lvm2/tools/command-lines.in

# Copyright (C) 2001-2004 Sistina Software, Inc. All rights reserved.
# Copyright (C) 2004-2017 Red Hat, Inc. All rights reserved.
#
# This file is part of LVM2.
#
# This copyrighted material is made available to anyone wishing to use,
# modify, copy, or redistribute it subject to the terms and conditions
# of the GNU Lesser General Public License v.2.1.
#
# You should have received a copy of the GNU Lesser General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
#
# Syntax
#
# A new command has a unique combination of:
# command name, required option args and required
# positional args.
#
# To define a new command, begin a single line with a
# command name, followed by required options/args,
# (e.g. --foo, or --foo val), followed by required
# positional args, (e.g. VG)
#
# After the single line of required elements are lines
# of optional elements:
# OO: <optional --option args>
# OP: <optional positional args>
#
# command_name required_opt_arg ... required_pos_arg ...
# OO: optional_opt_arg, ...
# OP: optional_pos_arg ...
#
# required_opt_arg/optional_opt_arg must begin with the
# long form option name, e.g. --foo.  If the option name
# takes a value, then the type of value is specified,
# e.g. --foo String.
#
# Possible option names are listed in args.h
#
# Use --foo_long to specify that only the long form of
# --foo is accepted by the command.  (This is uncommon.)
#
# Possible option arg types are shown in tools/vals.h,
# e.g. Bool, String, VG, SizeMB.
#
# --option args outside the list of types in vals.h are treated
# as literal (non-variable) strings or numbers.
#
# positional args can be multiple types separated by |, e.g. VG|LV|Tag
#
# If a positional arg is repeatable, it is followed by ..., e.g. VG|LV|Tag ...
#
# LV can have a suffix indicating the LV type, e.g. LV_linear, LV_thinpool.
# LV_raid represents any raidN.  LV_type1_type2_type3 when the LV is
# limited to multiple specific types.
#
# Note that two commands whose required paramters differ only by
# the LV types they accept are ambiguous.  That is, they cannot be
# distinguished by just looking at the command, but require reading
# the VG to find the LV type.  So, command definitions that differ
# only in accepted LV types are not allowed.  It would be best to
# distinguish them by using different option names.
# There are FIXME's below for some of these cases.
#
# VG, LV can have the suffix _new, indicating the named VG or LV
# does not yet exist.
#
# If Select is included in pos_arg, it means that the pos_arg
# may be empty if the --select option is used.
#
# --size and --extents are interchangable, but only --size is used
# in these definitions to keep them simpler.  --extents is
# automatically included and recognized as an alternative to --size.
#
# lvcreate generally requires a VG arg in position 1 and does not
# require the --name option (when --name is omitted, a name is
# generated).  But, all commands of that form have a variant which
# is not defined here, but which is automatically recognized as
# being equivalent.  That variant allows the required VG arg to
# be omitted when --name VG/LV is specified, or when the
# LVM_VG_NAME env var is set and --name LV is specified.
# The lvcreate variants with --name and without a VG arg are
# automatically recognized as an alternative to the defined
# command forms requiring the VG and no --name.
# Also, --thinpool VG/LV or --cachepool VG/LV can be used in
# place of --name to provide the VG name instead of pos 1.
#
# Note that one the most difficult aspect of these definitions is
# the variants of --thin / --type thin / --type thin-pool,
# --cache / --type cache / --type cache-pool.
# There are no consistent rules to follow and the behaviors are
# unpredictable; each possible variation and combination needs
# to be tested individually to see what it means.
#
# Some options have multiple names, but only one form of the name
# is used in these definitions.  Synonyms will be recognized when
# matching a command to a command definition.
#
# used in definitions below (equivalent but not used in definitions)
# mirrorlog core (not corelog)
# resizeable (resizable or allocation)
# allocatable (allocation)
# activate (available)
# rebuild (raidrebuild)
# syncaction (raidsyncaction)
# writemostly (raidwritemostly)
# minrecoveryrate (raidminrecoveryrate)
# maxrecoveryrate (raidmaxrecoveryrate)
# writebehind (raidwritebehind)
# virtualsize (virtualoriginsize)
# splitcache (split)
# vgmetadatacopies (metadatacopies)
# pvmetadatacopies (metadatacopies)
#
# "---" is like a comment line, used to separate text for readability
#
# ID: A unique string identifying the command.  Two commands that do
# the same thing, but are alternate syntaxes can share the same ID,
# in which case the implementation would have to sort out which
# args to look at for the required parameters.  Or, the two commands
# could use differnet IDs, in which case the implementation would
# know where to look for each parameter.
#
# DESC: A description of the command.  The "DESC:" tags will be
# included in the text as indicators of new lines when printing
# the descriptions for help/man output.
#
# RULE: rules that a given command must follow, i.e. required (and)
# or invalid (not) combinations of options, LV types or LV properties.
#
# RULE: A and|not B
#
# Conditions in A are applied to a given command+LV.
# If the conditions in A are true, then the checks in B
# are applied.  If the checks in B are true|false according
# to and|not, then the command fails|continues.
#
# When A is "all", the conditions in B are always applied.
#
# Conditions:
# . if any --option listed is set, the checks may apply
# . if any LV_type listed matches LV, the checks may apply
# . if all lv_is_prop listed matches LV, the checks may apply
# . if all of the above pass, then perform the checks
#
# Checks for "and":
# . if any --option listed is not set, then fail
# . if none of the LV_types matches the LV, then fail
# . if any of the lv_is_prop do not match the LV, then fail
#
# Checks for "not":
# . if any --option listed is set, then fail
# . if any of the LV_types matches the LV, then fail
# . if any of the lv_is_prop match the LV, then fail
#
# RULE: --option|LV_type|lv_is_prop|all ... and|not --option|LV_type|lv_is_prop ...
#
# RULE: --opt1 not --opt2
# RULE: --opt1 and --opt2
# RULE: --opt1 LV_type1 lv_is_prop1 and --opt2
# RULE: --opt1 LV_type1 and lv_is_prop1
# RULE: LV_type1 and lv_is_prop1
#
#

#
# For efficiency, sets of options can be defined and reused
# in multiple command definitions.
#
# To define a common set of options:
# OO_NAME: --foo, --bar String
#
# To use this set of options, include it on the OO: line, e.g.
# OO: --example, OO_NAME
#
# which is expaneded to
# OO: --example, --foo, --bar String
#
# Including OO_NAME after a command name on the required line
# means that any one of the options is required and the rest
# are optional.  The usage syntax for this case is printed as:
# command (--foo A, --bar B)
#

#
# OO_ALL is included in every command automatically.
#
OO_ALL: --commandprofile String, --config String, --debug,
--driverloaded Bool, --help, --longhelp, --profile String, --quiet,
--verbose, --version, --yes, --test

#
# options for pvs, lvs, vgs, fullreport
#
OO_REPORT: --aligned, --all, --binary, --configreport ConfigReport, --foreign,
--ignorelockingfailure, --ignoreskippedcluster, --logonly,
--nameprefixes, --noheadings, --nolocking, --nosuffix,
--options String, --partial, --readonly, --reportformat ReportFmt, --rows,
--select String, --separator String, --shared, --sort String,
--trustcache, --unbuffered, --units Units, --unquoted

#
# options for config, dumpconfig, lvmconfig
#
OO_CONFIG: --atversion String, --typeconfig ConfigType, --file String, --ignoreadvanced,
--ignoreunsupported, --ignorelocal, --list, --mergedconfig, --metadataprofile String,
--sinceversion String, --showdeprecated, --showunsupported, --validate, --withsummary,
--withcomments, --withspaces, --unconfigured, --withversions

---

# None of these can function as a required option for lvchange.

OO_LVCHANGE: --autobackup Bool, --force, --ignoremonitoring,
--ignoreskippedcluster, --noudevsync, --reportformat ReportFmt,
--select String

# Any of these can function as a required option for lvchange.
# profile is also part of OO_ALL, but is repeated in OO_LVCHANGE_META
# because it can function as a required opt.

OO_LVCHANGE_META: --addtag Tag, --deltag Tag,
--alloc Alloc, --contiguous Bool,
--detachprofile, --metadataprofile String, --profile String,
--permission Permission, --readahead Readahead, --setactivationskip Bool,
--errorwhenfull Bool, --discards Discards, --zero Bool,
--cachemode CacheMode, --cachepolicy String, --cachesettings String,
--minrecoveryrate SizeKB, --maxrecoveryrate SizeKB,
--writebehind Number, --writemostly WriteMostlyPV, --persistent n

# It's unfortunate that activate needs to be optionally allowed here;
# it should only be used explicitly, but it's been previously allowed
# in combination with unrelated metadata changes.

lvchange OO_LVCHANGE_META VG|LV|Tag|Select ...
OO: --activate Active, OO_LVCHANGE
ID: lvchange_properties
DESC: Change a general LV attribute.
DESC: For options listed in parentheses, any one is
DESC: required, after which the others are optional.
RULE: all not lv_is_pvmove lv_is_mirror_log lv_is_mirror_image
RULE: all and lv_is_vg_writable
RULE: --contiguous not --alloc
RULE: --profile not --detachprofile
RULE: --metadataprofile not --detachprofile
RULE: --minrecoveryrate --maxrecoveryrate and LV_raid
RULE: --writebehind --writemostly and LV_raid1
RULE: --cachemode --cachepolicy --cachesettings and LV_cache LV_cachepool
RULE: --errorwhenfull --discards --zero and LV_thinpool
RULE: --permission not lv_is_external_origin lv_is_raid_metadata lv_is_raid_image LV_thinpool
RULE: --alloc --contiguous --metadataprofile --permission --persistent --profile --readahead not lv_is_thick_origin
RULE: --alloc --discards --zero --cachemode --cachepolicy --cachesettings not lv_is_partial

# It's unfortunate that activate needs to be optionally allowed here,
# like above, it was previouly allowed in combination.

lvchange --resync VG|LV_raid_mirror|Tag|Select ...
OO: --activate Active, OO_LVCHANGE
ID: lvchange_resync
DESC: Resyncronize a mirror or raid LV.
RULE: all not lv_is_pvmove lv_is_locked
RULE: all not LV_raid0

lvchange --syncaction SyncAction VG|LV_raid|Tag|Select ...
OO: OO_LVCHANGE
ID: lvchange_syncaction
DESC: Resynchronize or check a raid LV.
RULE: all not LV_raid0

lvchange --rebuild PV VG|LV_raid|Tag|Select ...
OO: OO_LVCHANGE
ID: lvchange_rebuild
DESC: Reconstruct data on specific PVs of a raid LV.
RULE: all not LV_raid0

lvchange --activate Active VG|LV|Tag|Select ...
OO: --activationmode ActivationMode, --partial, --ignoreactivationskip,
--ignorelockingfailure, --sysinit, OO_LVCHANGE
ID: lvchange_activate
DESC: Activate or deactivate an LV.

lvchange --refresh VG|LV|Tag|Select ...
OO: --partial, --poll Bool, OO_LVCHANGE
ID: lvchange_refresh
DESC: Reactivate an LV using the latest metadata.

lvchange --monitor Bool VG|LV|Tag|Select ...
OO: --poll Bool, OO_LVCHANGE
ID: lvchange_monitor
DESC: Start or stop monitoring an LV from dmeventd.
RULE: all not lv_is_pvmove

lvchange --poll Bool VG|LV|Tag|Select ...
OO: --monitor Bool, OO_LVCHANGE
ID: lvchange_poll
DESC: Start or stop processing an LV conversion.

lvchange --persistent y --minor Number LV
OO: --major Number, OO_LVCHANGE
ID: lvchange_persistent
DESC: Make the minor device number persistent for an LV.
RULE: all not LV_thinpool LV_cachepool

---

OO_LVCONVERT_RAID: --mirrors SNumber, --stripes_long Number,
--stripesize SizeKB, --regionsize RegionSize, --interval Number

OO_LVCONVERT_POOL: --poolmetadata LV, --poolmetadatasize SizeMB,
--poolmetadataspare Bool, --readahead Readahead, --chunksize SizeKB

OO_LVCONVERT_CACHE: --cachemode CacheMode, --cachepolicy String,
--cachesettings String, --zero Bool

OO_LVCONVERT: --alloc Alloc, --background, --force, --noudevsync

---

# These cover all the core, raid-related type conversions.
# They are all routed into the core raid conversion code.

lvconvert --type linear LV
OO: OO_LVCONVERT_RAID, OO_LVCONVERT
OP: PV ...
ID: lvconvert_raid_types
DESC: Convert LV to linear.
RULE: all not lv_is_locked lv_is_pvmove

lvconvert --type striped LV
OO: OO_LVCONVERT_RAID, OO_LVCONVERT
OP: PV ...
ID: lvconvert_raid_types
DESC: Convert LV to striped.
RULE: all not lv_is_locked lv_is_pvmove

lvconvert --type mirror LV
OO: OO_LVCONVERT_RAID, OO_LVCONVERT, --mirrorlog MirrorLog
OP: PV ...
ID: lvconvert_raid_types
DESC: Convert LV to type mirror (also see type raid1),
DESC: (also see lvconvert --mirrors).
RULE: all not lv_is_locked lv_is_pvmove
FLAGS: SECONDARY_SYNTAX

# When LV is already raid, this changes the raid layout
# (changing layout of raid0 and raid1 not allowed.)

lvconvert --type raid LV
OO: OO_LVCONVERT_RAID, OO_LVCONVERT
OP: PV ...
ID: lvconvert_raid_types
DESC: Convert LV to raid or change raid layout
DESC: (a specific raid level must be used, e.g. raid1).
RULE: all not lv_is_locked lv_is_pvmove

lvconvert --mirrors SNumber LV
OO: OO_LVCONVERT_RAID, OO_LVCONVERT, --mirrorlog MirrorLog
OP: PV ...
ID: lvconvert_raid_types
DESC: Convert LV to raid1 or mirror, or change number of mirror images.
RULE: all not lv_is_locked lv_is_pvmove

lvconvert --stripes_long Number LV_raid
OO: OO_LVCONVERT, --interval Number, --regionsize RegionSize, --stripesize SizeKB
OP: PV ...
ID: lvconvert_raid_types
DESC: Convert raid LV to change number of stripe images.
RULE: all not lv_is_locked lv_is_pvmove
RULE: all not LV_raid0 LV_raid1

lvconvert --stripesize SizeKB LV_raid
OO: OO_LVCONVERT, --interval Number, --regionsize RegionSize
ID: lvconvert_raid_types
DESC: Convert raid LV to change the stripe size.
RULE: all not lv_is_locked lv_is_pvmove
RULE: all not LV_raid0 LV_raid1

lvconvert --regionsize RegionSize LV_raid
OO: OO_LVCONVERT
ID: lvconvert_change_region_size
DESC: Change the region size of an LV.
RULE: all not lv_is_locked lv_is_pvmove
RULE: all not LV_raid0
FLAGS: SECONDARY_SYNTAX

---

# lvconvert raid-related utilities
# Create a new command set for these and migrate them out of lvconvert?

lvconvert --splitmirrors Number --name LV_new LV_raid1_mirror_cache
OO: OO_LVCONVERT
OP: PV ...
ID: lvconvert_split_mirror_images
DESC: Split images from a raid1 or mirror LV and use them to create a new LV.
RULE: all not lv_is_locked lv_is_pvmove

lvconvert --splitmirrors Number --trackchanges LV_raid1_cache
OO: OO_LVCONVERT
OP: PV ...
ID: lvconvert_split_mirror_images
DESC: Split images from a raid1 LV and track changes to origin.
RULE: all not lv_is_locked lv_is_pvmove

lvconvert --mergemirrors LV_linear_raid|VG|Tag ...
OO: OO_LVCONVERT
ID: lvconvert_merge_mirror_images
DESC: Merge LV images that were split from a raid1 LV.
RULE: all not lv_is_locked lv_is_pvmove lv_is_merging_origin lv_is_virtual_origin lv_is_external_origin lv_is_merging_cow

lvconvert --mirrorlog MirrorLog LV_mirror
OO: OO_LVCONVERT
OP: PV ...
ID: lvconvert_change_mirrorlog
DESC: Change the type of mirror log used by a mirror LV.
RULE: all not lv_is_locked lv_is_pvmove
FLAGS: SECONDARY_SYNTAX

---

# lvconvert utilities for creating/maintaining thin and cache objects.
# Create a new command set for these and migrate them out of lvconvert?

lvconvert --type thin --thinpool LV LV_linear_striped_raid_cache
OO: --thin, --originname LV_new, --zero Bool, OO_LVCONVERT_POOL, OO_LVCONVERT
ID: lvconvert_to_thin_with_external
DESC: Convert LV to a thin LV, using the original LV as an external origin.
RULE: all and lv_is_visible
RULE: all not lv_is_locked

# alternate form of lvconvert --type thin
lvconvert --thin --thinpool LV LV_linear_striped_raid_cache
OO: --type thin, --originname LV_new, --zero Bool, OO_LVCONVERT_POOL, OO_LVCONVERT
ID: lvconvert_to_thin_with_external
DESC: Convert LV to a thin LV, using the original LV as an external origin
DESC: (infers --type thin).
FLAGS: SECONDARY_SYNTAX
RULE: all and lv_is_visible
RULE: all not lv_is_locked

---

lvconvert --type cache --cachepool LV LV_linear_striped_raid_thinpool
OO: --cache, OO_LVCONVERT_CACHE, OO_LVCONVERT_POOL, OO_LVCONVERT
ID: lvconvert_to_cache_vol
DESC: Convert LV to type cache.
RULE: all and lv_is_visible

# alternate form of lvconvert --type cache
lvconvert --cache --cachepool LV LV_linear_striped_raid_thinpool
OO: --type cache, OO_LVCONVERT_CACHE, OO_LVCONVERT_POOL, OO_LVCONVERT
ID: lvconvert_to_cache_vol
DESC: Convert LV to type cache (infers --type cache).
RULE: all and lv_is_visible
FLAGS: SECONDARY_SYNTAX

---

lvconvert --type thin-pool LV_linear_striped_raid_cache
OO: --stripes_long Number, --stripesize SizeKB,
--discards Discards, --zero Bool, OO_LVCONVERT_POOL, OO_LVCONVERT
OP: PV ...
ID: lvconvert_to_thinpool
DESC: Convert LV to type thin-pool.
RULE: all and lv_is_visible
RULE: all not lv_is_locked lv_is_origin lv_is_merging_origin lv_is_external_origin lv_is_virtual

# This command syntax has two different meanings depending on
# whether the LV pos arg is already a thin pool or not.
#
# 1. When the LV arg is not a pool, this command converts
# the LV into a pool, optionally using a specified meta LV.
# This is an alternate form of the primary command:
# lvconvert --type thin-pool LV
#
# 2. When the LV is is already a pool and a meta LV is specified,
# the meta LV is swapped.  Swapping a meta LV is a very specialized
# operation that users should never use.
# This is an alternate form of the primary command:
# lvconvert --swapmetadata --poolmetadata LV LV
#
# The command def cannot include --poolmetadata as a required
# option, otherwise 1 would not pass, so the validation of
# this option cannot be done by the command defs, but has to
# be done ad hoc in the lvconvert implementation.
#
# This command syntax is deprecated, and the primary forms
# of creating a pool or swapping metadata should be used.

lvconvert --thinpool LV_linear_striped_raid_cache_thinpool
OO: --type thin-pool, --stripes_long Number, --stripesize SizeKB,
--discards Discards, --zero Bool, OO_LVCONVERT_POOL, OO_LVCONVERT
OP: PV ...
ID: lvconvert_to_thinpool_or_swap_metadata
DESC: Convert LV to type thin-pool (variant, use --type thin-pool).
DESC: Swap metadata LV in a thin pool (variant, use --swapmetadata).
FLAGS: PREVIOUS_SYNTAX

---

lvconvert --type cache-pool LV_linear_striped_raid
OO: OO_LVCONVERT_CACHE, OO_LVCONVERT_POOL, OO_LVCONVERT
OP: PV ...
ID: lvconvert_to_cachepool
DESC: Convert LV to type cache-pool.

# This command syntax has two different meanings depending on
# whether the LV pos arg is already a cache pool or not.
#
# 1. When the LV arg is not a pool, this command converts
# the LV into a pool, optionally using a specified meta LV.
# This is an alternate form of the primary command:
# lvconvert --type cache-pool LV
#
# 2. When the LV is is already a pool and a meta LV is specified,
# the meta LV is swapped.  Swapping a meta LV is a very specialized
# operation that users should never use.
# This is an alternate form of the primary command:
# lvconvert --swapmetadata --poolmetadata LV LV
#
# The command def cannot include --poolmetadata as a required
# option, otherwise 1 would not pass, so the validation of
# this option cannot be done by the command defs, but has to
# be done ad hoc in the lvconvert implementation.
#
# This command syntax is deprecated, and the primary forms
# of creating a pool or swapping metadata should be used.

lvconvert --cachepool LV_linear_striped_raid_cachepool
OO: --type cache-pool, OO_LVCONVERT_CACHE, OO_LVCONVERT_POOL, OO_LVCONVERT
OP: PV ...
ID: lvconvert_to_cachepool_or_swap_metadata
DESC: Convert LV to type cache-pool (variant, use --type cache-pool).
DESC: Swap metadata LV in a cache pool (variant, use --swapmetadata).
FLAGS: PREVIOUS_SYNTAX

---

lvconvert --splitcache LV_cachepool_cache_thinpool
OO: OO_LVCONVERT
ID: lvconvert_split_and_keep_cachepool
DESC: Separate and keep the cache pool from a cache LV.

---

lvconvert --uncache LV_cache_thinpool
OO: OO_LVCONVERT
ID: lvconvert_split_and_remove_cachepool
DESC: Separate and delete the cache pool from a cache LV.
FLAGS: SECONDARY_SYNTAX

---

lvconvert --swapmetadata --poolmetadata LV LV_thinpool_cachepool
OO: --chunksize SizeKB, OO_LVCONVERT
ID: lvconvert_swap_pool_metadata
DESC: Swap metadata LV in a thin pool or cache pool (for repair only).
FLAGS: SECONDARY_SYNTAX

---

# lvconvert --merge is an extremely ambiguous command.
# It can do very different operations, but which one depends
# on knowing the LV type.  So, the command doesn't know what
# it's actually doing until quite late, when processing a
# single LV.  When passed a VG or tag, it will do different
# operations on each LV it finds, depending on the current LV type.

lvconvert --merge LV_linear_striped_raid_thin_snapshot|VG|Tag ...
OO: --background, --interval Number, OO_LVCONVERT
ID: lvconvert_merge
DESC: Merge LV that was split from a mirror (variant, use --mergemirrors).
DESC: Merge thin LV into its origin LV (variant, use --mergethin).
DESC: Merge COW snapshot LV into its origin (variant, use --mergesnapshot).
RULE: all not lv_is_locked lv_is_pvmove lv_is_merging_origin lv_is_virtual_origin lv_is_external_origin lv_is_merging_cow
FLAGS: SECONDARY_SYNTAX

---

lvconvert --mergethin LV_thin ...
OO: OO_LVCONVERT
ID: lvconvert_merge_thin
DESC: Merge thin LV into its origin LV.
RULE: all not lv_is_locked lv_is_pvmove lv_is_merging_origin lv_is_virtual_origin lv_is_external_origin lv_is_merging_cow
RULE: all and lv_is_visible

---

# lvconvert snapshot-related utilities
# Create a new command set for these and migrate them out of lvconvert?

lvconvert --mergesnapshot LV_snapshot ...
OO: --background, --interval Number, OO_LVCONVERT
ID: lvconvert_merge_snapshot
DESC: Merge COW snapshot LV into its origin.
RULE: all not lv_is_locked lv_is_pvmove lv_is_merging_origin lv_is_virtual_origin lv_is_external_origin lv_is_merging_cow
RULE: all and lv_is_visible

---

lvconvert --splitsnapshot LV_snapshot
OO: OO_LVCONVERT
ID: lvconvert_split_cow_snapshot
DESC: Separate a COW snapshot from its origin LV.
RULE: all not lv_is_locked lv_is_pvmove lv_is_origin lv_is_external_origin lv_is_merging_cow
FLAGS: SECONDARY_SYNTAX

---

# NB: an unsual use of position args here, the first pos arg
# (will become origin LV) is not passed to process_each,
# the second pos arg (will become cow LV) is given to
# process_each.  Because the first pos LV is not handled
# by process_each_lv, it cannot be checked against this
# command def, so a specific LV type in the first pos
# will not be checked.

# alternate form of lvconvert --snapshot
lvconvert --type snapshot LV LV_linear
OO: --snapshot, --chunksize SizeKB, --zero Bool, OO_LVCONVERT
ID: lvconvert_combine_split_snapshot
DESC: Combine a former COW snapshot (second arg) with a former
DESC: origin LV (first arg) to reverse a splitsnapshot command.
RULE: all not lv_is_locked lv_is_pvmove
RULE: all and lv_is_visible
FLAGS: SECONDARY_SYNTAX

lvconvert --snapshot LV LV_linear
OO: --type snapshot, --chunksize SizeKB, --zero Bool, OO_LVCONVERT
ID: lvconvert_combine_split_snapshot
DESC: Combine a former COW snapshot (second arg) with a former
DESC: origin LV (first arg) to reverse a splitsnapshot command.
RULE: all not lv_is_locked lv_is_pvmove
RULE: all and lv_is_visible
FLAGS: SECONDARY_SYNTAX

---

# lvconvert repair/replace utilitiles
# Create a new command set for these and migrate them out of lvconvert?

# FIXME: use specific option names to distinguish these two
# very different commands, e.g.
#
# lvconvert --repair-pvs LV_raid_mirror
# DESC: Replace failed PVs in a raid or mirror LV.
#
# lvconvert --repair-thinpool LV_thinpool
# DESC: Repair a thin pool.
#
# lvm may want to do different things, or allow different options 
# depending on which operation is being run, but as it stands, it
# cannot do anything operation-specific until after the VG is read
# and the LV type is known.

lvconvert --repair LV_raid_mirror_thinpool
OO: --usepolicies, --interval Number, OO_LVCONVERT
OP: PV ...
ID: lvconvert_repair_pvs_or_thinpool
DESC: Replace failed PVs in a raid or mirror LV.
DESC: Repair a thin pool.
RULE: all not lv_is_locked lv_is_pvmove

lvconvert --replace PV LV_raid
OO: OO_LVCONVERT
OP: PV ...
ID: lvconvert_replace_pv
DESC: Replace specific PV(s) in a raid LV with another PV.
RULE: all not lv_is_locked lv_is_pvmove

---

# This command just (re)starts the polling process on the LV
# to continue a previous conversion.

lvconvert --startpoll LV_mirror_raid
OO: OO_LVCONVERT
ID: lvconvert_start_poll
DESC: Poll LV to continue conversion.
RULE: all and lv_is_converting

# alternate form of lvconvert --startpoll, this is only kept
# for compat since this was how it used to be done.
lvconvert LV_mirror_raid
OO: OO_LVCONVERT
ID: lvconvert_start_poll
DESC: Poll LV to continue conversion (also see --startpoll).
RULE: all and lv_is_converting
FLAGS: SECONDARY_SYNTAX

---

# --extents is not specified; it's an automatic alternative for --size

OO_LVCREATE: --addtag Tag, --alloc Alloc, --autobackup Bool, --activate Active,
--contiguous Bool, --ignoreactivationskip, --ignoremonitoring, --major Number,
--metadataprofile String, --minor Number, --monitor Bool, --name String, --nosync,
--noudevsync, --permission Permission, --persistent Bool, --readahead Readahead,
--reportformat ReportFmt, --setactivationskip Bool, --wipesignatures Bool,
--zero Bool

OO_LVCREATE_CACHE: --cachemode CacheMode, --cachepolicy String, --cachesettings String,
--chunksize SizeKB

OO_LVCREATE_POOL: --poolmetadatasize SizeMB, --poolmetadataspare Bool, --chunksize SizeKB

OO_LVCREATE_THIN: --discards Discards, --errorwhenfull Bool

OO_LVCREATE_RAID: --mirrors SNumber, --stripes Number, --stripesize SizeKB,
--regionsize RegionSize, --minrecoveryrate SizeKB, --maxrecoveryrate SizeKB

---

lvcreate --type error --size SizeMB VG
OO: OO_LVCREATE
ID: lvcreate_error_vol
DESC: Create an LV that returns errors when used.
FLAGS: SECONDARY_SYNTAX

---

lvcreate --type zero --size SizeMB VG
OO: OO_LVCREATE
ID: lvcreate_zero_vol
DESC: Create an LV that returns zeros when read.
FLAGS: SECONDARY_SYNTAX

---

lvcreate --type linear --size SizeMB VG
OO: OO_LVCREATE
OP: PV ...
IO: --mirrors 0, --stripes 1
ID: lvcreate_linear
DESC: Create a linear LV.
FLAGS: SECONDARY_SYNTAX

lvcreate --size SizeMB VG
OO: --type linear, OO_LVCREATE
OP: PV ...
IO: --mirrors 0, --stripes 1
ID: lvcreate_linear
DESC: Create a linear LV.

---

lvcreate --type striped --size SizeMB VG
OO: --stripes Number, --stripesize SizeKB, OO_LVCREATE
OP: PV ...
ID: lvcreate_striped
DESC: Create a striped LV (also see lvcreate --stripes).
FLAGS: SECONDARY_SYNTAX

lvcreate --stripes Number --size SizeMB VG
OO: --type striped, --stripesize SizeKB, OO_LVCREATE
OP: PV ...
ID: lvcreate_striped
DESC: Create a striped LV (infers --type striped).

---

lvcreate --type mirror --size SizeMB VG
OO: --mirrors SNumber, --mirrorlog MirrorLog, --regionsize RegionSize, --stripes Number, OO_LVCREATE
OP: PV ...
ID: lvcreate_mirror
DESC: Create a mirror LV (also see --type raid1).
FLAGS: SECONDARY_SYNTAX

# alternate form of lvcreate --type raid1|mirror
lvcreate --mirrors SNumber --size SizeMB VG
OO: --type raid1, --type mirror, --mirrorlog MirrorLog, --stripes Number, OO_LVCREATE_RAID, OO_LVCREATE
OP: PV ...
ID: lvcreate_mirror_or_raid1
DESC: Create a raid1 or mirror LV (infers --type raid1|mirror).

---

lvcreate --type raid --size SizeMB VG
OO: OO_LVCREATE_RAID, OO_LVCREATE
OP: PV ...
ID: lvcreate_raid_any
DESC: Create a raid LV (a specific raid level must be used, e.g. raid1).

---

# The LV created by these commands actually has type linear or striped,
# not snapshot as specified by the command.  If LVs never have type
# snapshot, perhaps "snapshot" should not be considered an LV type, but
# another new LV property?

# alternate form of lvcreate --snapshot
lvcreate --type snapshot --size SizeMB LV
OO: --snapshot, --stripes Number, --stripesize SizeKB,
--chunksize SizeKB, OO_LVCREATE
OP: PV ...
ID: lvcreate_cow_snapshot
DESC: Create a COW snapshot LV of an origin LV
DESC: (also see --snapshot).
FLAGS: SECONDARY_SYNTAX

lvcreate --snapshot --size SizeMB LV
OO: --type snapshot, --stripes Number, --stripesize SizeKB,
--chunksize SizeKB, OO_LVCREATE
OP: PV ...
ID: lvcreate_cow_snapshot
DESC: Create a COW snapshot LV of an origin LV.

---

# alternate form of lvcreate --snapshot
lvcreate --type snapshot --size SizeMB --virtualsize SizeMB VG
OO: --snapshot, --chunksize SizeKB, OO_LVCREATE
OP: PV ...
ID: lvcreate_cow_snapshot_with_virtual_origin
DESC: Create a sparse COW snapshot LV of a virtual origin LV
DESC: (also see --snapshot).
FLAGS: SECONDARY_SYNTAX

lvcreate --snapshot --size SizeMB --virtualsize SizeMB VG
OO: --type snapshot, --chunksize SizeKB, OO_LVCREATE
OP: PV ...
ID: lvcreate_cow_snapshot_with_virtual_origin
DESC: Create a sparse COW snapshot LV of a virtual origin LV.
FLAGS: SECONDARY_SYNTAX

---

lvcreate --type thin-pool --size SizeMB VG
OO: --thinpool LV_new, OO_LVCREATE_POOL, OO_LVCREATE_THIN, OO_LVCREATE,
--stripes Number, --stripesize SizeKB
OP: PV ...
IO: --mirrors 0
ID: lvcreate_thinpool
DESC: Create a thin pool.

# alternate form of lvcreate --type thin-pool
lvcreate --thin --size SizeMB VG
OO: --type thin-pool, OO_LVCREATE_POOL, OO_LVCREATE_THIN, OO_LVCREATE,
--stripes Number, --stripesize SizeKB
OP: PV ...
IO: --mirrors 0
ID: lvcreate_thinpool
DESC: Create a thin pool (infers --type thin-pool).
FLAGS: SECONDARY_SYNTAX

# alternate form of lvcreate --type thin-pool
lvcreate --size SizeMB --thinpool LV_new VG
OO: --thin, --type thin-pool, OO_LVCREATE_POOL, OO_LVCREATE_THIN, OO_LVCREATE,
--stripes Number, --stripesize SizeKB
OP: PV ...
IO: --mirrors 0
ID: lvcreate_thinpool
DESC: Create a thin pool named by the --thinpool arg
DESC: (infers --type thin-pool).
FLAGS: SECONDARY_SYNTAX

---

# NB. there are no alternate forms of these commands that
# use --cache in place of --type cache-pool, but --cache
# still needs to be listed as an optional addition to
# --type cache-pool.

lvcreate --type cache-pool --size SizeMB VG
OO: --cache, OO_LVCREATE_POOL, OO_LVCREATE_CACHE, OO_LVCREATE
OP: PV ...
ID: lvcreate_cachepool
DESC: Create a cache pool.

# alternate form of lvcreate --type cache-pool
lvcreate --type cache-pool --size SizeMB --cachepool LV_new VG
OO: --cache, OO_LVCREATE_POOL, OO_LVCREATE_CACHE, OO_LVCREATE
OP: PV ...
ID: lvcreate_cachepool
DESC: Create a cache pool named by the --cachepool arg
DESC: (variant, uses --cachepool in place of --name).
FLAGS: SECONDARY_SYNTAX

---

lvcreate --type thin --virtualsize SizeMB --thinpool LV_thinpool VG
OO: --thin, OO_LVCREATE_POOL, OO_LVCREATE_THIN, OO_LVCREATE
IO: --mirrors 0
ID: lvcreate_thin_vol
DESC: Create a thin LV in a thin pool.
FLAGS: SECONDARY_SYNTAX

# alternate form of lvcreate --type thin
lvcreate --type thin --virtualsize SizeMB LV_thinpool
OO: --thin, OO_LVCREATE_THIN, OO_LVCREATE
IO: --mirrors 0
ID: lvcreate_thin_vol
DESC: Create a thin LV in a thin pool named in the first arg
DESC: (variant, also see --thinpool for naming pool).
FLAGS: SECONDARY_SYNTAX

# NB. this is the variant which can substitute
# --thin for --type thin, even though --thin is in OO.

# alternate form of lvcreate --type thin
lvcreate --virtualsize SizeMB --thinpool LV_thinpool VG
OO: --type thin, --thin, OO_LVCREATE_THIN, OO_LVCREATE
IO: --mirrors 0
ID: lvcreate_thin_vol
DESC: Create a thin LV in a thin pool (infers --type thin).

# alternate form of lvcreate --type thin
lvcreate --virtualsize SizeMB LV_thinpool
OO: --type thin, --thin, OO_LVCREATE_THIN, OO_LVCREATE
IO: --mirrors 0
ID: lvcreate_thin_vol
DESC: Create a thin LV in the thin pool named in the first arg
DESC: (variant, infers --type thin, also see --thinpool for
DESC: naming pool.)
FLAGS: SECONDARY_SYNTAX

---

lvcreate --type thin LV_thin
OO: --thin, OO_LVCREATE_THIN, OO_LVCREATE
IO: --mirrors 0
ID: lvcreate_thin_snapshot
DESC: Create a thin LV that is a snapshot of an existing thin LV.
FLAGS: SECONDARY_SYNTAX

# alternate form of lvcreate --type thin
lvcreate --thin LV_thin
OO: --type thin, OO_LVCREATE_THIN, OO_LVCREATE
IO: --mirrors 0
ID: lvcreate_thin_snapshot
DESC: Create a thin LV that is a snapshot of an existing thin LV
DESC: (infers --type thin).
FLAGS: SECONDARY_SYNTAX

# alternate form of lvcreate --type thin
lvcreate --snapshot LV_thin
OO: --type thin, OO_LVCREATE_THIN, OO_LVCREATE
IO: --mirrors 0
ID: lvcreate_thin_snapshot
DESC: Create a thin LV that is a snapshot of an existing thin LV
DESC: (infers --type thin).

lvcreate --type thin --thinpool LV_thinpool LV
OO: --thin, OO_LVCREATE_POOL, OO_LVCREATE_THIN, OO_LVCREATE
IO: --mirrors 0
ID: lvcreate_thin_snapshot_of_external
DESC: Create a thin LV that is a snapshot of an external origin LV.

# alternate form of lvcreate --type thin --thinpool LV_thinpool LV
lvcreate --snapshot --thinpool LV_thinpool LV
OO: --type thin, OO_LVCREATE_THIN, OO_LVCREATE
IO: --mirrors 0
ID: lvcreate_thin_snapshot_of_external
DESC: Create a thin LV that is a snapshot of an external origin LV
DESC: (infers --type thin).
FLAGS: SECONDARY_SYNTAX

---

# stripes option is not intuitive when creating a thin LV,
# but here it applies to creating the new thin pool that
# is used for the thin LV

# FIXME: there are commands here that differ only in that
# one takes LV_new in arg pos 1, and the other takes a VG name
# in arg pos 1.  The commands that take LV_new use that
# name as the new name of the pool, but the commands that
# take a VG automatically generate the LV name.  The problem
# is that currently the command matching function cannot
# distinguish between an LV name and a VG name being used
# in arg pos 1, so a user-entered command would just match
# the first it finds and not necessarily the correct
# definition.  Note that when LV_new is used in arg pos 1,
# it needs to include a VG name, i.e. VG/LV_new

lvcreate --type thin --virtualsize SizeMB --size SizeMB --thinpool LV_new
OO: --thin, OO_LVCREATE_POOL, OO_LVCREATE_THIN, OO_LVCREATE,
--stripes Number, --stripesize SizeKB
OP: PV ...
IO: --mirrors 0
ID: lvcreate_thin_vol_and_thinpool
DESC: Create a thin LV, first creating a thin pool for it,
DESC: where the new thin pool is named by the --thinpool arg.

# alternate form of lvcreate --type thin
lvcreate --thin --virtualsize SizeMB --size SizeMB --thinpool LV_new
OO: --type thin, OO_LVCREATE_POOL, OO_LVCREATE_THIN, OO_LVCREATE,
--stripes Number, --stripesize SizeKB
OP: PV ...
IO: --mirrors 0
ID: lvcreate_thin_vol_and_thinpool
DESC: Create a thin LV, first creating a thin pool for it,
DESC: where the new thin pool is named by the --thinpool arg
DESC: (variant, infers --type thin).
FLAGS: SECONDARY_SYNTAX

# alternate form of lvcreate --type thin
lvcreate --type thin --virtualsize SizeMB --size SizeMB LV_new|VG
OO: --thin, OO_LVCREATE_POOL, OO_LVCREATE_THIN, OO_LVCREATE,
--stripes Number, --stripesize SizeKB
OP: PV ...
IO: --mirrors 0
ID: lvcreate_thin_vol_and_thinpool
DESC: Create a thin LV, first creating a thin pool for it,
DESC: where the new thin pool is named in the first arg,
DESC: or the new thin pool name is generated when the first
DESC: arg is a VG name.
FLAGS: SECONDARY_SYNTAX

# alternate form of lvcreate --type thin
lvcreate --thin --virtualsize SizeMB --size SizeMB LV_new|VG
OO: --type thin, OO_LVCREATE_POOL, OO_LVCREATE_THIN, OO_LVCREATE,
--stripes Number, --stripesize SizeKB
OP: PV ...
IO: --mirrors 0
ID: lvcreate_thin_vol_and_thinpool
DESC: Create a thin LV, first creating a thin pool for it,
DESC: where the new thin pool is named in the first arg,
DESC: or the new thin pool name is generated when the first
DESC: arg is a VG name (variant, infers --type thin).
FLAGS: SECONDARY_SYNTAX

---

lvcreate --size SizeMB --virtualsize SizeMB VG
OO: --type thin, --type snapshot, --thin, --snapshot, OO_LVCREATE_POOL, OO_LVCREATE_THIN, OO_LVCREATE,
--stripes Number, --stripesize SizeKB
OP: PV ...
IO: --mirrors 0
ID: lvcreate_thin_vol_with_thinpool_or_sparse_snapshot
DESC: Create a thin LV, first creating a thin pool for it
DESC: (infers --type thin).
DESC: Create a sparse snapshot of a virtual origin LV
DESC: (infers --type snapshot).
DESC: Chooses --type thin or --type snapshot according to
DESC: config setting sparse_segtype_default.
FLAGS: SECONDARY_SYNTAX

---

# stripes option is not intuitive when creating a cache LV,
# but here it applies to creating the new origin that
# is used to create the cache LV

lvcreate --type cache --size SizeMB --cachepool LV_cachepool VG
OO: --cache, OO_LVCREATE_POOL, OO_LVCREATE_CACHE, OO_LVCREATE,
--stripes Number, --stripesize SizeKB
OP: PV ...
ID: lvcreate_cache_vol_with_new_origin
DESC: Create a cache LV, first creating a new origin LV,
DESC: then combining it with the existing cache pool named
DESC: by the --cachepool arg.

# alternate form of lvcreate --type cache
lvcreate --size SizeMB --cachepool LV_cachepool VG
OO: --type cache, --cache, OO_LVCREATE_CACHE, OO_LVCREATE,
--stripes Number, --stripesize SizeKB
OP: PV ...
ID: lvcreate_cache_vol_with_new_origin
DESC: Create a cache LV, first creating a new origin LV,
DESC: then combining it with the existing cache pool named
DESC: by the --cachepool arg (variant, infers --type cache).
FLAGS: SECONDARY_SYNTAX

# alternate form of lvcreate --type cache
lvcreate --type cache --size SizeMB LV_cachepool
OO: --cache, OO_LVCREATE_POOL, OO_LVCREATE_CACHE, OO_LVCREATE,
--stripes Number, --stripesize SizeKB
OP: PV ...
ID: lvcreate_cache_vol_with_new_origin
DESC: Create a cache LV, first creating a new origin LV,
DESC: then combining it with the existing cache pool named
DESC: in the first arg (variant, also use --cachepool).
FLAGS: SECONDARY_SYNTAX

# This is a ridiculously crazy command which nobody could
# understand.  It should be be eliminated.  It does two different
# things depending on whether LV in pos 1 is a cachepool LV
# or not.  Both variations are unnecessary.
#
# 1. If LV is a cachepool, then it's an alternate form of
#    an already complicated command above.
#
# # alternate form for lvcreate_cache_vol_with_new_origin
# lvcreate --cache --size SizeMB LV_cachepool
# OO: --type cache, --cache, OO_LVCREATE_CACHE, OO_LVCREATE, --stripes Number, --stripesize SizeKB
# OP: PV ...
# ID: lvcreate_cache_vol_with_new_origin
# DESC: Create a cache LV, first creating a new origin LV,
# DESC: then combining it with the existing cache pool named
# DESC: in the first arg (variant, infers --type cache,
# DESC: also use --cachepool).
#
# 2. If LV is not a cachepool, then it's a disguised lvconvert.
#
# # FIXME: this should be done by lvconvert, and this command removed
# lvcreate --type cache --size SizeMB LV
# OO: OO_LVCREATE_POOL, OO_LVCREATE_CACHE, OO_LVCREATE
# OP: PV ...
# ID: lvcreate_convert_to_cache_vol_with_cachepool
# DESC: Convert the specified LV to type cache after creating a new
# DESC: cache pool LV to use (use lvconvert).
#
# Note that stripes are accepted by the first and not by the
# second, but it's not possible to validate this until after
# the LV type is known.
#
# So, to define this syntax we have to combine both of
# those variants, each crazy on it's own, into one
# ridiculous command.

# def1: alternate form of lvcreate --type cache, or
# def2: it should be done by lvconvert.
lvcreate --cache --size SizeMB LV
OO: OO_LVCREATE_CACHE, OO_LVCREATE_POOL, OO_LVCREATE,
--stripes Number, --stripesize SizeKB
OP: PV ...
ID: lvcreate_cache_vol_with_new_origin_or_convert_to_cache_vol_with_cachepool
DESC: When LV is a cache pool, create a cache LV,
DESC: first creating a new origin LV, then combining it with
DESC: the existing cache pool named in the first arg
DESC: (variant, infers --type cache, also use --cachepool).
DESC: When LV is not a cache pool, convert the specified LV
DESC: to type cache after creating a new cache pool LV to use
DESC: (use lvconvert).
FLAGS: SECONDARY_SYNTAX

---

lvdisplay
OO: --aligned, --all, --binary, --colon, --columns,
--configreport ConfigReport, --foreign, --history, --ignorelockingfailure,
--ignoreskippedcluster, --logonly, --maps, --noheadings,
--nosuffix, --options String, --sort String, --partial, --readonly,
--reportformat ReportFmt, --segments, --select String, --separator String,
--shared, --unbuffered, --units Units
OP: VG|LV|Tag ...
ID: lvdisplay_general

---

# --type is an option in lvextend/lvresize only so that the specified type
# value can be checked to match the existing type; using it doesn't
# currently enable any different behavior.

# --extents is not specified; it's an automatic alternative for --size

lvextend --size PSizeMB LV
OO: --alloc Alloc, --autobackup Bool, --force, --mirrors SNumber,
--nofsck, --nosync, --noudevsync, --reportformat ReportFmt, --resizefs,
--stripes Number, --stripesize SizeKB, --poolmetadatasize PSizeMB,
--type SegType
OP: PV ...
ID: lvextend_by_size
DESC: Extend an LV by a specified size.

lvextend LV PV ...
OO: --alloc Alloc, --autobackup Bool, --force, --mirrors SNumber,
--nofsck, --nosync, --noudevsync,
--reportformat ReportFmt, --resizefs, --stripes Number, --stripesize SizeKB,
--type SegType
ID: lvextend_by_pv
DESC: Extend an LV by specified PV extents.

lvextend --poolmetadatasize PSizeMB LV_thinpool
OO: --alloc Alloc, --autobackup Bool, --force, --mirrors SNumber,
--nofsck, --nosync, --noudevsync,
--reportformat ReportFmt, --stripes Number, --stripesize SizeKB,
--type SegType
OP: PV ...
ID: lvextend_pool_metadata_by_size
DESC: Extend a pool metadata SubLV by a specified size.

lvextend --usepolicies LV_thinpool_snapshot
OO: --alloc Alloc, --autobackup Bool, --force, --mirrors SNumber,
--nofsck, --nosync, --noudevsync,
--reportformat ReportFmt, --resizefs,
--type SegType
OP: PV ...
ID: lvextend_by_policy
DESC: Extend an LV according to a predefined policy.

---

lvmconfig
OO: OO_CONFIG
OP: String ...
ID: lvmconfig_general

---

lvreduce --size NSizeMB LV
OO: --autobackup Bool, --force, --nofsck, --noudevsync,
--reportformat ReportFmt, --resizefs
ID: lvreduce_general

---

lvremove VG|LV|Tag|Select ...
OO: --autobackup Bool, --force, --nohistory, --noudevsync,
--reportformat ReportFmt, --select String
ID: lvremove_general

---

lvrename VG LV LV_new
OO: --autobackup Bool, --noudevsync, --reportformat ReportFmt
ID: lvrename_vg_lv_lv

lvrename LV LV_new
OO: --autobackup Bool, --noudevsync, --reportformat ReportFmt
ID: lvrename_lv_lv

---

# --type is an option in lvextend/lvresize only so that the specified type
# value can be checked to match the existing type; using it doesn't
# currently enable any different behavior.

lvresize --size SSizeMB LV
OO: --alloc Alloc, --autobackup Bool, --force,
--nofsck, --nosync, --noudevsync, --reportformat ReportFmt, --resizefs,
--stripes Number, --stripesize SizeKB, --poolmetadatasize PSizeMB,
--type SegType
OP: PV ...
ID: lvresize_by_size
DESC: Resize an LV by a specified size.

lvresize LV PV ...
OO: --alloc Alloc, --autobackup Bool, --force,
--nofsck, --nosync, --noudevsync,
--reportformat ReportFmt, --resizefs, --stripes Number, --stripesize SizeKB,
--type SegType
ID: lvresize_by_pv
DESC: Resize an LV by specified PV extents.

lvresize --poolmetadatasize PSizeMB LV_thinpool
OO: --alloc Alloc, --autobackup Bool, --force,
--nofsck, --nosync, --noudevsync,
--reportformat ReportFmt, --stripes Number, --stripesize SizeKB,
--type SegType
OP: PV ...
ID: lvresize_pool_metadata_by_size
DESC: Resize a pool metadata SubLV by a specified size.

---

lvs
OO: --history, --segments, OO_REPORT
OP: VG|LV|Tag ...
ID: lvs_general

---

lvscan
OO: --all, --blockdevice, --ignorelockingfailure, --partial,
--readonly, --reportformat ReportFmt
ID: lvscan_general

lvscan --cache_long
OO: --blockdevice, --ignorelockingfailure, --partial,
--readonly, --reportformat ReportFmt
OP: LV ...
ID: lvscan_cache

---

# None of these can function as a required option for pvchange.
OO_PVCHANGE: --autobackup Bool, --force, --ignoreskippedcluster,
--reportformat ReportFmt, --uuid

# Any of these can function as a required option for pvchange.
OO_PVCHANGE_META: --allocatable Bool, --addtag Tag, --deltag Tag,
--uuid, --metadataignore Bool

pvchange OO_PVCHANGE_META --all
OO: OO_PVCHANGE
ID: pvchange_properties_all
DESC: Change properties of all PVs.

pvchange OO_PVCHANGE_META PV|Select ...
OO: --select String, OO_PVCHANGE
ID: pvchange_properties_some
DESC: Change properties of specified PVs.

---

pvresize PV ...
OO: --setphysicalvolumesize SizeMB, --reportformat ReportFmt
ID: pvresize_general

---

pvck PV ...
OO: --labelsector Number
ID: pvck_general

---

# Use --uuidstr here which will be converted to uuidstr_ARG
# which is actually --uuid string on the command line.

pvcreate PV ...
OO: --dataalignment SizeKB, --dataalignmentoffset SizeKB, --bootloaderareasize SizeMB,
--force, --labelsector Number, --metadatatype MetadataType,
--pvmetadatacopies MetadataCopiesPV, --metadatasize SizeMB,
--metadataignore Bool, --norestorefile, --setphysicalvolumesize SizeMB,
--reportformat ReportFmt, --restorefile String, --uuidstr String, --zero Bool
ID: pvcreate_general

---

pvdisplay
OO: --aligned, --all, --binary, --colon, --columns, --configreport ConfigReport,
--foreign, --ignorelockingfailure, --ignoreskippedcluster,
--logonly, --maps, --noheadings, --nosuffix, --options String,
--readonly, --reportformat ReportFmt, --select String, --separator String, --shared,
--short, --sort String, --unbuffered, --units Units
OP: PV|Tag ...
ID: pvdisplay_general

---

pvmove PV
OO: --abort, --alloc Alloc, --atomic, --autobackup Bool, --background,
--interval Number, --name LV, --noudevsync, --reportformat ReportFmt
OP: PV ...
ID: pvmove_one
DESC: Move PV extents.

pvmove
OO: --abort, --background, --interval Number
ID: pvmove_any
DESC: Continue or abort existing pvmove operations.

---

pvremove PV ...
OO: --force, --reportformat ReportFmt
ID: pvremove_general

---

pvs
OO: --segments, OO_REPORT
OP: PV|Tag ...
ID: pvs_general

---

pvscan
OO: --ignorelockingfailure, --reportformat ReportFmt, --exported, --novolumegroup,
--short, --uuid
ID: pvscan_show
DESC: Display PV information.

pvscan --cache_long
OO: --ignorelockingfailure, --reportformat ReportFmt, --background,
--activate Active, --major Number, --minor Number
OP: PV|String ...
ID: pvscan_cache
DESC: Populate the lvmetad cache by scanning PVs.

---

vgcfgbackup
OO: --file String, --foreign, --ignorelockingfailure, --partial, --readonly,
--reportformat ReportFmt
OP: VG ...
ID: vgcfgbackup_general

---

OO_VGCFGRESTORE: --force_long, --metadatatype MetadataType

vgcfgrestore VG
OO: OO_VGCFGRESTORE
ID: vgcfgrestore_by_vg
DESC: Restore VG metadata from last backup.

vgcfgrestore --file String VG
OO: OO_VGCFGRESTORE
ID: vgcfgrestore_by_file
DESC: Restore VG metadata from specified file.

vgcfgrestore --list VG
OO: OO_VGCFGRESTORE
ID: vgcfgrestore_list_by_vg
DESC: List all VG metadata backups.

# FIXME: the optional VG pos arg is not used or checked and can be
# anything, but a test in the test suite uses it.  Fix the test or
# verify that the positional VG is correct?

vgcfgrestore --list --file String
OO: OO_VGCFGRESTORE
OP: VG
ID: vgcfgrestore_list_by_file
DESC: List one VG metadata backup file.

---

# None of these can function as a required option for vgchange.

OO_VGCHANGE: --autobackup Bool, --ignoremonitoring, --ignoreskippedcluster,
--noudevsync, --reportformat ReportFmt, --select String, --force

# Any of these can function as a required option for vgchange.
# profile is also part of OO_ALL, but is repeated in OO_VGCHANGE_META
# because it can function as a required opt.

OO_VGCHANGE_META: --addtag Tag, --deltag Tag,
--logicalvolume Uint32, --maxphysicalvolumes Uint32, --alloc Alloc, --uuid,
--clustered Bool, --pvmetadatacopies MetadataCopiesPV, --vgmetadatacopies MetadataCopiesVG,
--physicalextentsize SizeMB, --resizeable Bool, --systemid String, --locktype LockType,
--profile String, --detachprofile, --metadataprofile String

vgchange OO_VGCHANGE_META
OO: OO_VGCHANGE
OP: VG|Tag|Select ...
ID: vgchange_properties
DESC: Change a general VG attribute.
DESC: For options listed in parentheses, any one is
DESC: required, after which the others are optional.

vgchange --monitor Bool
OO: --sysinit, --ignorelockingfailure, --poll Bool, OO_VGCHANGE
OP: VG|Tag|Select ...
ID: vgchange_monitor
DESC: Start or stop monitoring LVs from dmeventd.

vgchange --poll Bool
OO: --ignorelockingfailure, OO_VGCHANGE
OP: VG|Tag|Select ...
ID: vgchange_poll
DESC: Start or stop processing LV conversions.

vgchange --activate Active
OO: --activationmode ActivationMode, --ignoreactivationskip, --partial, --sysinit,
--ignorelockingfailure, --monitor Bool, --poll Bool, OO_VGCHANGE
OP: VG|Tag|Select ...
ID: vgchange_activate
DESC: Activate or deactivate LVs.

vgchange --refresh
OO: --sysinit, --ignorelockingfailure, --monitor Bool, --poll Bool, OO_VGCHANGE
OP: VG|Tag|Select ...
ID: vgchange_refresh
DESC: Reactivate LVs using the latest metadata.

vgchange --lockstart
OO: --lockopt String, OO_VGCHANGE
OP: VG|Tag|Select ...
ID: vgchange_lockstart
DESC: Start the lockspace of a shared VG in lvmlockd.

vgchange --lockstop
OO: --lockopt String, OO_VGCHANGE
OP: VG|Tag|Select ...
ID: vgchange_lockstop
DESC: Stop the lockspace of a shared VG in lvmlockd.

---

vgck
OO: --reportformat ReportFmt
OP: VG|Tag ...
ID: vgck_general

---

vgconvert VG ...
OO: --force, --labelsector Number, --bootloaderareasize SizeMB,
--metadatatype MetadataType, --pvmetadatacopies MetadataCopiesPV,
--metadatasize SizeMB, --reportformat ReportFmt
ID: vgconvert_general

---

vgcreate VG_new PV ...
OO: --addtag Tag, --alloc Alloc, --autobackup Bool, --clustered Bool, --maxlogicalvolumes Uint32,
--maxphysicalvolumes Uint32, --metadataprofile String, --metadatatype MetadataType,
--physicalextentsize SizeMB, --force, --zero Bool, --labelsector Number,
--metadatasize SizeMB, --pvmetadatacopies MetadataCopiesPV, --vgmetadatacopies MetadataCopiesVG,
--reportformat ReportFmt, --dataalignment SizeKB, --dataalignmentoffset SizeKB,
--shared, --systemid String, --locktype LockType, --lockopt String
ID: vgcreate_general

---

vgdisplay
OO: --activevolumegroups, --aligned, --binary, --colon, --columns,
--configreport ConfigReport, --foreign, --ignorelockingfailure,
--ignoreskippedcluster, --logonly, --noheadings, --nosuffix,
--options String, --partial, --readonly, --reportformat ReportFmt, --select String,
--shared, --short, --separator String, --sort String, --unbuffered, --units Units
OP: VG|Tag ...
ID: vgdisplay_general

---

OO_VGEXPORT: --reportformat ReportFmt

vgexport VG|Tag|Select ...
OO: --select String, OO_VGEXPORT
ID: vgexport_some
DESC: Export specified VGs.

vgexport --all
OO: OO_VGEXPORT
ID: vgexport_all
DESC: Export all VGs.

---

vgextend VG PV ...
OO: --autobackup Bool,
--force, --zero Bool, --labelsector Number, --metadatatype MetadataType,
--metadatasize SizeMB, --pvmetadatacopies MetadataCopiesPV,
--metadataignore Bool, --dataalignment SizeKB, --dataalignmentoffset SizeKB,
--reportformat ReportFmt, --restoremissing
ID: vgextend_general

---

OO_VGIMPORT: --force, --reportformat ReportFmt

vgimport VG|Tag|Select ...
OO: --select String, OO_VGIMPORT
ID: vgimport_some
DESC: Import specified VGs.

vgimport --all
OO: OO_VGIMPORT
ID: vgimport_all
DESC: Import all VGs.

---

vgimportclone PV ...
OO: --basevgname VG, --import
ID: vgimportclone_general

---

vgmerge VG VG
OO: --autobackup Bool, --list
ID: vgmerge_general

---

vgmknodes
OO: --ignorelockingfailure, --refresh, --reportformat ReportFmt
OP: VG|LV|Tag ...
ID: vgmknodes_general

---

OO_VGREDUCE: --autobackup Bool, --force, --reportformat ReportFmt

vgreduce VG PV ...
OO: OO_VGREDUCE
ID: vgreduce_by_pv
DESC: Remove a PV from a VG.

vgreduce --all VG
OO: OO_VGREDUCE
ID: vgreduce_all
DESC: Remove all unused PVs from a VG.

vgreduce --removemissing VG
OO: --mirrorsonly, OO_VGREDUCE
ID: vgreduce_missing
DESC: Remove all missing PVs from a VG.

---

vgremove VG|Tag|Select ...
OO: --force, --noudevsync, --reportformat ReportFmt, --select String
ID: vgremove_general

---

vgrename VG VG_new
OO: --autobackup Bool, --force, --reportformat ReportFmt
ID: vgrename_by_name
DESC: Rename a VG.

vgrename String VG_new
OO: --autobackup Bool, --force, --reportformat ReportFmt
ID: vgrename_by_uuid
DESC: Rename a VG by specifying the VG UUID.

---

vgs
OO: OO_REPORT
OP: VG|Tag ...
ID: vgs_general

---

vgscan
OO: --cache_long, --ignorelockingfailure, --mknodes, --notifydbus,
--partial, --reportformat ReportFmt
ID: vgscan_general

---

OO_VGSPLIT: --autobackup Bool

# used only when the destination VG is new
OO_VGSPLIT_NEW: --alloc Alloc, --clustered Bool,
--maxlogicalvolumes Uint32, --maxphysicalvolumes Uint32,
--metadatatype MetadataType, --vgmetadatacopies MetadataCopiesVG

vgsplit VG VG PV ...
OO: OO_VGSPLIT, OO_VGSPLIT_NEW
ID: vgsplit_by_pv
DESC: Split a VG by specified PVs.

vgsplit --name LV VG VG
OO: OO_VGSPLIT, OO_VGSPLIT_NEW
ID: vgsplit_by_lv
DESC: Split a VG by PVs in a specified LV.

---

# built-in and deprecated commands

# use lvmconfig
config
OO: OO_CONFIG
OP: String ...
ID: lvmconfig_general

# use lvmconfig
dumpconfig
OO: OO_CONFIG
OP: String ...
ID: lvmconfig_general

devtypes
OO: --aligned, --binary, --nameprefixes, --noheadings,
--nosuffix, --options String, --reportformat ReportFmt, --rows,
--select String, --separator String, --sort String, --unbuffered, --unquoted
ID: devtypes_general

fullreport
OO: OO_REPORT
OP: VG ...
ID: fullreport_general

lastlog
OO: --reportformat ReportFmt, --select String
ID: lastlog_general

lvpoll --polloperation PollOp LV ...
OO: --abort, --autobackup Bool, --handlemissingpvs, --interval Number
ID: lvpoll_general

formats
ID: formats_general

help
OP: String ...
ID: help_general

version
ID: version_general

# deprecated
pvdata
ID: pvdata_general

segtypes
ID: segtypes_general

systemid
ID: systemid_general

tags
ID: tags_general

# deprecated
lvmchange
ID: lvmchange_general

# deprecated
lvmdiskscan
OO: --lvmpartition, --readonly
ID: lvmdiskscan_general

# deprecated
lvmsadc
ID: lvmsadc_general

# deprecated
lvmsar
OO: --full, --stdin
ID: lvmsar_general