.TH LVSCAN 8 "LVM TOOLS 2.02.169(2)-git (2016-11-30)" "Red Hat, Inc."
.SH NAME
.
lvscan \- List all logical volumes in all volume groups
.P
.
.SH SYNOPSIS
.br
.P
.
\fBlvscan\fP \fIoption_args\fP
.br
    [ \fIoption_args\fP ]
.br
    [ \fIposition_args\fP ]
.br
.P

.SH DESCRIPTION
lvscan scans all VGs or all supported LVM block devices in the system for
LVs. The output consists of one line for each LV indicating whether or not
it is active, a snapshot or origin, the size of the device and its
allocation policy. Use \fBlvs\fP(8) or \fBlvdisplay\fP(8) to obtain more
comprehensive information about LVs.

.P
.SH USAGE
.br
.P
.
\fBlvscan\fP
.br
.RS 4
.ad l
[ \fB-a\fP|\fB--all\fP ]
.ad b
.br
[ COMMON_OPTIONS ]
.RE
.br


\fBlvscan\fP \fB--cache\fP
.br
.RS 4
[ COMMON_OPTIONS ]
.RE
.br
.RS 4
[ \fILV\fP ... ]
.RE


Common options for command:
.
.RS 4
.ad l
[ \fB-b\fP|\fB--blockdevice\fP ]
.ad b
.br
.ad l
[ \fB-P\fP|\fB--partial\fP ]
.ad b
.br
.ad l
[    \fB--ignorelockingfailure\fP ]
.ad b
.br
.ad l
[    \fB--readonly\fP ]
.ad b
.br
.ad l
[    \fB--reportformat\fP \fBbasic\fP|\fBjson\fP ]
.ad b

.RE
.br

Common options for lvm:
.
.RS 4
.ad l
[ \fB-d\fP|\fB--debug\fP ]
.ad b
.br
.ad l
[ \fB-h\fP|\fB--help\fP ]
.ad b
.br
.ad l
[ \fB-q\fP|\fB--quiet\fP ]
.ad b
.br
.ad l
[ \fB-t\fP|\fB--test\fP ]
.ad b
.br
.ad l
[ \fB-v\fP|\fB--verbose\fP ]
.ad b
.br
.ad l
[ \fB-y\fP|\fB--yes\fP ]
.ad b
.br
.ad l
[    \fB--commandprofile\fP \fIString\fP ]
.ad b
.br
.ad l
[    \fB--config\fP \fIString\fP ]
.ad b
.br
.ad l
[    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.ad b
.br
.ad l
[    \fB--longhelp\fP ]
.ad b
.br
.ad l
[    \fB--profile\fP \fIString\fP ]
.ad b
.br
.ad l
[    \fB--version\fP ]
.ad b

.RE

.SH OPTIONS
.br

.HP
.ad l
\fB-a\fP|\fB--all\fP
.br
Show information about internal LVs.
These are components of normal LVs, such as mirrors,
which are not independently accessible, e.g. not mountable.
.ad b

.HP
.ad l
\fB-b\fP|\fB--blockdevice\fP
.br
No longer used.
.ad b

.HP
.ad l
\fB--cache\fP
.br
Scan the devices used by an LV and send the metadata to lvmetad.
.ad b

.HP
.ad l
\fB--commandprofile\fP \fIString\fP
.br
The command profile to use for command configuration.
See \fBlvm.conf\fP(5) for more information about profiles.
.ad b

.HP
.ad l
\fB--config\fP \fIString\fP
.br
Config settings for the command. These override lvm.conf settings.
The String arg uses the same format as lvm.conf,
or may use section/field syntax.
See \fBlvm.conf\fP(5) for more information about config.
.ad b

.HP
.ad l
\fB-d\fP|\fB--debug\fP ...
.br
Set debug level. Repeat from 1 to 6 times to increase the detail of
messages sent to the log file and/or syslog (if configured).
.ad b

.HP
.ad l
\fB--driverloaded\fP \fBy\fP|\fBn\fP
.br
If set to no, the command will not attempt to use device-mapper.
For testing and debugging.
.ad b

.HP
.ad l
\fB-h\fP|\fB--help\fP
.br
Display help text.
.ad b

.HP
.ad l
\fB--ignorelockingfailure\fP
.br
Allows a command to continue with read-only metadata
operations after locking failures.
.ad b

.HP
.ad l
\fB--longhelp\fP
.br
Display long help text.
.ad b

.HP
.ad l
\fB-P\fP|\fB--partial\fP
.br
When set, the tools will do their best to provide access to VGs
that are only partially available (one or more PVs belonging
to the VG are missing from the system). Metadata may not be
changed with this option.
.ad b

.HP
.ad l
\fB--profile\fP \fIString\fP
.br
An alias for --commandprofile or --metadataprofile, depending
on the command.
.ad b

.HP
.ad l
\fB-q\fP|\fB--quiet\fP ...
.br
Suppress output and log messages. Overrides --debug and --verbose.
Repeat once to also suppress any prompts with answer no.
.ad b

.HP
.ad l
\fB--readonly\fP
.br
Run the command in a special read-only mode which will read on-disk
metadata without needing to take any locks. This can be used to peek
inside metadata used by a virtual machine image while the virtual
machine is running.
It can also be used to peek inside the metadata of clustered VGs
when clustered locking is not configured or running. No attempt
will be made to communicate with the device-mapper kernel driver, so
this option is unable to report whether or not LVs are
actually in use.
.ad b

.HP
.ad l
\fB--reportformat\fP \fBbasic\fP|\fBjson\fP
.br
Overrides current output format for reports which is defined globally by
the report/output_format setting in lvm.conf.
\fBbasic\fP is the original format with columns and rows.
If there is more than one report per command, each report is prefixed
with the report name for identification. \fBjson\fP produces report
output in JSON format. See \fBlvmreport\fP(7) for more information.
.ad b

.HP
.ad l
\fB-t\fP|\fB--test\fP
.br
Run in test mode. Commands will not update metadata.
This is implemented by disabling all metadata writing but nevertheless
returning success to the calling function. This may lead to unusual
error messages in multi-stage operations if a tool relies on reading
back metadata it believes has changed but hasn't.
.ad b

.HP
.ad l
\fB-v\fP|\fB--verbose\fP ...
.br
Set verbose level. Repeat from 1 to 4 times to increase the detail
of messages sent to stdout and stderr.
.ad b

.HP
.ad l
\fB--version\fP
.br
Display version information.
.ad b

.HP
.ad l
\fB-y\fP|\fB--yes\fP
.br
Do not prompt for confirmation interactively but always assume the
answer yes. Use with extreme caution.
(For automatic no, see -qq.)
.ad b
.SH VARIABLES
.br

.HP
\fILV\fP
.br
Logical Volume name.  See \fBlvm\fP(8) for valid names.
An LV positional arg generally includes the VG name and LV name, e.g. VG/LV.

.HP
\fIString\fP
.br
See the option description for information about the string content.

.HP
\fISize\fP[UNIT]
.br
Size is an input number that accepts an optional unit.
Input units are always treated as base two values, regardless of
capitalization, e.g. 'k' and 'K' both refer to 1024.
The default input unit is specified by letter, followed by |UNIT.
UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
m|M is megabytes, g|G is gigabytes, t|T is terabytes,
p|P is petabytes, e|E is exabytes.
(This should not be confused with the output control --units, where
capital letters mean multiple of 1000.)
.SH ENVIRONMENT VARIABLES
.br
See \fBlvm\fP(8) for information about environment variables used by lvm.
For example, LVM_VG_NAME can generally be substituted for a required VG parameter.
.SH SEE ALSO

.BR lvm (8)
.BR lvm.conf (5)
.BR lvmconfig (8)

.BR pvchange (8)
.BR pvck (8)
.BR pvcreate (8)
.BR pvdisplay (8)
.BR pvmove (8)
.BR pvremove (8)
.BR pvresize (8)
.BR pvs (8)
.BR pvscan (8) 

.BR vgcfgbackup (8)
.BR vgcfgrestore (8)
.BR vgchange (8)
.BR vgck (8)
.BR vgcreate (8)
.BR vgconvert (8)
.BR vgdisplay (8)
.BR vgexport (8)
.BR vgextend (8)
.BR vgimport (8)
.BR vgimportclone (8)
.BR vgmerge (8)
.BR vgmknodes (8)
.BR vgreduce (8)
.BR vgremove (8)
.BR vgrename (8)
.BR vgs (8)
.BR vgscan (8)
.BR vgsplit (8) 

.BR lvcreate (8)
.BR lvchange (8)
.BR lvconvert (8)
.BR lvdisplay (8)
.BR lvextend (8)
.BR lvreduce (8)
.BR lvremove (8)
.BR lvrename (8)
.BR lvresize (8)
.BR lvs (8)
.BR lvscan (8)

.BR lvm2-activation-generator (8)
.BR blkdeactivate (8)
.BR lvmdump (8)

.BR dmeventd (8)
.BR lvmetad (8)
.BR lvmpolld (8)
.BR lvmlockd (8)
.BR lvmlockctl (8)
.BR clvmd (8)
.BR cmirrord (8)
.BR lvmdbusd (8)

.BR lvmsystemid (7)
.BR lvmreport (7)
.BR lvmraid (7)
.BR lvmthin (7)
.BR lvmcache (7)