/*
 * Copyright (C) 2005-2016 Red Hat, Inc. All rights reserved.
 *
 * This file is part of LVM2.
 *
 * This copyrighted material is made available to anyone wishing to use,
 * modify, copy, or redistribute it subject to the terms and conditions
 * of the GNU Lesser General Public License v.2.1.
 *
 * You should have received a copy of the GNU Lesser General Public License
 * along with this program; if not, write to the Free Software Foundation,
 * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
 */

#include "tools.h"

#include "polldaemon.h"
#include "lv_alloc.h"
#include "lvconvert_poll.h"

/*
 * Guidelines for mapping options to operations.
 *
 * There should be a clear and unique correspondence between an option
 * name and the operation to be performed.
 *
 * An option with a given name should always perform the same operation.
 * If the same operation applies to two types of LV, then the same option
 * name can be used with both LV types.  But, a given option name should
 * not be used to perform different operations depending on the LV type it
 * is used with.
 *
 * --merge and --split are examples where a single option name has been
 * overloaded with different operations.  The case of --split has been
 * corrected with the clear and unique variations --splitcache,
 * --splitsnapshot, --splitmirror, which should allow --split to be
 * deprecated.  (The same is still needed for --merge.)
 */

typedef enum {
	/* Merge:
	 *   If merge_snapshot is also set:
	 *     merge thin snapshot LV into its origin
	 *     merge old snapshot COW into its origin
	 *   or if merge_mirror is also set
	 *     merge LV previously split from mirror back into mirror
	 */
	CONV_MERGE = 1,

	/* Split:
	 *   For a snapshot, split it apart into COW and origin for future recombination
	 *   For a cached LV, split it apart into the cached LV and its pool
	 *   For a mirrored or raid LV, split mirror into two mirrors, optionally tracking
	 *     future changes to the main mirror to allow future recombination.
	 */
	CONV_SPLIT = 2,
	CONV_SPLIT_SNAPSHOT = 3,
	CONV_SPLIT_CACHE = 4,
	CONV_SPLIT_MIRRORS = 5,

	/* Start to cache an LV */
	CONV_CACHE = 6,

	/* Destroy the cache attached to a cached LV */
	CONV_UNCACHE = 7,

	/* Reconstruct a snapshot from its origin and COW */
	CONV_SNAPSHOT = 8,

	/* Replace devices in a raid LV with alternatives */
	CONV_REPLACE = 9,

	/* Repair a mirror, raid or thin LV */
	CONV_REPAIR = 10,

	/* Convert normal LV into one in a thin pool */
	CONV_THIN = 11,

	/* Every other segment type or mirror log conversion we haven't separated out */
	CONV_OTHER = 12,
} conversion_type_t;

struct lvconvert_params {
	/* Exactly one of these 12 command categories is determined */
	int merge;		/* 1 */
	int split;		/* 2 */
	int splitsnapshot;	/* 3 */
	int splitcache;		/* 4 */
	int keep_mimages;	/* 5 */	/* --splitmirrors */
	int cache;		/* 6 */
	int uncache;		/* 7 */
	int snapshot;		/* 8 */
	int replace;		/* 9 */
	int repair;		/* 10 */
	int thin;		/* 11 */
	/* other */		/* 12 */

	/* FIXME Eliminate all cases where more than one of the above are set then use conv_type instead */
	conversion_type_t	conv_type;

	int merge_snapshot;	/* CONV_MERGE is set */
	int merge_mirror;	/* CONV_MERGE is set */

	int track_changes;	/* CONV_SPLIT_MIRRORS is set */

	int corelog;		/* Equivalent to --mirrorlog core */
	int mirrorlog;		/* Only one of corelog and mirrorlog may be set */

	int mirrors_supplied;	/* When type_str is not set, this may be set with keep_mimages for --splitmirrors */
	const char *type_str;	/* When this is set, mirrors_supplied may optionally also be set */
				/* Holds what you asked for based on --type or other arguments, else "" */

	const struct segment_type *segtype;	/* Holds what segment type you will get */

	int poolmetadataspare;
	int force;
	int yes;
	int zero;

	const char *lv_name;
	const char *lv_split_name;
	const char *lv_name_full;
	const char *vg_name;
	int wait_completion;
	int need_polling;

	int thin_chunk_size_calc_policy;
	uint32_t chunk_size;
	uint32_t region_size;

	uint32_t mirrors;
	sign_t mirrors_sign;
	uint32_t stripes;
	uint32_t stripe_size;
	unsigned stripes_supplied;
	unsigned stripe_size_supplied;
	uint32_t read_ahead;
	cache_mode_t cache_mode; /* cache */
	const char *policy_name; /* cache */
	struct dm_config_tree *policy_settings; /* cache */

	unsigned target_attr;

	alloc_policy_t alloc;

	int pv_count;
	char **pvs;
	struct dm_list *pvh;

	int replace_pv_count;
	char **replace_pvs;
	struct dm_list *replace_pvh;

	struct logical_volume *lv_to_poll;
	struct dm_list idls;

	uint32_t pool_metadata_extents;
	int passed_args;
	uint64_t pool_metadata_size;
	const char *origin_name;
	const char *pool_data_name;
	struct logical_volume *pool_data_lv;
	const char *pool_metadata_name;
	struct logical_volume *pool_metadata_lv;
	thin_discards_t discards;
};

struct convert_poll_id_list {
	struct dm_list list;
	struct poll_operation_id *id;
	unsigned is_merging_origin:1;
	unsigned is_merging_origin_thin:1;
};

/* FIXME Temporary function until the enum replaces the separate variables */
static void _set_conv_type(struct lvconvert_params *lp, int conv_type)
{
	if (lp->conv_type != CONV_OTHER)
		log_error(INTERNAL_ERROR "Changing conv_type from %d to %d.", lp->conv_type, conv_type);

	lp->conv_type = conv_type;
}

static int _lvconvert_validate_names(struct lvconvert_params *lp)
{
	unsigned i, j;
	const char *names[] = {
		(lp->lv_name == lp->pool_data_name) ? NULL : lp->lv_name, "converted",
		lp->pool_data_name, "pool",
		lp->pool_metadata_name, "pool metadata",
		lp->origin_name, "origin",
	};

	for (i = 0; i < DM_ARRAY_SIZE(names); i += 2)
		if (names[i])
			for (j = i + 2; j < DM_ARRAY_SIZE(names); j += 2)
				if (names[j] && !strcmp(names[i], names[j])) {
					log_error("Can't use same name %s for %s and %s volume.",
						  names[i], names[i + 1], names[j + 1]);
					return 0;
				}

	return 1;
}

static int _lvconvert_name_params(struct lvconvert_params *lp,
				  struct cmd_context *cmd,
				  int *pargc, char ***pargv)
{
	if (lp->merge) {
		/* FIXME Multiple arguments that mix snap and mirror? */
		if (!*pargc) {
			log_error("Please specify a logical volume path.");
			return 0;
		}

		if (!strstr((*pargv)[0], "_rimage_")) {	/* Snapshot */
			lp->type_str = SEG_TYPE_NAME_SNAPSHOT;
			lp->merge_snapshot = 1;

			return 1;
		}

		/* Mirror */
		lp->merge_mirror = 1;
	}

	if (!*pargc) {
		if (lp->cache) {
			log_error("Logical volume name for caching is missing.");
			return 0;
		}
		if (lp->thin) {
			log_error("Please specify a logical volume to act as "
				  "the external origin.");
			return 0;
		}
		if (lp->snapshot) {
			log_error("Please specify a logical volume to act as "
				  "the snapshot exception store.");
			return 0;
		}
		if (lp->split) {
			log_error("Logical volume for split is missing.");
			return 0;
		}
		if (lp->splitcache) {
			log_error("Cache logical volume for split is missing.");
			return 0;
		}
		if (lp->uncache) {
			log_error("Cache logical volume for uncache is missing.");
			return 0;
		}
		if (!lp->lv_name_full) {
			log_error("Please provide logical volume path.");
			return 0;
		}
	} else if (!lp->lv_name_full) {
		lp->lv_name_full = (*pargv)[0];
		(*pargv)++, (*pargc)--;
	}

	if (!validate_restricted_lvname_param(cmd, &lp->vg_name, &lp->pool_metadata_name))
		return_0;

	if (!validate_restricted_lvname_param(cmd, &lp->vg_name, &lp->pool_data_name))
		return_0;

	if (!validate_restricted_lvname_param(cmd, &lp->vg_name, &lp->origin_name))
		return_0;

	if (!validate_restricted_lvname_param(cmd, &lp->vg_name, &lp->lv_split_name))
		return_0;

	if (!lp->vg_name && !strchr(lp->lv_name_full, '/')) {
		/* Check for $LVM_VG_NAME */
		if (!(lp->vg_name = extract_vgname(cmd, NULL))) {
			log_error("Please specify a logical volume path.");
			return 0;
		}
	}

	if (!validate_lvname_param(cmd, &lp->vg_name, &lp->lv_name_full))
		return_0;

	lp->lv_name = lp->lv_name_full;

	if (!validate_name(lp->vg_name)) {
		log_error("Please provide a valid volume group name");
		return 0;
	}

	/*
	 * FIXME: avoid this distinct validation out of scope of _convert_*()
	 *
 	 *        We should not rely on namespace here any more!
 	 *        It is the duty of lvcreate/lvrename to avoid reserved names.
 	 */
	if (!lp->merge_mirror &&
	    !lp->repair &&
	    !lp->keep_mimages &&
	    !strstr(lp->lv_name, "_tdata") &&
	    !strstr(lp->lv_name, "_tmeta") &&
	    !strstr(lp->lv_name, "_cdata") &&
	    !strstr(lp->lv_name, "_cmeta") &&
	    !strstr(lp->lv_name, "_corig") &&
	    !apply_lvname_restrictions(lp->lv_name))
		return_0;

	if (*pargc) {
		if (lp->snapshot) {
			log_error("Too many arguments provided for snapshots.");
			return 0;
		}
		if (lp->splitsnapshot) {
			log_error("Too many arguments provided with --splitsnapshot.");
			return 0;
		}
		if (lp->splitcache) {
			log_error("Too many arguments provided with --splitcache.");
			return 0;
		}
		if (lp->split) {
			log_error("Too many arguments provided with --split.");
			return 0;
		}
		if (lp->uncache) {
			log_error("Too many arguments provided with --uncache.");
			return 0;
		}
		if (lp->pool_data_name && lp->pool_metadata_name) {
			log_error("Too many arguments provided for pool.");
			return 0;
		}
	}

	if (!_lvconvert_validate_names(lp))
		return_0;

	return 1;
}

/* -s/--snapshot and --type snapshot are synonyms */
static int _snapshot_type_requested(struct cmd_context *cmd, const char *type_str)
{
	return (arg_is_set(cmd, snapshot_ARG) || !strcmp(type_str, SEG_TYPE_NAME_SNAPSHOT));
}

static int _raid0_type_requested(const char *type_str)
{
	return (!strcmp(type_str, SEG_TYPE_NAME_RAID0) || !strcmp(type_str, SEG_TYPE_NAME_RAID0_META));
}

/* mirror/raid* (1,10,4,5,6 and their variants) reshape */
static int _mirror_or_raid_type_requested(struct cmd_context *cmd, const char *type_str)
{
	return (arg_is_set(cmd, mirrors_ARG) || !strcmp(type_str, SEG_TYPE_NAME_MIRROR) ||
		(!strncmp(type_str, SEG_TYPE_NAME_RAID, 4) && !_raid0_type_requested(type_str)));
}

static int _linear_type_requested(const char *type_str)
{
	return (!strcmp(type_str, SEG_TYPE_NAME_LINEAR));
}

static int _striped_type_requested(const char *type_str)
{
	return (!strcmp(type_str, SEG_TYPE_NAME_STRIPED) || _linear_type_requested(type_str));
}

static int _read_conversion_type(struct cmd_context *cmd,
				 struct lvconvert_params *lp)
{

	const char *type_str = arg_str_value(cmd, type_ARG, "");

	lp->type_str =  type_str;
	if (!lp->type_str[0])
		return 1;

	/* FIXME: Check thin-pool and thin more thoroughly! */
	if (!strcmp(type_str, SEG_TYPE_NAME_SNAPSHOT) || _striped_type_requested(type_str) ||
	    !strncmp(type_str, SEG_TYPE_NAME_RAID, 4) || !strcmp(type_str, SEG_TYPE_NAME_MIRROR) ||
	    !strcmp(type_str, SEG_TYPE_NAME_CACHE_POOL) || !strcmp(type_str, SEG_TYPE_NAME_CACHE) ||
	    !strcmp(type_str, SEG_TYPE_NAME_THIN_POOL) || !strcmp(type_str, SEG_TYPE_NAME_THIN))
		return 1;

	log_error("Conversion using --type %s is not supported.", type_str);

	return 0;
}

static int _read_pool_params(struct cmd_context *cmd, int *pargc, char ***pargv,
			     struct lvconvert_params *lp)
{
	int cachepool = 0;
	int thinpool = 0;
	struct segment_type *segtype;

	if ((lp->pool_data_name = arg_str_value(cmd, cachepool_ARG, NULL))) {
		if (lp->type_str[0] &&
		    strcmp(lp->type_str, SEG_TYPE_NAME_CACHE) &&
		    strcmp(lp->type_str, SEG_TYPE_NAME_CACHE_POOL)) {
			log_error("--cachepool argument is only valid with "
				  "the cache or cache-pool segment type.");
			return 0;
		}
		cachepool = 1;
		lp->type_str = SEG_TYPE_NAME_CACHE_POOL;
	} else if (!strcmp(lp->type_str, SEG_TYPE_NAME_CACHE_POOL))
		cachepool = 1;
	else if ((lp->pool_data_name = arg_str_value(cmd, thinpool_ARG, NULL))) {
		if (lp->type_str[0] &&
		    strcmp(lp->type_str, SEG_TYPE_NAME_THIN) &&
		    strcmp(lp->type_str, SEG_TYPE_NAME_THIN_POOL)) {
			log_error("--thinpool argument is only valid with "
				  "the thin or thin-pool segment type.");
			return 0;
		}
		thinpool = 1;
		lp->type_str = SEG_TYPE_NAME_THIN_POOL;
	} else if (!strcmp(lp->type_str, SEG_TYPE_NAME_THIN_POOL))
		thinpool = 1;

	if (lp->cache && !cachepool) {
		log_error("--cache requires --cachepool.");
		return 0;
	}

	if ((lp->cache || cachepool) &&
	    !get_cache_params(cmd, &lp->cache_mode, &lp->policy_name, &lp->policy_settings)) {
		log_error("Failed to parse cache policy and/or settings.");
		return 0;
	}

	if (thinpool) {
		lp->discards = (thin_discards_t) arg_uint_value(cmd, discards_ARG, THIN_DISCARDS_PASSDOWN);
		lp->origin_name = arg_str_value(cmd, originname_ARG, NULL);
	} else {
		if (arg_from_list_is_set(cmd, "is valid only with thin pools",
					 discards_ARG, originname_ARG, thinpool_ARG,
					 -1))
			return_0;
		if (lp->thin) {
			log_error("--thin requires --thinpool.");
			return 0;
		}
	}

	if (thinpool || cachepool) {
		if (arg_from_list_is_set(cmd, "is invalid with pools",
					 merge_ARG, mirrors_ARG, repair_ARG, snapshot_ARG,
					 splitmirrors_ARG, splitsnapshot_ARG, -1))
			return_0;

		if (!(segtype = get_segtype_from_string(cmd, lp->type_str)))
			return_0;

		if (!get_pool_params(cmd, segtype, &lp->passed_args,
				     &lp->pool_metadata_size,
				     &lp->poolmetadataspare,
				     &lp->chunk_size, &lp->discards,
				     &lp->zero))
			return_0;

		if ((lp->pool_metadata_name = arg_str_value(cmd, poolmetadata_ARG, NULL)) &&
		    arg_from_list_is_set(cmd, "is invalid with --poolmetadata",
					 stripesize_ARG, stripes_long_ARG,
					 readahead_ARG, -1))
			return_0;

		if (!lp->pool_data_name) {
			if (!*pargc) {
				log_error("Please specify the pool data LV.");
				return 0;
			}
			lp->pool_data_name = (*pargv)[0];
			(*pargv)++, (*pargc)--;
		}

		if (!lp->thin && !lp->cache)
			lp->lv_name_full = lp->pool_data_name;

		/* Hmm _read_activation_params */
		lp->read_ahead = arg_uint_value(cmd, readahead_ARG,
						cmd->default_settings.read_ahead);

	} else if (arg_from_list_is_set(cmd, "is valid only with pools",
					poolmetadatasize_ARG, poolmetadataspare_ARG,
					zero_ARG,
					-1))
		return_0;

	return 1;
}

static int _read_params(struct cmd_context *cmd, int argc, char **argv,
			struct lvconvert_params *lp)
{
	int i;
	const char *tmp_str;
	struct arg_value_group_list *group;
	int region_size;
	int pagesize = lvm_getpagesize();

	if (!_read_conversion_type(cmd, lp))
		return_0;

	if (!arg_is_set(cmd, background_ARG))
		lp->wait_completion = 1;

	if (arg_is_set(cmd, corelog_ARG))
		lp->corelog = 1;

	if (arg_is_set(cmd, mirrorlog_ARG)) {
		if (lp->corelog) {
			log_error("--mirrorlog and --corelog are incompatible.");
			return 0;
		}
		lp->mirrorlog = 1;
	}

	if (arg_is_set(cmd, merge_ARG)) {
		if (arg_outside_list_is_set(cmd, "cannot be used with --merge",
					    merge_ARG,
					    background_ARG, interval_ARG,
					    force_ARG, noudevsync_ARG, test_ARG,
					    -1))
			return_0;
		lp->merge = 1;
		_set_conv_type(lp, CONV_MERGE);
	} else if (arg_is_set(cmd, repair_ARG)) {
		if (arg_outside_list_is_set(cmd, "cannot be used with --repair",
					    repair_ARG,
					    alloc_ARG, usepolicies_ARG,
					    background_ARG, interval_ARG,
					    force_ARG, noudevsync_ARG, test_ARG,
					    -1))
			return_0;
		lp->repair = 1;
		_set_conv_type(lp, CONV_REPAIR);
	} else if (arg_is_set(cmd, split_ARG)) {
		if (arg_outside_list_is_set(cmd, "cannot be used with --split",
					    split_ARG,
					    name_ARG,
					    force_ARG, noudevsync_ARG, test_ARG,
					    -1))
			return_0;
		lp->split = 1;
		_set_conv_type(lp, CONV_SPLIT);
	} else if (arg_is_set(cmd, splitcache_ARG)) {
		if (arg_outside_list_is_set(cmd, "cannot be used with --splitcache",
					    splitcache_ARG,
					    force_ARG, noudevsync_ARG, test_ARG,
					    -1))
			return_0;
		lp->splitcache = 1;
		_set_conv_type(lp, CONV_SPLIT_CACHE);
	} else if (arg_is_set(cmd, splitsnapshot_ARG)) {
		if (arg_outside_list_is_set(cmd, "cannot be used with --splitsnapshot",
					    splitsnapshot_ARG,
					    force_ARG, noudevsync_ARG, test_ARG,
					    -1))
			return_0;
		lp->splitsnapshot = 1;
		_set_conv_type(lp, CONV_SPLIT_SNAPSHOT);
	} else if (arg_is_set(cmd, uncache_ARG)) {
		if (arg_outside_list_is_set(cmd, "cannot be used with --uncache",
					    uncache_ARG,
					    force_ARG, noudevsync_ARG, test_ARG,
					    -1))
			return_0;
		lp->uncache = 1;
		_set_conv_type(lp, CONV_UNCACHE);
	} else if (arg_is_set(cmd, replace_ARG)) {
		lp->replace = 1;
		_set_conv_type(lp, CONV_REPLACE);
	}

	if (arg_is_set(cmd, cache_ARG)) {
		lp->cache = 1;
		_set_conv_type(lp, CONV_CACHE);
	}

	if (!strcmp(lp->type_str, SEG_TYPE_NAME_CACHE))
		lp->cache = 1;
	else if (lp->cache) {
		if (lp->type_str[0]) {
			log_error("--cache is incompatible with --type %s", lp->type_str);
			return 0;
		}
		lp->type_str = SEG_TYPE_NAME_CACHE;
	}

	if (arg_is_set(cmd, thin_ARG)) {
		lp->thin = 1;
		_set_conv_type(lp, CONV_THIN);
	}

	if (!strcmp(lp->type_str, SEG_TYPE_NAME_THIN))
		lp->thin = 1;
	else if (lp->thin) {
		if (lp->type_str[0]) {
			log_error("--thin is incompatible with --type %s", lp->type_str);
			return 0;
		}
		lp->type_str = SEG_TYPE_NAME_THIN;
	}

	if (arg_is_set(cmd, trackchanges_ARG))
		lp->track_changes = 1;

	if (!_read_pool_params(cmd, &argc, &argv, lp))
		return_0;

	if (_snapshot_type_requested(cmd, lp->type_str)) {
		if (lp->merge) {
			log_error("--snapshot and --merge are mutually exclusive.");
			return 0;
		}
		lp->snapshot = 1;
		_set_conv_type(lp, CONV_SNAPSHOT);
	}

	if (lp->split) {
		lp->lv_split_name = arg_str_value(cmd, name_ARG, NULL);

	/*
	 * The '--splitmirrors n' argument is equivalent to '--mirrors -n'
	 * (note the minus sign), except that it signifies the additional
	 * intent to keep the mimage that is detached, rather than
	 * discarding it.
	 */
	} else if (arg_is_set(cmd, splitmirrors_ARG)) {
		if (_mirror_or_raid_type_requested(cmd, lp->type_str)) {
			log_error("--mirrors/--type mirror/--type raid* and --splitmirrors are "
				  "mutually exclusive.");
			return 0;
		}

		if (!arg_is_set(cmd, name_ARG) && !lp->track_changes) {
			log_error("Please name the new logical volume using '--name'");
			return 0;
		}

		lp->lv_split_name = arg_str_value(cmd, name_ARG, NULL);
		lp->keep_mimages = 1;
		_set_conv_type(lp, CONV_SPLIT_MIRRORS);
		lp->mirrors = arg_uint_value(cmd, splitmirrors_ARG, 0);
		lp->mirrors_sign = SIGN_MINUS;
	} else {
		if (lp->track_changes) {
			log_error("--trackchanges is only valid with --splitmirrors.");
			return 0;
		}
		if (arg_is_set(cmd, name_ARG)) {
			log_error("The 'name' argument is only valid with --splitmirrors");
			return 0;
		}
	}

	/* If no other case was identified, then use of --stripes means --type striped */
	if (!arg_is_set(cmd, type_ARG) && !*lp->type_str && !lp->merge && !lp->splitsnapshot &&
	    !lp->splitcache && !lp->split && !lp->snapshot && !lp->uncache && !lp->cache && !lp->thin &&
	    !lp->replace && !lp->repair && !lp->mirrorlog && !lp->corelog &&
	    (arg_is_set(cmd, stripes_long_ARG) || arg_is_set(cmd, stripesize_ARG)))
		lp->type_str = SEG_TYPE_NAME_STRIPED;

	if ((_snapshot_type_requested(cmd, lp->type_str) || lp->merge) &&
	    (lp->mirrorlog || _mirror_or_raid_type_requested(cmd, lp->type_str) ||
	     lp->repair || arg_is_set(cmd, thinpool_ARG) || _raid0_type_requested(lp->type_str) ||
	     _striped_type_requested(lp->type_str))) {
		log_error("--snapshot/--type snapshot or --merge argument "
			  "cannot be mixed with --mirrors/--type mirror/--type raid*/--stripes/--type striped/--type linear, "
			  "--mirrorlog, --repair or --thinpool.");
		return 0;
	}

	if ((arg_is_set(cmd, stripes_long_ARG) || arg_is_set(cmd, stripesize_ARG)) &&
	    !(_mirror_or_raid_type_requested(cmd, lp->type_str) || _striped_type_requested(lp->type_str) ||
	      _raid0_type_requested(lp->type_str) || lp->repair || arg_is_set(cmd, thinpool_ARG))) {
		log_error("--stripes or --stripesize argument is only valid "
			  "with --mirrors/--type mirror/--type raid*/--type striped/--type linear, --repair and --thinpool");
		return 0;
	}

	if (arg_is_set(cmd, mirrors_ARG)) {
		/* --splitmirrors is the mechanism for detaching and keeping a mimage */
		lp->mirrors_supplied = 1;
		lp->mirrors = arg_uint_value(cmd, mirrors_ARG, 0);
		lp->mirrors_sign = arg_sign_value(cmd, mirrors_ARG, SIGN_NONE);
	}

	lp->alloc = (alloc_policy_t) arg_uint_value(cmd, alloc_ARG, ALLOC_INHERIT);

	/* We should have caught all these cases already. */
	if (lp->merge + lp->splitsnapshot + lp->splitcache + lp->split + lp->uncache +
	    lp->cache + lp->thin + lp->keep_mimages + lp->snapshot + lp->replace + lp->repair > 1) {
		log_error(INTERNAL_ERROR "Unexpected combination of incompatible options selected.");
		return 0;
	}


	/*
	 * Final checking of each case:
	 *   lp->merge
	 *   lp->splitsnapshot
	 *   lp->splitcache
	 *   lp->split
	 *   lp->uncache
	 *   lp->cache
	 *   lp->thin
	 *   lp->keep_mimages
	 *   lp->snapshot
	 *   lp->replace
	 *   lp->repair
	 *   --type mirror|raid  lp->mirrorlog lp->corelog
	 *   --type raid0|striped
	 */
	switch(lp->conv_type) {
	case CONV_MERGE:	/* Snapshot or mirror merge */
	case CONV_SPLIT:
	case CONV_SPLIT_CACHE:
	case CONV_SPLIT_MIRRORS:
	case CONV_SPLIT_SNAPSHOT:	/* Destroy snapshot retaining cow as separate LV */
	case CONV_CACHE:
	case CONV_UNCACHE:
	case CONV_THIN:
	case CONV_REPAIR:
                break;
	case CONV_SNAPSHOT:	/* Snapshot creation from pre-existing cow */
		if (!argc) {
			log_error("Please provide logical volume path for snapshot origin.");
			return 0;
		}
		lp->origin_name = argv[0];
		argv++, argc--;

		if (arg_is_set(cmd, regionsize_ARG)) {
			log_error("--regionsize is only available with mirrors");
			return 0;
		}

		if (arg_is_set(cmd, stripesize_ARG) || arg_is_set(cmd, stripes_long_ARG)) {
			log_error("--stripes and --stripesize are only available with striped mirrors");
			return 0;
		}

		if (arg_is_set(cmd, chunksize_ARG) &&
		    (arg_sign_value(cmd, chunksize_ARG, SIGN_NONE) == SIGN_MINUS)) {
			log_error("Negative chunk size is invalid.");
			return 0;
		}

		lp->chunk_size = arg_uint_value(cmd, chunksize_ARG, 8);
		if (lp->chunk_size < 8 || lp->chunk_size > 1024 ||
		    !is_power_of_2(lp->chunk_size)) {
			log_error("Chunk size must be a power of 2 in the "
				  "range 4K to 512K");
			return 0;
		}
		log_verbose("Setting chunk size to %s.", display_size(cmd, lp->chunk_size));

		lp->type_str = SEG_TYPE_NAME_SNAPSHOT;
		break;

	case CONV_REPLACE:	/* RAID device replacement */
		lp->replace_pv_count = arg_count(cmd, replace_ARG);
		lp->replace_pvs = dm_pool_alloc(cmd->mem, sizeof(char *) * lp->replace_pv_count);
		if (!lp->replace_pvs)
			return_0;

		i = 0;
		dm_list_iterate_items(group, &cmd->arg_value_groups) {
			if (!grouped_arg_is_set(group->arg_values, replace_ARG))
				continue;
			if (!(tmp_str = grouped_arg_str_value(group->arg_values,
							      replace_ARG,
							      NULL))) {
				log_error("Failed to get '--replace' argument");
				return 0;
			}
			if (!(lp->replace_pvs[i++] = dm_pool_strdup(cmd->mem,
								    tmp_str)))
				return_0;
		}
		break;

	case CONV_OTHER:
		if (_mirror_or_raid_type_requested(cmd, lp->type_str) ||
			   lp->mirrorlog || lp->corelog) { /* Mirrors (and some RAID functions) */
			if (arg_is_set(cmd, chunksize_ARG)) {
				log_error("--chunksize is only available with snapshots or pools.");
				return 0;
			}

			if (arg_is_set(cmd, zero_ARG)) {
				log_error("--zero is only available with snapshots or thin pools.");
				return 0;
			}

			/*
			 * --regionsize is only valid if converting an LV into a mirror.
			 * Checked when we know the state of the LV being converted.
			 */
			if (arg_is_set(cmd, regionsize_ARG)) {
				if (arg_sign_value(cmd, regionsize_ARG, SIGN_NONE) ==
					    SIGN_MINUS) {
					log_error("Negative regionsize is invalid.");
					return 0;
				}
				lp->region_size = arg_uint_value(cmd, regionsize_ARG, 0);
			} else {
				region_size = get_default_region_size(cmd);
				if (region_size < 0) {
					log_error("Negative regionsize in "
						  "configuration file is invalid.");
					return 0;
				}
				lp->region_size = region_size;
			}

			if (lp->region_size % (pagesize >> SECTOR_SHIFT)) {
				log_error("Region size (%" PRIu32 ") must be "
					  "a multiple of machine memory "
					  "page size (%d).",
					  lp->region_size, pagesize >> SECTOR_SHIFT);
				return 0;
			}

			if (!is_power_of_2(lp->region_size)) {
				log_error("Region size (%" PRIu32
					  ") must be a power of 2.", lp->region_size);
				return 0;
			}

			if (!lp->region_size) {
				log_error("Non-zero region size must be supplied.");
				return 0;
			}

			/* FIXME man page says in one place that --type and --mirrors can't be mixed */
			if (lp->mirrors_supplied && !lp->mirrors)
				/* down-converting to linear/stripe? */
				lp->type_str = SEG_TYPE_NAME_STRIPED;

		} else if (_raid0_type_requested(lp->type_str) || _striped_type_requested(lp->type_str)) { /* striped or linear or raid0 */
			if (arg_from_list_is_set(cmd, "cannot be used with --type raid0 or --type striped or --type linear",
						 chunksize_ARG, corelog_ARG, mirrors_ARG, mirrorlog_ARG, regionsize_ARG, zero_ARG,
						 -1))
				return_0;
		} /* else segtype will default to current type */
	}

	lp->force = arg_count(cmd, force_ARG);
	lp->yes = arg_count(cmd, yes_ARG);

	if (!_lvconvert_name_params(lp, cmd, &argc, &argv))
		return_0;

	lp->pv_count = argc;
	lp->pvs = argv;

	return 1;
}

static struct poll_functions _lvconvert_mirror_fns = {
	.poll_progress = poll_mirror_progress,
	.finish_copy = lvconvert_mirror_finish,
};

static struct poll_functions _lvconvert_merge_fns = {
	.poll_progress = poll_merge_progress,
	.finish_copy = lvconvert_merge_finish,
};

static struct poll_functions _lvconvert_thin_merge_fns = {
	.poll_progress = poll_thin_merge_progress,
	.finish_copy = lvconvert_merge_finish,
};

static struct poll_operation_id *_create_id(struct cmd_context *cmd,
					    const char *vg_name,
					    const char *lv_name,
					    const char *uuid)
{
	struct poll_operation_id *id;
	char lv_full_name[NAME_LEN];

	if (!vg_name || !lv_name || !uuid) {
		log_error(INTERNAL_ERROR "Wrong params for lvconvert _create_id.");
		return NULL;
	}

	if (dm_snprintf(lv_full_name, sizeof(lv_full_name), "%s/%s", vg_name, lv_name) < 0) {
		log_error(INTERNAL_ERROR "Name \"%s/%s\" is too long.", vg_name, lv_name);
		return NULL;
	}

	if (!(id = dm_pool_alloc(cmd->mem, sizeof(*id)))) {
		log_error("Poll operation ID allocation failed.");
		return NULL;
	}

	if (!(id->display_name = dm_pool_strdup(cmd->mem, lv_full_name)) ||
	    !(id->lv_name = strchr(id->display_name, '/')) ||
	    !(id->vg_name = dm_pool_strdup(cmd->mem, vg_name)) ||
	    !(id->uuid = dm_pool_strdup(cmd->mem, uuid))) {
		log_error("Failed to copy one or more poll operation ID members.");
		dm_pool_free(cmd->mem, id);
		return NULL;
	}

	id->lv_name++; /* skip over '/' */

	return id;
}

static int _lvconvert_poll_by_id(struct cmd_context *cmd, struct poll_operation_id *id,
				 unsigned background,
				 int is_merging_origin,
				 int is_merging_origin_thin)
{
	if (test_mode())
		return ECMD_PROCESSED;

	if (is_merging_origin)
		return poll_daemon(cmd, background,
				(MERGING | (is_merging_origin_thin ? THIN_VOLUME : SNAPSHOT)),
				is_merging_origin_thin ? &_lvconvert_thin_merge_fns : &_lvconvert_merge_fns,
				"Merged", id);
	else
		return poll_daemon(cmd, background, CONVERTING,
				&_lvconvert_mirror_fns, "Converted", id);
}

int lvconvert_poll(struct cmd_context *cmd, struct logical_volume *lv,
		   unsigned background)
{
	int r;
	struct poll_operation_id *id = _create_id(cmd, lv->vg->name, lv->name, lv->lvid.s);
	int is_merging_origin = 0;
	int is_merging_origin_thin = 0;

	if (!id) {
		log_error("Failed to allocate poll identifier for lvconvert.");
		return ECMD_FAILED;
	}

	/* FIXME: check this in polling instead */
	if (lv_is_merging_origin(lv)) {
		is_merging_origin = 1;
		is_merging_origin_thin = seg_is_thin_volume(find_snapshot(lv));
	}

	r = _lvconvert_poll_by_id(cmd, id, background, is_merging_origin, is_merging_origin_thin);

	return r;
}

static int _insert_lvconvert_layer(struct cmd_context *cmd,
				   struct logical_volume *lv)
{
	char format[NAME_LEN], layer_name[NAME_LEN];
	int i;

	/*
	 * We would like to give the same number for this layer
	 * and the newly added mimage.
	 * However, LV name of newly added mimage is determined *after*
	 * the LV name of this layer is determined.
	 *
	 * So, use generate_lv_name() to generate mimage name first
	 * and take the number from it.
	 */

	if (dm_snprintf(format, sizeof(format), "%s_mimage_%%d", lv->name) < 0) {
		log_error("lvconvert: layer name creation failed.");
		return 0;
	}

	if (!generate_lv_name(lv->vg, format, layer_name, sizeof(layer_name)) ||
	    sscanf(layer_name, format, &i) != 1) {
		log_error("lvconvert: layer name generation failed.");
		return 0;
	}

	if (dm_snprintf(layer_name, sizeof(layer_name), MIRROR_SYNC_LAYER "_%d", i) < 0) {
		log_error("layer name creation failed.");
		return 0;
	}

	if (!insert_layer_for_lv(cmd, lv, 0, layer_name)) {
		log_error("Failed to insert resync layer");
		return 0;
	}

	return 1;
}

static int _failed_mirrors_count(struct logical_volume *lv)
{
	struct lv_segment *lvseg;
	int ret = 0;
	unsigned s;

	dm_list_iterate_items(lvseg, &lv->segments) {
		if (!seg_is_mirrored(lvseg))
			return -1;
		for (s = 0; s < lvseg->area_count; s++) {
			if (seg_type(lvseg, s) == AREA_LV) {
				if (is_temporary_mirror_layer(seg_lv(lvseg, s)))
					ret += _failed_mirrors_count(seg_lv(lvseg, s));
				else if (lv_is_partial(seg_lv(lvseg, s)))
					++ ret;
			}
			else if (seg_type(lvseg, s) == AREA_PV &&
				 is_missing_pv(seg_pv(lvseg, s)))
				++ret;
		}
	}

	return ret;
}

static int _failed_logs_count(struct logical_volume *lv)
{
	int ret = 0;
	unsigned s;
	struct logical_volume *log_lv = first_seg(lv)->log_lv;
	if (log_lv && lv_is_partial(log_lv)) {
		if (lv_is_mirrored(log_lv))
			ret += _failed_mirrors_count(log_lv);
		else
			ret += 1;
	}
	for (s = 0; s < first_seg(lv)->area_count; s++) {
		if (seg_type(first_seg(lv), s) == AREA_LV &&
		    is_temporary_mirror_layer(seg_lv(first_seg(lv), s)))
			ret += _failed_logs_count(seg_lv(first_seg(lv), s));
	}
	return ret;
}


static struct dm_list *_failed_pv_list(struct volume_group *vg)
{
	struct dm_list *failed_pvs;
	struct pv_list *pvl, *new_pvl;

	if (!(failed_pvs = dm_pool_alloc(vg->vgmem, sizeof(*failed_pvs)))) {
		log_error("Allocation of list of failed_pvs failed.");
		return NULL;
	}

	dm_list_init(failed_pvs);

	dm_list_iterate_items(pvl, &vg->pvs) {
		if (!is_missing_pv(pvl->pv))
			continue;

		/*
		 * Finally, --repair will remove empty PVs.
		 * But we only want remove these which are output of repair,
		 * Do not count these which are already empty here.
		 * FIXME: code should traverse PV in LV not in whole VG.
		 * FIXME: layer violation? should it depend on vgreduce --removemising?
		 */
		if (pvl->pv->pe_alloc_count == 0)
			continue;

		if (!(new_pvl = dm_pool_alloc(vg->vgmem, sizeof(*new_pvl)))) {
			log_error("Allocation of failed_pvs list entry failed.");
			return NULL;
		}
		new_pvl->pv = pvl->pv;
		dm_list_add(failed_pvs, &new_pvl->list);
	}

	return failed_pvs;
}

static int _is_partial_lv(struct logical_volume *lv,
			  void *baton __attribute__((unused)))
{
	return lv_is_partial(lv);
}

/*
 * Walk down the stacked mirror LV to the original mirror LV.
 */
static struct logical_volume *_original_lv(struct logical_volume *lv)
{
	struct logical_volume *next_lv = lv, *tmp_lv;

	while ((tmp_lv = find_temporary_mirror(next_lv)))
		next_lv = tmp_lv;

	return next_lv;
}

static void _lvconvert_mirrors_repair_ask(struct cmd_context *cmd,
					  int failed_log, int failed_mirrors,
					  int *replace_log, int *replace_mirrors)
{
	const char *leg_policy, *log_policy;
	int force = arg_count(cmd, force_ARG);
	int yes = arg_count(cmd, yes_ARG);

	if (arg_is_set(cmd, usepolicies_ARG)) {
		leg_policy = find_config_tree_str(cmd, activation_mirror_image_fault_policy_CFG, NULL);
		log_policy = find_config_tree_str(cmd, activation_mirror_log_fault_policy_CFG, NULL);
		*replace_mirrors = strcmp(leg_policy, "remove");
		*replace_log = strcmp(log_policy, "remove");
		return;
	}

	if (force != PROMPT) {
		*replace_log = *replace_mirrors = 0;
		return;
	}

	*replace_log = *replace_mirrors = 1;

	if (yes)
		return;

	if (failed_log &&
	    yes_no_prompt("Attempt to replace failed mirror log? [y/n]: ") == 'n')
		*replace_log = 0;

	if (failed_mirrors &&
	    yes_no_prompt("Attempt to replace failed mirror images "
			  "(requires full device resync)? [y/n]: ") == 'n')
		*replace_mirrors = 0;
}

/*
 * _get_log_count
 * @lv: the mirror LV
 *
 * Get the number of on-disk copies of the log.
 *  0  = 'core'
 *  1  = 'disk'
 *  2+ = 'mirrored'
 */
static uint32_t _get_log_count(struct logical_volume *lv)
{
	struct logical_volume *log_lv;

	log_lv = first_seg(_original_lv(lv))->log_lv;
	if (log_lv)
		return lv_mirror_count(log_lv);

	return 0;
}

static int _lv_update_mirrored_log(struct logical_volume *lv,
				   struct dm_list *operable_pvs,
				   int log_count)
{
	int old_log_count;
	struct logical_volume *log_lv;

	/*
	 * When log_count is 0, mirrored log doesn't need to be
	 * updated here but it will be removed later.
	 */
	if (!log_count)
		return 1;

	log_lv = first_seg(_original_lv(lv))->log_lv;
	if (!log_lv || !lv_is_mirrored(log_lv))
		return 1;

	old_log_count = _get_log_count(lv);
	if (old_log_count == log_count)
		return 1;

	/* Reducing redundancy of the log */
	return remove_mirror_images(log_lv, log_count,
				    is_mirror_image_removable,
				    operable_pvs, 0U);
}

static int _lv_update_log_type(struct cmd_context *cmd,
			       struct lvconvert_params *lp,
			       struct logical_volume *lv,
			       struct dm_list *operable_pvs,
			       int log_count)
{
	int old_log_count;
	uint32_t region_size = (lp) ? lp->region_size :
		first_seg(lv)->region_size;
	alloc_policy_t alloc = (lp) ? lp->alloc : lv->alloc;
	struct logical_volume *original_lv;
	struct logical_volume *log_lv;

	old_log_count = _get_log_count(lv);
	if (old_log_count == log_count)
		return 1;

	original_lv = _original_lv(lv);
	/* Remove an existing log completely */
	if (!log_count) {
		if (!remove_mirror_log(cmd, original_lv, operable_pvs,
				       arg_count(cmd, yes_ARG) ||
				       arg_count(cmd, force_ARG)))
			return_0;
		return 1;
	}

	log_lv = first_seg(original_lv)->log_lv;

	/* Adding redundancy to the log */
	if (old_log_count < log_count) {
		region_size = adjusted_mirror_region_size(lv->vg->extent_size,
							  lv->le_count,
							  region_size, 0,
							  vg_is_clustered(lv->vg));

		if (!add_mirror_log(cmd, original_lv, log_count,
				    region_size, operable_pvs, alloc))
			return_0;
		/*
		 * FIXME: This simple approach won't work in cluster mirrors,
		 *	  but it doesn't matter because we don't support
		 *	  mirrored logs in cluster mirrors.
		 */
		if (old_log_count &&
		    !lv_update_and_reload(log_lv))
			return_0;

		return 1;
	}

	/* Reducing redundancy of the log */
	return remove_mirror_images(log_lv, log_count,
				    is_mirror_image_removable, operable_pvs, 1U);
}

/*
 * Reomove missing and empty PVs from VG, if are also in provided list
 */
static void _remove_missing_empty_pv(struct volume_group *vg, struct dm_list *remove_pvs)
{
	struct pv_list *pvl, *pvl_vg, *pvlt;
	int removed = 0;

	if (!remove_pvs)
		return;

	dm_list_iterate_items(pvl, remove_pvs) {
		dm_list_iterate_items_safe(pvl_vg, pvlt, &vg->pvs) {
			if (!id_equal(&pvl->pv->id, &pvl_vg->pv->id) ||
			    !is_missing_pv(pvl_vg->pv) ||
			    pvl_vg->pv->pe_alloc_count != 0)
				continue;

			/* FIXME: duplication of vgreduce code, move this to library */
			vg->free_count -= pvl_vg->pv->pe_count;
			vg->extent_count -= pvl_vg->pv->pe_count;
			del_pvl_from_vgs(vg, pvl_vg);
			free_pv_fid(pvl_vg->pv);

			removed++;
		}
	}

	if (removed) {
		if (!vg_write(vg) || !vg_commit(vg)) {
			stack;
			return;
		}
		log_warn("%d missing and now unallocated Physical Volumes removed from VG.", removed);
	}
}

/*
 * _lvconvert_mirrors_parse_params
 *
 * This function performs the following:
 *  1) Gets the old values of mimage and log counts
 *  2) Parses the CLI args to find the new desired values
 *  3) Adjusts 'lp->mirrors' to the appropriate absolute value.
 *     (Remember, 'lp->mirrors' is specified in terms of the number of "copies"
 *     vs. the number of mimages.  It can also be a relative value.)
 *  4) Sets 'lp->need_polling' if collapsing
 *  5) Validates other mirror params
 *
 * Returns: 1 on success, 0 on error
 */
static int _lvconvert_mirrors_parse_params(struct cmd_context *cmd,
					   struct logical_volume *lv,
					   struct lvconvert_params *lp,
					   uint32_t *old_mimage_count,
					   uint32_t *old_log_count,
					   uint32_t *new_mimage_count,
					   uint32_t *new_log_count)
{
	*old_mimage_count = lv_mirror_count(lv);
	*old_log_count = _get_log_count(lv);

	if (is_lockd_type(lv->vg->lock_type) && lp->keep_mimages) {
		/* FIXME: we need to create a lock for the new LV. */
		log_error("Unable to split mirrors in VG with lock_type %s", lv->vg->lock_type);
		return 0;
	}

	/*
	 * Collapsing a stack of mirrors:
	 *
	 * If called with no argument, try collapsing the resync layers
	 */
	if (!lp->mirrors_supplied && !lp->mirrorlog &&
	    !lp->corelog && !arg_is_set(cmd, regionsize_ARG) &&
	    !lp->keep_mimages && !lp->repair) {
		*new_mimage_count = *old_mimage_count;
		*new_log_count = *old_log_count;

		if (find_temporary_mirror(lv) || lv_is_converting(lv))
			lp->need_polling = 1;
		return 1;
	}

	/*
	 * Adjusting mimage count?
	 */
	if (!lp->mirrors_supplied && !lp->keep_mimages)
		lp->mirrors = *old_mimage_count;
	else if (lp->mirrors_sign == SIGN_PLUS)
		lp->mirrors = *old_mimage_count + lp->mirrors;
	else if (lp->mirrors_sign == SIGN_MINUS)
		lp->mirrors = (*old_mimage_count > lp->mirrors) ?
			*old_mimage_count - lp->mirrors: 0;
	else
		lp->mirrors += 1;

	*new_mimage_count = lp->mirrors;

	/* Too many mimages? */
	if (lp->mirrors > DEFAULT_MIRROR_MAX_IMAGES) {
		log_error("Only up to %d images in mirror supported currently.",
			  DEFAULT_MIRROR_MAX_IMAGES);
		return 0;
	}

	/* Did the user try to subtract more legs than available? */
	if (lp->mirrors < 1) {
		log_error("Unable to reduce images by specified amount - only %d in %s",
			  *old_mimage_count, lv->name);
		return 0;
	}

	/*
	 * FIXME: It would be nice to say what we are adjusting to, but
	 * I really don't know whether to specify the # of copies or mimages.
	 */
	if (*old_mimage_count != *new_mimage_count)
		log_verbose("Adjusting mirror image count of %s", lv->name);

	/*
	 * Adjust log type
	 *
	 * If we are converting from a mirror to another mirror or simply
	 * changing the log type, we start by assuming they want the log
	 * type the same and then parse the given args.  OTOH, If we are
	 * converting from linear to mirror, then we start from the default
	 * position that the user would like a 'disk' log.
	 */
	*new_log_count = (*old_mimage_count > 1) ? *old_log_count : 1;
	if (!lp->corelog && !lp->mirrorlog)
		return 1;

	*new_log_count = arg_int_value(cmd, mirrorlog_ARG, lp->corelog ? MIRROR_LOG_CORE : DEFAULT_MIRRORLOG);

	/*
	 * No mirrored logs for cluster mirrors until
	 * log daemon is multi-threaded.
	 */
	if ((*new_log_count == MIRROR_LOG_MIRRORED) && vg_is_clustered(lv->vg)) {
		log_error("Log type, \"mirrored\", is unavailable to cluster mirrors.");
		return 0;
	}

	log_verbose("Setting logging type to %s.", get_mirror_log_name(*new_log_count));

	/*
	 * Region size must not change on existing mirrors
	 */
	if (arg_is_set(cmd, regionsize_ARG) && lv_is_mirrored(lv) &&
	    (lp->region_size != first_seg(lv)->region_size)) {
		log_error("Mirror log region size cannot be changed on "
			  "an existing mirror.");
		return 0;
	}

	/*
	 * For the most part, we cannot handle multi-segment mirrors. Bail out
	 * early if we have encountered one.
	 */
	if (lv_is_mirrored(lv) && dm_list_size(&lv->segments) != 1) {
		log_error("Logical volume %s has multiple "
			  "mirror segments.", display_lvname(lv));
		return 0;
	}

	return 1;
}

/*
 * _lvconvert_mirrors_aux
 *
 * Add/remove mirror images and adjust log type.  'operable_pvs'
 * are the set of PVs open to removal or allocation - depending
 * on the operation being performed.
 */
static int _lvconvert_mirrors_aux(struct cmd_context *cmd,
				  struct logical_volume *lv,
				  struct lvconvert_params *lp,
				  struct dm_list *operable_pvs,
				  uint32_t new_mimage_count,
				  uint32_t new_log_count)
{
	uint32_t region_size;
	struct lv_segment *seg = first_seg(lv);
	struct logical_volume *layer_lv;
	uint32_t old_mimage_count = lv_mirror_count(lv);
	uint32_t old_log_count = _get_log_count(lv);

	if ((lp->mirrors == 1) && !lv_is_mirrored(lv)) {
		log_warn("Logical volume %s is already not mirrored.",
			 display_lvname(lv));
		return 1;
	}

	region_size = adjusted_mirror_region_size(lv->vg->extent_size,
						  lv->le_count,
						  lp->region_size ? : seg->region_size, 0,
						  vg_is_clustered(lv->vg));

	if (!operable_pvs)
		operable_pvs = lp->pvh;

	/*
	 * Up-convert from linear to mirror
	 */
	if (!lv_is_mirrored(lv)) {
		/* FIXME Share code with lvcreate */

		/*
		 * FIXME should we give not only lp->pvh, but also all PVs
		 * currently taken by the mirror? Would make more sense from
		 * user perspective.
		 */
		if (!lv_add_mirrors(cmd, lv, new_mimage_count - 1, lp->stripes,
				    lp->stripe_size, region_size, new_log_count, operable_pvs,
				    lp->alloc, MIRROR_BY_LV))
			return_0;

		if (lp->wait_completion)
			lp->need_polling = 1;

		goto out;
	}

	/*
	 * Up-convert m-way mirror to n-way mirror
	 */
	if (new_mimage_count > old_mimage_count) {
		if (lv_is_not_synced(lv)) {
			log_error("Can't add mirror to out-of-sync mirrored "
				  "LV: use lvchange --resync first.");
			return 0;
		}

		/*
		 * We allow snapshots of mirrors, but for now, we
		 * do not allow up converting mirrors that are under
		 * snapshots.  The layering logic is somewhat complex,
		 * and preliminary test show that the conversion can't
		 * seem to get the correct %'age of completion.
		 */
		if (lv_is_origin(lv)) {
			log_error("Can't add additional mirror images to "
				  "mirror %s which is under snapshots.",
				  display_lvname(lv));
			return 0;
		}

		/*
		 * Is there already a convert in progress?  We do not
		 * currently allow more than one.
		 */
		if (find_temporary_mirror(lv) || lv_is_converting(lv)) {
			log_error("%s is already being converted.  Unable to start another conversion.",
				  display_lvname(lv));
			return 0;
		}

		/*
		 * Log addition/removal should be done before the layer
		 * insertion to make the end result consistent with
		 * linear-to-mirror conversion.
		 */
		if (!_lv_update_log_type(cmd, lp, lv,
					 operable_pvs, new_log_count))
			return_0;

		/* Insert a temporary layer for syncing,
		 * only if the original lv is using disk log. */
		if (seg->log_lv && !_insert_lvconvert_layer(cmd, lv)) {
			log_error("Failed to insert resync layer.");
			return 0;
		}

		/* FIXME: can't have multiple mlogs. force corelog. */
		if (!lv_add_mirrors(cmd, lv,
				    new_mimage_count - old_mimage_count,
				    lp->stripes, lp->stripe_size,
				    region_size, 0U, operable_pvs, lp->alloc,
				    MIRROR_BY_LV)) {
			layer_lv = seg_lv(first_seg(lv), 0);
			if (!remove_layer_from_lv(lv, layer_lv) ||
			    !deactivate_lv(cmd, layer_lv) ||
			    !lv_remove(layer_lv) ||
			    !vg_write(lv->vg) || !vg_commit(lv->vg)) {
				log_error("ABORTING: Failed to remove "
					  "temporary mirror layer %s.",
					  display_lvname(layer_lv));
				log_error("Manual cleanup with vgcfgrestore "
					  "and dmsetup may be required.");
				return 0;
			}

			return_0;
		}
		if (seg->log_lv)
			lv->status |= CONVERTING;
		lp->need_polling = 1;

		goto out_skip_log_convert;
	}

	/*
	 * Down-convert (reduce # of mimages).
	 */
	if (new_mimage_count < old_mimage_count) {
		uint32_t nmc = old_mimage_count - new_mimage_count;
		uint32_t nlc = (!new_log_count || lp->mirrors == 1) ? 1U : 0U;

		/* FIXME: Why did nlc used to be calculated that way? */

		/* Reduce number of mirrors */
		if (lp->keep_mimages) {
			if (lp->track_changes) {
				log_error("--trackchanges is not available "
					  "to 'mirror' segment type.");
				return 0;
			}
			if (!lv_split_mirror_images(lv, lp->lv_split_name,
						    nmc, operable_pvs))
				return_0;
		} else if (!lv_remove_mirrors(cmd, lv, nmc, nlc,
					      is_mirror_image_removable, operable_pvs, 0))
			return_0;

		goto out; /* Just in case someone puts code between */
	}

out:
	/*
	 * Converting the log type
	 */
	if (lv_is_mirrored(lv) && (old_log_count != new_log_count)) {
		if (!_lv_update_log_type(cmd, lp, lv,
					 operable_pvs, new_log_count))
			return_0;
	}

out_skip_log_convert:

	if (!lv_update_and_reload(lv))
		return_0;

	return 1;
}

int mirror_remove_missing(struct cmd_context *cmd,
			  struct logical_volume *lv, int force)
{
	struct dm_list *failed_pvs;
	int log_count = _get_log_count(lv) - _failed_logs_count(lv);

	if (!(failed_pvs = _failed_pv_list(lv->vg)))
		return_0;

	if (force && _failed_mirrors_count(lv) == (int)lv_mirror_count(lv)) {
		log_error("No usable images left in %s.", display_lvname(lv));
		return lv_remove_with_dependencies(cmd, lv, DONT_PROMPT, 0);
	}

	/*
	 * We must adjust the log first, or the entire mirror
	 * will get stuck during a suspend.
	 */
	if (!_lv_update_mirrored_log(lv, failed_pvs, log_count))
		return_0;

	if (_failed_mirrors_count(lv) > 0 &&
	    !lv_remove_mirrors(cmd, lv, _failed_mirrors_count(lv),
			       log_count ? 0U : 1U,
			       _is_partial_lv, NULL, 0))
		return_0;

	if (lv_is_mirrored(lv) &&
	    !_lv_update_log_type(cmd, NULL, lv, failed_pvs, log_count))
		return_0;

	if (!lv_update_and_reload(lv))
		return_0;

	return 1;
}

/*
 * _lvconvert_mirrors_repair
 *
 * This function operates in two phases.  First, all of the bad
 * devices are removed from the mirror.  Then, if desired by the
 * user, the devices are replaced.
 *
 * 'old_mimage_count' and 'old_log_count' are there so we know
 * what to convert to after the removal of devices.
 */
static int _lvconvert_mirrors_repair(struct cmd_context *cmd,
				     struct logical_volume *lv,
				     struct lvconvert_params *lp)
{
	int failed_logs;
	int failed_mimages;
	int replace_logs = 0;
	int replace_mimages = 0;
	uint32_t log_count;

	uint32_t original_mimages = lv_mirror_count(lv);
	uint32_t original_logs = _get_log_count(lv);

	cmd->handles_missing_pvs = 1;
	cmd->partial_activation = 1;
	lp->need_polling = 0;

	lv_check_transient(lv); /* TODO check this in lib for all commands? */

	if (!lv_is_partial(lv)) {
		log_print_unless_silent("Volume %s is consistent. Nothing to repair.",
					display_lvname(lv));
		return 1;
	}

	failed_mimages = _failed_mirrors_count(lv);
	failed_logs = _failed_logs_count(lv);

	/* Retain existing region size in case we need it later */
	if (!lp->region_size)
		lp->region_size = first_seg(lv)->region_size;

	if (!mirror_remove_missing(cmd, lv, 0))
		return_0;

	if (failed_mimages)
		log_print_unless_silent("Mirror status: %d of %d images failed.",
					failed_mimages, original_mimages);

	/*
	 * Count the failed log devices
	 */
	if (failed_logs)
		log_print_unless_silent("Mirror log status: %d of %d images failed.",
					failed_logs, original_logs);

	/*
	 * Find out our policies
	 */
	_lvconvert_mirrors_repair_ask(cmd, failed_logs, failed_mimages,
				      &replace_logs, &replace_mimages);

	/*
	 * Second phase - replace faulty devices
	 */
	lp->mirrors = replace_mimages ? original_mimages : (original_mimages - failed_mimages);

	/*
	 * It does not make sense to replace the log if the volume is no longer
	 * a mirror.
	 */
	if (lp->mirrors == 1)
		replace_logs = 0;

	log_count = replace_logs ? original_logs : (original_logs - failed_logs);

	while (replace_mimages || replace_logs) {
		log_warn("Trying to up-convert to %d images, %d logs.", lp->mirrors, log_count);
		if (_lvconvert_mirrors_aux(cmd, lv, lp, NULL,
					   lp->mirrors, log_count))
			break;
		if (lp->mirrors > 2)
			--lp->mirrors;
		else if (log_count > 0)
			--log_count;
		else
			break; /* nowhere to go, anymore... */
	}

	if (replace_mimages && lv_mirror_count(lv) != original_mimages)
		log_warn("WARNING: Failed to replace %d of %d images in volume %s.",
			 original_mimages - lv_mirror_count(lv), original_mimages,
			 display_lvname(lv));
	if (replace_logs && _get_log_count(lv) != original_logs)
		log_warn("WARNING: Failed to replace %d of %d logs in volume %s.",
			 original_logs - _get_log_count(lv), original_logs,
			 display_lvname(lv));

	/* if (!arg_is_set(cmd, use_policies_ARG) && (lp->mirrors != old_mimage_count
						  || log_count != old_log_count))
						  return 0; */

	return 1;
}

static int _lvconvert_validate_thin(struct logical_volume *lv,
				    struct lvconvert_params *lp)
{
	if (!lv_is_thin_pool(lv) && !lv_is_thin_volume(lv))
		return 1;

	log_error("Converting thin%s segment type for %s to %s is not supported.",
		  lv_is_thin_pool(lv) ? " pool" : "",
		  display_lvname(lv), lp->segtype->name);

	if (lv_is_thin_volume(lv))
		return 0;

	/* Give advice for thin pool conversion */
	log_error("For pool data volume conversion use %s.",
		  display_lvname(seg_lv(first_seg(lv), 0)));
	log_error("For pool metadata volume conversion use %s.",
		  display_lvname(first_seg(lv)->metadata_lv));

	return 0;
}

/*
 * _lvconvert_mirrors
 *
 * Determine what is being done.  Are we doing a conversion, repair, or
 * collapsing a stack?  Once determined, call helper functions.
 */
static int _lvconvert_mirrors(struct cmd_context *cmd,
			      struct logical_volume *lv,
			      struct lvconvert_params *lp)
{
	uint32_t old_mimage_count;
	uint32_t old_log_count;
	uint32_t new_mimage_count;
	uint32_t new_log_count;

	if ((lp->corelog || lp->mirrorlog) && *lp->type_str && strcmp(lp->type_str, SEG_TYPE_NAME_MIRROR)) {
		log_error("--corelog and --mirrorlog are only compatible with mirror devices.");
		return 0;
	}

	if (lp->merge_mirror) {
		log_error("Unable to merge mirror images of segment type 'mirror'.");
		return 0;
	}

	if (!_lvconvert_validate_thin(lv, lp))
		return_0;

	if (lv_is_thin_type(lv)) {
		log_error("Mirror segment type cannot be used for thinpool%s.\n"
			  "Try \"%s\" segment type instead.",
			  lv_is_thin_pool_data(lv) ? "s" : " metadata",
			  SEG_TYPE_NAME_RAID1);
		return 0;
	}

	if (lv_is_cache_type(lv)) {
		log_error("Mirrors are not yet supported on cache LVs %s.",
			  display_lvname(lv));
		return 0;
	}

	if (_linear_type_requested(lp->type_str)) {
		if (arg_is_set(cmd, mirrors_ARG) && (arg_uint_value(cmd, mirrors_ARG, 0) != 0)) {
			log_error("Cannot specify mirrors with linear type.");
			return 0;
		}
		lp->mirrors_supplied = 1;
		lp->mirrors = 0;
	}

	/* Adjust mimage and/or log count */
	if (!_lvconvert_mirrors_parse_params(cmd, lv, lp,
					     &old_mimage_count, &old_log_count,
					     &new_mimage_count, &new_log_count))
		return_0;

	if (((old_mimage_count < new_mimage_count && old_log_count > new_log_count) ||
	     (old_mimage_count > new_mimage_count && old_log_count < new_log_count)) &&
	    lp->pv_count) {
		log_error("Cannot both allocate and free extents when "
			  "specifying physical volumes to use.");
		log_error("Please specify the operation in two steps.");
		return 0;
	}

	/* Nothing to do?  (Probably finishing collapse.) */
	if ((old_mimage_count == new_mimage_count) &&
	    (old_log_count == new_log_count) && !lp->repair)
		return 1;

	if (lp->repair)
		return _lvconvert_mirrors_repair(cmd, lv, lp);

	if (!_lvconvert_mirrors_aux(cmd, lv, lp, NULL,
				    new_mimage_count, new_log_count))
		return_0;

	backup(lv->vg);

	if (!lp->need_polling)
		log_print_unless_silent("Logical volume %s converted.",
					display_lvname(lv));
	else
		log_print_unless_silent("Logical volume %s being converted.",
					display_lvname(lv));

	return 1;
}

static int _is_valid_raid_conversion(const struct segment_type *from_segtype,
				    const struct segment_type *to_segtype)
{
	if (from_segtype == to_segtype)
		return 1;

	/* Support raid0 <-> striped conversions */
	if (segtype_is_striped(from_segtype) && segtype_is_striped(to_segtype))
		return 1;

	if (!segtype_is_raid(from_segtype) && !segtype_is_raid(to_segtype))
		return_0;  /* Not converting to or from RAID? */

	return 1;
}

static void _lvconvert_raid_repair_ask(struct cmd_context *cmd,
				       struct lvconvert_params *lp,
				       int *replace_dev)
{
	const char *dev_policy;

	*replace_dev = 1;

	if (arg_is_set(cmd, usepolicies_ARG)) {
		dev_policy = find_config_tree_str(cmd, activation_raid_fault_policy_CFG, NULL);

		if (!strcmp(dev_policy, "allocate") ||
		    !strcmp(dev_policy, "replace"))
			return;

		/* else if (!strcmp(dev_policy, "anything_else")) -- no replace */
		*replace_dev = 0;
		return;
	}

	if (!lp->yes &&
	    yes_no_prompt("Attempt to replace failed RAID images "
			  "(requires full device resync)? [y/n]: ") == 'n') {
		*replace_dev = 0;
	}
}

/* Check for dm-raid target supporting raid4 conversion properly. */
static int _raid4_conversion_supported(struct logical_volume *lv, struct lvconvert_params *lp)
{
	int ret = 1;
	struct lv_segment *seg = first_seg(lv);

	if (seg_is_raid4(seg))
		ret = raid4_is_supported(lv->vg->cmd, seg->segtype);
	else if (segtype_is_raid4(lp->segtype))
		ret = raid4_is_supported(lv->vg->cmd, lp->segtype);

	if (ret)
		return 1;

	log_error("Cannot convert %s LV %s to %s.",
		  lvseg_name(seg), display_lvname(lv), lp->segtype->name);
	return 0;
}

static int _lvconvert_raid(struct logical_volume *lv, struct lvconvert_params *lp)
{
	int replace = 0, image_count = 0;
	struct dm_list *failed_pvs;
	struct cmd_context *cmd = lv->vg->cmd;
	struct lv_segment *seg = first_seg(lv);

	if (_linear_type_requested(lp->type_str)) {
		if (arg_is_set(cmd, mirrors_ARG) && (arg_uint_value(cmd, mirrors_ARG, 0) != 0)) {
			log_error("Cannot specify mirrors with linear type.");
			return 0;
		}
		lp->mirrors_supplied = 1;
		lp->mirrors = 0;
	}

	/* Can only change image count for raid1 and linear */
	if (lp->mirrors_supplied) {
		if (_raid0_type_requested(lp->type_str)) {
			log_error("--mirrors/-m is not compatible with conversion to %s.",
				  lp->type_str);
			return 0;
		}
		if (!seg_is_mirrored(seg) && !seg_is_linear(seg)) {
			log_error("--mirrors/-m is not compatible with %s.",
				  lvseg_name(seg));
			return 0;
		}
		if (seg_is_raid10(seg)) {
			log_error("--mirrors/-m cannot be changed with %s.",
				  lvseg_name(seg));
			return 0;
		}
	}

	if (!_lvconvert_validate_thin(lv, lp))
		return_0;

	if (!_is_valid_raid_conversion(seg->segtype, lp->segtype))
		goto try_new_takeover_or_reshape;

	if (seg_is_linear(seg) && !lp->merge_mirror && !lp->mirrors_supplied) {
		if (_raid0_type_requested(lp->type_str)) {
			log_error("Linear LV %s cannot be converted to %s.",
				  display_lvname(lv), lp->type_str);
			return 0;
		} else if (!strcmp(lp->type_str, SEG_TYPE_NAME_RAID1)) {
			log_error("Raid conversions of LV %s require -m/--mirrors.",
				  display_lvname(lv));
			return 0;
		}
		goto try_new_takeover_or_reshape;
	}

	/* Change number of RAID1 images */
	if (lp->mirrors_supplied || lp->keep_mimages) {
		image_count = lv_raid_image_count(lv);
		if (lp->mirrors_sign == SIGN_PLUS)
			image_count += lp->mirrors;
		else if (lp->mirrors_sign == SIGN_MINUS)
			image_count -= lp->mirrors;
		else
			image_count = lp->mirrors + 1;

		if (image_count < 1) {
			log_error("Unable to %s images by specified amount.",
				  lp->keep_mimages ? "split" : "reduce");
			return 0;
		}

		/* --trackchanges requires --splitmirrors which always has SIGN_MINUS */
		if (lp->track_changes && lp->mirrors != 1) {
			log_error("Exactly one image must be split off from %s when tracking changes.",
				  display_lvname(lv));
			return 0;
		}
	}

	if ((lp->corelog || lp->mirrorlog) && strcmp(lp->type_str, SEG_TYPE_NAME_MIRROR)) {
		log_error("--corelog and --mirrorlog are only compatible with mirror devices");
		return 0;
	}

	if (lp->merge_mirror)
		return lv_raid_merge(lv);

	if (lp->track_changes)
		return lv_raid_split_and_track(lv, lp->pvh);

	if (lp->keep_mimages)
		return lv_raid_split(lv, lp->lv_split_name, image_count, lp->pvh);

	if (lp->mirrors_supplied) {
		if (!*lp->type_str || !strcmp(lp->type_str, SEG_TYPE_NAME_RAID1) || !strcmp(lp->type_str, SEG_TYPE_NAME_LINEAR) ||
		    (!strcmp(lp->type_str, SEG_TYPE_NAME_STRIPED) && image_count == 1)) {
			if (image_count > DEFAULT_RAID1_MAX_IMAGES) {
				log_error("Only up to %u mirrors in %s LV %s supported currently.",
					  DEFAULT_RAID1_MAX_IMAGES, lp->segtype->name, display_lvname(lv));
				return 0;
			}
			if (!lv_raid_change_image_count(lv, image_count, lp->pvh))
				return_0;

			log_print_unless_silent("Logical volume %s successfully converted.",
						display_lvname(lv));

			return 1;
		}
		goto try_new_takeover_or_reshape;
	} else if (!lp->repair && !lp->replace && (!*lp->type_str || seg->segtype == lp->segtype)) {
		log_error("Conversion operation not yet supported.");
		return 0;
	}

	if ((seg_is_linear(seg) || seg_is_striped(seg) || seg_is_mirrored(seg) || lv_is_raid(lv)) &&
	    (lp->type_str && lp->type_str[0])) {
		/* Activation is required later which precludes existing supported raid0 segment */
		if ((seg_is_any_raid0(seg) || segtype_is_any_raid0(lp->segtype)) &&
		    !(lp->target_attr & RAID_FEATURE_RAID0)) {
			log_error("RAID module does not support RAID0.");
			return 0;
		}

		/* Activation is required later which precludes existing supported raid4 segment */
		if (!_raid4_conversion_supported(lv, lp))
			return_0;

		/* Activation is required later which precludes existing supported raid10 segment */
		if ((seg_is_raid10(seg) || segtype_is_raid10(lp->segtype)) &&
		    !(lp->target_attr & RAID_FEATURE_RAID10)) {
			log_error("RAID module does not support RAID10.");
			return 0;
		}

		if (!arg_is_set(cmd, stripes_long_ARG))
			lp->stripes = 0;

		if (!lv_raid_convert(lv, lp->segtype, lp->yes, lp->force, lp->stripes, lp->stripe_size_supplied, lp->stripe_size,
				     lp->region_size, lp->pvh))
			return_0;

		log_print_unless_silent("Logical volume %s successfully converted.",
					display_lvname(lv));
		return 1;
	}

	if (lp->replace)
		return lv_raid_replace(lv, lp->force, lp->replace_pvh, lp->pvh);

	if (lp->repair) {
		if (!lv_is_active_exclusive_locally(lv_lock_holder(lv))) {
			log_error("%s must be active %sto perform this operation.",
				  display_lvname(lv),
				  vg_is_clustered(lv->vg) ?
				  "exclusive locally " : "");
			return 0;
		}

		if (seg_is_striped(seg)) {
			log_error("Cannot repair LV %s of type raid0.",
				  display_lvname(lv));
			return 0;
		}

		if (!lv_check_transient(lv)) /* TODO check this in lib for all commands? */
			stack; /* TODO: break here upon fail or always try to fix it? */

		_lvconvert_raid_repair_ask(cmd, lp, &replace);

		if (replace) {
			if (!(failed_pvs = _failed_pv_list(lv->vg)))
				return_0;

			if (!lv_raid_replace(lv, lp->force, failed_pvs, lp->pvh)) {
				log_error("Failed to replace faulty devices in %s.",
					  display_lvname(lv));
				return 0;
			}

			log_print_unless_silent("Faulty devices in %s successfully replaced.",
						display_lvname(lv));
			return 1;
		}

		/* "warn" if policy not set to replace */
		if (arg_is_set(cmd, usepolicies_ARG))
			log_warn("Use 'lvconvert --repair %s' to replace "
				 "failed device.", display_lvname(lv));
		return 1;
	}


try_new_takeover_or_reshape:

	if (!_raid4_conversion_supported(lv, lp))
		return 0;

	/* FIXME This needs changing globally. */
	if (!arg_is_set(cmd, stripes_long_ARG))
		lp->stripes = 0;

	/* Only let raid4 through for now. */
	if (lp->type_str && lp->type_str[0] && lp->segtype != seg->segtype &&
	    ((seg_is_raid4(seg) && seg_is_striped(lp) && lp->stripes > 1) ||
	     (seg_is_striped(seg) && seg->area_count > 1 && seg_is_raid4(lp)))) {
		if (!lv_raid_convert(lv, lp->segtype, lp->yes, lp->force, lp->stripes, lp->stripe_size_supplied, lp->stripe_size,
				     lp->region_size, lp->pvh))
			return_0;

		log_print_unless_silent("Logical volume %s successfully converted.",
					display_lvname(lv));
		return 1;
	}

	log_error("Conversion operation not yet supported.");
	return 0;
}

static int _lvconvert_splitsnapshot(struct cmd_context *cmd, struct logical_volume *cow,
				    struct lvconvert_params *lp)
{
	struct volume_group *vg = cow->vg;
	const char *cow_name = display_lvname(cow);

	if (!lv_is_cow(cow)) {
		log_error("%s is not a snapshot.", cow_name);
		return 0;
	}

	if (lv_is_origin(cow) || lv_is_external_origin(cow)) {
		log_error("Unable to split LV %s that is a snapshot origin.", cow_name);
		return 0;
	}

	if (lv_is_merging_cow(cow)) {
		log_error("Unable to split off snapshot %s being merged into its origin.", cow_name);
		return 0;
	}

	if (lv_is_virtual_origin(origin_from_cow(cow))) {
		log_error("Unable to split off snapshot %s with virtual origin.", cow_name);
		return 0;
	}

	if (lv_is_thin_pool(cow) || lv_is_pool_metadata_spare(cow)) {
		log_error("Unable to split off LV %s needed by thin volume(s).", cow_name);
		return 0;
	}

	if (!(vg->fid->fmt->features & FMT_MDAS)) {
		log_error("Unable to split off snapshot %s using old LVM1-style metadata.", cow_name);
		return 0;
	}

	if (is_lockd_type(vg->lock_type)) {
		/* FIXME: we need to create a lock for the new LV. */
		log_error("Unable to split snapshots in VG with lock_type %s.", vg->lock_type);
		return 0;
	}

	if (!vg_check_status(vg, LVM_WRITE))
		return_0;

	if (lv_is_pvmove(cow) || lv_is_mirror_type(cow) || lv_is_raid_type(cow) || lv_is_thin_type(cow)) {
		log_error("LV %s type is unsupported with --splitsnapshot.", cow_name);
		return 0;
	}

	if (lv_is_active_locally(cow)) {
		if (!lv_check_not_in_use(cow, 1))
			return_0;

		if ((lp->force == PROMPT) && !lp->yes &&
		    lv_is_visible(cow) &&
		    lv_is_active(cow)) {
			if (yes_no_prompt("Do you really want to split off active "
					  "logical volume %s? [y/n]: ", cow_name) == 'n') {
				log_error("Logical volume %s not split.", cow_name);
				return 0;
			}
		}
	}

	if (!archive(vg))
		return_0;

	log_verbose("Splitting snapshot %s from its origin.", cow_name);

	if (!vg_remove_snapshot(cow))
		return_0;

	backup(vg);

	log_print_unless_silent("Logical Volume %s split from its origin.", cow_name);

	return 1;
}


static int _lvconvert_split_cached(struct cmd_context *cmd,
				   struct logical_volume *lv)
{
	struct logical_volume *cache_pool_lv = first_seg(lv)->pool_lv;

	log_debug("Detaching cache pool %s from cached LV %s.",
		  display_lvname(cache_pool_lv), display_lvname(lv));

	if (!archive(lv->vg))
		return_0;

	if (!lv_cache_remove(lv))
		return_0;

	if (!vg_write(lv->vg) || !vg_commit(lv->vg))
		return_0;

	backup(lv->vg);

	log_print_unless_silent("Logical volume %s is not cached and cache pool %s is unused.",
				display_lvname(lv), display_lvname(cache_pool_lv));

	return 1;
}

static int _lvconvert_uncache(struct cmd_context *cmd,
			      struct logical_volume *lv,
			      struct lvconvert_params *lp)
{
	struct lv_segment *seg;
	struct logical_volume *remove_lv;

	if (lv_is_thin_pool(lv))
		lv = seg_lv(first_seg(lv), 0); /* cached _tdata ? */

	if (!lv_is_cache(lv)) {
		log_error("Cannot uncache non-cached logical volume %s.",
			  display_lvname(lv));
		return 0;
	}

	seg = first_seg(lv);

	if (lv_is_partial(seg_lv(seg, 0))) {
		log_warn("WARNING: Cache origin logical volume %s is missing.",
			 display_lvname(seg_lv(seg, 0)));
		remove_lv = lv; /* When origin is missing, drop everything */
	} else
		remove_lv = seg->pool_lv;

	if (lv_is_partial(seg_lv(first_seg(seg->pool_lv), 0)))
		log_warn("WARNING: Cache pool data logical volume %s is missing.",
			 display_lvname(seg_lv(first_seg(seg->pool_lv), 0)));

	if (lv_is_partial(first_seg(seg->pool_lv)->metadata_lv))
		log_warn("WARNING: Cache pool metadata logical volume %s is missing.",
			 display_lvname(first_seg(seg->pool_lv)->metadata_lv));

	/* TODO: Check for failed cache as well to get prompting? */
	if (lv_is_partial(lv)) {
		if (first_seg(seg->pool_lv)->cache_mode != CACHE_MODE_WRITETHROUGH) {
			if (!lp->force) {
				log_error("Conversion aborted.");
				log_error("Cannot uncache writethrough cache volume %s without --force.",
					  display_lvname(lv));
				return 0;
			}
			log_warn("WARNING: Uncaching of partially missing writethrough cache volume %s might destroy your data.",
				 display_lvname(lv));
		}

		if (!lp->yes &&
		    yes_no_prompt("Do you really want to uncache %s with missing LVs? [y/n]: ",
				  display_lvname(lv)) == 'n') {
			log_error("Conversion aborted.");
			return 0;
		}
		cmd->handles_missing_pvs = 1;
		cmd->partial_activation = 1;
	}

	if (lvremove_single(cmd, remove_lv, NULL) != ECMD_PROCESSED)
		return_0;

	if (remove_lv != lv)
		log_print_unless_silent("Logical volume %s is not cached.", display_lvname(lv));

	return 1;
}

static int _lvconvert_snapshot(struct cmd_context *cmd,
			       struct logical_volume *lv,
			       struct lvconvert_params *lp)
{
	struct logical_volume *org;
	const char *snap_name = display_lvname(lv);

	if (lv_is_cache_type(lv)) {
		log_error("Snapshots are not yet supported with cache type LVs %s.",
			  snap_name);
		return 0;
	}

	if (lv_is_mirrored(lv)) {
		log_error("Unable to convert mirrored LV %s into a snapshot.", snap_name);
		return 0;
	}

	if (lv_is_origin(lv)) {
		/* Unsupported stack */
		log_error("Unable to convert origin %s into a snapshot.", snap_name);
		return 0;
	}

	if (lv_is_pool(lv)) {
		log_error("Unable to convert pool LVs %s into a snapshot.", snap_name);
		return 0;
	}

	if (!(org = find_lv(lv->vg, lp->origin_name))) {
		log_error("Couldn't find origin volume %s in Volume group %s.",
			  lp->origin_name, lv->vg->name);
		return 0;
	}

	if (org == lv) {
		log_error("Unable to use %s as both snapshot and origin.", snap_name);
		return 0;
	}

	if (!cow_has_min_chunks(lv->vg, lv->le_count, lp->chunk_size))
		return_0;

	if (lv_is_locked(org) ||
	    lv_is_cache_type(org) ||
	    lv_is_thin_type(org) ||
	    lv_is_pvmove(org) ||
	    lv_is_mirrored(org) ||
	    lv_is_cow(org)) {
		log_error("Unable to convert an LV into a snapshot of a %s LV.",
			  lv_is_locked(org) ? "locked" :
			  lv_is_cache_type(org) ? "cache type" :
			  lv_is_thin_type(org) ? "thin type" :
			  lv_is_pvmove(org) ? "pvmove" :
			  lv_is_mirrored(org) ? "mirrored" :
			  "snapshot");
		return 0;
	}

	log_warn("WARNING: Converting logical volume %s to snapshot exception store.",
		 snap_name);
	log_warn("THIS WILL DESTROY CONTENT OF LOGICAL VOLUME (filesystem etc.)");

	if (!lp->yes &&
	    yes_no_prompt("Do you really want to convert %s? [y/n]: ",
			  snap_name) == 'n') {
		log_error("Conversion aborted.");
		return 0;
	}

	if (!deactivate_lv(cmd, lv)) {
		log_error("Couldn't deactivate logical volume %s.", snap_name);
		return 0;
	}

	if (!lp->zero || !(lv->status & LVM_WRITE))
		log_warn("WARNING: %s not zeroed.", snap_name);
	else {
		lv->status |= LV_TEMPORARY;
		if (!activate_lv_local(cmd, lv) ||
		    !wipe_lv(lv, (struct wipe_params) { .do_zero = 1 })) {
			log_error("Aborting. Failed to wipe snapshot exception store.");
			return 0;
		}
		lv->status &= ~LV_TEMPORARY;
		/* Deactivates cleared metadata LV */
		if (!deactivate_lv_local(lv->vg->cmd, lv)) {
			log_error("Failed to deactivate zeroed snapshot exception store.");
			return 0;
		}
	}

	if (!archive(lv->vg))
		return_0;

	if (!vg_add_snapshot(org, lv, NULL, org->le_count, lp->chunk_size)) {
		log_error("Couldn't create snapshot.");
		return 0;
	}

	/* store vg on disk(s) */
	if (!lv_update_and_reload(org))
		return_0;

	log_print_unless_silent("Logical volume %s converted to snapshot.", snap_name);

	return 1;
}

static int _lvconvert_merge_old_snapshot(struct cmd_context *cmd,
					 struct logical_volume *lv,
					 struct lvconvert_params *lp)
{
	int merge_on_activate = 0;
	struct logical_volume *origin = origin_from_cow(lv);
	struct lv_segment *snap_seg = find_snapshot(lv);
	struct lvinfo info;
	dm_percent_t snap_percent;

	/* Check if merge is possible */
	if (!lv_is_cow(lv)) {
		log_error("\"%s\" is not a mergeable logical volume.",
			  lv->name);
		return 0;
	}

	if (lv_is_merging_cow(lv)) {
		log_error("Snapshot %s is already merging.", lv->name);
		return 0;
	}

	if (lv_is_merging_origin(origin)) {
		log_error("Snapshot %s is already merging into the origin.",
			  find_snapshot(origin)->cow->name);
		return 0;
	}

	if (lv_is_virtual_origin(origin)) {
		log_error("Snapshot %s has virtual origin.", lv->name);
		return 0;
	}

	if (lv_is_external_origin(origin_from_cow(lv))) {
		log_error("Cannot merge snapshot \"%s\" into "
			  "the read-only external origin \"%s\".",
			  lv->name, origin_from_cow(lv)->name);
		return 0;
	}

	/* FIXME: test when snapshot is remotely active */
	if (lv_info(cmd, lv, 0, &info, 1, 0)
	    && info.exists && info.live_table &&
	    (!lv_snapshot_percent(lv, &snap_percent) ||
	     snap_percent == DM_PERCENT_INVALID)) {
		log_error("Unable to merge invalidated snapshot LV \"%s\".",
			  lv->name);
		return 0;
	}

	if (snap_seg->segtype->ops->target_present &&
	    !snap_seg->segtype->ops->target_present(cmd, snap_seg, NULL)) {
		log_error("Can't initialize snapshot merge. "
			  "Missing support in kernel?");
		return 0;
	}

	if (!archive(lv->vg))
		return_0;

	/*
	 * Prevent merge with open device(s) as it would likely lead
	 * to application/filesystem failure.  Merge on origin's next
	 * activation if either the origin or snapshot LV are currently
	 * open.
	 *
	 * FIXME testing open_count is racey; snapshot-merge target's
	 * constructor and DM should prevent appropriate devices from
	 * being open.
	 */
	if (lv_is_active_locally(origin)) {
		if (!lv_check_not_in_use(origin, 0)) {
			log_print_unless_silent("Can't merge until origin volume is closed.");
			merge_on_activate = 1;
		} else if (!lv_check_not_in_use(lv, 0)) {
			log_print_unless_silent("Can't merge until snapshot is closed.");
			merge_on_activate = 1;
		}
	} else if (vg_is_clustered(origin->vg) && lv_is_active(origin)) {
		/* When it's active somewhere else */
		log_print_unless_silent("Can't check whether remotely active snapshot is open.");
		merge_on_activate = 1;
	}

	init_snapshot_merge(snap_seg, origin);

	if (merge_on_activate) {
		/* Store and commit vg but skip starting the merge */
		if (!vg_write(lv->vg) || !vg_commit(lv->vg))
			return_0;
		backup(lv->vg);
	} else {
		/* Perform merge */
		if (!lv_update_and_reload(origin))
			return_0;

		lp->need_polling = 1;
		lp->lv_to_poll = origin;
	}

	if (merge_on_activate)
		log_print_unless_silent("Merging of snapshot %s will occur on "
					"next activation of %s.",
					display_lvname(lv), display_lvname(origin));
	else
		log_print_unless_silent("Merging of volume %s started.",
					display_lvname(lv));

	return 1;
}

static int _lvconvert_merge_thin_snapshot(struct cmd_context *cmd,
					  struct logical_volume *lv,
					  struct lvconvert_params *lp)
{
	int origin_is_active = 0, r = 0;
	struct lv_segment *snap_seg = first_seg(lv);
	struct logical_volume *origin = snap_seg->origin;

	if (!origin) {
		log_error("%s is not a mergeable logical volume.",
			  display_lvname(lv));
		return 0;
	}

	/* Check if merge is possible */
	if (lv_is_merging_origin(origin)) {
		log_error("Snapshot %s is already merging into the origin.",
			  display_lvname(find_snapshot(origin)->lv));
		return 0;
	}

	if (lv_is_external_origin(origin)) {
		if (!(origin = origin_from_cow(lv)))
			log_error(INTERNAL_ERROR "%s is missing origin.",
				  display_lvname(lv));
		else
			log_error("%s is read-only external origin %s.",
				  display_lvname(lv), display_lvname(origin));
		return 0;
	}

	if (lv_is_origin(origin)) {
		log_error("Merging into the old snapshot origin %s is not supported.",
			  display_lvname(origin));
		return 0;
	}

	if (!archive(lv->vg))
		return_0;

	/*
	 * Prevent merge with open device(s) as it would likely lead
	 * to application/filesystem failure.  Merge on origin's next
	 * activation if either the origin or snapshot LV can't be
	 * deactivated.
	 */
	if (!deactivate_lv(cmd, lv))
		log_print_unless_silent("Delaying merge since snapshot is open.");
	else if ((origin_is_active = lv_is_active(origin)) &&
		 !deactivate_lv(cmd, origin))
		log_print_unless_silent("Delaying merge since origin volume is open.");
	else {
		/*
		 * Both thin snapshot and origin are inactive,
		 * replace the origin LV with its snapshot LV.
		 */
		if (!thin_merge_finish(cmd, origin, lv))
			goto_out;

		if (origin_is_active && !activate_lv(cmd, lv)) {
			log_error("Failed to reactivate origin %s.",
				  display_lvname(lv));
			goto out;
		}

		r = 1;
		goto out;
	}

	init_snapshot_merge(snap_seg, origin);

	/* Commit vg, merge will start with next activation */
	if (!vg_write(lv->vg) || !vg_commit(lv->vg))
		return_0;

	r = 1;
out:
	backup(lv->vg);

	if (r)
		log_print_unless_silent("Merging of thin snapshot %s will occur on "
					"next activation of %s.",
					display_lvname(lv), display_lvname(origin));

	return r;
}

static int _lvconvert_thin_pool_repair(struct cmd_context *cmd,
				       struct logical_volume *pool_lv,
				       struct lvconvert_params *lp)
{
	const char *dmdir = dm_dir();
	const char *thin_dump =
		find_config_tree_str_allow_empty(cmd, global_thin_dump_executable_CFG, NULL);
	const char *thin_repair =
		find_config_tree_str_allow_empty(cmd, global_thin_repair_executable_CFG, NULL);
	const struct dm_config_node *cn;
	const struct dm_config_value *cv;
	int ret = 0, status;
	int args = 0;
	const char *argv[19]; /* Max supported 10 args */
	char *dm_name, *trans_id_str;
	char meta_path[PATH_MAX];
	char pms_path[PATH_MAX];
	uint64_t trans_id;
	struct logical_volume *pmslv;
	struct logical_volume *mlv = first_seg(pool_lv)->metadata_lv;
	struct pipe_data pdata;
	FILE *f;

	if (!thin_repair || !thin_repair[0]) {
		log_error("Thin repair commnand is not configured. Repair is disabled.");
		return 0; /* Checking disabled */
	}

	pmslv = pool_lv->vg->pool_metadata_spare_lv;

	/* Check we have pool metadata spare LV */
	if (!handle_pool_metadata_spare(pool_lv->vg, 0, lp->pvh, 1))
		return_0;

	if (pmslv != pool_lv->vg->pool_metadata_spare_lv) {
		if (!vg_write(pool_lv->vg) || !vg_commit(pool_lv->vg))
			return_0;
		pmslv = pool_lv->vg->pool_metadata_spare_lv;
	}

	if (!(dm_name = dm_build_dm_name(cmd->mem, mlv->vg->name,
					 mlv->name, NULL)) ||
	    (dm_snprintf(meta_path, sizeof(meta_path), "%s/%s", dmdir, dm_name) < 0)) {
		log_error("Failed to build thin metadata path.");
		return 0;
	}

	if (!(dm_name = dm_build_dm_name(cmd->mem, pmslv->vg->name,
					 pmslv->name, NULL)) ||
	    (dm_snprintf(pms_path, sizeof(pms_path), "%s/%s", dmdir, dm_name) < 0)) {
		log_error("Failed to build pool metadata spare path.");
		return 0;
	}

	if (!(cn = find_config_tree_array(cmd, global_thin_repair_options_CFG, NULL))) {
		log_error(INTERNAL_ERROR "Unable to find configuration for global/thin_repair_options");
		return 0;
	}

	for (cv = cn->v; cv && args < 16; cv = cv->next) {
		if (cv->type != DM_CFG_STRING) {
			log_error("Invalid string in config file: "
				  "global/thin_repair_options");
			return 0;
		}
		argv[++args] = cv->v.str;
	}

	if (args == 10) {
		log_error("Too many options for thin repair command.");
		return 0;
	}

	argv[0] = thin_repair;
	argv[++args] = "-i";
	argv[++args] = meta_path;
	argv[++args] = "-o";
	argv[++args] = pms_path;
	argv[++args] = NULL;

	if (pool_is_active(pool_lv)) {
		log_error("Only inactive pool can be repaired.");
		return 0;
	}

	if (!activate_lv_local(cmd, pmslv)) {
		log_error("Cannot activate pool metadata spare volume %s.",
			  pmslv->name);
		return 0;
	}

	if (!activate_lv_local(cmd, mlv)) {
		log_error("Cannot activate thin pool metadata volume %s.",
			  mlv->name);
		goto deactivate_pmslv;
	}

	if (!(ret = exec_cmd(cmd, (const char * const *)argv, &status, 1))) {
		log_error("Repair of thin metadata volume of thin pool %s failed (status:%d). "
			  "Manual repair required!",
			  display_lvname(pool_lv), status);
		goto deactivate_mlv;
	}

	if (thin_dump[0]) {
		argv[0] = thin_dump;
		argv[1] = pms_path;
		argv[2] = NULL;

		if (!(f = pipe_open(cmd, argv, 0, &pdata)))
			log_warn("WARNING: Cannot read output from %s %s.", thin_dump, pms_path);
		else {
			/*
			 * Scan only the 1st. line for transation id.
			 * Watch out, if the thin_dump format changes
			 */
			if (fgets(meta_path, sizeof(meta_path), f) &&
			    (trans_id_str = strstr(meta_path, "transaction=\"")) &&
			    (sscanf(trans_id_str + 13, FMTu64, &trans_id) == 1) &&
			    (trans_id != first_seg(pool_lv)->transaction_id) &&
			    ((trans_id - 1) != first_seg(pool_lv)->transaction_id))
				log_error("Transaction id " FMTu64 " from pool \"%s/%s\" "
					  "does not match repaired transaction id "
					  FMTu64 " from %s.",
					  first_seg(pool_lv)->transaction_id,
					  pool_lv->vg->name, pool_lv->name, trans_id,
					  pms_path);

			(void) pipe_close(&pdata); /* killing pipe */
		}
	}

deactivate_mlv:
	if (!deactivate_lv(cmd, mlv)) {
		log_error("Cannot deactivate thin pool metadata volume %s.",
			  mlv->name);
		return 0;
	}

deactivate_pmslv:
	if (!deactivate_lv(cmd, pmslv)) {
		log_error("Cannot deactivate thin pool metadata volume %s.",
			  mlv->name);
		return 0;
	}

	if (!ret)
		return 0;

	if (pmslv == pool_lv->vg->pool_metadata_spare_lv) {
		pool_lv->vg->pool_metadata_spare_lv = NULL;
		pmslv->status &= ~POOL_METADATA_SPARE;
		lv_set_visible(pmslv);
	}

	/* Try to allocate new pool metadata spare LV */
	if (!handle_pool_metadata_spare(pool_lv->vg, 0, lp->pvh,
					lp->poolmetadataspare))
		stack;

	if (dm_snprintf(meta_path, sizeof(meta_path), "%s_meta%%d", pool_lv->name) < 0) {
		log_error("Can't prepare new metadata name for %s.", pool_lv->name);
		return 0;
	}

	if (!generate_lv_name(pool_lv->vg, meta_path, pms_path, sizeof(pms_path))) {
		log_error("Can't generate new name for %s.", meta_path);
		return 0;
	}

	if (!detach_pool_metadata_lv(first_seg(pool_lv), &mlv))
		return_0;

	/* Swap _pmspare and _tmeta name */
	if (!swap_lv_identifiers(cmd, mlv, pmslv))
		return_0;

	if (!attach_pool_metadata_lv(first_seg(pool_lv), pmslv))
		return_0;

	/* Used _tmeta (now _pmspare) becomes _meta%d */
	if (!lv_rename_update(cmd, mlv, pms_path, 0))
		return_0;

	if (!vg_write(pool_lv->vg) || !vg_commit(pool_lv->vg))
		return_0;

	log_warn("WARNING: If everything works, remove %s volume.",
		 display_lvname(mlv));

	log_warn("WARNING: Use pvmove command to move %s on the best fitting PV.",
		 display_lvname(first_seg(pool_lv)->metadata_lv));

	return 1;
}

/* Currently converts only to thin volume with external origin */
static int _lvconvert_thin(struct cmd_context *cmd,
			   struct logical_volume *lv,
			   struct lvconvert_params *lp)
{
	struct logical_volume *torigin_lv, *pool_lv = lp->pool_data_lv;
	struct volume_group *vg = lv->vg;
	struct lvcreate_params lvc = {
		.activate = CHANGE_AEY,
		.alloc = ALLOC_INHERIT,
		.lv_name = lp->origin_name,
		.major = -1,
		.minor = -1,
		.suppress_zero_warn = 1, /* Suppress warning for this thin */
		.permission = LVM_READ,
		.pool_name = pool_lv->name,
		.pvh = &vg->pvs,
		.read_ahead = DM_READ_AHEAD_AUTO,
		.stripes = 1,
		.virtual_extents = lv->le_count,
	};

	if (lv == pool_lv) {
		log_error("Can't use same LV %s for thin pool and thin volume.",
			  display_lvname(pool_lv));
		return 0;
	}

	if (lv_is_locked(lv) ||
	    !lv_is_visible(lv) ||
	    lv_is_cache_type(lv) ||
	    lv_is_cow(lv) ||
	    lv_is_pool(lv) ||
	    lv_is_pool_data(lv) ||
	    lv_is_pool_metadata(lv)) {
		log_error("Can't use%s%s %s %s as external origin.",
			  lv_is_locked(lv) ? " locked" : "",
			  lv_is_visible(lv) ? "" : " hidden",
			  lvseg_name(first_seg(lv)),
			  display_lvname(lv));
		return 0;
	}

	if (is_lockd_type(lv->vg->lock_type)) {
		/*
		 * FIXME: external origins don't work in lockd VGs.
		 * Prior to the lvconvert, there's a lock associated with
		 * the uuid of the external origin LV.  After the convert,
		 * that uuid belongs to the new thin LV, and a new LV with
		 * a new uuid exists as the non-thin, readonly external LV.
		 * We'd need to remove the lock for the previous uuid
		 * (the new thin LV will have no lock), and create a new
		 * lock for the new LV uuid used by the external LV.
		 */
		log_error("Can't use lock_type %s LV as external origin.",
			  lv->vg->lock_type);
		return 0;
	}

	dm_list_init(&lvc.tags);

	if (!pool_supports_external_origin(first_seg(pool_lv), lv))
		return_0;

	if (!(lvc.segtype = get_segtype_from_string(cmd, SEG_TYPE_NAME_THIN)))
		return_0;

	if (!archive(vg))
		return_0;

	/* New thin LV needs to be created (all messages sent to pool)
	 * In this case thin volume is created READ-ONLY and
	 * also warn about not zeroing is suppressed. */
	if (!(torigin_lv = lv_create_single(vg, &lvc)))
		return_0;

	/* Deactivate prepared Thin LV */
	if (!deactivate_lv(cmd, torigin_lv)) {
		log_error("Aborting. Unable to deactivate new LV. "
			  "Manual intervention required.");
		return 0;
	}

	/*
	 * Crashing till this point will leave plain thin volume
	 * which could be easily removed by the user after i.e. power-off
	 */

	if (!swap_lv_identifiers(cmd, torigin_lv, lv)) {
		stack;
		goto revert_new_lv;
	}

	/* Preserve read-write status of original LV here */
	torigin_lv->status |= (lv->status & LVM_WRITE);

	if (!attach_thin_external_origin(first_seg(torigin_lv), lv)) {
		stack;
		goto revert_new_lv;
	}

	if (!lv_update_and_reload(torigin_lv)) {
		stack;
		goto deactivate_and_revert_new_lv;
	}

	log_print_unless_silent("Converted %s to thin volume with "
				"external origin %s.",
				display_lvname(torigin_lv),
				display_lvname(lv));

	return 1;

deactivate_and_revert_new_lv:
	if (!swap_lv_identifiers(cmd, torigin_lv, lv))
		stack;

	if (!deactivate_lv(cmd, torigin_lv)) {
		log_error("Unable to deactivate failed new LV. "
			  "Manual intervention required.");
		return 0;
	}

	if (!detach_thin_external_origin(first_seg(torigin_lv)))
		return_0;

revert_new_lv:
	/* FIXME Better to revert to backup of metadata? */
	if (!lv_remove(torigin_lv) || !vg_write(vg) || !vg_commit(vg))
		log_error("Manual intervention may be required to remove "
			  "abandoned LV(s) before retrying.");
	else
		backup(vg);

	return 0;
}

static int _lvconvert_update_pool_params(struct logical_volume *pool_lv,
					 struct lvconvert_params *lp)
{
	if (lp->pool_metadata_size &&
	    !(lp->pool_metadata_extents =
	      extents_from_size(pool_lv->vg->cmd, lp->pool_metadata_size, pool_lv->vg->extent_size)))
		return_0;

	return update_pool_params(lp->segtype,
				  pool_lv->vg,
				  lp->target_attr,
				  lp->passed_args,
				  pool_lv->le_count,
				  &lp->pool_metadata_extents,
				  &lp->thin_chunk_size_calc_policy,
				  &lp->chunk_size,
				  &lp->discards,
				  &lp->zero);
}

/*
 * Converts a data lv and a metadata lv into a thin or cache pool lv.
 *
 * Thin lvconvert version which
 *  rename metadata
 *  convert/layers thinpool over data
 *  attach metadata
 *
 * pool_lv might or might not already be a pool.
 */
static int _lvconvert_pool(struct cmd_context *cmd,
			   struct logical_volume *pool_lv,
			   struct lvconvert_params *lp)
{
	int r = 0;
	const char *old_name;
	struct lv_segment *seg;
	struct volume_group *vg = pool_lv->vg;
	struct logical_volume *data_lv;
	struct logical_volume *metadata_lv = NULL;
	struct logical_volume *pool_metadata_lv;
	char *lockd_data_args = NULL;
	char *lockd_meta_args = NULL;
	char *lockd_data_name = NULL;
	char *lockd_meta_name = NULL;
	struct id lockd_data_id;
	struct id lockd_meta_id;
	char metadata_name[NAME_LEN], data_name[NAME_LEN];
	int zero_metadata = 1;
	int activate_pool;

	if (lp->pool_data_name) {
		if ((lp->thin || lp->cache) &&
		    !strcmp(lp->pool_data_name, pool_lv->name)) {
			log_error("Converted volume %s and pool volume must differ.",
				  display_lvname(pool_lv));
			return 0;
		}
		if (!(pool_lv = find_lv(vg, lp->pool_data_name))) {
			log_error("Unknown pool data LV %s.", lp->pool_data_name);
			return 0;
		}
	}

	/* An existing LV needs to have its lock freed once it becomes a data LV. */
	if (is_lockd_type(vg->lock_type) && !lv_is_pool(pool_lv) && pool_lv->lock_args) {
		lockd_data_args = dm_pool_strdup(cmd->mem, pool_lv->lock_args);
		lockd_data_name = dm_pool_strdup(cmd->mem, pool_lv->name);
		memcpy(&lockd_data_id, &pool_lv->lvid.id[1], sizeof(struct id));
	}

	if (!lv_is_visible(pool_lv)) {
		log_error("Can't convert internal LV %s.", display_lvname(pool_lv));
		return 0;
	}

	if (lv_is_locked(pool_lv)) {
		log_error("Can't convert locked LV %s.", display_lvname(pool_lv));
		return 0;
	}

	if (lv_is_thin_pool(pool_lv) && (segtype_is_cache_pool(lp->segtype) || lp->cache)) {
		log_error("Can't convert thin pool LV %s.", display_lvname(pool_lv));
		return 0;
	}

	if (lv_is_cache(pool_lv) && !segtype_is_thin_pool(lp->segtype)) {
		log_error("Cached LV %s could be only converted into a thin pool volume.",
			  display_lvname(pool_lv));
		return 0;
	}

	if (lv_is_cache_pool(pool_lv) && (segtype_is_thin_pool(lp->segtype) || lp->thin)) {
		log_error("Cannot convert cache pool %s as pool data volume.",
			  display_lvname(pool_lv));
		return 0;
	}

	if (lv_is_mirror(pool_lv)) {
		log_error("Mirror logical volumes cannot be used as pools.");
		log_print_unless_silent("Try \"%s\" segment type instead.", SEG_TYPE_NAME_RAID1);
		return 0;
	}

	/*
	 * Only linear, striped and raid supported.
	 * FIXME Tidy up all these type restrictions.
	 */
	if (!lv_is_pool(pool_lv) &&
	    (lv_is_thin_type(pool_lv) ||
	     lv_is_cow(pool_lv) || lv_is_merging_cow(pool_lv) ||
	     lv_is_origin(pool_lv) ||lv_is_merging_origin(pool_lv) ||
	     lv_is_external_origin(pool_lv) ||
	     lv_is_virtual(pool_lv))) {
		log_error("Pool data LV %s is of an unsupported type.", display_lvname(pool_lv));
		return 0;
	}

	if (lp->pool_metadata_name) {
		if (!(lp->pool_metadata_lv = find_lv(vg, lp->pool_metadata_name))) {
			log_error("Unknown pool metadata LV %s.", lp->pool_metadata_name);
			return 0;
		}
		lp->pool_metadata_extents = lp->pool_metadata_lv->le_count;
		metadata_lv = lp->pool_metadata_lv;

		/* An existing LV needs to have its lock freed once it becomes a meta LV. */
		if (is_lockd_type(vg->lock_type) && metadata_lv->lock_args) {
			lockd_meta_args = dm_pool_strdup(cmd->mem, metadata_lv->lock_args);
			lockd_meta_name = dm_pool_strdup(cmd->mem, metadata_lv->name);
			memcpy(&lockd_meta_id, &metadata_lv->lvid.id[1], sizeof(struct id));
		}

		if (metadata_lv == pool_lv) {
			log_error("Can't use same LV for pool data and metadata LV %s.",
				  display_lvname(metadata_lv));
			return 0;
		}

		if (!lv_is_visible(metadata_lv)) {
			log_error("Can't convert internal LV %s.",
				  display_lvname(metadata_lv));
			return 0;
		}

		if (lv_is_locked(metadata_lv)) {
			log_error("Can't convert locked LV %s.",
				  display_lvname(metadata_lv));
			return 0;
		}

		if (lv_is_mirror(metadata_lv)) {
			log_error("Mirror logical volumes cannot be used for pool metadata.");
			log_print_unless_silent("Try \"%s\" segment type instead.", SEG_TYPE_NAME_RAID1);
			return 0;
		}

		/* FIXME Tidy up all these type restrictions. */
		if (lv_is_cache_type(metadata_lv) ||
		    lv_is_thin_type(metadata_lv) ||
		    lv_is_cow(metadata_lv) || lv_is_merging_cow(metadata_lv) ||
		    lv_is_origin(metadata_lv) || lv_is_merging_origin(metadata_lv) ||
		    lv_is_external_origin(metadata_lv) ||
		    lv_is_virtual(metadata_lv)) {
			log_error("Pool metadata LV %s is of an unsupported type.",
				  display_lvname(metadata_lv));
			return 0;
		}

		if (!lv_is_pool(pool_lv)) {
			if (!_lvconvert_update_pool_params(pool_lv, lp))
				return_0;

			if (lp->pool_metadata_extents > metadata_lv->le_count) {
				log_error("Logical volume %s is too small for metadata.",
					  display_lvname(metadata_lv));
				return 0;
			}
		}
	}

	if (lv_is_pool(pool_lv)) {
		lp->pool_data_lv = pool_lv;

		if (!metadata_lv) {
			if (arg_from_list_is_set(cmd, "is invalid with existing pool",
						 discards_ARG,
						 poolmetadatasize_ARG, -1))
				return_0;

			if (lp->thin &&
			    arg_from_list_is_set(cmd, "is invalid with existing thin pool",
						 chunksize_ARG, zero_ARG, -1))
				return_0;

			if (lp->cache) {
				if (!lp->chunk_size)
					lp->chunk_size = first_seg(pool_lv)->chunk_size;

				if (!validate_lv_cache_chunk_size(pool_lv, lp->chunk_size))
					return_0;

				/* Check is user requested zeroing logic via [-Z y|n] */
				if (!arg_is_set(cmd, zero_ARG)) {
					/* Note: requires rather deep know-how to skip zeroing */
					if (!lp->yes &&
					    yes_no_prompt("Do you want wipe existing metadata of "
							  "cache pool volume %s? [y/n]: ",
							  display_lvname(pool_lv)) == 'n') {
						log_error("Conversion aborted.");
						log_error("To preserve cache metadata add option \"--zero n\".");
						log_warn("WARNING: Reusing mismatched cache pool metadata "
							 "MAY DESTROY YOUR DATA!");
						return 0;
					}
					/* Wiping confirmed, go ahead */
					if (!wipe_cache_pool(pool_lv))
						return_0;
				} else if (arg_int_value(cmd, zero_ARG, 0)) {
					if (!wipe_cache_pool(pool_lv)) /* Wipe according to -Z y|n */
						return_0;
				} else
					log_warn("WARNING: Reusing cache pool metadata %s "
						 "for volume caching.", display_lvname(pool_lv));
			}

			if (lp->thin || lp->cache)
				/* already pool, can continue converting volume */
				return 1;

			log_error("LV %s is already pool.", display_lvname(pool_lv));
			return 0;
		}

		if (lp->thin || lp->cache) {
			log_error("--%s and pool metadata swap is not supported.",
				  lp->thin ? "thin" : "cache");
			return 0;
		}

		/* FIXME cache pool */
		if (lv_is_thin_pool(pool_lv) && pool_is_active(pool_lv)) {
			/* If any volume referencing pool active - abort here */
			log_error("Cannot convert pool %s with active volumes.",
				  display_lvname(pool_lv));
			return 0;
		}

		lp->passed_args |= PASS_ARG_CHUNK_SIZE | PASS_ARG_DISCARDS | PASS_ARG_ZERO;
		seg = first_seg(pool_lv);

		/* Normally do NOT change chunk size when swapping */
		if (arg_is_set(cmd, chunksize_ARG) &&
		    (lp->chunk_size != seg->chunk_size) &&
		    !dm_list_empty(&pool_lv->segs_using_this_lv)) {
			if (lp->force == PROMPT) {
				log_error("Chunk size can be only changed with --force. Conversion aborted.");
				return 0;
			}
			log_warn("WARNING: Changing chunk size %s to "
				 "%s for %s pool volume.",
				 display_size(cmd, seg->chunk_size),
				 display_size(cmd, lp->chunk_size),
				 display_lvname(pool_lv));
			/* Ok, user has likely some serious reason for this */
			if (!lp->yes &&
			    yes_no_prompt("Do you really want to change chunk size "
					  "for %s pool volume? [y/n]: ",
					  display_lvname(pool_lv)) == 'n') {
				log_error("Conversion aborted.");
				return 0;
			}
		} else
			lp->chunk_size = seg->chunk_size;

		if (!_lvconvert_update_pool_params(pool_lv, lp))
			return_0;

		if (metadata_lv->le_count < lp->pool_metadata_extents)
			log_print_unless_silent("Continuing with swap...");

		if (!arg_is_set(cmd, discards_ARG))
			lp->discards = seg->discards;
		if (!arg_is_set(cmd, zero_ARG))
			lp->zero = seg->zero_new_blocks;

		if (!lp->yes &&
		    yes_no_prompt("Do you want to swap metadata of %s "
				  "pool with metadata volume %s? [y/n]: ",
				  display_lvname(pool_lv),
				  display_lvname(metadata_lv)) == 'n') {
			log_error("Conversion aborted.");
			return 0;
		}
	} else {
		/* Only cache pool conversion may suppress metadata zeroing
		 * TODO: Maybe similar support could be useful for thin-pool, but --zero
		 * is already overloade and we would also need to possibly match transaction Id. */
		if (segtype_is_cache_pool(lp->segtype) && metadata_lv)
			/* Check is user requested zeroing logic via [-Z y|n] (default is yes) */
			zero_metadata = arg_int_value(cmd, zero_ARG, 1);

		log_warn("WARNING: Converting logical volume %s%s%s to %s pool's data%s %s metadata wiping.",
			 display_lvname(pool_lv),
			 metadata_lv ? " and " : "",
			 metadata_lv ? display_lvname(metadata_lv) : "",
			 segtype_is_cache_pool(lp->segtype) ? "cache" : "thin",
			 metadata_lv ? " and metadata volumes" : " volume",
			 zero_metadata ? "with" : "WITHOUT");

		if (zero_metadata)
			log_warn("THIS WILL DESTROY CONTENT OF LOGICAL VOLUME (filesystem etc.)");
		else /* ATM supported only for cache pools */
			log_warn("WARNING: Using mismatched cache pool metadata "
				 "MAY DESTROY YOUR DATA!");

		if (!lp->yes &&
		    yes_no_prompt("Do you really want to convert %s%s%s? [y/n]: ",
				  display_lvname(pool_lv),
				  metadata_lv ? " and " : "",
				  metadata_lv ? display_lvname(metadata_lv) : "") == 'n') {
			log_error("Conversion aborted.");
			return 0;
		}
	}

	if (segtype_is_cache_pool(lp->segtype))
		activate_pool = 0; /* Cannot activate cache pool */
	else
		/* Allow to have only thinpool active and restore it's active state */
		activate_pool = lv_is_active(pool_lv);

	if ((dm_snprintf(metadata_name, sizeof(metadata_name), "%s%s",
			 pool_lv->name,
			 (segtype_is_cache_pool(lp->segtype)) ?
			  "_cmeta" : "_tmeta") < 0) ||
	    (dm_snprintf(data_name, sizeof(data_name), "%s%s",
			 pool_lv->name,
			 (segtype_is_cache_pool(lp->segtype)) ?
			 "_cdata" : "_tdata") < 0)) {
		log_error("Failed to create internal lv names, "
			  "pool name is too long.");
		return 0;
	}

	if (!metadata_lv) {
		if (!_lvconvert_update_pool_params(pool_lv, lp))
			return_0;

		if (!get_stripe_params(cmd, get_segtype_from_string(cmd, SEG_TYPE_NAME_STRIPED),
				       &lp->stripes, &lp->stripe_size, &lp->stripes_supplied, &lp->stripe_size_supplied))
			return_0;

		if (!archive(vg))
			return_0;

		if (!(metadata_lv = alloc_pool_metadata(pool_lv, metadata_name,
							lp->read_ahead, lp->stripes,
							lp->stripe_size,
							lp->pool_metadata_extents,
							lp->alloc, lp->pvh)))
			return_0;
	} else {
		if (!deactivate_lv(cmd, metadata_lv)) {
			log_error("Aborting. Failed to deactivate %s.",
				  display_lvname(metadata_lv));
			return 0;
		}

		if (!archive(vg))
			return_0;

		/* Swap normal LV with pool's metadata LV ? */
		if (lv_is_pool(pool_lv)) {
			/* Swap names between old and new metadata LV */
			seg = first_seg(pool_lv);
			if (!detach_pool_metadata_lv(seg, &pool_metadata_lv))
				return_0;
			old_name = metadata_lv->name;
			if (!lv_rename_update(cmd, metadata_lv, "pvmove_tmeta", 0))
				return_0;
			if (!lv_rename_update(cmd, pool_metadata_lv, old_name, 0))
				return_0;

			goto mda_write;
		}

		if (zero_metadata) {
			metadata_lv->status |= LV_TEMPORARY;
			if (!activate_lv_local(cmd, metadata_lv)) {
				log_error("Aborting. Failed to activate metadata lv.");
				return 0;
			}

			if (!wipe_lv(metadata_lv, (struct wipe_params) { .do_zero = 1 })) {
				log_error("Aborting. Failed to wipe metadata lv.");
				return 0;
			}
		}
	}

	/* We are changing target type, so deactivate first */
	if (!deactivate_lv(cmd, metadata_lv)) {
		log_error("Aborting. Failed to deactivate metadata lv. "
			  "Manual intervention required.");
		return 0;
	}

	if (!deactivate_lv(cmd, pool_lv)) {
		log_error("Aborting. Failed to deactivate logical volume %s.",
			  display_lvname(pool_lv));
		return 0;
	}

	data_lv = pool_lv;
	old_name = data_lv->name; /* Use for pool name */
	/*
	 * Since we wish to have underlaying devs to match _[ct]data
	 * rename data LV to match pool LV subtree first,
	 * also checks for visible LV.
	 */
	/* FIXME: any more types prohibited here? */
	if (!lv_rename_update(cmd, data_lv, data_name, 0))
		return_0;

	if (!(pool_lv = lv_create_empty(old_name, NULL,
					((segtype_is_cache_pool(lp->segtype)) ?
					 CACHE_POOL : THIN_POOL) |
					VISIBLE_LV | LVM_READ | LVM_WRITE,
					ALLOC_INHERIT, vg))) {
		log_error("Creation of pool LV failed.");
		return 0;
	}

	/* Allocate a new pool segment */
	if (!(seg = alloc_lv_segment(lp->segtype, pool_lv, 0, data_lv->le_count,
				     pool_lv->status, 0, NULL, 1,
				     data_lv->le_count, 0, 0, 0, NULL)))
		return_0;

	/* Add the new segment to the layer LV */
	dm_list_add(&pool_lv->segments, &seg->list);
	pool_lv->le_count = data_lv->le_count;
	pool_lv->size = data_lv->size;

	if (!attach_pool_data_lv(seg, data_lv))
		return_0;

	/*
	 * Create a new lock for a thin pool LV.  A cache pool LV has no lock.
	 * Locks are removed from existing LVs that are being converted to
	 * data and meta LVs (they are unlocked and deleted below.)
	 */
	if (is_lockd_type(vg->lock_type)) {
		if (segtype_is_cache_pool(lp->segtype)) {
			data_lv->lock_args = NULL;
			metadata_lv->lock_args = NULL;
		} else {
			data_lv->lock_args = NULL;
			metadata_lv->lock_args = NULL;

			if (!strcmp(vg->lock_type, "sanlock"))
				pool_lv->lock_args = "pending";
			else if (!strcmp(vg->lock_type, "dlm"))
				pool_lv->lock_args = "dlm";
			/* The lock_args will be set in vg_write(). */
		}
	}

	/* FIXME: revert renamed LVs in fail path? */
	/* FIXME: any common code with metadata/thin_manip.c  extend_pool() ? */

	seg->transaction_id = 0;

mda_write:
	seg->chunk_size = lp->chunk_size;
	seg->discards = lp->discards;
	seg->zero_new_blocks = lp->zero ? 1 : 0;

	if (lp->cache_mode &&
	    !cache_set_cache_mode(seg, lp->cache_mode))
		return_0;

	if ((lp->policy_name || lp->policy_settings) &&
	    !cache_set_policy(seg, lp->policy_name, lp->policy_settings))
		return_0;

	/* Rename deactivated metadata LV to have _tmeta suffix */
	/* Implicit checks if metadata_lv is visible */
	if (lp->pool_metadata_name &&
	    !lv_rename_update(cmd, metadata_lv, metadata_name, 0))
		return_0;

	if (!attach_pool_metadata_lv(seg, metadata_lv))
		return_0;

	if (!handle_pool_metadata_spare(vg, metadata_lv->le_count,
					lp->pvh, lp->poolmetadataspare))
		return_0;

	if (!vg_write(vg) || !vg_commit(vg))
		return_0;

	if (seg->zero_new_blocks &&
	    seg->chunk_size  >= DEFAULT_THIN_POOL_CHUNK_SIZE_PERFORMANCE * 2)
		log_warn("WARNING: Pool zeroing and large %s chunk size slows down "
			 "provisioning.", display_size(cmd, seg->chunk_size));

	if (activate_pool && !lockd_lv(cmd, pool_lv, "ex", LDLV_PERSISTENT)) {
		log_error("Failed to lock pool LV %s.", display_lvname(pool_lv));
		goto out;
	}

	if (activate_pool &&
	    !activate_lv_excl(cmd, pool_lv)) {
		log_error("Failed to activate pool logical volume %s.",
			  display_lvname(pool_lv));
		/* Deactivate subvolumes */
		if (!deactivate_lv(cmd, seg_lv(seg, 0)))
			log_error("Failed to deactivate pool data logical volume %s.",
				  display_lvname(seg_lv(seg, 0)));
		if (!deactivate_lv(cmd, seg->metadata_lv))
			log_error("Failed to deactivate pool metadata logical volume %s.",
				  display_lvname(seg->metadata_lv));
		goto out;
	}

	r = 1;
	lp->pool_data_lv = pool_lv;

out:
	backup(vg);

	if (r)
		log_print_unless_silent("Converted %s to %s pool.",
					display_lvname(pool_lv),
					(segtype_is_cache_pool(lp->segtype)) ?
					"cache" : "thin");

	/*
	 * Unlock and free the locks from existing LVs that became pool data
	 * and meta LVs.
	 */
	if (lockd_data_name) {
		if (!lockd_lv_name(cmd, vg, lockd_data_name, &lockd_data_id, lockd_data_args, "un", LDLV_PERSISTENT))
			log_error("Failed to unlock pool data LV %s/%s", vg->name, lockd_data_name);
		lockd_free_lv(cmd, vg, lockd_data_name, &lockd_data_id, lockd_data_args);
	}

	if (lockd_meta_name) {
		if (!lockd_lv_name(cmd, vg, lockd_meta_name, &lockd_meta_id, lockd_meta_args, "un", LDLV_PERSISTENT))
			log_error("Failed to unlock pool metadata LV %s/%s", vg->name, lockd_meta_name);
		lockd_free_lv(cmd, vg, lockd_meta_name, &lockd_meta_id, lockd_meta_args);
	}

	return r;
#if 0
revert_new_lv:
	/* TBD */
	if (!lp->pool_metadata_lv_name) {
		if (!deactivate_lv(cmd, metadata_lv)) {
			log_error("Failed to deactivate metadata lv.");
			return 0;
		}
		if (!lv_remove(metadata_lv) || !vg_write(vg) || !vg_commit(vg))
			log_error("Manual intervention may be required to remove "
				  "abandoned LV(s) before retrying.");
		else
			backup(vg);
	}

	return 0;
#endif
}

/*
 * Convert origin into a cache LV by attaching a cache pool.
 */
static int _lvconvert_cache(struct cmd_context *cmd,
			    struct logical_volume *origin_lv,
			    struct lvconvert_params *lp)
{
	struct logical_volume *pool_lv = lp->pool_data_lv;
	struct logical_volume *cache_lv;

	if (!validate_lv_cache_create_pool(pool_lv))
		return_0;

	if (!archive(origin_lv->vg))
		return_0;

	if (!(cache_lv = lv_cache_create(pool_lv, origin_lv)))
		return_0;

	if (!cache_set_cache_mode(first_seg(cache_lv), lp->cache_mode))
		return_0;

	if (!cache_set_policy(first_seg(cache_lv), lp->policy_name, lp->policy_settings))
		return_0;

	cache_check_for_warns(first_seg(cache_lv));

	if (!lv_update_and_reload(cache_lv))
		return_0;

	log_print_unless_silent("Logical volume %s is now cached.",
				display_lvname(cache_lv));

	return 1;
}

/*
 * Functions called to perform a specific operation on a specific LV type.
 *
 * _convert_<lvtype>_<operation>
 *
 * For cases where an operation does not apply to the LV itself, but
 * is implicitly redirected to a sub-LV, these functions locate the
 * correct sub-LV and call the operation on that sub-LV.  If a sub-LV
 * of the proper type is not found, these functions report the error.
 *
 * FIXME: the _lvconvert_foo() functions can be cleaned up since they
 * are now only called for valid combinations of LV type and operation.
 * After that happens, the code remaining in those functions can be
 * moved into the _convert_lvtype_operation() functions below.
 */

/*
 * Separate a COW snapshot LV from its origin.
 * lvconvert --splitsnapshot LV
 */
static int _convert_cow_snapshot_splitsnapshot(struct cmd_context *cmd, struct logical_volume *lv,
					       struct lvconvert_params *lp)
{
	return _lvconvert_splitsnapshot(cmd, lv, lp);
}

/*
 * Merge a COW snapshot LV into its origin.
 * lvconvert --merge LV
 */
static int _convert_cow_snapshot_merge(struct cmd_context *cmd, struct logical_volume *lv,
				       struct lvconvert_params *lp)
{
	return _lvconvert_merge_old_snapshot(cmd, lv, lp);
}

/*
 * Merge a snapshot thin LV into its origin.
 * lvconvert --merge LV
 */

static int _convert_thin_volume_merge(struct cmd_context *cmd, struct logical_volume *lv,
				      struct lvconvert_params *lp)
{
	return _lvconvert_merge_thin_snapshot(cmd, lv, lp);
}

/*
 * Split and preserve a cache pool from the data portion of a thin pool LV.
 * lvconvert --splitcache LV
 */
static int _convert_thin_pool_splitcache(struct cmd_context *cmd, struct logical_volume *lv,
					 struct lvconvert_params *lp)
{
	struct logical_volume *sublv1;

	sublv1 = seg_lv(first_seg(lv), 0); /* cached _tdata ? */

	if (!lv_is_cache(sublv1)) {
		log_error("Sub LV %s must be cache.", display_lvname(sublv1));
		return 0;
	}

	return _lvconvert_split_cached(cmd, sublv1);
}

/*
 * Split and remove a cache pool from the data portion of a thin pool LV.
 * lvconvert --uncache LV
 */
static int _convert_thin_pool_uncache(struct cmd_context *cmd, struct logical_volume *lv,
				      struct lvconvert_params *lp)
{
	struct logical_volume *sublv1 = NULL;

	sublv1 = seg_lv(first_seg(lv), 0); /* cached _tdata ? */

	if (!lv_is_cache(sublv1)) {
		log_error("Sub LV %s must be cache.", display_lvname(sublv1));
		return 0;
	}

	return _lvconvert_uncache(cmd, sublv1, lp);
}

/*
 * Repair a thin pool LV.
 * lvconvert --repair LV
 */
static int _convert_thin_pool_repair(struct cmd_context *cmd, struct logical_volume *lv,
				     struct lvconvert_params *lp)
{
	return _lvconvert_thin_pool_repair(cmd, lv, lp);
}

/*
 * Convert the data portion of a thin pool LV to a cache LV.
 * lvconvert --type cache LV
 *
 * Required options:
 * --cachepool LV
 *
 * Auxiliary operation:
 * Converts the --cachepool arg to a cache pool if it is not already.
 *
 * Alternate syntax:
 * lvconvert --cache LV
 */
static int _convert_thin_pool_cache(struct cmd_context *cmd, struct logical_volume *lv,
				    struct lvconvert_params *lp)
{
	/* lvconvert --type cache includes an implicit conversion of the cachepool arg to type cache-pool. */
	if (!_lvconvert_pool(cmd, lv, lp)) {
		log_error("Implicit conversion of --cachepool arg to type cache-pool failed.");
		return 0;
	}

	/* Do we need to grab the tdata sub LV to pass on? */

	return _lvconvert_cache(cmd, lv, lp);
}

/*
 * Replace the metadata LV in a thin pool LV.
 * lvconvert --poolmetadata NewLV --thinpool LV
 * FIXME: this will change so --swap-poolmetadata defines the operation.
 * FIXME: should be lvconvert --swap-poolmetadata NewLV LV
 */
static int _convert_thin_pool_swapmetadata(struct cmd_context *cmd, struct logical_volume *lv,
					   struct lvconvert_params *lp)
{
	return _lvconvert_pool(cmd, lv, lp);
}

/*
 * Split and preserve a cache pool from a cache LV.
 * lvconvert --splitcache LV
 */
static int _convert_cache_volume_splitcache(struct cmd_context *cmd, struct logical_volume *lv,
					    struct lvconvert_params *lp)
{
	return _lvconvert_split_cached(cmd, lv);
}

/*
 * Split and remove a cache pool from a cache LV.
 * lvconvert --uncache LV
 */
static int _convert_cache_volume_uncache(struct cmd_context *cmd, struct logical_volume *lv,
					 struct lvconvert_params *lp)
{
	return _lvconvert_uncache(cmd, lv, lp);
}

/*
 * Split images from the raid1|mirror origin of a cache LV and use them to create a new LV.
 * lvconvert --splitmirrors Number LV
 *
 * Required options:
 * --trackchanges | --name Name
 */
static int _convert_cache_volume_splitmirrors(struct cmd_context *cmd, struct logical_volume *lv,
					     struct lvconvert_params *lp)
{
	struct logical_volume *sublv1;

	sublv1 = seg_lv(first_seg(lv), 0);

	if (lv_is_raid(sublv1))
		return _lvconvert_raid(sublv1, lp);

	if (lv_is_mirror(sublv1))
		return _lvconvert_mirrors(cmd, lv, lp);

	log_error("Sub LV %s must be raid or mirror.", display_lvname(sublv1));
	return 0;
}

/*
 * Convert a cache LV to a thin pool (using the cache LV for thin pool data).
 * lvconvert --type thin-pool LV
 *
 * Alternate syntax:
 * This is equivalent to above, but not preferred because it's ambiguous and inconsistent.
 * lvconvert --thinpool LV
 */
static int _convert_cache_volume_thin_pool(struct cmd_context *cmd, struct logical_volume *lv,
					   struct lvconvert_params *lp)
{
	return _lvconvert_pool(cmd, lv, lp);
}

/*
 * Split a cache volume from a cache pool LV.
 * lvconvert --splitcache LV
 */
static int _convert_cache_pool_splitcache(struct cmd_context *cmd, struct logical_volume *lv,
					  struct lvconvert_params *lp)
{
	struct logical_volume *sublv1;
	struct lv_segment *seg;

	/* When passed used cache-pool of used cached LV -> split cached LV */

	if ((dm_list_size(&lv->segs_using_this_lv) == 1) &&
	    (seg = get_only_segment_using_this_lv(lv)) &&
	    seg_is_cache(seg))
		sublv1 = seg->lv;
	else {
		log_error("Sub LV of cache type not found.");
		return 0;
	}

	if (!lv_is_cache(sublv1)) {
		log_error("Sub LV %s must be cache.", display_lvname(sublv1));
		return 0;
	}

	return _lvconvert_split_cached(cmd, sublv1);
}

/*
 * Replace the metadata LV in a cache pool LV.
 * lvconvert --poolmetadata NewLV --cachepool LV
 * FIXME: this will change so --swap-poolmetadata defines the operation.
 * FIXME: should be lvconvert --swap-poolmetadata NewLV LV
 */
static int _convert_cache_pool_swapmetadata(struct cmd_context *cmd, struct logical_volume *lv,
					    struct lvconvert_params *lp)
{
	return _lvconvert_pool(cmd, lv, lp);
}

/*
 * Change the number of images in a mirror LV.
 * lvconvert --mirrors Number LV
 */
static int _convert_mirror_number(struct cmd_context *cmd, struct logical_volume *lv,
				  struct lvconvert_params *lp)
{
	return _lvconvert_mirrors(cmd, lv, lp);
}

/*
 * Split images from a mirror LV and use them to create a new LV.
 * lvconvert --splitmirrors Number LV
 *
 * Required options:
 * --name Name
 */

static int _convert_mirror_splitmirrors(struct cmd_context *cmd, struct logical_volume *lv,
					struct lvconvert_params *lp)
{
	return _lvconvert_mirrors(cmd, lv, lp);
}

/*
 * Change the type of log used by a mirror LV.
 * lvconvert --mirrorlog Type LV
 */
static int _convert_mirror_log(struct cmd_context *cmd, struct logical_volume *lv,
				  struct lvconvert_params *lp)
{
	return _lvconvert_mirrors(cmd, lv, lp);
}

/*
 * Replace failed PVs in a mirror LV.
 * lvconvert --repair LV
 *
 * Auxiliary operation:
 * Removes missing, empty PVs from the VG, like vgreduce.
 */
static int _convert_mirror_repair(struct cmd_context *cmd, struct logical_volume *lv,
				  struct lvconvert_params *lp)
{
	struct dm_list *failed_pvs;
	int ret;

	ret = _lvconvert_mirrors_repair(cmd, lv, lp);

	if (ret && arg_is_set(cmd, usepolicies_ARG)) {
		if ((failed_pvs = _failed_pv_list(lv->vg)))
			_remove_missing_empty_pv(lv->vg, failed_pvs);
	}

	return ret;
}

/*
 * Convert mirror LV to linear LV.
 * lvconvert --type linear LV
 *
 * Alternate syntax:
 * lvconvert --mirrors 0 LV
 */
static int _convert_mirror_linear(struct cmd_context *cmd, struct logical_volume *lv,
				  struct lvconvert_params *lp)
{
	return _lvconvert_mirrors(cmd, lv, lp);
}

/*
 * Convert mirror LV to raid1 LV.
 * lvconvert --type raid1 LV
 */
static int _convert_mirror_raid(struct cmd_context *cmd, struct logical_volume *lv,
				struct lvconvert_params *lp)
{
	return _lvconvert_raid(lv, lp);
}

/*
 * Change the number of images in a raid1 LV.
 * lvconvert --mirrors Number LV
 */
static int _convert_raid_number(struct cmd_context *cmd, struct logical_volume *lv,
				struct lvconvert_params *lp)
{
	return _lvconvert_raid(lv, lp);
}

/*
 * Split images from a raid1 LV and use them to create a new LV.
 * lvconvert --splitmirrors Number LV
 *
 * Required options:
 * --trackchanges | --name Name
 */
static int _convert_raid_splitmirrors(struct cmd_context *cmd, struct logical_volume *lv,
				      struct lvconvert_params *lp)
{
	/* FIXME: split the splitmirrors section out of _lvconvert_raid and call it here. */
	return _lvconvert_raid(lv, lp);
}

/*
 * Merge a raid1 LV into originalLV if the raid1 LV was
 * previously split from the originalLV using --trackchanges.
 * lvconvert --merge LV
 */
static int _convert_raid_merge(struct cmd_context *cmd, struct logical_volume *lv,
			       struct lvconvert_params *lp)
{
	/* FIXME: split the merge section out of _lvconvert_raid and call it here. */
	return _lvconvert_raid(lv, lp);
}

/*
 * Replace failed PVs in a raid* LV.
 * lvconvert --repair LV
 *
 * Auxiliary operation:
 * Removes missing, empty PVs from the VG, like vgreduce.
 */
static int _convert_raid_repair(struct cmd_context *cmd, struct logical_volume *lv,
				struct lvconvert_params *lp)
{
	struct dm_list *failed_pvs;
	int ret;

	/* FIXME: split the repair section out of _lvconvert_raid and call it here. */
	ret = _lvconvert_raid(lv, lp);

	if (ret && arg_is_set(cmd, usepolicies_ARG)) {
		if ((failed_pvs = _failed_pv_list(lv->vg)))
			_remove_missing_empty_pv(lv->vg, failed_pvs);
	}

	return ret;
}

/*
 * Replace a specific PV in a raid* LV with another PV.
 * lvconvert --replace PV LV
 */
static int _convert_raid_replace(struct cmd_context *cmd, struct logical_volume *lv,
				 struct lvconvert_params *lp)
{
	/* FIXME: remove the replace section from _lvconvert_raid */
	return _lvconvert_raid(lv, lp);
}

/*
 * Combine a raid* LV with a snapshot LV that was previously
 * split from the raid* LV using --splitsnapshot.
 * lvconvert --type snapshot LV SnapshotLV
 *
 * Alternate syntax:
 * lvconvert --snapshot LV SnapshotLV
 */
static int _convert_raid_snapshot(struct cmd_context *cmd, struct logical_volume *lv,
				  struct lvconvert_params *lp)
{
	return _lvconvert_snapshot(cmd, lv, lp);
}

/*
 * Convert a raid* LV to a thin LV with an external origin.
 * lvconvert --type thin LV
 *
 * Required options:
 * --thinpool LV
 *
 * Auxiliary operation:
 * Converts the --thinpool arg to a thin pool if it is not already.
 *
 * Alternate syntax:
 * lvconvert --thin LV
 */
static int _convert_raid_thin(struct cmd_context *cmd, struct logical_volume *lv,
			      struct lvconvert_params *lp)
{
	/* lvconvert --thin includes an implicit conversion of the thinpool arg to type thin-pool. */
	if (!_lvconvert_pool(cmd, lv, lp)) {
		log_error("Implicit conversion of --thinpool arg to type thin-pool failed.");
		return 0;
	}

	return _lvconvert_thin(cmd, lv, lp);
}

/*
 * Convert a raid* LV to a cache LV.
 * lvconvert --type cache LV
 *
 * Required options:
 * --cachepool LV
 *
 * Auxiliary operation:
 * Converts the --cachepool arg to a cache pool if it is not already.
 *
 * Alternate syntax:
 * lvconvert --cache LV
 */
static int _convert_raid_cache(struct cmd_context *cmd, struct logical_volume *lv,
			       struct lvconvert_params *lp)
{
	/* lvconvert --type cache includes an implicit conversion of the cachepool arg to type cache-pool. */
	if (!_lvconvert_pool(cmd, lv, lp)) {
		log_error("Implicit conversion of --cachepool arg to type cache-pool failed.");
		return 0;
	}

	return _lvconvert_cache(cmd, lv, lp);
}

/*
 * Convert a raid* LV to a thin-pool LV.
 * lvconvert --type thin-pool LV
 *
 * Alternate syntax:
 * This is equivalent to above, but not preferred because it's ambiguous and inconsistent.
 * lvconvert --thinpool LV
 */
static int _convert_raid_thin_pool(struct cmd_context *cmd, struct logical_volume *lv,
				   struct lvconvert_params *lp)
{
	return _lvconvert_pool(cmd, lv, lp);
}

/*
 * Convert a raid* LV to cache-pool LV.
 * lvconvert --type cache-pool LV
 */
static int _convert_raid_cache_pool(struct cmd_context *cmd, struct logical_volume *lv,
				    struct lvconvert_params *lp)
{
	return _lvconvert_pool(cmd, lv, lp);
}

/*
 * Convert a raid* LV to use a different raid level.
 * lvconvert --type raid* LV
 */
static int _convert_raid_raid(struct cmd_context *cmd, struct logical_volume *lv,
			      struct lvconvert_params *lp)
{
	return _lvconvert_raid(lv, lp);
}

/*
 * Convert a raid* LV to a mirror LV.
 * lvconvert --type mirror LV
 */
static int _convert_raid_mirror(struct cmd_context *cmd, struct logical_volume *lv,
			      struct lvconvert_params *lp)
{
	return _lvconvert_raid(lv, lp);
}

/*
 * Convert a raid* LV to a striped LV.
 * lvconvert --type striped LV
 */
static int _convert_raid_striped(struct cmd_context *cmd, struct logical_volume *lv,
				 struct lvconvert_params *lp)
{
	return _lvconvert_raid(lv, lp);
}

/*
 * Convert a raid* LV to a linear LV.
 * lvconvert --type linear LV
 */
static int _convert_raid_linear(struct cmd_context *cmd, struct logical_volume *lv,
				struct lvconvert_params *lp)
{
	return _lvconvert_raid(lv, lp);
}

/*
 * Merge a striped/linear LV into a raid1 LV if the striped/linear LV was
 * previously split from the raid1 LV using --trackchanges.
 * lvconvert --merge LV
 */
static int _convert_striped_merge(struct cmd_context *cmd, struct logical_volume *lv,
				  struct lvconvert_params *lp)
{
	return _lvconvert_raid(lv, lp);
}

/*
 * Combine a linear/striped LV with a snapshot LV that was previously
 * split from the linear/striped LV using --splitsnapshot.
 * lvconvert --type snapshot LV SnapshotLV
 *
 * Alternate syntax:
 * lvconvert --snapshot LV SnapshotLV
 */
static int _convert_striped_snapshot(struct cmd_context *cmd, struct logical_volume *lv,
				     struct lvconvert_params *lp)
{
	return _lvconvert_snapshot(cmd, lv, lp);
}

/*
 * Convert a striped/linear LV to a thin LV with an external origin.
 * lvconvert --type thin LV
 *
 * Required options:
 * --thinpool LV
 *
 * Auxiliary operation:
 * Converts the --thinpool arg to a thin pool if it is not already.
 *
 * Alternate syntax:
 * lvconvert --thin LV
 */
static int _convert_striped_thin(struct cmd_context *cmd, struct logical_volume *lv,
				 struct lvconvert_params *lp)
{
	/* lvconvert --thin includes an implicit conversion of the thinpool arg to type thin-pool. */
	if (!_lvconvert_pool(cmd, lv, lp)) {
		log_error("Conversion of --thinpool arg to type thin-pool failed.");
		return 0;
	}

	return _lvconvert_thin(cmd, lv, lp);
}

/*
 * Convert a striped/linear LV to a cache LV.
 * lvconvert --type cache LV
 *
 * Required options:
 * --cachepool LV
 *
 * Auxiliary operation:
 * Converts the --cachepool arg to a cache pool if it is not already.
 *
 * Alternate syntax:
 * lvconvert --cache LV
 */

static int _convert_striped_cache(struct cmd_context *cmd, struct logical_volume *lv,
				  struct lvconvert_params *lp)
{
	/* lvconvert --cache includes an implicit conversion of the cachepool arg to type cache-pool. */
	if (!_lvconvert_pool(cmd, lv, lp)) {
		log_error("Conversion of --cachepool arg to type cache-pool failed.");
		return 0;
	}

	return _lvconvert_cache(cmd, lv, lp);
}

/*
 * Convert a striped/linear LV to a thin-pool LV.
 * lvconvert --type thin-pool LV
 *
 * Alternate syntax:
 * This is equivalent to above, but not preferred because it's ambiguous and inconsistent.
 * lvconvert --thinpool LV
 */
static int _convert_striped_thin_pool(struct cmd_context *cmd, struct logical_volume *lv,
				      struct lvconvert_params *lp)
{
	return _lvconvert_pool(cmd, lv, lp);
}

/*
 * Convert a striped/linear LV to a cache-pool LV.
 * lvconvert --type cache-pool LV
 */
static int _convert_striped_cache_pool(struct cmd_context *cmd, struct logical_volume *lv,
				       struct lvconvert_params *lp)
{
	return _lvconvert_pool(cmd, lv, lp);
}

/*
 * Convert a striped/linear LV to a mirror LV.
 * lvconvert --type mirror LV
 *
 * Required options:
 * --mirrors Number
 *
 * Alternate syntax:
 * This is equivalent to above when global/mirror_segtype_default="mirror".
 * lvconvert --mirrors Number LV
 */
static int _convert_striped_mirror(struct cmd_context *cmd, struct logical_volume *lv,
				   struct lvconvert_params *lp)
{
	return _lvconvert_mirrors(cmd, lv, lp);
}

/*
 * Convert a striped/linear LV to a raid* LV.
 * lvconvert --type raid* LV
 *
 * Required options:
 * --mirrors Number
 *
 * Alternate syntax:
 * This is equivalent to above when global/mirror_segtype_default="raid1".
 * lvconvert --mirrors Number LV
 */
static int _convert_striped_raid(struct cmd_context *cmd, struct logical_volume *lv,
				 struct lvconvert_params *lp)
{
	return _lvconvert_raid(lv, lp);
}

/*
 * Functions called to perform all valid operations on a given LV type.
 *
 * _convert_<lvtype>
 */
static int _convert_cow_snapshot(struct cmd_context *cmd, struct logical_volume *lv,
				 struct lvconvert_params *lp)
{
	if (lp->splitsnapshot)
		return _convert_cow_snapshot_splitsnapshot(cmd, lv, lp);

	/* FIXME: add --merge-snapshot to make this distinct from --merge-mirror. */
	if (lp->merge)
		return _convert_cow_snapshot_merge(cmd, lv, lp);

	log_error("Operation not permitted on COW snapshot LV %s.", display_lvname(lv));
	log_error("Operations permitted on a COW snapshot LV are:\n"
		  "  --splitsnapshot\n"
		  "  --merge\n");
	return 0;
}

static int _convert_thin_volume(struct cmd_context *cmd, struct logical_volume *lv,
				struct lvconvert_params *lp)
{
	/* FIXME: add --merge-snapshot to make this distinct from --merge-mirror. */
	if (lp->merge)
		return _convert_thin_volume_merge(cmd, lv, lp);

	log_error("Operation not permitted on thin LV %s.", display_lvname(lv));
	log_error("Operations permitted on a thin LV are:\n"
		  "  --merge\n");
	return 0;
}

static int _convert_thin_pool(struct cmd_context *cmd, struct logical_volume *lv,
			      struct lvconvert_params *lp)
{
	if (lp->splitcache)
		return _convert_thin_pool_splitcache(cmd, lv, lp);

	if (lp->split)
		return _convert_thin_pool_splitcache(cmd, lv, lp);

	if (lp->uncache)
		return _convert_thin_pool_uncache(cmd, lv, lp);

	if (lp->cache)
		return _convert_thin_pool_cache(cmd, lv, lp);

	if (lp->repair)
		return _convert_thin_pool_repair(cmd, lv, lp);

	/* FIXME: swapping the thin pool metadata LV needs a specific option like --swapmetadata */
	if (arg_is_set(cmd, poolmetadata_ARG))
		return _convert_thin_pool_swapmetadata(cmd, lv, lp);

	/* FIXME: add --swapmetadata to list of permitted operations. */

	log_error("Operation not permitted on thin pool LV %s.", display_lvname(lv));
	log_error("Operations permitted on a thin pool LV are:\n"
		  "  --splitcache  (operates on cache sub LV)\n"
		  "  --uncache     (operates on cache sub LV)\n"
		  "  --type cache  (operates on data sub LV)\n"
		  "  --repair\n");
	return 0;
}

static int _convert_cache_volume(struct cmd_context *cmd, struct logical_volume *lv,
				 struct lvconvert_params *lp)
{
	if (lp->splitcache)
		return _convert_cache_volume_splitcache(cmd, lv, lp);

	if (lp->split)
		return _convert_cache_volume_splitcache(cmd, lv, lp);

	if (lp->uncache)
		return _convert_cache_volume_uncache(cmd, lv, lp);

	if (arg_is_set(cmd, splitmirrors_ARG))
		return _convert_cache_volume_splitmirrors(cmd, lv, lp);

	if (!strcmp(lp->type_str, SEG_TYPE_NAME_THIN_POOL) ||
	    arg_is_set(cmd, thinpool_ARG))
		return _convert_cache_volume_thin_pool(cmd, lv, lp);

	/* The --thinpool alternative for --type thin-pool is not preferred, so not shown. */

	log_error("Operation not permitted on cache LV %s.", display_lvname(lv));
	log_error("Operations permitted on a cache LV are:\n"
		  "  --splitcache\n"
		  "  --uncache\n"
		  "  --splitmirrors (operates on mirror or raid sub LV)\n"
		  "  --type thin-pool\n");
	return 0;
}

static int _convert_cache_pool(struct cmd_context *cmd, struct logical_volume *lv,
			       struct lvconvert_params *lp)
{
	if (lp->splitcache)
		return _convert_cache_pool_splitcache(cmd, lv, lp);

	if (lp->split)
		return _convert_cache_pool_splitcache(cmd, lv, lp);

	/* FIXME: swapping the cache pool metadata LV needs a specific option like --swapmetadata */
	if (arg_is_set(cmd, poolmetadata_ARG))
		return _convert_cache_pool_swapmetadata(cmd, lv, lp);

	/* FIXME: add --swapmetadata to list of permitted operations. */

	log_error("Operation not permitted on cache pool LV %s.", display_lvname(lv));
	log_error("Operations permitted on a cache pool LV are:\n"
		  "  --splitcache    (operates on cache LV)\n");
	return 0;
}

static int _convert_mirror(struct cmd_context *cmd, struct logical_volume *lv,
			   struct lvconvert_params *lp)
{
	if (arg_is_set(cmd, mirrors_ARG))
		return _convert_mirror_number(cmd, lv, lp);

	if (arg_is_set(cmd, splitmirrors_ARG))
		return _convert_mirror_splitmirrors(cmd, lv, lp);

	if (arg_is_set(cmd, mirrorlog_ARG) || arg_is_set(cmd, corelog_ARG))
		return _convert_mirror_log(cmd, lv, lp);

	if (lp->repair)
		return _convert_mirror_repair(cmd, lv, lp);

	if (_linear_type_requested(lp->type_str))
		return _convert_mirror_linear(cmd, lv, lp);

	if (segtype_is_raid(lp->segtype))
		return _convert_mirror_raid(cmd, lv, lp);

	/*
	 * FIXME: this is here to preserve old behavior, but an
	 * explicit option should be added to enable this case,
	 * rather than making it the result of an ambiguous
	 * "lvconvert vg/lv" command.
	 * Add 'lvconvert --poll-mirror vg/lv' for this case.
	 *
	 * Old behavior was described as:
	 *   "Collapsing a stack of mirrors.
	 *    If called with no argument, try collapsing the resync layers"
	 */
	log_debug("Checking if LV %s is converting.", display_lvname(lv));
	if (lv_is_converting(lv)) {
		lp->need_polling = 1;
		return 1;
	}

	log_error("Operation not permitted on mirror LV %s.", display_lvname(lv));
	log_error("Operations permitted on a mirror LV are:\n"
		  "  --mirrors\n"
		  "  --splitmirrors\n"
		  "  --mirrorlog\n"
		  "  --repair\n"
		  "  --type linear\n"
		  "  --type raid*\n");

	return 0;
}

static int _convert_raid(struct cmd_context *cmd, struct logical_volume *lv,
			 struct lvconvert_params *lp)
{
	/* Permitted convert options on visible or hidden RaidLVs */
	/* The --thinpool alternative for --type thin-pool is not preferred, so not shown. */
	const char *permitted_options = lv_is_visible(lv) ?
		"  --mirrors\n"
		"  --splitmirrors\n"
		"  --merge\n"
		"  --repair\n"
		"  --replace\n"
		"  --type snapshot\n"
		"  --type thin\n"
		"  --type cache\n"
		"  --type thin-pool\n"
		"  --type cache-pool\n"
		"  --type raid*\n"
		"  --type mirror\n"
		"  --type striped\n"
		"  --type linear\n"
		:
		"  --mirrors\n"
		"  --splitmirrors\n"
		"  --repair\n"
		"  --replace\n"
		"  --type raid*\n"
		"  --type mirror\n"
		"  --type striped\n"
		"  --type linear\n";

	/* Applicable to any hidden _or_ visible LVs. */
	if (arg_is_set(cmd, mirrors_ARG))
		return _convert_raid_number(cmd, lv, lp);

	if (lp->repair)
		return _convert_raid_repair(cmd, lv, lp);

	if (arg_is_set(cmd, replace_ARG))
		return _convert_raid_replace(cmd, lv, lp);

	if (arg_is_set(cmd, splitmirrors_ARG))
		return _convert_raid_splitmirrors(cmd, lv, lp);

	if (segtype_is_raid(lp->segtype)) {
		/* Only --type allowed on hidden RaidLV. */
		if (!lv_is_visible(lv) && !arg_is_set(cmd, type_ARG))
			goto out;

		return _convert_raid_raid(cmd, lv, lp);
	}

	if (segtype_is_mirror(lp->segtype))
		return _convert_raid_mirror(cmd, lv, lp);

	if (!strcmp(lp->type_str, SEG_TYPE_NAME_STRIPED))
		return _convert_raid_striped(cmd, lv, lp);

	if (_linear_type_requested(lp->type_str))
		return _convert_raid_linear(cmd, lv, lp);

	/* Applicable to visible LVs only. */
	if (lv_is_visible(lv)) {
		if (lp->merge)
			return _convert_raid_merge(cmd, lv, lp);

		if (!strcmp(lp->type_str, SEG_TYPE_NAME_SNAPSHOT) || arg_is_set(cmd, snapshot_ARG))
			return _convert_raid_snapshot(cmd, lv, lp);

		if (lp->thin)
			return _convert_raid_thin(cmd, lv, lp);

		if (lp->cache)
			return _convert_raid_cache(cmd, lv, lp);

		if (!strcmp(lp->type_str, SEG_TYPE_NAME_THIN_POOL) ||
		    arg_is_set(cmd, thinpool_ARG))
			return _convert_raid_thin_pool(cmd, lv, lp);

		if (!strcmp(lp->type_str, SEG_TYPE_NAME_CACHE_POOL)  ||
		    arg_is_set(cmd, cachepool_ARG))
			return _convert_raid_cache_pool(cmd, lv, lp);
	}

out:
	log_error("Operation not permitted on raid LV %s.", display_lvname(lv));
	log_error("Operations permitted on a raid LV are:\n%s", permitted_options);

	return 0;
}

static int _convert_striped(struct cmd_context *cmd, struct logical_volume *lv,
			    struct lvconvert_params *lp)
{
	const char *mirrors_type = find_config_tree_str(cmd, global_mirror_segtype_default_CFG, NULL);

	/* FIXME: add --merge-mirror to make this distinct from --merge-snapshot. */
	if (lp->merge)
		return _convert_striped_merge(cmd, lv, lp);

	if (lp->snapshot || !strcmp(lp->type_str, SEG_TYPE_NAME_SNAPSHOT))
		return _convert_striped_snapshot(cmd, lv, lp);

	if (lp->thin)
		return _convert_striped_thin(cmd, lv, lp);

	if (lp->cache)
		return _convert_striped_cache(cmd, lv, lp);

	if (!strcmp(lp->type_str, SEG_TYPE_NAME_THIN_POOL) ||
	    arg_is_set(cmd, thinpool_ARG))
		return _convert_striped_thin_pool(cmd, lv, lp);

	if (!strcmp(lp->type_str, SEG_TYPE_NAME_CACHE_POOL) ||
	    arg_is_set(cmd, cachepool_ARG))
		return _convert_striped_cache_pool(cmd, lv, lp);

	if (!strcmp(lp->type_str, SEG_TYPE_NAME_MIRROR))
		return _convert_striped_mirror(cmd, lv, lp);

	if (segtype_is_raid(lp->segtype))
		return _convert_striped_raid(cmd, lv, lp);

	/* --mirrors can mean --type mirror or --type raid1 depending on config setting. */

	if (arg_is_set(cmd, mirrors_ARG) && mirrors_type && !strcmp(mirrors_type, SEG_TYPE_NAME_MIRROR))
		return _convert_striped_mirror(cmd, lv, lp);

	if (arg_is_set(cmd, mirrors_ARG) && mirrors_type && !strcmp(mirrors_type, SEG_TYPE_NAME_RAID1))
		return _convert_striped_raid(cmd, lv, lp);

	/* The --thinpool alternative for --type thin-pool is not preferred, so not shown. */

	log_error("Operation not permitted on striped or linear LV %s.", display_lvname(lv));
	log_error("Operations permitted on a striped or linear LV are:\n"
		  "  --merge\n"
		  "  --type snapshot\n"
		  "  --type thin\n"
		  "  --type cache\n"
		  "  --type thin-pool\n"
		  "  --type cache-pool\n"
		  "  --type mirror\n"
		  "  --type raid*\n");

	return 0;
}

/*
 * Main entry point.
 * lvconvert performs a specific <operation> on a specific <lv_type>.
 *
 * The <operation> is specified by command line args.
 * The <lv_type> is found using lv_is_foo(lv) functions.
 *
 * for each lvtype,
 *     _convert_lvtype();
 *	 for each arg_is_set(operation)
 *	     _convert_lvtype_operation();
 *
 * FIXME: this code (identifying/routing each unique operation through
 * _convert_lvtype_op) was designed to work based on the new type that
 * the user entered after --type, not the final segment type in lp->type_str.
 * Sometimes the two differ because tricks are played with lp->type_str.
 * So, when the use of arg_type_str(type_ARG) here was replaced with
 * lp->type_str, some commands are no longer identified/routed correctly.
 */
static int _lvconvert(struct cmd_context *cmd, struct logical_volume *lv,
		      struct lvconvert_params *lp)
{
	struct lv_segment *seg = first_seg(lv);
	int ret = 0;

	/*
	 * Check some conditions that can never be processed.
	 */

	if (lv_is_locked(lv)) {
		log_error("Cannot convert locked LV %s.", display_lvname(lv));
		goto out;
	}

	if (lv_is_pvmove(lv)) {
		log_error("Cannot convert pvmove LV %s.", display_lvname(lv));
		goto out;
	}

	if (!lv_is_visible(lv)) {
		/*
		 * FIXME: there are some exceptions to the rule of only
		 * operating on visible LVs.  These should be fixed by running
		 * the command on the visible LV with an option indicating
		 * which sub LV is intended rather than naming the !visible LV.
		 */
		if (!lv_is_cache_pool_metadata(lv) &&
		    !lv_is_cache_pool_data(lv) &&
		    !lv_is_thin_pool_metadata(lv) &&
		    !lv_is_thin_pool_data(lv) &&
		    !lv_is_used_cache_pool(lv) &&
		    !lv_is_mirrored(lv) &&
		    !lv_is_raid(lv)) {
			log_error("Cannot convert internal LV %s.", display_lvname(lv));
			goto out;
		}
	}

	/* Set up segtype either from type_str or else to match the existing one. */
	if (!*lp->type_str)
		lp->segtype = seg->segtype;
	else if (!(lp->segtype = get_segtype_from_string(cmd, lp->type_str)))
		goto_out;

	if (!strcmp(lp->type_str, SEG_TYPE_NAME_MIRROR)) {
		if (!lp->mirrors_supplied && !seg_is_raid1(seg)) {
			log_error("Conversions to --type mirror require -m/--mirrors");
			goto out;
		}
	}

	/* lv->segtype can't be NULL */
	if (activation() && lp->segtype->ops->target_present &&
	    !lp->segtype->ops->target_present(cmd, NULL, &lp->target_attr)) {
		log_error("%s: Required device-mapper target(s) not "
			  "detected in your kernel.", lp->segtype->name);
		goto out;
	}

	/* Process striping parameters */
	/* FIXME This is incomplete */
	if (_mirror_or_raid_type_requested(cmd, lp->type_str) || _raid0_type_requested(lp->type_str) ||
	    _striped_type_requested(lp->type_str) || lp->repair || lp->mirrorlog || lp->corelog) {
		/* FIXME Handle +/- adjustments too? */
		if (!get_stripe_params(cmd, lp->segtype, &lp->stripes, &lp->stripe_size, &lp->stripes_supplied, &lp->stripe_size_supplied))
			goto_out;

		if (_raid0_type_requested(lp->type_str) || _striped_type_requested(lp->type_str))
			/* FIXME Shouldn't need to override get_stripe_params which defaults to 1 stripe (i.e. linear)! */
			/* The default keeps existing number of stripes, handled inside the library code */
			if (!arg_is_set(cmd, stripes_long_ARG))
				lp->stripes = 0;
	}

	if (lp->snapshot)
		lp->zero = (lp->segtype->flags & SEG_CANNOT_BE_ZEROED) ? 0 : arg_int_value(cmd, zero_ARG, 1);

	/*
	 * Each LV type that can be converted.
	 * (The existing type of the LV, not a requested type.)
	 */
	if (lv_is_cow(lv)) {
		ret = _convert_cow_snapshot(cmd, lv, lp);
		goto out;
	}

	if (lv_is_thin_volume(lv)) {
		ret = _convert_thin_volume(cmd, lv, lp);
		goto out;
	}

	if (lv_is_thin_pool(lv)) {
		ret = _convert_thin_pool(cmd, lv, lp);
		goto out;
	}

	if (lv_is_cache(lv)) {
		ret = _convert_cache_volume(cmd, lv, lp);
		goto out;
	}

	if (lv_is_cache_pool(lv)) {
		ret = _convert_cache_pool(cmd, lv, lp);
		goto out;
	}

	if (lv_is_mirror(lv)) {
		ret = _convert_mirror(cmd, lv, lp);
		goto out;
	}

	if (lv_is_raid(lv)) {
		ret = _convert_raid(cmd, lv, lp);
		goto out;
	}

	/*
	 * FIXME: add lv_is_striped() and lv_is_linear()?
	 * This does not include raid0 which is caught by the test above.
	 * If operations differ between striped and linear, split this case.
	 */
	if (segtype_is_striped(seg->segtype) || segtype_is_linear(seg->segtype)) {
		ret = _convert_striped(cmd, lv, lp);
		goto out;
	}

	/*
	 * The intention is to explicitly check all cases above and never
	 * reach here, but this covers anything that was missed.
	 */
	log_error("Cannot convert LV %s.", display_lvname(lv));

out:
	return ret ? ECMD_PROCESSED : ECMD_FAILED;
}

static struct convert_poll_id_list* _convert_poll_id_list_create(struct cmd_context *cmd,
								 const struct logical_volume *lv)
{
	struct convert_poll_id_list *idl = (struct convert_poll_id_list *) dm_pool_alloc(cmd->mem, sizeof(struct convert_poll_id_list));

	if (!idl) {
		log_error("Convert poll ID list allocation failed.");
		return NULL;
	}

	if (!(idl->id = _create_id(cmd, lv->vg->name, lv->name, lv->lvid.s))) {
		dm_pool_free(cmd->mem, idl);
		return_NULL;
	}

	idl->is_merging_origin = lv_is_merging_origin(lv);
	idl->is_merging_origin_thin = idl->is_merging_origin && seg_is_thin_volume(find_snapshot(lv));

	return idl;
}

static int _lvconvert_and_add_to_poll_list(struct cmd_context *cmd,
					    struct lvconvert_params *lp,
					    struct logical_volume *lv)
{
	int ret;
	struct lvinfo info;
	struct convert_poll_id_list *idl;

	/* _lvconvert() call may alter the reference in lp->lv_to_poll */
	if ((ret = _lvconvert(cmd, lv, lp)) != ECMD_PROCESSED)
		stack;
	else if (lp->need_polling) {
		if (!lv_info(cmd, lp->lv_to_poll, 0, &info, 0, 0) || !info.exists)
			log_print_unless_silent("Conversion starts after activation.");
		else {
			if (!(idl = _convert_poll_id_list_create(cmd, lp->lv_to_poll)))
				return_ECMD_FAILED;
			dm_list_add(&lp->idls, &idl->list);
		}
	}

	return ret;
}

static int _lvconvert_single(struct cmd_context *cmd, struct logical_volume *lv,
			     struct processing_handle *handle)
{
	struct lvconvert_params *lp = (struct lvconvert_params *) handle->custom_handle;
	struct volume_group *vg = lv->vg;

	if (test_mode() && is_lockd_type(vg->lock_type)) {
		log_error("Test mode is not yet supported with lock type %s.",
			  vg->lock_type);
		return ECMD_FAILED;
	}

	/*
	 * lp->pvh holds the list of PVs available for allocation or removal
	 */
	if (lp->pv_count) {
		if (!(lp->pvh = create_pv_list(cmd->mem, vg, lp->pv_count, lp->pvs, 0)))
			return_ECMD_FAILED;
	} else
		lp->pvh = &vg->pvs;

	if (lp->replace_pv_count &&
	    !(lp->replace_pvh = create_pv_list(cmd->mem, vg,
					       lp->replace_pv_count,
					       lp->replace_pvs, 0)))
			return_ECMD_FAILED;

	lp->lv_to_poll = lv;

	return _lvconvert_and_add_to_poll_list(cmd, lp, lv);
}

static int _lvconvert_merge_single(struct cmd_context *cmd, struct logical_volume *lv,
				   struct processing_handle *handle)
{
	struct lvconvert_params *lp = (struct lvconvert_params *) handle->custom_handle;

	lp->lv_to_poll = lv;

	return _lvconvert_and_add_to_poll_list(cmd, lp, lv);
}

int lvconvert(struct cmd_context * cmd, int argc, char **argv)
{
	int poll_ret, ret;
	struct convert_poll_id_list *idl;
	struct lvconvert_params lp = {
		.conv_type = CONV_OTHER,
		.target_attr = ~0,
		.idls = DM_LIST_HEAD_INIT(lp.idls),
	};
	struct processing_handle *handle = init_processing_handle(cmd, NULL);

	if (!handle) {
		log_error("Failed to initialize processing handle.");
		return ECMD_FAILED;
	}

	handle->custom_handle = &lp;

	if (!_read_params(cmd, argc, argv, &lp)) {
		ret = EINVALID_CMD_LINE;
		goto_out;
	}

	if (lp.merge) {
		ret = process_each_lv(cmd, argc, argv, NULL, NULL,
				      READ_FOR_UPDATE, handle, &_lvconvert_merge_single);
	} else {
		int saved_ignore_suspended_devices = ignore_suspended_devices();

		if (lp.repair || lp.uncache) {
			init_ignore_suspended_devices(1);
			cmd->handles_missing_pvs = 1;
		}

		ret = process_each_lv(cmd, 0, NULL, lp.vg_name, lp.lv_name,
				      READ_FOR_UPDATE, handle, &_lvconvert_single);

		init_ignore_suspended_devices(saved_ignore_suspended_devices);
	}

	dm_list_iterate_items(idl, &lp.idls) {
		poll_ret = _lvconvert_poll_by_id(cmd, idl->id,
						 lp.wait_completion ? 0 : 1U,
						 idl->is_merging_origin,
						 idl->is_merging_origin_thin);
		if (poll_ret > ret)
			ret = poll_ret;
	}

out:
	if (lp.policy_settings)
		dm_config_destroy(lp.policy_settings);

	destroy_processing_handle(cmd, handle);

	return ret;
}