really
use lvmetad and not scan devs, or for pvs to do a proper
label scan even when lvmetad is enabled. To avoid any
major changes to the way this has worked, just work around
this problem by dropping bcache and closing the fd after
pvs evaluates the filter on each device.
When vgcreate does an automatic pvcreate, it opens the
dev with O_EXCL to ensure no other subsystem is using
the device. This exclusive fd remained in bcache and
prevented activation parts of lvm from using the dev.
This appeared with vgcreate of a sanlock VG because of
the unique combination where the dev is not yet a PV,
so pvcreate is needed, and the vgcreate also creates
and activates an internal LV for sanlock.
Fix this by closing the exclusive fd after it's used
by pvcreate so that it won't interfere with other
bits of lvm that may try to use the device.
Prohibit, because the tracking can't continue and
further conversions may fail with bogus error messages.
Resolves: rhbz1579072
(cherry picked from commit a004bb07f14baeed158ac9ea571cf5a6882c436f)
Conflicts:
WHATS_NEW
Prohibit conversions of raid1 split trackchanges SubLVs
because they will fail to get merged back into the RaidLV.
Resolves: rhbz1579438
(cherry picked from commit 8b0729af0fd357e66e95834e92913ea2a42d4e93)
Conflicts:
WHATS_NEW
Commit 3f35146 added a check on the value returned by the
_display_info_cols() function:
1024 if (!_switches[COLS_ARG])
1025 _display_info_long(dmt, &info);
1026 else
1027 r = _display_info_cols(dmt, &info);
1028
1029 return r;
This exposes a bug in the dmstats code in _display_info_cols:
the fact that a device has no regions is explicitly not an error
(and is documented as such in the code), but since the return
code is not changed before leaving the function it is now treated
as an error leading to:
# dmstats list
Command failed.
When no regions exist.
Set the return code to the correct value before returning.
(cherry picked from commit 29b9ccd261be025aaf75e58e5d2547e818ef22c3)
Conversions of LVs under snapshot to thinpool or cachepool
correctly fail but leave them inactive and provide cryptic
error messages like 'Internal error: #LVs (10) != #visible
LVs (2) + #snapshots (1) + #internal LVs (5) in VG VG'.
Reject and provide better error message.
Resolves: rhbz1514146
(cherry picked from commit 2214dc12c34890c78b05456f58d0aa5d6dd08f4c)
The 'lvconvert LV' command def has caused multiple problems
for command matching because it matches the required options
of any lvconvert command. Any lvconvert with incorrect options
ends up matching 'lvconvert LV', which then produces an error
about incorrect options being used for 'lvconvert LV'. This
prevents suggestions from nearest-command partial command matches.
Add a special case for 'lvconvert LV' so that it won't be used
as a partial match for a command that has options specified.
Commit a30e6222799:
"scan: work around udev problems by avoiding open RDWR"
had us reopen a device RDWR in the write function. Since
we know earlier that the command intends to write to devices
in the VG, we can reopen the VG's devices RDWR during the
rescan instead of waiting until the writes to happen.
"lvconvert --type {linear|striped|raid*} ..." on a striped/linear
LV provides convenience interim type to convert to the requested
final layout similar to the given raid* <-> raid* conveninece types.
Whilst on it, add missing raid5_n convenince type from raid5* to raid10.
Resolves: rhbz1439925
Resolves: rhbz1447809
Resolves: rhbz1573255
(cherry picked from commit bd7cdd0b09ba123b064937fddde08daacbed7dab)
The previous method for forcibly changing a clustered VG to
a local VG involved using -cn and --config locking_type=0.
Add an alternative that is consistent with other forced
lock type changes:
vgchange --locktype none --lockopt force.
In this command, lvcreate creates a new LV and then combines
it with an existing cache pool, producing a cache LV. This
command was previously not allowed in in a shared VG.
When the lvmlockd lock is shared, upgrade it to ex
when repair (writing) is needed during vg_read.
Pass the lockd state through additional read-related
functions so the instances of repair scattered through
vg_read can be handled.
(Temporary solution until the ad hoc repairs can be
pulled out of vg_read into a top level, centralized
repair function.)
The report uses process_each_vg() which populates lvmcache
based on a VG list from lvmetad. If there are no VGs,
but only orphan PVs, the orphans are not shown. Add an
explicit call to populate lvmcache with PV info from lvmetad.
ATM it's a bit ugly to enforce flushing of 'stdio' here, but works as quick
hot-fix.
log_print*() is using buffered I/O.
But for pooling with typical 1s interval this may take a while before
buffer about continues progress gets flushed.
So ATM fflush().
TODO: either add log_print*_with_flush() or maybe directly use just
line buffering with log_print() and only log_debug() keep using buffered
I/O mode.
with the --labelsector option. We probably don't
need all this code to support any value for this
option; it's unclear how, when, why it would be
used.
Filters are still applied before any device reading or
the label scan, but any filter checks that want to read
the device are skipped and the device is flagged.
After bcache is populated, but before lvm looks for
devices (i.e. before label scan), the filters are
reapplied to the devices that were flagged above.
The filters will then find the data they need in
bcache.
The clvmd saved_vg data is independent from the normal lvm
lvmcache vginfo data, so separate saved_vg from vginfo.
Normal lvm doesn't need to use save_vg at all, and in clvmd,
lvmcache changes on vginfo can be made without worrying
about unwanted effects on saved_vg.
I don't like having this in a common header because it means you end
up including too much and causing unneccessary dependencies. eg,
lib/misc/lib.h includes libdevmapper.h, internationalisation, and
logging stuff.
There are likely more bits of code that can be removed,
e.g. lvm1/pool-specific bits of code that were identified
using FMT flags.
The vgconvert command can likely be reduced further.
The lvm1-specific config settings should probably have
some other fields set for proper deprecation.
Shift refresh of mirror table right into monitor_dev_for_events().
Use !vg_write_lock_held() to recognize use of lvchange/vgchange.
(this shall change if this would no longer work, but requires
futher some API changes).
With this patch dm mirror table is only refreshed when necassary.
Also update WARNING message about mirror usage without monitoring
and display LV name.
When pvmove was run in background mode and forks
instead of using lvmpolld, the child pvmove process
was not clearing the bcache from the parent, so all
the aio ops in the child were failing.
For reporting commands (pvs,vgs,lvs,pvdisplay,vgdisplay,lvdisplay)
we do not need to repeat the label scan of devices in vg_read if
they all had matching metadata in the initial label scan. The
data read by label scan can just be reused for the vg_read.
This cuts the amount of device i/o in half, from two reads of
each device to one. We have to be careful to avoid repairing
the VG if we've skipped rescanning. (The VG repair code is very
poor, and will be redone soon.)
Recent changes allow some major simplification of the way
lvmcache works and is used. lvmcache_label_scan is now
called in a controlled fashion at the start of commands,
and not via various unpredictable side effects. Remove
various calls to it from other places. lvmcache_label_scan
should not be called from anywhere during a command, because
it produces an incorrect representation of PVs with no MDAs,
and misclassifies them as orphans. This has been a long
standing problem. The invalid flag and rescanning based on
that is no longer used and removed. The 'force' variation is
no longer needed and removed.
