IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Let's only print if the commit isn't already partial; this
addresses a spam of "marking commit partial" from fsck.
Closes: #1548
Approved by: cgwalters
It seems like 240 retries is just not long enough for all the
non-destructive tests running in parallel to finish. Let's crank that up
to 500 retries.
Closes: #1548
Approved by: cgwalters
This took a whole lot of experimentation. I hit upon the idea
of doing a `systemctl stop sshd` to avoid the situation where we
might ssh back into the system while it's in the process of shutting
down.
Ultimately the other fix is disabling `ControlMaster`; see
for example: https://github.com/ansible/ansible/issues/17935Closes: #1548
Approved by: cgwalters
Currently the create-usb command only generates a summary file in the
destination repo if one doesn't already exist, which means if one does
exist it becomes out of date after the new refs are pulled. This commit
makes ostree regenerate the summary regardless of whether it exists, so
that consumers such as ostree_repo_find_remotes_async() (and at a higher
level, GNOME Software) get an accurate picture of the refs available on
the mount. This commit also updates one of the unit tests to check that
the summary is accurate after a second pull into the same repo.
Since any user of the create-usb command is using collection IDs they
are new enough to be using the unsigned summary support. While it would
technically be possible to use summary signatures on a repo and use the
create-usb command on it (a scenario broken by this commit), the
create-usb command is designed for P2P distribution of refs, which
requires use of unsigned summary support. So this is a legitimate
narrowing of the tool.
Fixes https://github.com/ostreedev/ostree/issues/1465Closes: #1543
Approved by: cgwalters
This is a normal case when running unit tests in client code
on continuous integration infrastructure. When those tests are
running they will set G_DEBUG=fatal-warnings which will cause
the program to abort if a warning is emitted. Instead, emit
a debug message if the problem was that we couldn't connect to
the daemon.
Closes: #1542
Approved by: jlebon
Followup to: https://github.com/ostreedev/ostree/pull/1503
After starting some more work on on this in rpm-ostree, it is
actually simpler if the staged deployment just shows up in the list.
It's effectively opt-in today; down the line we may make it the default,
but I worry about breaking things that e.g. assume they can mutate
the deployment before rebooting and have `/etc` already merged.
There's not that many things in libostree that iterate over the deployment
list. The biggest change here is around the
`ostree_sysroot_write_deployments_with_options` API. I initially
tried hard to support a use case like "push a rollback" while retaining
the staged deployment, but everything gets very messy because that
function truly is operating on the bootloader list.
For now what I settled on is to just discard the staged deployment;
down the line we can enhance things.
Where we then have some new gymnastics is around implementing
the finalization; we need to go to some effort to pull the staged
deployment out of the list and mark it as unstaged, and then pass
it down to `write_deployments()`.
Closes: #1539
Approved by: jlebon
This means we can later use various operations to heal the repository
because ostree does not assume all objects are there.
This the begining of a fix for https://github.com/ostreedev/ostree/pull/345Closes: #1533
Approved by: cgwalters
This is a version of ostree_repo_traverse_commit_union that also
remembers where the objects came from, by recording the parent
relationships in a hashtable. This can be used to later find which
commits each object was from, which we want to use in fsck.
Closes: #1533
Approved by: cgwalters
reintroduce the feature that was reverted with commit:
28c7bc6d0e
Differently than the original implementation, now we don't attempt any
test for reflinks support on the parent repository, since the test
requires write access to the repository.
Additionally, also check that the two repositories are on the same
device before attempting any reflink.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Closes: #1525
Approved by: cgwalters
If we're running as pid1, avoid printing anything in the normal
success paths as we don't want to affect the physical console by
default; the device may be using a splash screen, etc.
Also cleanup the code a bit to use a single variable
`running_as_pid1`, declare-and-initialize, use the
`bool` type, etc.
Closes: #1531
Approved by: jlebon
In prep for staging work, where we'll need to load the origin
for the staged deployment too.
The function was previously trying to avoid operating on an
instantiated deployment, but the data we need is in the deployment
object at that point.
Closes: #1538
Approved by: jlebon
Prep for handling staged deployments better; if we're not passed
the staged one back, then we just want to delete it but not
touch the bootloader config.
Closes: #1538
Approved by: jlebon
The reason we were returning a hashtable is a bit lost to history,
there's no reason to do so now anyways. Also port to declare-and-initialize
style and add more comments.
Closes: #1538
Approved by: jlebon
Add API to write a deployment state to `/run/ostree/staged-deployment`,
along with a systemd service which runs at shutdown time.
This is a big change to the ostree model for hosts,
but it closes a longstanding set of bugs; many, many people have
hit the "losing changes in /etc" problem. It also avoids
the other problem of racing with programs that modify `/etc`
such as LVM backups:
https://bugzilla.redhat.com/show_bug.cgi?id=1365297
We need this in particular to go to a full-on model for
automatically updated host systems where (like a dual-partition model)
everything is fully prepared and the reboot can be taken
asynchronously.
Closes: https://github.com/ostreedev/ostree/issues/545Closes: #1503
Approved by: jlebon
Somehow, this slipped through in #1513. We weren't inheriting anymore,
so `branches` defaulted back to just `master`. This means we weren't
gating on most of the containerized builds anymore. Ouch!
It'd make sense to teach PAPR to allow some defaults across all
testsuites, even in the `inherit: false` case. Though it's tempting to
also just change the hardcoded PAPR default to those branches since our
use of Homu + PAPR at this point is pretty ubiquitous, and it doesn't
really hurt for the ones that don't use it.
Closes: #1536
Approved by: cgwalters
A newly created archive-mode repository won't have a uncompressed-objects-cache
directory, and uncompressed_objects_dir is -1 to flag that. The special meaning of
-1 meaning "cwd" for libglnx means that the current directory was scanned as
if it was an objects directory, producing unexpected results, especially if there
were any two-letter files/subdirs in the current directory.
Closes: #1537
Approved by: jlebon
Add a "hidden command" flag, and use it for `admin instutil` since
I regret adding it, and people should be using the API.
Prep for adding another hidden command as part of staging deployments.
(Down the line we should investigate deduplicating the recursive
command parsing code)
Closes: #1535
Approved by: jlebon
Let's be opinionated now, and our installed/ test story *is*
Ansible/STR. Merge `tests/fedora-str` into `tests/installed/`.
Rework the nondestructive tests into a separate playbook run, and parallelize
them for more efficiency.
The destructive tests are also changed to use Ansible more.
Add a higher level `run.sh` entrypoint and update the `README.md`
with some useful tips.
Closes: #1513
Approved by: jlebon
Currently OstreeRepoFinderResult, a data structure used by pull code
that supports P2P operations, has a hash table mapping refs to checksums
but doesn't include timestamp information. This means that clients have
no way of knowing just from the OstreeRepoFinderResult information if a
commit being offered by a peer remote is an update or downgrade until
they start pulling it. The client could check the summary or the commit
metadata for the timestamps, but this requires adding the temporary
remotes to the repo config, and ostree is already checking timestamps
before returning the results, so I think it makes more sense for them to
be returned rather than leaving it to the client. This limitation is
especially important for offline computers, because for online computers
the latest commit available from any remote is the latest commit,
period.
This commit adds a "ref_to_timestamp" hash table to
OstreeRepoFinderResult that is symmetric to "ref_to_checksum" in that it
shares the same keys. This is an API break, but it's part of the
experimental API, and none of the current users of that (flatpak,
eos-updater, and gnome-software) are affected. See the documentation for
more details on "ref_to_timestamp". One thing to note is the data
structure currently gets initialized in find_remotes_cb(), so only users
of ostree_repo_find_remotes_async() will get them, not users of, say,
ostree_repo_finder_resolve_all_async(). This is because the individual
OstreeRepoFinder implementations don't currently access the timestamps
(but I think this could be changed in the future if there's a need).
This commit will allow P2P support to be added to
flatpak_installation_list_installed_refs_for_update, which will allow
GNOME Software to update apps from USB drives while offline (it's
already possible online).
Closes: #1518
Approved by: cgwalters
In case of some kind of race or other weirdness we might be getting
non-matching versions of summary.sig and summary, where summary.sig
is the latest version. Currently we're saving them to the cache
directly after downloading them successfully, but they will then fail
to gpg validate. Then on the next run we'll keep using the cached files
even if they are incorrect, until summary.sig changes upstream.
This changes the order so that we verify the signatures before saving
to the cache, thus ensuring that we don't end up in a stuck state.
Fixes https://github.com/ostreedev/ostree/issues/1523Closes: #1529
Approved by: cgwalters
In ostree_repo_remote_fetch_summary_with_options(), if no summary is
found on the server and summary verification is enabled, the error
message implies that it's the summary signature that's missing, which is
misleading. This commit adds a more specific error message for the case
of a missing summary, which has the side effect of explicitly checking
for the case that signatures != NULL && summary == NULL after
repo_remote_fetch_summary(), even though that should never happen.
One effect of this is that if you run "flatpak remote-add" with an
incorrect URL you get a more helpful error message, and similarly for
other flatpak operations and other users of ostree.
Closes: #1522
Approved by: cgwalters
In libostree, the phrase "commit metadata" has two meanings-- one is the
first dictionary in a commit GVariant that stores metadata such as ref
bindings, and the other is the commit metadata in the summary file,
which stores the commit size, checksum, and timestamp. In
find_remotes_process_refs(), the entire commit GVariant was being
referred to as commit metadata, so this commit changes the variable
name and a comment to make things more consistent.
Closes: #1528
Approved by: cgwalters
In _try_clone_from_payload_link, don't try to do the clone in the
parent repo, because we don't want to modify that. parent repos are
typically used when you want a shared, immutable base.
For example in flatpak, the parent repo is the system repo which you
don't have write access to, so any modification to it will fail with
EACCES, making it impossible to install via the system helper.
Closes: #1524
Approved by: cgwalters
Ostree uses the OtChecksum data structure as a wrapper around GChecksum
(depending on what libraries are available at compile time). According
to the docs for g_checksum_get_digest(), a GChecksum value can no longer
be updated after that function is called. Ostree enforces this by
setting "initialized" to FALSE after getting the digest, but this leads
to ot_checksum_clear() avoiding freeing any memory, leading to leaks. So
this commit adds a "closed" value that gets set when getting a digest
and checked when updating the value, so the initialized value can be
used only for memory management.
Closes: #1521
Approved by: jlebon
ostree_repo_pull_from_remotes_async() passes along some options to
ostree_repo_pull_with_options(), so document them.
Closes: #1519
Approved by: cgwalters
The `ostree show` command is currently failing due to incorrect syntax,
but we want to check that it fails because the metadata isn't there.
Closes: #1520
Approved by: cgwalters
I broke this in 9b55aaea6f
I'd obviously tested *setting* it locally worked, but I didn't test that
not having it set ran all the tests.
I don't understand why we were doing the `+ ` pattern before; let's
just check if it's empty.
Closes: #1516
Approved by: jlebon
The main blocker for doing this before was the `goto out` handling
for remounting `/boot`. Handle that by factoring out the bits that
require it to a helper function, and do the C/GError equivalent of
"try/finally".
Not prep for anything right now, just decided to do this since I had the file
open.
Closes: #1515
Approved by: jlebon
For staged deploy, we want to pay the cost of creating copies from
`/usr/etc` → `/etc` at stage time, since it can be expensive. (We
want to minimize time spent during shutdown).
Split it up into two functions; the logic is also simply clearer.
Closes: #1514
Approved by: jlebon
Prep for deployment staging. We had the code to hande "explicit kargs" in one
place, but the "use merge deployment" karg bits mixed in with the "/etc merge"
logic. Those are separate things, and it's better to have karg handling in one
place.
Closes: #1514
Approved by: jlebon
A quick turnaround to include one PR: https://github.com/ostreedev/ostree/pull/1508
"switchroot: Ensure /run/ostree-booted is created even without initramfs"
This fixes ostree when booting without an initramfs. Thanks to @akiernan for the
bug report and helping review the fix! I'm working on enhancing
the test suite, which will help in adding some coverage here.
Also for this release I'm going to avoid adding a "stub" symbol section
to the `-released.sym` file; I don't believe it's necessary.
Closes: #1512
Approved by: jlebon
See https://mail.gnome.org/archives/ostree-list/2018-March/msg00012.html
If ostree-prepare-root is run as pid 1 (i.e we're not using an initramfs), then
anything we write outside the target sysroot (such as `/run/ostree-booted`) will
be lost.
Since `ostree-remount.service` runs fairly early in boot, and is triggered via
`ConditionKernelCommandLine=ostree`, we can just touch the file there in
addition.
Closes: #1508
Approved by: akiernan
We were previously assuming that the host content had duplicates,
which...hopefully it doesn't! We shouldn't rely on that.
Also this test is slow in production and flaky. Let's just test
a single duplicate object.
Closes: #1509
Approved by: jlebon
Support e.g. `-e tests=payload-link`, to choose specific tests for more rapid
iteration, and allow skipping tmpdir cleanup to be able to debug.
Closes: #1509
Approved by: jlebon
This is prep for splitting off "nondestructive" tests which
we can run in parallel from the destructive/invasive ones which
e.g. change the host refspec, do deployments.
The `cd` invocation in `prepare_tmpdir` wasn't working because we were running
it in a subshell. Fix this by dropping the subshell.
Closes: #1509
Approved by: jlebon
