IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Fix bug in table reload for clustered VG.
Function used in lv/vgchange --monitor y|n is using 'somewhat' hackish
shortcut and accesses activation function monitor_dev_for_events()
directly rather through full device refresh to avoid table reload
in case user want to only change monitoring state of device.
However since with old 'mirrors' there is table change dropping
handle_error there was in some cases needed table update.
This was put into monitor_dev_for_events() with assumption
vg_write_lock_held() could be used to decide if the actual monitoring
change comes from read-only lock-holding commands lvchange/vgchange.
However the clustered locking part (clvmd) actually doesn't differentiate
about this concept of having VG openned in read-only or write mode.
So it caused unwanted reloads of mirror tables even in commands like lvconvert.
Thus for clustered locking there is full table reload put into the code and
shortcut applies only for non-clustered locking.
Also the patch tries to avoid calling repeated LV refresh in case the
lv/vgchange uses --refresh & --monitor.
When using 'lvcreate -l100%VG' and there is big disproportion between
real available space and requested setting - automatically fallback
to 100%FREE.
Difference can be seen when VG is big and already most space was
allocated, so the requestion 100%VG can end (and by spec for % modifier
it's correct) as LV with size of 1%VG. Usually this is not a big
problem - buit in some cases - like cache-pool allocation, this
can result a big difference for chunksize selection.
With this patch it's more closely match common-sense logic without
the need of reitteration of too big changes in lvm2 core ATM.
TODO: in the future there should be allocator solving all allocations
in a single call.
Trying to convert an exiting RAID1 LV to cache metadata SubLV
fails because of missing exclusive activation during wiping.
Solve by activating the RAID1 metadata SubLV exclusively.
Resolves: rhbz1698866
There's a small window during creation of a new RaidLV when
rmeta SubLVs are made visible to wipe them in order to prevent
erroneous discovery of stale RAID metadata. In case a crash
prevents the SubLVs from being committed hidden after such
wiping, the RaidLV can still be activated with the SubLVs visible.
During deactivation though, a deadlock occurs because the visible
SubLVs are deactivated before the RaidLV.
The patch adds _check_raid_sublvs to the raid validation in merge.c,
an activation check to activate.c (paranoid, because the merge.c check
will prevent activation in case of visible SubLVs) and shares the
existing wiping function _clear_lvs in raid_manip.c moved to lv_manip.c
and renamed to activate_and_wipe_lvlist to remove code duplication.
Whilst on it, introduce activate_and_wipe_lv to share with
(lvconvert|lvchange).c.
Resolves: rhbz1633167
(cherry picked from commit dd5716ddf258c4a44819fa90d3356833ccf767b4)
Conflicts:
WHATS_NEW
lib/activate/activate.c
lib/metadata/lv_manip.c
lib/metadata/raid_manip.c
tools/lvchange.c
tools/lvconvert.c
When pvscan needs to initialize lvmetad (e.g. lvmetad has just
started and is empty), it should set the lvmetad state to "updating"
before it scans any devices. Otherwise, many parallel pvscans
will try to initialize lvmetad, and in some cases earlier pvscans
with fewer devices information may replace newer pvscans with
more recent information.
Use the correct loop variable within the loop, instead of reusing the
initial value. Table lines after the first don't get terminated in
the right place.
Signed-off-by: Kurt Garloff <kurt@garloff.de>
(cherry picked from commit ccfbd505fea2f259f7c89dc23b020b838363a611)
If there are two independent scripts doing:
vgchange --lockstart vg
lvchange -ay vg/lv
The first vgchange to do the lockstart will wait for
the lockstart to complete before returning.
The second vgchange to do the lockstart will see that
the start is already in progress (from the first) and
will do nothing. This means the second does not wait
for any lockstart to complete, and moves on to the
lvchange which may find the lockspace still starting
and fail.
To fix this, make the vgchange lockstart command
wait for any lockstart's in progress to complete.
When no md devs are started, pvscan will only scan the start of
an md component, and if it has a superblock at the end may not
exclude it. udev may already have info identifying it as an
md component, so use that.
lvconvert --repair would disable lvmetad at the start of
the command. This would leave lvmetad disabled even if the
command did nothing. Move the step to disable lvmetad until
later, just before some actual repair is done. There are
now numerous cases where nothing is actually done and lvmetad
is not disabled.
Apply the same logic to pvscan/lvmetad that was added to
the non-lvmetad label_scan in commit 3fd75d1b:
scan: use full md filter when md 1.0 devices are present
Before scanning, check if any of the devs on the system are
md 0.90/1.0, and if so make the scan read both the start and
the end of the device so that the components of those md
versions can be ignored.
Since the stats handle is neither bound nor listed before the
attempt to call dm_stats_get_nr_regions(), it will always return
zero: this prevents reporting of any dmstats regions on any
device.
Remove the dm_stats_get_nr_regions() check and instead rely on
the correct return status from dm_stats_populate() which only
returns 0 in the case that there are regions to inspect (and
which logs a specific error for all other cases).
Reported-by: Bryan Gurney <bgurney@redhat.com>
When using lvmetad, 'pvs' still evaluates full filters
on all devices (lvmetad only provides info about PVs,
but pvs needs to report info about all devices, at
least sometimes.)
Because some filters read the devices, pvs still reads
every device, even with lvmetad (i.e. lvmetad is no help
for the pvs command.) Because the device reads are not
being managed by the standard label scan layer, but only
happen incidentally through the filters, there is nothing
to control and limit the bcache content and the open file
descriptors for the devices. When there are a lot of devs
on the system, the number of open fd's excedes the limit
and all opens begin failing.
The proper solution for this would be for pvs to really
use lvmetad and not scan devs, or for pvs to do a proper
label scan even when lvmetad is enabled. To avoid any
major changes to the way this has worked, just work around
this problem by dropping bcache and closing the fd after
pvs evaluates the filter on each device.
When vgcreate does an automatic pvcreate, it opens the
dev with O_EXCL to ensure no other subsystem is using
the device. This exclusive fd remained in bcache and
prevented activation parts of lvm from using the dev.
This appeared with vgcreate of a sanlock VG because of
the unique combination where the dev is not yet a PV,
so pvcreate is needed, and the vgcreate also creates
and activates an internal LV for sanlock.
Fix this by closing the exclusive fd after it's used
by pvcreate so that it won't interfere with other
bits of lvm that may try to use the device.
Prohibit, because the tracking can't continue and
further conversions may fail with bogus error messages.
Resolves: rhbz1579072
(cherry picked from commit a004bb07f14baeed158ac9ea571cf5a6882c436f)
Conflicts:
WHATS_NEW
Prohibit conversions of raid1 split trackchanges SubLVs
because they will fail to get merged back into the RaidLV.
Resolves: rhbz1579438
(cherry picked from commit 8b0729af0fd357e66e95834e92913ea2a42d4e93)
Conflicts:
WHATS_NEW
Commit 3f35146 added a check on the value returned by the
_display_info_cols() function:
1024 if (!_switches[COLS_ARG])
1025 _display_info_long(dmt, &info);
1026 else
1027 r = _display_info_cols(dmt, &info);
1028
1029 return r;
This exposes a bug in the dmstats code in _display_info_cols:
the fact that a device has no regions is explicitly not an error
(and is documented as such in the code), but since the return
code is not changed before leaving the function it is now treated
as an error leading to:
# dmstats list
Command failed.
When no regions exist.
Set the return code to the correct value before returning.
(cherry picked from commit 29b9ccd261be025aaf75e58e5d2547e818ef22c3)
Conversions of LVs under snapshot to thinpool or cachepool
correctly fail but leave them inactive and provide cryptic
error messages like 'Internal error: #LVs (10) != #visible
LVs (2) + #snapshots (1) + #internal LVs (5) in VG VG'.
Reject and provide better error message.
Resolves: rhbz1514146
(cherry picked from commit 2214dc12c34890c78b05456f58d0aa5d6dd08f4c)
The 'lvconvert LV' command def has caused multiple problems
for command matching because it matches the required options
of any lvconvert command. Any lvconvert with incorrect options
ends up matching 'lvconvert LV', which then produces an error
about incorrect options being used for 'lvconvert LV'. This
prevents suggestions from nearest-command partial command matches.
Add a special case for 'lvconvert LV' so that it won't be used
as a partial match for a command that has options specified.
Commit a30e6222799:
"scan: work around udev problems by avoiding open RDWR"
had us reopen a device RDWR in the write function. Since
we know earlier that the command intends to write to devices
in the VG, we can reopen the VG's devices RDWR during the
rescan instead of waiting until the writes to happen.
"lvconvert --type {linear|striped|raid*} ..." on a striped/linear
LV provides convenience interim type to convert to the requested
final layout similar to the given raid* <-> raid* conveninece types.
Whilst on it, add missing raid5_n convenince type from raid5* to raid10.
Resolves: rhbz1439925
Resolves: rhbz1447809
Resolves: rhbz1573255
(cherry picked from commit bd7cdd0b09ba123b064937fddde08daacbed7dab)
The previous method for forcibly changing a clustered VG to
a local VG involved using -cn and --config locking_type=0.
Add an alternative that is consistent with other forced
lock type changes:
vgchange --locktype none --lockopt force.
In this command, lvcreate creates a new LV and then combines
it with an existing cache pool, producing a cache LV. This
command was previously not allowed in in a shared VG.
When the lvmlockd lock is shared, upgrade it to ex
when repair (writing) is needed during vg_read.
Pass the lockd state through additional read-related
functions so the instances of repair scattered through
vg_read can be handled.
(Temporary solution until the ad hoc repairs can be
pulled out of vg_read into a top level, centralized
repair function.)
The report uses process_each_vg() which populates lvmcache
based on a VG list from lvmetad. If there are no VGs,
but only orphan PVs, the orphans are not shown. Add an
explicit call to populate lvmcache with PV info from lvmetad.
ATM it's a bit ugly to enforce flushing of 'stdio' here, but works as quick
hot-fix.
log_print*() is using buffered I/O.
But for pooling with typical 1s interval this may take a while before
buffer about continues progress gets flushed.
So ATM fflush().
TODO: either add log_print*_with_flush() or maybe directly use just
line buffering with log_print() and only log_debug() keep using buffered
I/O mode.
with the --labelsector option. We probably don't
need all this code to support any value for this
option; it's unclear how, when, why it would be
used.
Filters are still applied before any device reading or
the label scan, but any filter checks that want to read
the device are skipped and the device is flagged.
After bcache is populated, but before lvm looks for
devices (i.e. before label scan), the filters are
reapplied to the devices that were flagged above.
The filters will then find the data they need in
bcache.
The clvmd saved_vg data is independent from the normal lvm
lvmcache vginfo data, so separate saved_vg from vginfo.
Normal lvm doesn't need to use save_vg at all, and in clvmd,
lvmcache changes on vginfo can be made without worrying
about unwanted effects on saved_vg.
I don't like having this in a common header because it means you end
up including too much and causing unneccessary dependencies. eg,
lib/misc/lib.h includes libdevmapper.h, internationalisation, and
logging stuff.
There are likely more bits of code that can be removed,
e.g. lvm1/pool-specific bits of code that were identified
using FMT flags.
The vgconvert command can likely be reduced further.
The lvm1-specific config settings should probably have
some other fields set for proper deprecation.
