IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
In a CI run I think one of these `ostree show` commands is failing.
While that output would be useful, the actual `err.txt` usually
has what we want too.
For the same reason as https://github.com/coreos/rpm-ostree/pull/2094.
What we care most about is that the new commit we pull is newer than the
one we're currently sitting on, not necessarily that it's newer than the
branch itself, which it might not be if e.g. we're trying to deploy a
commit older than the tip but still newer than the deployment (via
`--override-commit`).
If there are different deployments for the same commit version, the BLS
snippets will have the same title fields (but different version fields):
$ grep title *
ostree-1-testos.conf:title TestOS 42 20190902.0 (ostree)
ostree-2-testos.conf:title TestOS 42 20190902.0 (ostree)
ostree-3-testos.conf:title TestOS 42 20190902.0 (ostree)
But bootloaders could expect the title field to be unique for BLS files.
For example, the zipl bootloader used in the s390x architecture uses the
field to name the boot sections that are created from the BLS snippets.
So two BLS snippets having the same title would lead to zipl failing to
create the IPL boot sections because they would have duplicated names:
$ zipl
Using config file '/etc/zipl.conf'
Using BLS config file '/boot/loader/entries/ostree-3-testos.conf'
Using BLS config file '/boot/loader/entries/ostree-2-testos.conf'
Using BLS config file '/boot/loader/entries/ostree-1-testos.conf'
Error: Config file '/etc/zipl.conf': Line 0: section name 'TestOS 42 20190902.0 (ostree)' already specified
Avoid this by always including the deployment index along with the commit
version in the title field, so this will be unique even if there are BLS
files for deployments that use the same commit version:
$ grep title *
ostree-1-testos.conf:title TestOS 42 20190902.0 (ostree:2)
ostree-2-testos.conf:title TestOS 42 20190902.0 (ostree:1)
ostree-3-testos.conf:title TestOS 42 20190902.0 (ostree:0)
$ zipl
Using config file '/etc/zipl.conf'
Using BLS config file '/boot/loader/entries/ostree-3-testos.conf'
Using BLS config file '/boot/loader/entries/ostree-2-testos.conf'
Using BLS config file '/boot/loader/entries/ostree-1-testos.conf'
Building bootmap in '/boot'
Building menu 'zipl-automatic-menu'
Adding #1: IPL section 'TestOS 42 20190902.0 (ostree:0)' (default)
Adding #2: IPL section 'TestOS 42 20190902.0 (ostree:1)'
Adding #3: IPL section 'TestOS 42 20190902.0 (ostree:2)'
Preparing boot device: dasda (0120).
Done.
Closes: #1911
Approved by: cgwalters
This skips creating the default stuff in the physical sysroot.
I don't recall why I did that to be honest; it originated with
the first commit of this file. It might not have ever been
necessary.
In any case, it's not necessary now with Fedora CoreOS, so
prune it and let's have a clean `/`.
Keep the old behavior by default though to avoid breaking anyone.
Closes: #1894
Approved by: ajeddeloh
In Silverblue right now, the boot menu title looks like this:
Fedora 29.20190301.0 (Workstation Edition) 29.20190301.0 (ostree)
This is because RPM-OSTree's `mutate-os-release` feature is enabled,
which injects the OSTree version string directly into `VERSION` and
`PRETTY_NAME`. So appending the version string again is a bit redundant.
Let's just do a simple substring check here before adding the version to
the title.
Closes: #1829
Approved by: cgwalters
Currently the BLS snippets are named ostree-$ID-$VARIANT_ID-$index.conf,
but the BLS config files are actually sorted by using the version field
which is the inverse of the index.
In most places, _ostree_sysroot_read_boot_loader_configs() is used to
get the BLS files and this function already returns them sorted by the
version field. The only place where the index trailing number is used is
in the ostree-grub-generator script that lists the BLS files to populate
the grub config file.
But for some bootloaders the BLS filename is the criteria for sorting by
taking the filename as a string version. So on these bootloaders the BLS
entries will be listed in the reverse order.
To avoid that, change the BLS snippets filename to have the version field
instead of the index and also to have the version before deployment name.
Make the filenames to be of the form ostree-$version-$ID-$VARIANT_ID.conf
so the version is before the deployment name.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Closes: #1654
Approved by: cgwalters
I feel like I'm drowning in a pile of experimental-but-almost-stable
features...
Anyways, since we made the feature opt-in in rpm-ostree in
https://github.com/projectatomic/rpm-ostree/pull/1352
let's mirror that a bit here with an environment variable so people
can play with it more easily.
The tests needed some tweaks; specifically we need to reload the
status fact after making changes. I'm still a bit uncertain
about the Ansible-as-tests.
But we add an upgrade test that uses the new environment variable.
Closes: #1583
Approved by: jlebon
There's no reason to do this. I didn't actually hit this problem,
but it's a corner case that just occurred to me while working on
the code.
I think callers should be adapted to skip trying to use staging
if there's no booted deployment.
Closes: #1568
Approved by: jlebon
SPDX License List is a list of (common) open source
licenses that can be referred to by a “short identifier”.
It has several advantages compared to the common "license header texts"
usually found in source files.
Some of the advantages:
* It is precise; there is no ambiguity due to variations in license header
text
* It is language neutral
* It is easy to machine process
* It is concise
* It is simple and can be used without much cost in interpreted
environments like java Script, etc.
* An SPDX license identifier is immutable.
* It provides simple guidance for developers who want to make sure the
license for their code is respected
See http://spdx.org for further reading.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Closes: #1439
Approved by: cgwalters
This is a freeform string useful to track/display when a commit is "derived"
from some other format. For example, in the rpm-ostree test we make a
`vmcheck` ref that conceptually overlays the default ref like
`fedora-atomic:fedora/26/x86_64/atomic-host`.
My current patch sets the source title to e.g.
"Dev overlay on fedora-atomic:fedora/26/x86_64/atomic-host".
Another case I'm working on now is importing OCI images to use
as host images. For that case, the source title is
With this patch we could then set the original OCI image name + tag
as the source name, like:
"oci:cgwalters/demo-custom-fedora-atomic-host:26".
Closes: #1296
Approved by: jlebon
This option allows a repo to explicitly opt out of adding new remotes in
a remotes configuration directory. This currently defaults to true for
system repos and false for non-system repos to maintain legacy behavior
that non-system repos don't add remotes in a configuration directory.
That would be problematic for flatpak, which specifies a remotes config
dir but adds remotes in ways that are incompatible with it.
So, what this really does is allow system repos to control whether they
want to add remotes in the config dir or not. That's important if your
flatpak repo is the system repo like at Endless.
Closes: #1134Closes: #1155
Approved by: cgwalters
Steal some code from flatpak for this, which allows porting a few more things to
new style. I started on a public API version of this but was trying to roll some
other things into it and it snowballed. Let's do this version since it's easy
for now.
While here I changed things so that `generate_deployment_refs()` now just uses
`_set_ref_immediate()` rather than requring a txn.
Also, AFAICS there was no test coverage of `generate_deployment_refs()`; I tried
commenting it out and at least `admin-test.sh` passed. Add some coverage of this
- I verified that with this commenting out bits of that function cause the test
to fail.
Closes: #1132
Approved by: jlebon
This is a follow-up to https://github.com/ostreedev/ostree/pull/1097.
We make simple_write_deployment smart enough so that it can be used for
rpm-ostree's purposes. This is mostly an upstreaming of logic that
already existed there.
Notably we correctly append NOT_DEFAULT deployments *after* the booted
deployment and we now support RETAIN_PENDING and RETAIN_ROLLBACK flags
to have more granularity on deployment pruning.
Expose these new flags on the CLI using new options (as well as expose
the previously existing NOT_DEFAULT flag as --not-as-default).
I couldn't add tests for --retain-pending because the merge deployment
is always the topmost one. Though I did check that it worked in a VM.
Closes: #1110
Approved by: cgwalters
See: http://marc.info/?l=linux-fsdevel&m=149520244919284&w=2
XFS doesn't flush the journal on `syncfs()`. GRUB doesn't know how to follow the
XFS journal, so if the filesystem is in a dirty state (possible with xfs
`/boot`, extremely likely with `/`, if the journaled data includes content for
`/boot`, the system may be unbootable if a system crash occurs.
Fix this by doing a `FIFREEZE`+`FITHAW` cycle. Now, most people
probably would have replaced the `syncfs()` invocation with those two
ioctls. But this would have become (I believe) the *only* place in
libostree where we weren't safe against interruption. The failure
mode would be ugly; nothing else would be able to write to the filesystem
until manual intervention.
The real fix here I think is to land an atomic `FIFREEZETHAW` ioctl
in the kernel. I might try a patch.
In the meantime though, let's jump through some hoops and set up
a "watchdog" child process that acts as a fallback unfreezer.
Closes: https://github.com/ostreedev/ostree/issues/876Closes: #1049
Approved by: jlebon
(Note this PR was reverted in <https://github.com/ostreedev/ostree/pull/902>;
this version should be better)
Using `${sysroot}` to mean the physical storage root: We don't want to write to
`${sysroot}/etc/ostree/remotes.d`, since nothing will read it, and really
`${sysroot}` should just have `/ostree` (ideally). Today the Anaconda rpmostree
code ends up writing there. Fix this by adding a notion of "physical" sysroot.
We determine whether the path is physical by checking for `/sysroot`, which
exists in deployment roots (and there shouldn't be a `${sysroot}/sysroot`).
In order to unit test this, I added a `--sysroot` argument to `remote add`.
However, doing this better would require reworking the command line parsing for
the `remote` argument to support specifying `--repo` or `--sysroot`, and I
didn't quite want to do that yet in this patch.
This second iteration of this patch fixes the bug we hit the first time;
embarassingly enough I broke `ostree remote list` finding system remotes.
The fix is to have `ostree_repo_open()` figure out whether it's the same
as `/ostree/repo` for now.
Down the line...we might consider having the `ostree remote` command line itself
instatiate an `OstreeSysroot` by default, but this maximizes compatibility; we
just have to pay a small cost that `ostree` usage outside of that case like
`ostree static-delta` in a releng Jenkins job or whatever will do this `stat()`
too.
Closes: https://github.com/ostreedev/ostree/issues/892Closes: #1008
Approved by: mbarnes
This imports a function that is used in rpm-ostree, and it's also intended for
use by https://github.com/advancedtelematic/aktualizr to display
what deployment we're going to boot next after the reboot.
Updated-by: Colin Walters <walters@verbum.org>
Closes: #897
Approved by: OYTIS
This reverts commit 1eff3e8343. There
are a few issues with it. It's not a critical thing for now, so
let's ugly up the git history and revisit when we have time to
debug it and add more tests.
Besides the below issue, I noticed that the simple `ostree remote add`
now writes to `/ostree/repo/config` because we *aren't* using the
`--sysroot` argument.
Closes: https://github.com/ostreedev/ostree/issues/901Closes: #902
Approved by: mike-nguyen
Using `${sysroot}` to mean the physical storage root: We don't want to write to
`${sysroot}/etc/ostree/remotes.d`, since nothing will read it, and really
`${sysroot}` should just have `/ostree` (ideally). Today the Anaconda rpmostree
code ends up writing there. Fix this by adding a notion of "physical" sysroot.
We determine whether the path is physical by checking for `/sysroot`, which
exists in deployment roots (and there shouldn't be a `${sysroot}/sysroot`).
In order to unit test this, I added a `--sysroot` argument to `remote add`.
However, doing this better would require reworking the command line parsing for
the `remote` argument to support specifying `--repo` or `--sysroot`, and I
didn't quite want to do that yet in this patch.
Closes: https://github.com/ostreedev/ostree/issues/892Closes: #896
Approved by: jlebon
They are installed non-executable, which makes Debian's Lintian
packaging consistency check complain that #! is only useful
in executable scripts. But in fact they are not useful to execute
directly (they rely on setup being done in the script that sources
them), so just chmod them -x.
Closes: #652
Approved by: cgwalters
This is a proper fix for:
https://bugzilla.gnome.org/show_bug.cgi?id=755787
With this patch, an admin (system builder) can now:
1) Edit /usr/lib/ostree-boot/uEnv.txt
2) Deploy the new tree. OSTree will append system's uEnv.txt
to the OSTree's managed uEnv.txt (loader/uEnv.txt).
It is common for u-boot systems to read in an extra env
from external /uEnv.txt. The same file OSTree uses to pass
in its env. With this patch /uEnv.txt now contains OSTree's
env + custom env added by system builders.
Closes: #466
Approved by: cgwalters
ostree-grub-generator can be used to customize
the generated grub.cfg file. Compile time
decision ostree-grub-generator vs grub2-mkconfig
can be overwritten with the OSTREE_GRUB2_EXEC
envvar - useful for auto tests and OS installers.
Why this alternative approach:
1) The current approach is less flexible than using a
custom 'ostree-grub-generator' script. Each system can
adjust this script for its needs, instead of using the
hardcoded values from ostree-bootloader-grub2.c.
2) Too much overhead on embedded to generate grub.cfg
via /etc/grub.d/ configuration files. It is still
possible to do so, even with this patch applied.
No need to install grub2 package on a target device.
3) The grub2-mkconfig code path has other issues:
https://bugzilla.gnome.org/show_bug.cgi?id=761180
Task: https://bugzilla.gnome.org/show_bug.cgi?id=762220Closes: #228
Approved by: cgwalters
The "function foo()" syntax is bash-specific, and Colin indicated in
PR #226 that he prefers to require bash rather than trying to support
every POSIX shell.
Signed-off-by: Simon McVittie <smcv@debian.org>
Closes: #232
Approved by: cgwalters
This allows other processes (e.g. rpm-ostreed) to monitor for external
changes (e.g. if someone does `ostree admin undeploy`) in a relatively
sane fashion.
Specifically, I'm trying to fix:
https://github.com/projectatomic/rpm-ostree/issues/220
OSTree's code for testing predates the `glib-tap.mk` making its
way into GLib. Let's switch to it, as it provides a number
of advantages.
By far the biggest advantage is that `make check` can start to run
most of the tests *in addition* to having them work installed.
This commit keeps the installed tests working, but `make check` turns
out to be really broken because...our TAP usage has bitrotted to say
the least. Fix that all up.
Do some hacks so that the tests work uninstalled as well - in
particular, `glib-tap.mk` and the bits encoded into
`g_test_build_filename()` assume *recursive* Automake (blah). Work
around that by creating a symlink when installed to loop back.
I'd like to incrementally convert all of `ostree-repo*.c` to
fd-relative usage, so that we can sanely introduce
`ostree_repo_new_at()` which doesn't involve GFile.
This one is medium risk, but passes the test suite.
I noticed in the static deltas tests, there were some tests that
should have been under `-o pipefail` to ensure we properly propagate
errors.
There were a few places where we were referencing undefined variables.
Overall, this is clearly a good idea IMO.
Adds an entry to the origin file to force the OstreeSysrootUpgrader to
pull and deploy the given checksum.
[origin]
override-commit=CHECKSUM
If the option is not given, any such entry is explicitly removed from
the origin file to ensure we upgrade to the latest available commit.
Eliminates the need for constantly passing --sysroot=sysroot, but
also makes ostree place remote configs for sysroot/ostree/repo in
sysroot/etc/ostree/remotes.d where they should have been all along.
See projectatomic/rpm-ostree#42 for rationale. There are two high
level use cases:
- If the OS comes unconfigured, this is a way to point it at a repo of your choice.
- To switch between repositories while keeping the same branch easily.
Use the pattern:
$PRETTY_NAME [$COMMIT_VERSION] (ostree[:$OSNAME][:$DEPLOYMENT_INDEX])
$OSNAME is only shown if there are multiple values.
$COMMIT_VERSION refers to the version tag in the commit's metadata.
$DEPLOYMENT_INDEX is only shown if no $COMMIT_VERSION is available.
https://bugzilla.gnome.org/show_bug.cgi?id=739416
If we deployed a new tree inside an existing OS, inheriting kernel
args, we need to use append() instead of replace() to avoid collapsing
multiply specified kernel arguments like console=/dev/foo
console=/dev/bar.
Reported-by: Dusty Mabe <dusty@dustymabe.com>
The test-admin-deploy-1 was copied into -uboot at some point. But
really they should be testing exactly the same thing, except for
the bootloader backend.
Unify these tests by extracting a common test core.
