mirror of
https://gitlab.com/qemu-project/qemu.git
synced 2024-12-02 18:42:58 +03:00
2dcbb11b39
Allow a client to request a subset of negotiated meta contexts. For example, a client may ask to use a single connection to learn about both block status and dirty bitmaps, but where the dirty bitmap queries only need to be performed on a subset of the disk; forcing the server to compute that information on block status queries in the rest of the disk is wasted effort (both at the server, and on the amount of traffic sent over the wire to be parsed and ignored by the client). Qemu as an NBD client never requests to use more than one meta context, so it has no need to use block status payloads. Testing this instead requires support from libnbd, which CAN access multiple meta contexts in parallel from a single NBD connection; an interop test submitted to the libnbd project at the same time as this patch demonstrates the feature working, as well as testing some corner cases (for example, when the payload length is longer than the export length), although other corner cases (like passing the same id duplicated) requires a protocol fuzzer because libnbd is not wired up to break the protocol that badly. This also includes tweaks to 'qemu-nbd --list' to show when a server is advertising the capability, and to the testsuite to reflect the addition to that output. Of note: qemu will always advertise the new feature bit during NBD_OPT_INFO if extended headers have alreay been negotiated (regardless of whether any NBD_OPT_SET_META_CONTEXT negotiation has occurred); but for NBD_OPT_GO, qemu only advertises the feature if block status is also enabled (that is, if the client does not negotiate any contexts, then NBD_CMD_BLOCK_STATUS cannot be used, so the feature is not advertised). Signed-off-by: Eric Blake <eblake@redhat.com> Message-ID: <20230925192229.3186470-26-eblake@redhat.com> [eblake: fix logic to reject unnegotiated contexts] Signed-off-by: Eric Blake <eblake@redhat.com>
82 lines
7.8 KiB
Plaintext
82 lines
7.8 KiB
Plaintext
# See docs/devel/tracing.rst for syntax documentation.
|
|
|
|
# client.c
|
|
nbd_send_option_request(uint32_t opt, const char *name, uint32_t len) "Sending option request %" PRIu32" (%s), len %" PRIu32
|
|
nbd_receive_option_reply(uint32_t option, const char *optname, uint32_t type, const char *typename, uint32_t length) "Received option reply %" PRIu32" (%s), type %" PRIu32" (%s), len %" PRIu32
|
|
nbd_server_error_msg(uint32_t err, const char *type, const char *msg) "server reported error 0x%" PRIx32 " (%s) with additional message: %s"
|
|
nbd_reply_err_ignored(uint32_t option, const char *name, uint32_t reply, const char *reply_name) "server failed request %" PRIu32 " (%s) with error 0x%" PRIx32 " (%s), attempting fallback"
|
|
nbd_receive_list(const char *name, const char *desc) "export list includes '%s', description '%s'"
|
|
nbd_opt_info_go_start(const char *opt, const char *name) "Attempting %s for export '%s'"
|
|
nbd_opt_info_go_success(const char *opt) "Export is ready after %s request"
|
|
nbd_opt_info_unknown(int info, const char *name) "Ignoring unknown info %d (%s)"
|
|
nbd_opt_info_block_size(uint32_t minimum, uint32_t preferred, uint32_t maximum) "Block sizes are 0x%" PRIx32 ", 0x%" PRIx32 ", 0x%" PRIx32
|
|
nbd_receive_query_exports_start(const char *wantname) "Querying export list for '%s'"
|
|
nbd_receive_query_exports_success(const char *wantname) "Found desired export name '%s'"
|
|
nbd_receive_starttls_new_client(void) "Setting up TLS"
|
|
nbd_receive_starttls_tls_handshake(void) "Starting TLS handshake"
|
|
nbd_opt_meta_request(const char *optname, const char *context, const char *export) "Requesting %s %s for export %s"
|
|
nbd_opt_meta_reply(const char *optname, const char *context, uint32_t id) "Received %s mapping of %s to id %" PRIu32
|
|
nbd_start_negotiate(void *tlscreds, const char *hostname) "Receiving negotiation tlscreds=%p hostname=%s"
|
|
nbd_receive_negotiate_magic(uint64_t magic) "Magic is 0x%" PRIx64
|
|
nbd_receive_negotiate_server_flags(uint32_t globalflags) "Global flags are 0x%" PRIx32
|
|
nbd_receive_negotiate_name(const char *name) "Requesting NBD export name '%s'"
|
|
nbd_receive_negotiate_size_flags(uint64_t size, uint16_t flags) "Size is %" PRIu64 ", export flags 0x%" PRIx16
|
|
nbd_init_set_socket(void) "Setting NBD socket"
|
|
nbd_init_set_block_size(unsigned long block_size) "Setting block size to %lu"
|
|
nbd_init_set_size(unsigned long sectors) "Setting size to %lu block(s)"
|
|
nbd_init_trailing_bytes(int ignored_bytes) "Ignoring trailing %d bytes of export"
|
|
nbd_init_set_readonly(void) "Setting readonly attribute"
|
|
nbd_init_finish(void) "Negotiation ended"
|
|
nbd_client_loop(void) "Doing NBD loop"
|
|
nbd_client_loop_ret(int ret, const char *error) "NBD loop returned %d: %s"
|
|
nbd_client_clear_queue(void) "Clearing NBD queue"
|
|
nbd_client_clear_socket(void) "Clearing NBD socket"
|
|
nbd_send_request(uint64_t from, uint64_t len, uint64_t cookie, uint16_t flags, uint16_t type, const char *name) "Sending request to server: { .from = %" PRIu64", .len = %" PRIu64 ", .cookie = %" PRIu64 ", .flags = 0x%" PRIx16 ", .type = %" PRIu16 " (%s) }"
|
|
nbd_receive_simple_reply(int32_t error, const char *errname, uint64_t cookie) "Got simple reply: { .error = %" PRId32 " (%s), cookie = %" PRIu64" }"
|
|
nbd_receive_reply_chunk_header(uint16_t flags, uint16_t type, const char *name, uint64_t cookie, uint32_t length) "Got reply chunk header: { flags = 0x%" PRIx16 ", type = %" PRIu16 " (%s), cookie = %" PRIu64 ", length = %" PRIu32 " }"
|
|
nbd_receive_wrong_header(uint32_t magic, const char *mode) "Server sent unexpected magic 0x%" PRIx32 " for negotiated mode %s"
|
|
|
|
# common.c
|
|
nbd_unknown_error(int err) "Squashing unexpected error %d to EINVAL"
|
|
|
|
# server.c
|
|
nbd_negotiate_send_rep_len(uint32_t opt, const char *optname, uint32_t type, const char *typename, uint32_t len) "Reply opt=%" PRIu32 " (%s), type=%" PRIu32 " (%s), len=%" PRIu32
|
|
nbd_negotiate_send_rep_err(const char *msg) "sending error message \"%s\""
|
|
nbd_negotiate_send_rep_list(const char *name, const char *desc) "Advertising export name '%s' description '%s'"
|
|
nbd_negotiate_handle_export_name(void) "Checking length"
|
|
nbd_negotiate_handle_export_name_request(const char *name) "Client requested export '%s'"
|
|
nbd_negotiate_send_info(int info, const char *name, uint32_t length) "Sending NBD_REP_INFO type %d (%s) with remaining length %" PRIu32
|
|
nbd_negotiate_handle_info_requests(int requests) "Client requested %d items of info"
|
|
nbd_negotiate_handle_info_request(int request, const char *name) "Client requested info %d (%s)"
|
|
nbd_negotiate_handle_info_block_size(uint32_t minimum, uint32_t preferred, uint32_t maximum) "advertising minimum 0x%" PRIx32 ", preferred 0x%" PRIx32 ", maximum 0x%" PRIx32
|
|
nbd_negotiate_handle_starttls(void) "Setting up TLS"
|
|
nbd_negotiate_handle_starttls_handshake(void) "Starting TLS handshake"
|
|
nbd_negotiate_meta_context(const char *optname, const char *export, uint32_t queries) "Client requested %s for export %s, with %" PRIu32 " queries"
|
|
nbd_negotiate_meta_query_skip(const char *reason) "Skipping meta query: %s"
|
|
nbd_negotiate_meta_query_parse(const char *query) "Parsed meta query '%s'"
|
|
nbd_negotiate_meta_query_reply(const char *context, uint32_t id) "Replying with meta context '%s' id %" PRIu32
|
|
nbd_negotiate_options_flags(uint32_t flags) "Received client flags 0x%" PRIx32
|
|
nbd_negotiate_options_check_magic(uint64_t magic) "Checking opts magic 0x%" PRIx64
|
|
nbd_negotiate_options_check_option(uint32_t option, const char *name) "Checking option %" PRIu32 " (%s)"
|
|
nbd_negotiate_begin(void) "Beginning negotiation"
|
|
nbd_negotiate_new_style_size_flags(uint64_t size, unsigned flags) "advertising size %" PRIu64 " and flags 0x%x"
|
|
nbd_negotiate_success(void) "Negotiation succeeded"
|
|
nbd_receive_request(uint32_t magic, uint16_t flags, uint16_t type, uint64_t from, uint64_t len) "Got request: { magic = 0x%" PRIx32 ", .flags = 0x%" PRIx16 ", .type = 0x%" PRIx16 ", from = %" PRIu64 ", len = %" PRIu64 " }"
|
|
nbd_blk_aio_attached(const char *name, void *ctx) "Export %s: Attaching clients to AIO context %p"
|
|
nbd_blk_aio_detach(const char *name, void *ctx) "Export %s: Detaching clients from AIO context %p"
|
|
nbd_co_send_simple_reply(uint64_t cookie, uint32_t error, const char *errname, uint64_t len) "Send simple reply: cookie = %" PRIu64 ", error = %" PRIu32 " (%s), len = %" PRIu64
|
|
nbd_co_send_chunk_done(uint64_t cookie) "Send structured reply done: cookie = %" PRIu64
|
|
nbd_co_send_chunk_read(uint64_t cookie, uint64_t offset, void *data, uint64_t size) "Send structured read data reply: cookie = %" PRIu64 ", offset = %" PRIu64 ", data = %p, len = %" PRIu64
|
|
nbd_co_send_chunk_read_hole(uint64_t cookie, uint64_t offset, uint64_t size) "Send structured read hole reply: cookie = %" PRIu64 ", offset = %" PRIu64 ", len = %" PRIu64
|
|
nbd_co_send_extents(uint64_t cookie, unsigned int extents, uint32_t id, uint64_t length, int last) "Send block status reply: cookie = %" PRIu64 ", extents = %u, context = %d (extents cover %" PRIu64 " bytes, last chunk = %d)"
|
|
nbd_co_send_chunk_error(uint64_t cookie, int err, const char *errname, const char *msg) "Send structured error reply: cookie = %" PRIu64 ", error = %d (%s), msg = '%s'"
|
|
nbd_co_receive_block_status_payload_compliance(uint64_t from, uint64_t len) "client sent unusable block status payload: from=0x%" PRIx64 ", len=0x%" PRIx64
|
|
nbd_co_receive_request_decode_type(uint64_t cookie, uint16_t type, const char *name) "Decoding type: cookie = %" PRIu64 ", type = %" PRIu16 " (%s)"
|
|
nbd_co_receive_request_payload_received(uint64_t cookie, uint64_t len) "Payload received: cookie = %" PRIu64 ", len = %" PRIu64
|
|
nbd_co_receive_ext_payload_compliance(uint64_t from, uint64_t len) "client sent non-compliant write without payload flag: from=0x%" PRIx64 ", len=0x%" PRIx64
|
|
nbd_co_receive_align_compliance(const char *op, uint64_t from, uint64_t len, uint32_t align) "client sent non-compliant unaligned %s request: from=0x%" PRIx64 ", len=0x%" PRIx64 ", align=0x%" PRIx32
|
|
nbd_trip(void) "Reading request"
|
|
|
|
# client-connection.c
|
|
nbd_connect_thread_sleep(uint64_t timeout) "timeout %" PRIu64
|