IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Add support for a devicetree directory at /usr/lib/modules/$kver/dtb/.
In ARM world a general purpose distribution often suppports multiple
boards with a single operating system. However, OSTree currently only
supports a single device tree, which does not allow to use the same
OSTree on different ARM machines. In this scenario typically the boot
loader selects the effective device tree.
This adds device tree directory support for the new boot artefact
location under /usr/lib/modules. If the file `devicetree` does not
exist, then the folder dtb will be checked. All devicetrees are hashed
into the deployment hash. This makes sure that even a single devicetree
change leads to a new deployment and hence can be rolled back.
The loader configuration has a new key "devicetreepath" which contains
the path where devicetrees are stored. This is also written to the
U-Boot variable "fdtdir". The boot loader is expected to use this path
to load a particular machines device tree from.
Closes: #1900
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
SPDX License List is a list of (common) open source
licenses that can be referred to by a “short identifier”.
It has several advantages compared to the common "license header texts"
usually found in source files.
Some of the advantages:
* It is precise; there is no ambiguity due to variations in license header
text
* It is language neutral
* It is easy to machine process
* It is concise
* It is simple and can be used without much cost in interpreted
environments like java Script, etc.
* An SPDX license identifier is immutable.
* It provides simple guidance for developers who want to make sure the
license for their code is respected
See http://spdx.org for further reading.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Closes: #1439
Approved by: cgwalters
This is a freeform string useful to track/display when a commit is "derived"
from some other format. For example, in the rpm-ostree test we make a
`vmcheck` ref that conceptually overlays the default ref like
`fedora-atomic:fedora/26/x86_64/atomic-host`.
My current patch sets the source title to e.g.
"Dev overlay on fedora-atomic:fedora/26/x86_64/atomic-host".
Another case I'm working on now is importing OCI images to use
as host images. For that case, the source title is
With this patch we could then set the original OCI image name + tag
as the source name, like:
"oci:cgwalters/demo-custom-fedora-atomic-host:26".
Closes: #1296
Approved by: jlebon
Include non-default deployments in the uEnv.txt file imported by
U-Boot. All the configurations beside the defaults will have
numerical suffix E.G. "kernel_image2" or "bootargs2".
Those U-Boot environment variables may be used from interactive boot
prompt or from "altbootcmd" script.
Closes: #1138
Approved by: cgwalters
In almost all places. There are just a few exceptions; one tricky bit for
example is that the repo config must still have `mode=archive-z2`, since
`archive` used to mean something else. (We could very likely just get rid of
that check, but eh, later).
I also added a test that one can still do `ostree repo init --mode=archive-z2`.
Closes: #1125
Approved by: jlebon
This is a follow-up to https://github.com/ostreedev/ostree/pull/1097.
We make simple_write_deployment smart enough so that it can be used for
rpm-ostree's purposes. This is mostly an upstreaming of logic that
already existed there.
Notably we correctly append NOT_DEFAULT deployments *after* the booted
deployment and we now support RETAIN_PENDING and RETAIN_ROLLBACK flags
to have more granularity on deployment pruning.
Expose these new flags on the CLI using new options (as well as expose
the previously existing NOT_DEFAULT flag as --not-as-default).
I couldn't add tests for --retain-pending because the merge deployment
is always the topmost one. Though I did check that it worked in a VM.
Closes: #1110
Approved by: cgwalters
This is the new Fedora kernel standard layout; it has the advantage
of being in `/usr` like `/usr/lib/ostree-boot`, but it's not OSTree
specific.
Further, I think in practice forcing tree builders to compute the checksum is an
annoying stumbling block; since we already switched to e.g. computing checksums
always when doing pulls, the cost of doing another checksum for the
kernel/initramfs is tiny. The "bootcsum" becomes more of an internal
implementation detail.
Now, there is a transition; my current thought for this is that rpm-ostree will
change to default to injecting into both `/usr/lib/ostree-boot` and
`/usr/lib/modules`, and stop doing `/boot`, then maybe next year say we drop the
`/usr/lib/ostree-boot` by default.
A twist here is that the default Fedora kernel RPM layout (and what's in
rpm-ostree today) includes a kernel but *not* an initramfs in
`/usr/lib/modules`. If we looked only there, we'd just find the kernel. So we
need to look in both, and then special case this - pick the legacy layout if we
have `/usr/lib/modules` but not an initramfs.
While here, rework the code to have an `OstreeKernelLayout` struct which makes
dealing with all of the variables nicer.
Closes: #1079
Approved by: jlebon
I'd like to move the new canonical kernel directory to `/usr/lib/modules/$kver`,
as Fedora has done. The `get_kernel_from_tree()` function now abstracts over
parsing the data (src vs destination filenames, as well as checksum) in
preparation for adding the new case.
In preparation for this, let's change the current test suite to use the
*current* directory of `/usr/lib/ostree-boot`, and also add coverage of `/boot`.
Closes: #1053
Approved by: jlebon
See: http://marc.info/?l=linux-fsdevel&m=149520244919284&w=2
XFS doesn't flush the journal on `syncfs()`. GRUB doesn't know how to follow the
XFS journal, so if the filesystem is in a dirty state (possible with xfs
`/boot`, extremely likely with `/`, if the journaled data includes content for
`/boot`, the system may be unbootable if a system crash occurs.
Fix this by doing a `FIFREEZE`+`FITHAW` cycle. Now, most people
probably would have replaced the `syncfs()` invocation with those two
ioctls. But this would have become (I believe) the *only* place in
libostree where we weren't safe against interruption. The failure
mode would be ugly; nothing else would be able to write to the filesystem
until manual intervention.
The real fix here I think is to land an atomic `FIFREEZETHAW` ioctl
in the kernel. I might try a patch.
In the meantime though, let's jump through some hoops and set up
a "watchdog" child process that acts as a fallback unfreezer.
Closes: https://github.com/ostreedev/ostree/issues/876Closes: #1049
Approved by: jlebon
(Note this PR was reverted in <https://github.com/ostreedev/ostree/pull/902>;
this version should be better)
Using `${sysroot}` to mean the physical storage root: We don't want to write to
`${sysroot}/etc/ostree/remotes.d`, since nothing will read it, and really
`${sysroot}` should just have `/ostree` (ideally). Today the Anaconda rpmostree
code ends up writing there. Fix this by adding a notion of "physical" sysroot.
We determine whether the path is physical by checking for `/sysroot`, which
exists in deployment roots (and there shouldn't be a `${sysroot}/sysroot`).
In order to unit test this, I added a `--sysroot` argument to `remote add`.
However, doing this better would require reworking the command line parsing for
the `remote` argument to support specifying `--repo` or `--sysroot`, and I
didn't quite want to do that yet in this patch.
This second iteration of this patch fixes the bug we hit the first time;
embarassingly enough I broke `ostree remote list` finding system remotes.
The fix is to have `ostree_repo_open()` figure out whether it's the same
as `/ostree/repo` for now.
Down the line...we might consider having the `ostree remote` command line itself
instatiate an `OstreeSysroot` by default, but this maximizes compatibility; we
just have to pay a small cost that `ostree` usage outside of that case like
`ostree static-delta` in a releng Jenkins job or whatever will do this `stat()`
too.
Closes: https://github.com/ostreedev/ostree/issues/892Closes: #1008
Approved by: mbarnes
This reverts commit 1eff3e8343. There
are a few issues with it. It's not a critical thing for now, so
let's ugly up the git history and revisit when we have time to
debug it and add more tests.
Besides the below issue, I noticed that the simple `ostree remote add`
now writes to `/ostree/repo/config` because we *aren't* using the
`--sysroot` argument.
Closes: https://github.com/ostreedev/ostree/issues/901Closes: #902
Approved by: mike-nguyen
Using `${sysroot}` to mean the physical storage root: We don't want to write to
`${sysroot}/etc/ostree/remotes.d`, since nothing will read it, and really
`${sysroot}` should just have `/ostree` (ideally). Today the Anaconda rpmostree
code ends up writing there. Fix this by adding a notion of "physical" sysroot.
We determine whether the path is physical by checking for `/sysroot`, which
exists in deployment roots (and there shouldn't be a `${sysroot}/sysroot`).
In order to unit test this, I added a `--sysroot` argument to `remote add`.
However, doing this better would require reworking the command line parsing for
the `remote` argument to support specifying `--repo` or `--sysroot`, and I
didn't quite want to do that yet in this patch.
Closes: https://github.com/ostreedev/ostree/issues/892Closes: #896
Approved by: jlebon
This is a proper fix for:
https://bugzilla.gnome.org/show_bug.cgi?id=755787
With this patch, an admin (system builder) can now:
1) Edit /usr/lib/ostree-boot/uEnv.txt
2) Deploy the new tree. OSTree will append system's uEnv.txt
to the OSTree's managed uEnv.txt (loader/uEnv.txt).
It is common for u-boot systems to read in an extra env
from external /uEnv.txt. The same file OSTree uses to pass
in its env. With this patch /uEnv.txt now contains OSTree's
env + custom env added by system builders.
Closes: #466
Approved by: cgwalters
OSTree's code for testing predates the `glib-tap.mk` making its
way into GLib. Let's switch to it, as it provides a number
of advantages.
By far the biggest advantage is that `make check` can start to run
most of the tests *in addition* to having them work installed.
This commit keeps the installed tests working, but `make check` turns
out to be really broken because...our TAP usage has bitrotted to say
the least. Fix that all up.
Do some hacks so that the tests work uninstalled as well - in
particular, `glib-tap.mk` and the bits encoded into
`g_test_build_filename()` assume *recursive* Automake (blah). Work
around that by creating a symlink when installed to loop back.
I noticed in the static deltas tests, there were some tests that
should have been under `-o pipefail` to ensure we properly propagate
errors.
There were a few places where we were referencing undefined variables.
Overall, this is clearly a good idea IMO.
Eliminates the need for constantly passing --sysroot=sysroot, but
also makes ostree place remote configs for sysroot/ostree/repo in
sysroot/etc/ostree/remotes.d where they should have been all along.
The test-admin-deploy-1 was copied into -uboot at some point. But
really they should be testing exactly the same thing, except for
the bootloader backend.
Unify these tests by extracting a common test core.
commit 08b873457 ("deploy: Remove checksum from generated loader entries")
changed the generated loader entries file names thus making the U-Boot test
case to fail since this test parsed those files.
Fix test-admin-deploy-uboot.sh by looking to the updated files names.
https://bugzilla.gnome.org/show_bug.cgi?id=708511
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
OSTree now supports a backend for the U-Boot bootloader,
add a test case for this.
https://bugzilla.gnome.org/show_bug.cgi?id=708069
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
