IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This is a follow-up to https://github.com/ostreedev/ostree/pull/1097.
We make simple_write_deployment smart enough so that it can be used for
rpm-ostree's purposes. This is mostly an upstreaming of logic that
already existed there.
Notably we correctly append NOT_DEFAULT deployments *after* the booted
deployment and we now support RETAIN_PENDING and RETAIN_ROLLBACK flags
to have more granularity on deployment pruning.
Expose these new flags on the CLI using new options (as well as expose
the previously existing NOT_DEFAULT flag as --not-as-default).
I couldn't add tests for --retain-pending because the merge deployment
is always the topmost one. Though I did check that it worked in a VM.
Closes: #1110
Approved by: cgwalters
See: http://marc.info/?l=linux-fsdevel&m=149520244919284&w=2
XFS doesn't flush the journal on `syncfs()`. GRUB doesn't know how to follow the
XFS journal, so if the filesystem is in a dirty state (possible with xfs
`/boot`, extremely likely with `/`, if the journaled data includes content for
`/boot`, the system may be unbootable if a system crash occurs.
Fix this by doing a `FIFREEZE`+`FITHAW` cycle. Now, most people
probably would have replaced the `syncfs()` invocation with those two
ioctls. But this would have become (I believe) the *only* place in
libostree where we weren't safe against interruption. The failure
mode would be ugly; nothing else would be able to write to the filesystem
until manual intervention.
The real fix here I think is to land an atomic `FIFREEZETHAW` ioctl
in the kernel. I might try a patch.
In the meantime though, let's jump through some hoops and set up
a "watchdog" child process that acts as a fallback unfreezer.
Closes: https://github.com/ostreedev/ostree/issues/876Closes: #1049
Approved by: jlebon
(Note this PR was reverted in <https://github.com/ostreedev/ostree/pull/902>;
this version should be better)
Using `${sysroot}` to mean the physical storage root: We don't want to write to
`${sysroot}/etc/ostree/remotes.d`, since nothing will read it, and really
`${sysroot}` should just have `/ostree` (ideally). Today the Anaconda rpmostree
code ends up writing there. Fix this by adding a notion of "physical" sysroot.
We determine whether the path is physical by checking for `/sysroot`, which
exists in deployment roots (and there shouldn't be a `${sysroot}/sysroot`).
In order to unit test this, I added a `--sysroot` argument to `remote add`.
However, doing this better would require reworking the command line parsing for
the `remote` argument to support specifying `--repo` or `--sysroot`, and I
didn't quite want to do that yet in this patch.
This second iteration of this patch fixes the bug we hit the first time;
embarassingly enough I broke `ostree remote list` finding system remotes.
The fix is to have `ostree_repo_open()` figure out whether it's the same
as `/ostree/repo` for now.
Down the line...we might consider having the `ostree remote` command line itself
instatiate an `OstreeSysroot` by default, but this maximizes compatibility; we
just have to pay a small cost that `ostree` usage outside of that case like
`ostree static-delta` in a releng Jenkins job or whatever will do this `stat()`
too.
Closes: https://github.com/ostreedev/ostree/issues/892Closes: #1008
Approved by: mbarnes
This imports a function that is used in rpm-ostree, and it's also intended for
use by https://github.com/advancedtelematic/aktualizr to display
what deployment we're going to boot next after the reboot.
Updated-by: Colin Walters <walters@verbum.org>
Closes: #897
Approved by: OYTIS
This reverts commit 1eff3e8343. There
are a few issues with it. It's not a critical thing for now, so
let's ugly up the git history and revisit when we have time to
debug it and add more tests.
Besides the below issue, I noticed that the simple `ostree remote add`
now writes to `/ostree/repo/config` because we *aren't* using the
`--sysroot` argument.
Closes: https://github.com/ostreedev/ostree/issues/901Closes: #902
Approved by: mike-nguyen
Using `${sysroot}` to mean the physical storage root: We don't want to write to
`${sysroot}/etc/ostree/remotes.d`, since nothing will read it, and really
`${sysroot}` should just have `/ostree` (ideally). Today the Anaconda rpmostree
code ends up writing there. Fix this by adding a notion of "physical" sysroot.
We determine whether the path is physical by checking for `/sysroot`, which
exists in deployment roots (and there shouldn't be a `${sysroot}/sysroot`).
In order to unit test this, I added a `--sysroot` argument to `remote add`.
However, doing this better would require reworking the command line parsing for
the `remote` argument to support specifying `--repo` or `--sysroot`, and I
didn't quite want to do that yet in this patch.
Closes: https://github.com/ostreedev/ostree/issues/892Closes: #896
Approved by: jlebon
They are installed non-executable, which makes Debian's Lintian
packaging consistency check complain that #! is only useful
in executable scripts. But in fact they are not useful to execute
directly (they rely on setup being done in the script that sources
them), so just chmod them -x.
Closes: #652
Approved by: cgwalters
This is a proper fix for:
https://bugzilla.gnome.org/show_bug.cgi?id=755787
With this patch, an admin (system builder) can now:
1) Edit /usr/lib/ostree-boot/uEnv.txt
2) Deploy the new tree. OSTree will append system's uEnv.txt
to the OSTree's managed uEnv.txt (loader/uEnv.txt).
It is common for u-boot systems to read in an extra env
from external /uEnv.txt. The same file OSTree uses to pass
in its env. With this patch /uEnv.txt now contains OSTree's
env + custom env added by system builders.
Closes: #466
Approved by: cgwalters
ostree-grub-generator can be used to customize
the generated grub.cfg file. Compile time
decision ostree-grub-generator vs grub2-mkconfig
can be overwritten with the OSTREE_GRUB2_EXEC
envvar - useful for auto tests and OS installers.
Why this alternative approach:
1) The current approach is less flexible than using a
custom 'ostree-grub-generator' script. Each system can
adjust this script for its needs, instead of using the
hardcoded values from ostree-bootloader-grub2.c.
2) Too much overhead on embedded to generate grub.cfg
via /etc/grub.d/ configuration files. It is still
possible to do so, even with this patch applied.
No need to install grub2 package on a target device.
3) The grub2-mkconfig code path has other issues:
https://bugzilla.gnome.org/show_bug.cgi?id=761180
Task: https://bugzilla.gnome.org/show_bug.cgi?id=762220Closes: #228
Approved by: cgwalters
The "function foo()" syntax is bash-specific, and Colin indicated in
PR #226 that he prefers to require bash rather than trying to support
every POSIX shell.
Signed-off-by: Simon McVittie <smcv@debian.org>
Closes: #232
Approved by: cgwalters
This allows other processes (e.g. rpm-ostreed) to monitor for external
changes (e.g. if someone does `ostree admin undeploy`) in a relatively
sane fashion.
Specifically, I'm trying to fix:
https://github.com/projectatomic/rpm-ostree/issues/220
OSTree's code for testing predates the `glib-tap.mk` making its
way into GLib. Let's switch to it, as it provides a number
of advantages.
By far the biggest advantage is that `make check` can start to run
most of the tests *in addition* to having them work installed.
This commit keeps the installed tests working, but `make check` turns
out to be really broken because...our TAP usage has bitrotted to say
the least. Fix that all up.
Do some hacks so that the tests work uninstalled as well - in
particular, `glib-tap.mk` and the bits encoded into
`g_test_build_filename()` assume *recursive* Automake (blah). Work
around that by creating a symlink when installed to loop back.
I'd like to incrementally convert all of `ostree-repo*.c` to
fd-relative usage, so that we can sanely introduce
`ostree_repo_new_at()` which doesn't involve GFile.
This one is medium risk, but passes the test suite.
I noticed in the static deltas tests, there were some tests that
should have been under `-o pipefail` to ensure we properly propagate
errors.
There were a few places where we were referencing undefined variables.
Overall, this is clearly a good idea IMO.
Adds an entry to the origin file to force the OstreeSysrootUpgrader to
pull and deploy the given checksum.
[origin]
override-commit=CHECKSUM
If the option is not given, any such entry is explicitly removed from
the origin file to ensure we upgrade to the latest available commit.
Eliminates the need for constantly passing --sysroot=sysroot, but
also makes ostree place remote configs for sysroot/ostree/repo in
sysroot/etc/ostree/remotes.d where they should have been all along.
See projectatomic/rpm-ostree#42 for rationale. There are two high
level use cases:
- If the OS comes unconfigured, this is a way to point it at a repo of your choice.
- To switch between repositories while keeping the same branch easily.
Use the pattern:
$PRETTY_NAME [$COMMIT_VERSION] (ostree[:$OSNAME][:$DEPLOYMENT_INDEX])
$OSNAME is only shown if there are multiple values.
$COMMIT_VERSION refers to the version tag in the commit's metadata.
$DEPLOYMENT_INDEX is only shown if no $COMMIT_VERSION is available.
https://bugzilla.gnome.org/show_bug.cgi?id=739416
If we deployed a new tree inside an existing OS, inheriting kernel
args, we need to use append() instead of replace() to avoid collapsing
multiply specified kernel arguments like console=/dev/foo
console=/dev/bar.
Reported-by: Dusty Mabe <dusty@dustymabe.com>
The test-admin-deploy-1 was copied into -uboot at some point. But
really they should be testing exactly the same thing, except for
the bootloader backend.
Unify these tests by extracting a common test core.
