lvm2/man/lvm.8

.TH LVM 8 "LVM TOOLS" "Sistina Software UK" \" -*- nroff -*-
.SH NAME
lvm \- LVM2 tools
.SH SYNOPSIS
.B lvm
[command | file]
.SH DESCRIPTION
\fBlvm\fP provides the command-line tools for LVM2.  A separate
manual page describes each command in detail.
.LP
If \fBlvm\fP is invoked with no arguments it presents a readline prompt
(assuming it was compiled with readline support).
LVM commands may be entered interactively at this prompt with 
readline facilities including history and command name and option 
completion.  Refer to \fBreadline\fP(3) for details.
.LP
If \fBlvm\fP is invoked with argv[0] set to the name of a specific
LVM command (for example by using a hard or soft link) it acts as 
that command.  
.LP
One advantage of using the built-in shell is that configuration 
information is cached internally between commands.  
.LP
A file containing a simple script with one command per line 
can also be given on the command line.  The script can also be
executed directly if the first line is #! followed by the absolute
path of \fBlvm\fP.
.LP
Where commands take VG or LV names as arguments, the full path name is
optional.  An LV called "lvol0" in a VG called "vg0" can be specified
as "vg0/lvol0".  If a list of VGs is required but is left empty, a list of
all VGs will be substituted.  If a list of LVs is required
but a VG is given, a list of all the LVs in that VG will be substituted.
So "lvdisplay vg0" will display all the LVs in "vg0".
.SH OPTIONS
The following options are available for many of the commands and are 
not documented on individual manual pages.
.TP
\fB-h | --help\fP \(em Display the help text.
.TP
\fB--version\fP \(em Display version information.
.TP
\fB-v | --verbose\fP \(em Set verbose level.
Repeat from 1 to 3 times to increase the detail of messages 
sent to stdout and stderr.  Overrides config file setting.
.TP
\fB-d | --debug\fP \(em Set debug level.
Repeat from 1 to 6 times to increase the detail of messages sent 
to the log file and/or syslog (if configured).
Overrides config file setting.
.TP
\fB--quiet\fP \(em Suppress output and log messages.
Overrides -d and -v.
.TP
\fB-t | --test\fP \(em Run in test mode.
Commands will not update metadata.
.TP
\fB--driverloaded\fP { \fBy\fP | \fBn\fP }
Whether or not the device-mapper kernel driver is loaded.
If you set this to \fBn\fP, no attempt will be made to contact the driver.
.TP
\fB-A | --autobackup\fP { \fBy\fP | \fBn\fP }
Whether or not to metadata should be backed up automatically after a change.  
You are strongly advised not to disable this!
See
.B vgcfgbackup (8).
.TP
\fB-P | --partial\fP
When set, the tools will do their best to provide access to volume groups
that are only partially available.  Where part of a logical volume is 
missing, \fB/dev/ioerror\fP will be substituted, and you could use
\fBdmsetup (8)\fP to set this up to return I/O errors when accessed,
or create it as a large block device of nulls.  Metadata may not be
changed with this option. To insert a replacement physical volume
of the same or large size use \fBpvcreate -u\fP to set the uuid to 
match the original followed by \fBvgcfgrestore (8)\fP.
.TP
\fB-M | --metadatatype type\fP
Specifies which type of on-disk metadata to use, such as \fBlvm1\fP 
or \fBlvm2\fP, which can be abbreviated to \fB1\fP or \fB2\fP respectively.
The default (lvm2) can be changed by setting \fBformat\fP in the \fBglobal\fP
section of the config file.
.TP
\fB--ignorelockingfailure\fP
This lets you proceed with read-only metadata operations such as
\fBlvchange -ay\fP and \fBvgchange -ay\fP even if the locking module fails.
One use for this is in a system init script if the lock directory 
is mounted read-only when the script runs.
.TP
\fB--addtag tag\fP
Add the tag \fBtag\fP to a PV, VG or LV.  
A tag is a word that can be used to group LVM2 objects of the same type 
together. 
Tags can be given on the command line in place of PV, VG or LV 
arguments.  Tags should be prefixed with @ to avoid ambiguity.
Each tag is expanded by replacing it with all objects possessing
that tag which are of the type expected by its position on the command line.
PVs can only possess tags while they are part of a Volume Group:
PV tags are discarded if the PV is removed from the VG.
As an example, you could tag some LVs as \fBdatabase\fP and others 
as \fBuserdata\fP and then activate the database ones 
with \fBlvchange -ay @database\fP.
Objects can possess multiple tags simultaneously.
Only the new LVM2 metadata format supports tagging: objects using the
LVM1 metadata format cannot be tagged because the on-disk format does not
support it.
Snapshots cannot be tagged.
Characters allowed in tags are: A-Z a-z 0-9 _ + . -
.TP
\fB--deltag tag\fP
Delete the tag \fBtag\fP from a PV, VG or LV, if it's present.
.SH ENVIRONMENT VARIABLES
.TP
\fBLVM_SYSTEM_DIR\fP 
Directory containing lvm.conf and other LVM
system files.
Defaults to "/etc/lvm".
.TP
\fBHOME\fP 
Directory containing .lvm_history if the internal readline shell
is invoked.
.TP
\fBLVM_VG_NAME\fP 
The volume group name that is assumed for 
any reference to a logical volume that doesn't specify a path.
Not set by default.
.SH DIAGNOSTICS
All tools return a status code of zero on success or non-zero on failure.
.SH FILES
.I /etc/lvm/lvm.conf
.br
.I $HOME/.lvm_history
.SH SEE ALSO
.BR lvchange (8),
.BR lvcreate (8),
.BR lvdisplay (8),
.BR lvextend (8),
.BR lvmchange (8),
.BR lvreduce (8),
.BR lvremove (8),
.BR lvrename (8),
.BR lvresize (8),
.BR lvscan (8),
.BR pvchange (8),
.BR pvcreate (8),
.BR pvdisplay (8),
.BR pvscan (8),
.BR vgcfgbackup (8),
.BR vgchange  (8),
.BR vgck (8),
.BR vgcreate (8),
.BR vgdisplay (8),
.BR vgextend (8),
.BR vgmerge (8),
.BR vgreduce (8),
.BR vgremove (8),
.BR vgrename (8),
.BR vgscan (8),
.BR readline (3),
.BR lvm.conf (5)