lvm2/man/vgsplit.8_pregen

.TH VGSPLIT 8 "LVM TOOLS #VERSION#" "Red Hat, Inc."
.SH NAME
vgsplit - Move physical volumes into a new or existing volume group
.
.SH SYNOPSIS
\fBvgsplit\fP \fIoption_args\fP \fIposition_args\fP
.br
    [ \fIoption_args\fP ]
.br
.SH DESCRIPTION
vgsplit moves one or more PVs from a source VG to a destination VG. The
PVs can be specified explicitly or implicitly by naming an LV, in which
case on PVs underlying the LV are moved.

If the destination VG does not exist, a new VG is created (command options
can be used to specify properties of the new VG, also see
\fBvgcreate\fP(8).)

LVs cannot be split between VGs; each LV must be entirely on the PVs in
the source or destination VG.

vgsplit can only move complete PVs. (See \fBpvmove\fP(8) for moving part
of a PV.)
.SH USAGE
Split a VG by specified PVs.
.br
.P
\fBvgsplit\fP \fIVG\fP \fIVG\fP \fIPV\fP ...
.br
.RS 4
[ COMMON_OPTIONS ]
.RE
.br

Split a VG by PVs in a specified LV.
.br
.P
\fBvgsplit\fP \fB-n\fP|\fB--name\fP \fILV\fP \fIVG\fP \fIVG\fP
.br
.RS 4
[ COMMON_OPTIONS ]
.RE
.br

Common options for command:
.
.RS 4
.ad l
[ \fB-A\fP|\fB--autobackup\fP \fBy\fP|\fBn\fP ]
.ad b
.br
.ad l
[ \fB-c\fP|\fB--clustered\fP \fBy\fP|\fBn\fP ]
.ad b
.br
.ad l
[ \fB-l\fP|\fB--maxlogicalvolumes\fP \fINumber\fP ]
.ad b
.br
.ad l
[ \fB-p\fP|\fB--maxphysicalvolumes\fP \fINumber\fP ]
.ad b
.br
.ad l
[ \fB-M\fP|\fB--metadatatype\fP \fBlvm2\fP|\fBlvm1\fP ]
.ad b
.br
.ad l
[    \fB--alloc\fP \fBcontiguous\fP|\fBcling\fP|\fBcling_by_tags\fP|\fBnormal\fP|\fBanywhere\fP|\fBinherit\fP ]
.ad b
.br
.ad l
[    \fB--[vg]metadatacopies\fP \fBall\fP|\fBunmanaged\fP|\fINumber\fP ]
.ad b
.RE

Common options for lvm:
.
.RS 4
.ad l
[ \fB-d\fP|\fB--debug\fP ]
.ad b
.br
.ad l
[ \fB-h\fP|\fB--help\fP ]
.ad b
.br
.ad l
[ \fB-q\fP|\fB--quiet\fP ]
.ad b
.br
.ad l
[ \fB-t\fP|\fB--test\fP ]
.ad b
.br
.ad l
[ \fB-v\fP|\fB--verbose\fP ]
.ad b
.br
.ad l
[ \fB-y\fP|\fB--yes\fP ]
.ad b
.br
.ad l
[    \fB--commandprofile\fP \fIString\fP ]
.ad b
.br
.ad l
[    \fB--config\fP \fIString\fP ]
.ad b
.br
.ad l
[    \fB--driverloaded\fP \fBy\fP|\fBn\fP ]
.ad b
.br
.ad l
[    \fB--longhelp\fP ]
.ad b
.br
.ad l
[    \fB--profile\fP \fIString\fP ]
.ad b
.br
.ad l
[    \fB--version\fP ]
.ad b
.RE
.SH OPTIONS
.HP
.ad l
\fB--alloc\fP \fBcontiguous\fP|\fBcling\fP|\fBcling_by_tags\fP|\fBnormal\fP|\fBanywhere\fP|\fBinherit\fP
.br
Determines the allocation policy when a command needs to allocate
Physical Extents (PEs) from the VG. Each VG and LV has an allocation policy
which can be changed with vgchange/lvchange, or overriden on the
command line.
\fBnormal\fP applies common sense rules such as not placing parallel stripes
on the same PV.
\fBinherit\fP applies the VG policy to an LV.
\fBcontiguous\fP requires new PEs be placed adjacent to existing PEs.
\fBcling\fP places new PEs on the same PV as existing PEs in the same
stripe of the LV.
If there are sufficient PEs for an allocation, but normal does not
use them, \fBanywhere\fP will use them even if it reduces performance,
e.g. by placing two stripes on the same PV.
Optional positional PV args on the command line can also be used to limit
which PVs the command will use for allocation.
See \fBlvm\fP(8) for more information about allocation.
.ad b
.HP
.ad l
\fB-A\fP|\fB--autobackup\fP \fBy\fP|\fBn\fP
.br
Specifies if metadata should be backed up automatically after a change.
Enabling this is strongly advised! See vgcfgbackup(8) for more information.
.ad b
.HP
.ad l
\fB-c\fP|\fB--clustered\fP \fBy\fP|\fBn\fP
.br
Specifies the clustered property of the new VG.
.ad b
.HP
.ad l
\fB--commandprofile\fP \fIString\fP
.br
The command profile to use for command configuration.
See \fBlvm.conf\fP(5) for more information about profiles.
.ad b
.HP
.ad l
\fB--config\fP \fIString\fP
.br
Config settings for the command. These override lvm.conf settings.
The String arg uses the same format as lvm.conf,
or may use section/field syntax.
See \fBlvm.conf\fP(5) for more information about config.
.ad b
.HP
.ad l
\fB-d\fP|\fB--debug\fP ...
.br
Set debug level. Repeat from 1 to 6 times to increase the detail of
messages sent to the log file and/or syslog (if configured).
.ad b
.HP
.ad l
\fB--driverloaded\fP \fBy\fP|\fBn\fP
.br
If set to no, the command will not attempt to use device-mapper.
For testing and debugging.
.ad b
.HP
.ad l
\fB-h\fP|\fB--help\fP
.br
Display help text.
.ad b
.HP
.ad l
\fB--longhelp\fP
.br
Display long help text.
.ad b
.HP
.ad l
\fB-l\fP|\fB--maxlogicalvolumes\fP \fINumber\fP
.br
Sets the maximum number of LVs allowed in a VG.
.ad b
.HP
.ad l
\fB-p\fP|\fB--maxphysicalvolumes\fP \fINumber\fP
.br
Sets the maximum number of PVs that can belong to the VG.
The value 0 removes any limitation.
For large numbers of PVs, also see options --pvmetadatacopies,
and --vgmetadatacopies for improving performance.
.ad b
.HP
.ad l
\fB-M\fP|\fB--metadatatype\fP \fBlvm2\fP|\fBlvm1\fP
.br
Specifies the type of on-disk metadata to use.
\fBlvm2\fP (or just \fB2\fP) is the current, standard format.
\fBlvm1\fP (or just \fB1\fP) is a historical format that
can be used for accessing old data.
.ad b
.HP
.ad l
\fB-n\fP|\fB--name\fP \fIString\fP
.br
Move only PVs used by the named LV.
.ad b
.HP
.ad l
\fB--profile\fP \fIString\fP
.br
An alias for --commandprofile or --metadataprofile, depending
on the command.
.ad b
.HP
.ad l
\fB-q\fP|\fB--quiet\fP ...
.br
Suppress output and log messages. Overrides --debug and --verbose.
Repeat once to also suppress any prompts with answer 'no'.
.ad b
.HP
.ad l
\fB-t\fP|\fB--test\fP
.br
Run in test mode. Commands will not update metadata.
This is implemented by disabling all metadata writing but nevertheless
returning success to the calling function. This may lead to unusual
error messages in multi-stage operations if a tool relies on reading
back metadata it believes has changed but hasn't.
.ad b
.HP
.ad l
\fB-v\fP|\fB--verbose\fP ...
.br
Set verbose level. Repeat from 1 to 4 times to increase the detail
of messages sent to stdout and stderr.
.ad b
.HP
.ad l
\fB--version\fP
.br
Display version information.
.ad b
.HP
.ad l
\fB--[vg]metadatacopies\fP \fBall\fP|\fBunmanaged\fP|\fINumber\fP
.br
Number of copies of the VG metadata that are kept.
VG metadata is kept in VG metadata areas on PVs in the VG,
i.e. reserved space at the start and/or end of the PVs.
Keeping a copy of the VG metadata on every PV can reduce performance
in VGs containing a large number of PVs.
When this number is set to a non-zero value, LVM will automatically
choose PVs on which to store metadata, using the metadataignore flags
on PVs to achieve the specified number.
The number can also be replaced with special string values:
\fBunmanaged\fP causes LVM to not automatically manage the PV
metadataignore flags.
\fBall\fP causes LVM to first clear the metadataignore flags on
all PVs, and then to become unmanaged.
.ad b
.HP
.ad l
\fB-y\fP|\fB--yes\fP
.br
Do not prompt for confirmation interactively but always assume the
answer yes. Use with extreme caution.
(For automatic no, see -qq.)
.ad b
.SH VARIABLES
.HP
\fIVG\fP
.br
Volume Group name.  See \fBlvm\fP(8) for valid names.
.HP
\fIPV\fP
.br
Physical Volume name, a device path under /dev.
For commands managing physical extents, a PV positional arg
generally accepts a suffix indicating a range (or multiple ranges)
of physical extents (PEs). When the first PE is omitted, it defaults
to the start of the device, and when the last PE is omitted it defaults to end.
Start and end range (inclusive): \fIPV\fP[\fB:\fP\fIPE\fP\fB-\fP\fIPE\fP]...
Start and length range (counting from 0): \fIPV\fP[\fB:\fP\fIPE\fP\fB+\fP\fIPE\fP]...
.HP
\fIString\fP
.br
See the option description for information about the string content.
.HP
\fISize\fP[UNIT]
.br
Size is an input number that accepts an optional unit.
Input units are always treated as base two values, regardless of
capitalization, e.g. 'k' and 'K' both refer to 1024.
The default input unit is specified by letter, followed by |UNIT.
UNIT represents other possible input units: \fBbBsSkKmMgGtTpPeE\fP.
b|B is bytes, s|S is sectors of 512 bytes, k|K is kilobytes,
m|M is megabytes, g|G is gigabytes, t|T is terabytes,
p|P is petabytes, e|E is exabytes.
(This should not be confused with the output control --units, where
capital letters mean multiple of 1000.)
.SH ENVIRONMENT VARIABLES
See \fBlvm\fP(8) for information about environment variables used by lvm.
For example, LVM_VG_NAME can generally be substituted for a required VG parameter.
.SH SEE ALSO

.BR lvm (8)
.BR lvm.conf (5)
.BR lvmconfig (8)

.BR pvchange (8)
.BR pvck (8)
.BR pvcreate (8)
.BR pvdisplay (8)
.BR pvmove (8)
.BR pvremove (8)
.BR pvresize (8)
.BR pvs (8)
.BR pvscan (8) 

.BR vgcfgbackup (8)
.BR vgcfgrestore (8)
.BR vgchange (8)
.BR vgck (8)
.BR vgcreate (8)
.BR vgconvert (8)
.BR vgdisplay (8)
.BR vgexport (8)
.BR vgextend (8)
.BR vgimport (8)
.BR vgimportclone (8)
.BR vgmerge (8)
.BR vgmknodes (8)
.BR vgreduce (8)
.BR vgremove (8)
.BR vgrename (8)
.BR vgs (8)
.BR vgscan (8)
.BR vgsplit (8) 

.BR lvcreate (8)
.BR lvchange (8)
.BR lvconvert (8)
.BR lvdisplay (8)
.BR lvextend (8)
.BR lvreduce (8)
.BR lvremove (8)
.BR lvrename (8)
.BR lvresize (8)
.BR lvs (8)
.BR lvscan (8)

.BR lvm2-activation-generator (8)
.BR blkdeactivate (8)
.BR lvmdump (8)

.BR dmeventd (8)
.BR lvmetad (8)
.BR lvmpolld (8)
.BR lvmlockd (8)
.BR lvmlockctl (8)
.BR clvmd (8)
.BR cmirrord (8)
.BR lvmdbusd (8)

.BR lvmsystemid (7)
.BR lvmreport (7)
.BR lvmraid (7)
.BR lvmthin (7)
.BR lvmcache (7)