1
1
mirror of https://github.com/systemd/systemd-stable.git synced 2024-10-30 23:21:08 +03:00
systemd-stable/udev_add.c

370 lines
8.6 KiB
C
Raw Normal View History

/*
* udev-add.c
*
* Userspace devfs
*
* Copyright (C) 2003 Greg Kroah-Hartman <greg@kroah.com>
*
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation version 2 of the License.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#include <stdlib.h>
#include <string.h>
#include <stdio.h>
#include <fcntl.h>
#include <unistd.h>
#include <errno.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <grp.h>
[PATCH] hmm, handle net devices with udev? Hmm, Arndt Bergmann sent a patch like this one a few weeks ago and I want to bring the question back, if we want to handle net device naming with udev. With this patch it is actually possible to specify something like this in udev.rules: KERNEL="dummy*", SYSFS{address}="00:00:00:00:00:00", SYSFS{features}="0x0", NAME="blind%n" KERNEL="eth*", SYSFS{address}="00:0d:60:77:30:91", NAME="private" and you will get: [root@pim udev.kay]# cat /proc/net/dev Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 1500 30 0 0 0 0 0 0 1500 30 0 0 0 0 0 0 private: 278393 1114 0 0 0 0 0 0 153204 1468 0 0 0 0 0 0 sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blind0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 The udevinfo program is also working: [root@pim udev.kay]# ./udevinfo -a -p /sys/class/net/private looking at class device '/sys/class/net/private': SYSFS{addr_len}="6" SYSFS{address}="00:0d:60:77:30:91" SYSFS{broadcast}="ff:ff:ff:ff:ff:ff" SYSFS{features}="0x3a9" SYSFS{flags}="0x1003" SYSFS{ifindex}="2" SYSFS{iflink}="2" SYSFS{mtu}="1500" SYSFS{tx_queue_len}="1000" SYSFS{type}="1" follow the class device's "device" looking at the device chain at '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.0': BUS="pci" ID="0000:02:01.0" SYSFS{class}="0x020000" SYSFS{detach_state}="0" SYSFS{device}="0x101e" SYSFS{irq}="11" SYSFS{subsystem_device}="0x0549" SYSFS{subsystem_vendor}="0x1014" SYSFS{vendor}="0x8086" The matching device will be renamed to the given name. The device name will not be put into the udev database, cause the kernel renames the device and the sysfs name disappears. I like it, cause it plugs in nicely. We have all the naming features and sysfs queries and walks inside of udev. The sysfs timing races are already solved and the management tools are working for net devices too. nameif can only match the MAC address now. udev can match any sysfs value of the device tree the net device is connected to. But right, net devices do not have device nodes :)
2004-03-25 10:19:39 +03:00
#include <net/if.h>
#include <sys/socket.h>
#include <sys/ioctl.h>
#include <linux/sockios.h>
#include <pwd.h>
#include "libsysfs/sysfs/libsysfs.h"
#include "udev.h"
#include "udev_lib.h"
#include "udev_version.h"
#include "logging.h"
#include "namedev.h"
[PATCH] udevdb prototype Here's an "idea" of what I had in mind for udevdb. Let me preface the code with a few remarks: 1) I was expecting to write this udevdb for udev to keep track of devices. I was planning an external package that depends upon udev to provide an external API to the udevdb database. The calls for the interface would be read only access. Not sure how you want to do packaging, if having a separate package is ok or having it included in udev. 2) I created it as it is because udev isn't a daemon. So, the open database call doesn't take any parameters. My plan was to create a udevdb_init function that took arguments for initializing the db to start, where you could specify in memory only or a file location. This can all be filled in. 3) I hacked the Makefile to get it to work. Not sure how you'd want that in the future. 4) This assumes TDB has been installed elsewhere, you would need to edit your Makefile and point it to the header and library locations. How do you want to do TDB in udev? Do you want to just reference it and make udev dependent on that package being installed. Or should we do what samba does and include a limited tdb version in udev? 5) Again, I hacked udev into your existing code. In the future, I'd probably make a function around the filling out the udevice before calling the store command. Didn't know if you wanted to change your add device function to use struct udevice rather than having everything separate. 6) Not sure what we should include in the udevice structure that's stored by udev. I made a stab at a first shot - we can add and remove of course, this was a first pass. I've come to realize - with you including libsysfs in udev, the "external" interface that references udevdb could make use of getting information from through libsysfs from sysfs and doesn't need to be in udevdb. 7) I could write a namedevdb for namedev's device management if you wanted.
2003-08-06 10:57:23 +04:00
#include "udevdb.h"
#include "selinux.h"
/*
* the major/minor of a device is stored in a file called "dev"
* The number is stored in decimal values in the format: M:m
*/
static int get_major_minor(struct sysfs_class_device *class_dev, struct udevice *udev)
{
struct sysfs_attribute *attr = NULL;
attr = sysfs_get_classdev_attr(class_dev, "dev");
if (attr == NULL)
[PATCH] netdev - udevdb+dev.d changes Here is a patch to change the netdev handling in the database and for the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has no sysinfo(). o netdev's are also put into our database now. I want this for the udevruler gui to get a list of all handled devices. All devices in the db are stamped with the system uptime value at the creation time. 'udevinfo -d' prints it. o the DEVPATH value is the key for udevdb, but if we rename a netdev, the name is replaced in the kernel, so we add the changed name to the db to match with the remove event. NOTE: The dev.d/ scripts still get the original name from the hotplug call. Should we replace DEVPATH with the new name too? o We now only add a device to the db, if we have successfully created the main node or successfully renamed a netdev. This is the main part of the patch, cause I needed to clean the retval passing trough all the functions used for node creation. o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too. Can we change the name? o I've added a UDEV_NO_DEVD to possibly skip the script execution and used it in udev-test.pl. udevstart is the same horror now, if you have scripts with logging statements in dev.d/ it takes minutes to finish, can we skip the scripts here too? o The get_device_type() function is changed to be more strict, cause 'udevinfo -a -p /block/' gets a class device for it and tries to print the major/minor values. o bugfix, the RESULT value has now a working newline removal and a test for this case.
2004-04-01 11:12:57 +04:00
goto error;
dbg("dev='%s'", attr->value);
if (sscanf(attr->value, "%u:%u", &udev->major, &udev->minor) != 2)
[PATCH] netdev - udevdb+dev.d changes Here is a patch to change the netdev handling in the database and for the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has no sysinfo(). o netdev's are also put into our database now. I want this for the udevruler gui to get a list of all handled devices. All devices in the db are stamped with the system uptime value at the creation time. 'udevinfo -d' prints it. o the DEVPATH value is the key for udevdb, but if we rename a netdev, the name is replaced in the kernel, so we add the changed name to the db to match with the remove event. NOTE: The dev.d/ scripts still get the original name from the hotplug call. Should we replace DEVPATH with the new name too? o We now only add a device to the db, if we have successfully created the main node or successfully renamed a netdev. This is the main part of the patch, cause I needed to clean the retval passing trough all the functions used for node creation. o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too. Can we change the name? o I've added a UDEV_NO_DEVD to possibly skip the script execution and used it in udev-test.pl. udevstart is the same horror now, if you have scripts with logging statements in dev.d/ it takes minutes to finish, can we skip the scripts here too? o The get_device_type() function is changed to be more strict, cause 'udevinfo -a -p /block/' gets a class device for it and tries to print the major/minor values. o bugfix, the RESULT value has now a working newline removal and a test for this case.
2004-04-01 11:12:57 +04:00
goto error;
dbg("found major=%d, minor=%d", udev->major, udev->minor);
[PATCH] netdev - udevdb+dev.d changes Here is a patch to change the netdev handling in the database and for the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has no sysinfo(). o netdev's are also put into our database now. I want this for the udevruler gui to get a list of all handled devices. All devices in the db are stamped with the system uptime value at the creation time. 'udevinfo -d' prints it. o the DEVPATH value is the key for udevdb, but if we rename a netdev, the name is replaced in the kernel, so we add the changed name to the db to match with the remove event. NOTE: The dev.d/ scripts still get the original name from the hotplug call. Should we replace DEVPATH with the new name too? o We now only add a device to the db, if we have successfully created the main node or successfully renamed a netdev. This is the main part of the patch, cause I needed to clean the retval passing trough all the functions used for node creation. o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too. Can we change the name? o I've added a UDEV_NO_DEVD to possibly skip the script execution and used it in udev-test.pl. udevstart is the same horror now, if you have scripts with logging statements in dev.d/ it takes minutes to finish, can we skip the scripts here too? o The get_device_type() function is changed to be more strict, cause 'udevinfo -a -p /block/' gets a class device for it and tries to print the major/minor values. o bugfix, the RESULT value has now a working newline removal and a test for this case.
2004-04-01 11:12:57 +04:00
return 0;
error:
return -1;
}
static int create_path(char *file)
{
char p[NAME_SIZE];
char *pos;
int retval;
struct stat stats;
strfieldcpy(p, file);
pos = strchr(p+1, '/');
while (1) {
pos = strchr(pos+1, '/');
if (pos == NULL)
break;
*pos = 0x00;
if (stat(p, &stats)) {
selinux_setfscreatecon(p, S_IFDIR);
retval = mkdir(p, 0755);
if (retval != 0) {
dbg("mkdir(%s) failed with error '%s'",
p, strerror(errno));
return retval;
}
dbg("created '%s'", p);
} else {
selinux_setfilecon(p, S_IFDIR);
}
*pos = '/';
}
return 0;
}
static int make_node(char *file, int major, int minor, unsigned int mode, uid_t uid, gid_t gid)
{
struct stat stats;
int retval = 0;
if (stat(file, &stats) != 0)
goto create;
/* preserve node with already correct numbers, to not change the inode number */
if (((stats.st_mode & S_IFMT) == S_IFBLK || (stats.st_mode & S_IFMT) == S_IFCHR) &&
(stats.st_rdev == makedev(major, minor))) {
dbg("preserve file '%s', cause it has correct dev_t", file);
selinux_setfilecon(file,stats.st_mode);
goto perms;
}
if (unlink(file) != 0)
dbg("unlink(%s) failed with error '%s'", file, strerror(errno));
else
dbg("already present file '%s' unlinked", file);
create:
selinux_setfscreatecon(file, mode);
retval = mknod(file, mode, makedev(major, minor));
if (retval != 0) {
dbg("mknod(%s, %#o, %u, %u) failed with error '%s'",
file, mode, major, minor, strerror(errno));
[PATCH] netdev - udevdb+dev.d changes Here is a patch to change the netdev handling in the database and for the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has no sysinfo(). o netdev's are also put into our database now. I want this for the udevruler gui to get a list of all handled devices. All devices in the db are stamped with the system uptime value at the creation time. 'udevinfo -d' prints it. o the DEVPATH value is the key for udevdb, but if we rename a netdev, the name is replaced in the kernel, so we add the changed name to the db to match with the remove event. NOTE: The dev.d/ scripts still get the original name from the hotplug call. Should we replace DEVPATH with the new name too? o We now only add a device to the db, if we have successfully created the main node or successfully renamed a netdev. This is the main part of the patch, cause I needed to clean the retval passing trough all the functions used for node creation. o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too. Can we change the name? o I've added a UDEV_NO_DEVD to possibly skip the script execution and used it in udev-test.pl. udevstart is the same horror now, if you have scripts with logging statements in dev.d/ it takes minutes to finish, can we skip the scripts here too? o The get_device_type() function is changed to be more strict, cause 'udevinfo -a -p /block/' gets a class device for it and tries to print the major/minor values. o bugfix, the RESULT value has now a working newline removal and a test for this case.
2004-04-01 11:12:57 +04:00
goto exit;
}
perms:
dbg("chmod(%s, %#o)", file, mode);
if (chmod(file, mode) != 0) {
dbg("chmod(%s, %#o) failed with error '%s'", file, mode, strerror(errno));
[PATCH] netdev - udevdb+dev.d changes Here is a patch to change the netdev handling in the database and for the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has no sysinfo(). o netdev's are also put into our database now. I want this for the udevruler gui to get a list of all handled devices. All devices in the db are stamped with the system uptime value at the creation time. 'udevinfo -d' prints it. o the DEVPATH value is the key for udevdb, but if we rename a netdev, the name is replaced in the kernel, so we add the changed name to the db to match with the remove event. NOTE: The dev.d/ scripts still get the original name from the hotplug call. Should we replace DEVPATH with the new name too? o We now only add a device to the db, if we have successfully created the main node or successfully renamed a netdev. This is the main part of the patch, cause I needed to clean the retval passing trough all the functions used for node creation. o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too. Can we change the name? o I've added a UDEV_NO_DEVD to possibly skip the script execution and used it in udev-test.pl. udevstart is the same horror now, if you have scripts with logging statements in dev.d/ it takes minutes to finish, can we skip the scripts here too? o The get_device_type() function is changed to be more strict, cause 'udevinfo -a -p /block/' gets a class device for it and tries to print the major/minor values. o bugfix, the RESULT value has now a working newline removal and a test for this case.
2004-04-01 11:12:57 +04:00
goto exit;
}
if (uid != 0 || gid != 0) {
dbg("chown(%s, %u, %u)", file, uid, gid);
if (chown(file, uid, gid) != 0) {
dbg("chown(%s, %u, %u) failed with error '%s'",
file, uid, gid, strerror(errno));
[PATCH] netdev - udevdb+dev.d changes Here is a patch to change the netdev handling in the database and for the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has no sysinfo(). o netdev's are also put into our database now. I want this for the udevruler gui to get a list of all handled devices. All devices in the db are stamped with the system uptime value at the creation time. 'udevinfo -d' prints it. o the DEVPATH value is the key for udevdb, but if we rename a netdev, the name is replaced in the kernel, so we add the changed name to the db to match with the remove event. NOTE: The dev.d/ scripts still get the original name from the hotplug call. Should we replace DEVPATH with the new name too? o We now only add a device to the db, if we have successfully created the main node or successfully renamed a netdev. This is the main part of the patch, cause I needed to clean the retval passing trough all the functions used for node creation. o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too. Can we change the name? o I've added a UDEV_NO_DEVD to possibly skip the script execution and used it in udev-test.pl. udevstart is the same horror now, if you have scripts with logging statements in dev.d/ it takes minutes to finish, can we skip the scripts here too? o The get_device_type() function is changed to be more strict, cause 'udevinfo -a -p /block/' gets a class device for it and tries to print the major/minor values. o bugfix, the RESULT value has now a working newline removal and a test for this case.
2004-04-01 11:12:57 +04:00
goto exit;
}
}
[PATCH] netdev - udevdb+dev.d changes Here is a patch to change the netdev handling in the database and for the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has no sysinfo(). o netdev's are also put into our database now. I want this for the udevruler gui to get a list of all handled devices. All devices in the db are stamped with the system uptime value at the creation time. 'udevinfo -d' prints it. o the DEVPATH value is the key for udevdb, but if we rename a netdev, the name is replaced in the kernel, so we add the changed name to the db to match with the remove event. NOTE: The dev.d/ scripts still get the original name from the hotplug call. Should we replace DEVPATH with the new name too? o We now only add a device to the db, if we have successfully created the main node or successfully renamed a netdev. This is the main part of the patch, cause I needed to clean the retval passing trough all the functions used for node creation. o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too. Can we change the name? o I've added a UDEV_NO_DEVD to possibly skip the script execution and used it in udev-test.pl. udevstart is the same horror now, if you have scripts with logging statements in dev.d/ it takes minutes to finish, can we skip the scripts here too? o The get_device_type() function is changed to be more strict, cause 'udevinfo -a -p /block/' gets a class device for it and tries to print the major/minor values. o bugfix, the RESULT value has now a working newline removal and a test for this case.
2004-04-01 11:12:57 +04:00
exit:
return retval;
}
static int create_node(struct udevice *udev)
{
char filename[NAME_SIZE];
char linkname[NAME_SIZE];
char linktarget[NAME_SIZE];
char partitionname[NAME_SIZE];
uid_t uid = 0;
gid_t gid = 0;
int i;
int tail;
char *pos;
int len;
strfieldcpy(filename, udev_root);
strfieldcat(filename, udev->name);
switch (udev->type) {
2003-08-05 08:59:50 +04:00
case 'b':
udev->mode |= S_IFBLK;
2003-08-05 08:59:50 +04:00
break;
case 'c':
case 'u':
udev->mode |= S_IFCHR;
2003-08-05 08:59:50 +04:00
break;
case 'p':
udev->mode |= S_IFIFO;
2003-08-05 08:59:50 +04:00
break;
default:
dbg("unknown node type %c\n", udev->type);
2003-08-05 08:59:50 +04:00
return -EINVAL;
}
/* create parent directories if needed */
if (strrchr(udev->name, '/'))
create_path(filename);
if (udev->owner[0] != '\0') {
char *endptr;
unsigned long id = strtoul(udev->owner, &endptr, 10);
if (endptr[0] == '\0')
uid = (uid_t) id;
else {
struct passwd *pw;
pw = getpwnam(udev->owner);
if (pw == NULL)
dbg("specified user unknown '%s'", udev->owner);
else
uid = pw->pw_uid;
}
}
if (udev->group[0] != '\0') {
char *endptr;
unsigned long id = strtoul(udev->group, &endptr, 10);
if (endptr[0] == '\0')
gid = (gid_t) id;
else {
struct group *gr = getgrnam(udev->group);
if (gr == NULL)
dbg("specified group unknown '%s'", udev->group);
else
gid = gr->gr_gid;
}
}
if (!udev->test_run) {
info("creating device node '%s'", filename);
if (make_node(filename, udev->major, udev->minor, udev->mode, uid, gid) != 0)
[PATCH] netdev - udevdb+dev.d changes Here is a patch to change the netdev handling in the database and for the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has no sysinfo(). o netdev's are also put into our database now. I want this for the udevruler gui to get a list of all handled devices. All devices in the db are stamped with the system uptime value at the creation time. 'udevinfo -d' prints it. o the DEVPATH value is the key for udevdb, but if we rename a netdev, the name is replaced in the kernel, so we add the changed name to the db to match with the remove event. NOTE: The dev.d/ scripts still get the original name from the hotplug call. Should we replace DEVPATH with the new name too? o We now only add a device to the db, if we have successfully created the main node or successfully renamed a netdev. This is the main part of the patch, cause I needed to clean the retval passing trough all the functions used for node creation. o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too. Can we change the name? o I've added a UDEV_NO_DEVD to possibly skip the script execution and used it in udev-test.pl. udevstart is the same horror now, if you have scripts with logging statements in dev.d/ it takes minutes to finish, can we skip the scripts here too? o The get_device_type() function is changed to be more strict, cause 'udevinfo -a -p /block/' gets a class device for it and tries to print the major/minor values. o bugfix, the RESULT value has now a working newline removal and a test for this case.
2004-04-01 11:12:57 +04:00
goto error;
} else {
info("creating device node '%s', major = '%d', minor = '%d', "
"mode = '%#o', uid = '%d', gid = '%d'", filename,
udev->major, udev->minor, (mode_t)udev->mode, uid, gid);
}
[PATCH] netdev - udevdb+dev.d changes Here is a patch to change the netdev handling in the database and for the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has no sysinfo(). o netdev's are also put into our database now. I want this for the udevruler gui to get a list of all handled devices. All devices in the db are stamped with the system uptime value at the creation time. 'udevinfo -d' prints it. o the DEVPATH value is the key for udevdb, but if we rename a netdev, the name is replaced in the kernel, so we add the changed name to the db to match with the remove event. NOTE: The dev.d/ scripts still get the original name from the hotplug call. Should we replace DEVPATH with the new name too? o We now only add a device to the db, if we have successfully created the main node or successfully renamed a netdev. This is the main part of the patch, cause I needed to clean the retval passing trough all the functions used for node creation. o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too. Can we change the name? o I've added a UDEV_NO_DEVD to possibly skip the script execution and used it in udev-test.pl. udevstart is the same horror now, if you have scripts with logging statements in dev.d/ it takes minutes to finish, can we skip the scripts here too? o The get_device_type() function is changed to be more strict, cause 'udevinfo -a -p /block/' gets a class device for it and tries to print the major/minor values. o bugfix, the RESULT value has now a working newline removal and a test for this case.
2004-04-01 11:12:57 +04:00
/* create all_partitions if requested */
if (udev->partitions > 0) {
info("creating device partition nodes '%s[1-%i]'", filename, udev->partitions);
if (!udev->test_run) {
for (i = 1; i <= udev->partitions; i++) {
strfieldcpy(partitionname, filename);
strintcat(partitionname, i);
make_node(partitionname, udev->major, udev->minor + i, udev->mode, uid, gid);
}
}
}
[PATCH] netdev - udevdb+dev.d changes Here is a patch to change the netdev handling in the database and for the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has no sysinfo(). o netdev's are also put into our database now. I want this for the udevruler gui to get a list of all handled devices. All devices in the db are stamped with the system uptime value at the creation time. 'udevinfo -d' prints it. o the DEVPATH value is the key for udevdb, but if we rename a netdev, the name is replaced in the kernel, so we add the changed name to the db to match with the remove event. NOTE: The dev.d/ scripts still get the original name from the hotplug call. Should we replace DEVPATH with the new name too? o We now only add a device to the db, if we have successfully created the main node or successfully renamed a netdev. This is the main part of the patch, cause I needed to clean the retval passing trough all the functions used for node creation. o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too. Can we change the name? o I've added a UDEV_NO_DEVD to possibly skip the script execution and used it in udev-test.pl. udevstart is the same horror now, if you have scripts with logging statements in dev.d/ it takes minutes to finish, can we skip the scripts here too? o The get_device_type() function is changed to be more strict, cause 'udevinfo -a -p /block/' gets a class device for it and tries to print the major/minor values. o bugfix, the RESULT value has now a working newline removal and a test for this case.
2004-04-01 11:12:57 +04:00
/* create symlink(s) if requested */
foreach_strpart(udev->symlink, " ", pos, len) {
strfieldcpymax(linkname, pos, len+1);
strfieldcpy(filename, udev_root);
strfieldcat(filename, linkname);
dbg("symlink '%s' to node '%s' requested", filename, udev->name);
if (!udev->test_run)
if (strrchr(linkname, '/'))
create_path(filename);
/* optimize relative link */
linktarget[0] = '\0';
i = 0;
tail = 0;
while ((udev->name[i] == linkname[i]) && udev->name[i]) {
if (udev->name[i] == '/')
tail = i+1;
i++;
}
while (linkname[i] != '\0') {
if (linkname[i] == '/')
strfieldcat(linktarget, "../");
i++;
}
strfieldcat(linktarget, &udev->name[tail]);
dbg("symlink(%s, %s)", linktarget, filename);
if (!udev->test_run) {
selinux_setfscreatecon(filename, S_IFLNK);
unlink(filename);
[PATCH] netdev - udevdb+dev.d changes Here is a patch to change the netdev handling in the database and for the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has no sysinfo(). o netdev's are also put into our database now. I want this for the udevruler gui to get a list of all handled devices. All devices in the db are stamped with the system uptime value at the creation time. 'udevinfo -d' prints it. o the DEVPATH value is the key for udevdb, but if we rename a netdev, the name is replaced in the kernel, so we add the changed name to the db to match with the remove event. NOTE: The dev.d/ scripts still get the original name from the hotplug call. Should we replace DEVPATH with the new name too? o We now only add a device to the db, if we have successfully created the main node or successfully renamed a netdev. This is the main part of the patch, cause I needed to clean the retval passing trough all the functions used for node creation. o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too. Can we change the name? o I've added a UDEV_NO_DEVD to possibly skip the script execution and used it in udev-test.pl. udevstart is the same horror now, if you have scripts with logging statements in dev.d/ it takes minutes to finish, can we skip the scripts here too? o The get_device_type() function is changed to be more strict, cause 'udevinfo -a -p /block/' gets a class device for it and tries to print the major/minor values. o bugfix, the RESULT value has now a working newline removal and a test for this case.
2004-04-01 11:12:57 +04:00
if (symlink(linktarget, filename) != 0)
dbg("symlink(%s, %s) failed with error '%s'",
linktarget, filename, strerror(errno));
}
}
[PATCH] netdev - udevdb+dev.d changes Here is a patch to change the netdev handling in the database and for the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has no sysinfo(). o netdev's are also put into our database now. I want this for the udevruler gui to get a list of all handled devices. All devices in the db are stamped with the system uptime value at the creation time. 'udevinfo -d' prints it. o the DEVPATH value is the key for udevdb, but if we rename a netdev, the name is replaced in the kernel, so we add the changed name to the db to match with the remove event. NOTE: The dev.d/ scripts still get the original name from the hotplug call. Should we replace DEVPATH with the new name too? o We now only add a device to the db, if we have successfully created the main node or successfully renamed a netdev. This is the main part of the patch, cause I needed to clean the retval passing trough all the functions used for node creation. o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too. Can we change the name? o I've added a UDEV_NO_DEVD to possibly skip the script execution and used it in udev-test.pl. udevstart is the same horror now, if you have scripts with logging statements in dev.d/ it takes minutes to finish, can we skip the scripts here too? o The get_device_type() function is changed to be more strict, cause 'udevinfo -a -p /block/' gets a class device for it and tries to print the major/minor values. o bugfix, the RESULT value has now a working newline removal and a test for this case.
2004-04-01 11:12:57 +04:00
return 0;
error:
return -1;
}
static int rename_net_if(struct udevice *udev)
[PATCH] hmm, handle net devices with udev? Hmm, Arndt Bergmann sent a patch like this one a few weeks ago and I want to bring the question back, if we want to handle net device naming with udev. With this patch it is actually possible to specify something like this in udev.rules: KERNEL="dummy*", SYSFS{address}="00:00:00:00:00:00", SYSFS{features}="0x0", NAME="blind%n" KERNEL="eth*", SYSFS{address}="00:0d:60:77:30:91", NAME="private" and you will get: [root@pim udev.kay]# cat /proc/net/dev Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 1500 30 0 0 0 0 0 0 1500 30 0 0 0 0 0 0 private: 278393 1114 0 0 0 0 0 0 153204 1468 0 0 0 0 0 0 sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blind0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 The udevinfo program is also working: [root@pim udev.kay]# ./udevinfo -a -p /sys/class/net/private looking at class device '/sys/class/net/private': SYSFS{addr_len}="6" SYSFS{address}="00:0d:60:77:30:91" SYSFS{broadcast}="ff:ff:ff:ff:ff:ff" SYSFS{features}="0x3a9" SYSFS{flags}="0x1003" SYSFS{ifindex}="2" SYSFS{iflink}="2" SYSFS{mtu}="1500" SYSFS{tx_queue_len}="1000" SYSFS{type}="1" follow the class device's "device" looking at the device chain at '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.0': BUS="pci" ID="0000:02:01.0" SYSFS{class}="0x020000" SYSFS{detach_state}="0" SYSFS{device}="0x101e" SYSFS{irq}="11" SYSFS{subsystem_device}="0x0549" SYSFS{subsystem_vendor}="0x1014" SYSFS{vendor}="0x8086" The matching device will be renamed to the given name. The device name will not be put into the udev database, cause the kernel renames the device and the sysfs name disappears. I like it, cause it plugs in nicely. We have all the naming features and sysfs queries and walks inside of udev. The sysfs timing races are already solved and the management tools are working for net devices too. nameif can only match the MAC address now. udev can match any sysfs value of the device tree the net device is connected to. But right, net devices do not have device nodes :)
2004-03-25 10:19:39 +03:00
{
int sk;
struct ifreq ifr;
int retval;
dbg("changing net interface name from '%s' to '%s'", udev->kernel_name, udev->name);
if (udev->test_run)
[PATCH] netdev - udevdb+dev.d changes Here is a patch to change the netdev handling in the database and for the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has no sysinfo(). o netdev's are also put into our database now. I want this for the udevruler gui to get a list of all handled devices. All devices in the db are stamped with the system uptime value at the creation time. 'udevinfo -d' prints it. o the DEVPATH value is the key for udevdb, but if we rename a netdev, the name is replaced in the kernel, so we add the changed name to the db to match with the remove event. NOTE: The dev.d/ scripts still get the original name from the hotplug call. Should we replace DEVPATH with the new name too? o We now only add a device to the db, if we have successfully created the main node or successfully renamed a netdev. This is the main part of the patch, cause I needed to clean the retval passing trough all the functions used for node creation. o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too. Can we change the name? o I've added a UDEV_NO_DEVD to possibly skip the script execution and used it in udev-test.pl. udevstart is the same horror now, if you have scripts with logging statements in dev.d/ it takes minutes to finish, can we skip the scripts here too? o The get_device_type() function is changed to be more strict, cause 'udevinfo -a -p /block/' gets a class device for it and tries to print the major/minor values. o bugfix, the RESULT value has now a working newline removal and a test for this case.
2004-04-01 11:12:57 +04:00
return 0;
[PATCH] hmm, handle net devices with udev? Hmm, Arndt Bergmann sent a patch like this one a few weeks ago and I want to bring the question back, if we want to handle net device naming with udev. With this patch it is actually possible to specify something like this in udev.rules: KERNEL="dummy*", SYSFS{address}="00:00:00:00:00:00", SYSFS{features}="0x0", NAME="blind%n" KERNEL="eth*", SYSFS{address}="00:0d:60:77:30:91", NAME="private" and you will get: [root@pim udev.kay]# cat /proc/net/dev Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 1500 30 0 0 0 0 0 0 1500 30 0 0 0 0 0 0 private: 278393 1114 0 0 0 0 0 0 153204 1468 0 0 0 0 0 0 sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blind0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 The udevinfo program is also working: [root@pim udev.kay]# ./udevinfo -a -p /sys/class/net/private looking at class device '/sys/class/net/private': SYSFS{addr_len}="6" SYSFS{address}="00:0d:60:77:30:91" SYSFS{broadcast}="ff:ff:ff:ff:ff:ff" SYSFS{features}="0x3a9" SYSFS{flags}="0x1003" SYSFS{ifindex}="2" SYSFS{iflink}="2" SYSFS{mtu}="1500" SYSFS{tx_queue_len}="1000" SYSFS{type}="1" follow the class device's "device" looking at the device chain at '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.0': BUS="pci" ID="0000:02:01.0" SYSFS{class}="0x020000" SYSFS{detach_state}="0" SYSFS{device}="0x101e" SYSFS{irq}="11" SYSFS{subsystem_device}="0x0549" SYSFS{subsystem_vendor}="0x1014" SYSFS{vendor}="0x8086" The matching device will be renamed to the given name. The device name will not be put into the udev database, cause the kernel renames the device and the sysfs name disappears. I like it, cause it plugs in nicely. We have all the naming features and sysfs queries and walks inside of udev. The sysfs timing races are already solved and the management tools are working for net devices too. nameif can only match the MAC address now. udev can match any sysfs value of the device tree the net device is connected to. But right, net devices do not have device nodes :)
2004-03-25 10:19:39 +03:00
sk = socket(PF_INET, SOCK_DGRAM, 0);
if (sk < 0) {
dbg("error opening socket");
return -1;
}
memset(&ifr, 0x00, sizeof(struct ifreq));
strfieldcpy(ifr.ifr_name, udev->kernel_name);
strfieldcpy(ifr.ifr_newname, udev->name);
[PATCH] hmm, handle net devices with udev? Hmm, Arndt Bergmann sent a patch like this one a few weeks ago and I want to bring the question back, if we want to handle net device naming with udev. With this patch it is actually possible to specify something like this in udev.rules: KERNEL="dummy*", SYSFS{address}="00:00:00:00:00:00", SYSFS{features}="0x0", NAME="blind%n" KERNEL="eth*", SYSFS{address}="00:0d:60:77:30:91", NAME="private" and you will get: [root@pim udev.kay]# cat /proc/net/dev Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 1500 30 0 0 0 0 0 0 1500 30 0 0 0 0 0 0 private: 278393 1114 0 0 0 0 0 0 153204 1468 0 0 0 0 0 0 sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blind0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 The udevinfo program is also working: [root@pim udev.kay]# ./udevinfo -a -p /sys/class/net/private looking at class device '/sys/class/net/private': SYSFS{addr_len}="6" SYSFS{address}="00:0d:60:77:30:91" SYSFS{broadcast}="ff:ff:ff:ff:ff:ff" SYSFS{features}="0x3a9" SYSFS{flags}="0x1003" SYSFS{ifindex}="2" SYSFS{iflink}="2" SYSFS{mtu}="1500" SYSFS{tx_queue_len}="1000" SYSFS{type}="1" follow the class device's "device" looking at the device chain at '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.0': BUS="pci" ID="0000:02:01.0" SYSFS{class}="0x020000" SYSFS{detach_state}="0" SYSFS{device}="0x101e" SYSFS{irq}="11" SYSFS{subsystem_device}="0x0549" SYSFS{subsystem_vendor}="0x1014" SYSFS{vendor}="0x8086" The matching device will be renamed to the given name. The device name will not be put into the udev database, cause the kernel renames the device and the sysfs name disappears. I like it, cause it plugs in nicely. We have all the naming features and sysfs queries and walks inside of udev. The sysfs timing races are already solved and the management tools are working for net devices too. nameif can only match the MAC address now. udev can match any sysfs value of the device tree the net device is connected to. But right, net devices do not have device nodes :)
2004-03-25 10:19:39 +03:00
retval = ioctl(sk, SIOCSIFNAME, &ifr);
if (retval != 0)
dbg("error changing net interface name");
close(sk);
[PATCH] hmm, handle net devices with udev? Hmm, Arndt Bergmann sent a patch like this one a few weeks ago and I want to bring the question back, if we want to handle net device naming with udev. With this patch it is actually possible to specify something like this in udev.rules: KERNEL="dummy*", SYSFS{address}="00:00:00:00:00:00", SYSFS{features}="0x0", NAME="blind%n" KERNEL="eth*", SYSFS{address}="00:0d:60:77:30:91", NAME="private" and you will get: [root@pim udev.kay]# cat /proc/net/dev Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 1500 30 0 0 0 0 0 0 1500 30 0 0 0 0 0 0 private: 278393 1114 0 0 0 0 0 0 153204 1468 0 0 0 0 0 0 sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blind0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 The udevinfo program is also working: [root@pim udev.kay]# ./udevinfo -a -p /sys/class/net/private looking at class device '/sys/class/net/private': SYSFS{addr_len}="6" SYSFS{address}="00:0d:60:77:30:91" SYSFS{broadcast}="ff:ff:ff:ff:ff:ff" SYSFS{features}="0x3a9" SYSFS{flags}="0x1003" SYSFS{ifindex}="2" SYSFS{iflink}="2" SYSFS{mtu}="1500" SYSFS{tx_queue_len}="1000" SYSFS{type}="1" follow the class device's "device" looking at the device chain at '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.0': BUS="pci" ID="0000:02:01.0" SYSFS{class}="0x020000" SYSFS{detach_state}="0" SYSFS{device}="0x101e" SYSFS{irq}="11" SYSFS{subsystem_device}="0x0549" SYSFS{subsystem_vendor}="0x1014" SYSFS{vendor}="0x8086" The matching device will be renamed to the given name. The device name will not be put into the udev database, cause the kernel renames the device and the sysfs name disappears. I like it, cause it plugs in nicely. We have all the naming features and sysfs queries and walks inside of udev. The sysfs timing races are already solved and the management tools are working for net devices too. nameif can only match the MAC address now. udev can match any sysfs value of the device tree the net device is connected to. But right, net devices do not have device nodes :)
2004-03-25 10:19:39 +03:00
return retval;
}
int udev_add_device(struct udevice *udev, struct sysfs_class_device *class_dev)
{
[PATCH] netdev - udevdb+dev.d changes Here is a patch to change the netdev handling in the database and for the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has no sysinfo(). o netdev's are also put into our database now. I want this for the udevruler gui to get a list of all handled devices. All devices in the db are stamped with the system uptime value at the creation time. 'udevinfo -d' prints it. o the DEVPATH value is the key for udevdb, but if we rename a netdev, the name is replaced in the kernel, so we add the changed name to the db to match with the remove event. NOTE: The dev.d/ scripts still get the original name from the hotplug call. Should we replace DEVPATH with the new name too? o We now only add a device to the db, if we have successfully created the main node or successfully renamed a netdev. This is the main part of the patch, cause I needed to clean the retval passing trough all the functions used for node creation. o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too. Can we change the name? o I've added a UDEV_NO_DEVD to possibly skip the script execution and used it in udev-test.pl. udevstart is the same horror now, if you have scripts with logging statements in dev.d/ it takes minutes to finish, can we skip the scripts here too? o The get_device_type() function is changed to be more strict, cause 'udevinfo -a -p /block/' gets a class device for it and tries to print the major/minor values. o bugfix, the RESULT value has now a working newline removal and a test for this case.
2004-04-01 11:12:57 +04:00
char *pos;
int retval = 0;
if (udev->type == 'b' || udev->type == 'c') {
retval = get_major_minor(class_dev, udev);
[PATCH] hmm, handle net devices with udev? Hmm, Arndt Bergmann sent a patch like this one a few weeks ago and I want to bring the question back, if we want to handle net device naming with udev. With this patch it is actually possible to specify something like this in udev.rules: KERNEL="dummy*", SYSFS{address}="00:00:00:00:00:00", SYSFS{features}="0x0", NAME="blind%n" KERNEL="eth*", SYSFS{address}="00:0d:60:77:30:91", NAME="private" and you will get: [root@pim udev.kay]# cat /proc/net/dev Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 1500 30 0 0 0 0 0 0 1500 30 0 0 0 0 0 0 private: 278393 1114 0 0 0 0 0 0 153204 1468 0 0 0 0 0 0 sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blind0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 The udevinfo program is also working: [root@pim udev.kay]# ./udevinfo -a -p /sys/class/net/private looking at class device '/sys/class/net/private': SYSFS{addr_len}="6" SYSFS{address}="00:0d:60:77:30:91" SYSFS{broadcast}="ff:ff:ff:ff:ff:ff" SYSFS{features}="0x3a9" SYSFS{flags}="0x1003" SYSFS{ifindex}="2" SYSFS{iflink}="2" SYSFS{mtu}="1500" SYSFS{tx_queue_len}="1000" SYSFS{type}="1" follow the class device's "device" looking at the device chain at '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.0': BUS="pci" ID="0000:02:01.0" SYSFS{class}="0x020000" SYSFS{detach_state}="0" SYSFS{device}="0x101e" SYSFS{irq}="11" SYSFS{subsystem_device}="0x0549" SYSFS{subsystem_vendor}="0x1014" SYSFS{vendor}="0x8086" The matching device will be renamed to the given name. The device name will not be put into the udev database, cause the kernel renames the device and the sysfs name disappears. I like it, cause it plugs in nicely. We have all the naming features and sysfs queries and walks inside of udev. The sysfs timing races are already solved and the management tools are working for net devices too. nameif can only match the MAC address now. udev can match any sysfs value of the device tree the net device is connected to. But right, net devices do not have device nodes :)
2004-03-25 10:19:39 +03:00
if (retval != 0) {
dbg("no dev-file found, do nothing");
return 0;
[PATCH] hmm, handle net devices with udev? Hmm, Arndt Bergmann sent a patch like this one a few weeks ago and I want to bring the question back, if we want to handle net device naming with udev. With this patch it is actually possible to specify something like this in udev.rules: KERNEL="dummy*", SYSFS{address}="00:00:00:00:00:00", SYSFS{features}="0x0", NAME="blind%n" KERNEL="eth*", SYSFS{address}="00:0d:60:77:30:91", NAME="private" and you will get: [root@pim udev.kay]# cat /proc/net/dev Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 1500 30 0 0 0 0 0 0 1500 30 0 0 0 0 0 0 private: 278393 1114 0 0 0 0 0 0 153204 1468 0 0 0 0 0 0 sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blind0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 The udevinfo program is also working: [root@pim udev.kay]# ./udevinfo -a -p /sys/class/net/private looking at class device '/sys/class/net/private': SYSFS{addr_len}="6" SYSFS{address}="00:0d:60:77:30:91" SYSFS{broadcast}="ff:ff:ff:ff:ff:ff" SYSFS{features}="0x3a9" SYSFS{flags}="0x1003" SYSFS{ifindex}="2" SYSFS{iflink}="2" SYSFS{mtu}="1500" SYSFS{tx_queue_len}="1000" SYSFS{type}="1" follow the class device's "device" looking at the device chain at '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.0': BUS="pci" ID="0000:02:01.0" SYSFS{class}="0x020000" SYSFS{detach_state}="0" SYSFS{device}="0x101e" SYSFS{irq}="11" SYSFS{subsystem_device}="0x0549" SYSFS{subsystem_vendor}="0x1014" SYSFS{vendor}="0x8086" The matching device will be renamed to the given name. The device name will not be put into the udev database, cause the kernel renames the device and the sysfs name disappears. I like it, cause it plugs in nicely. We have all the naming features and sysfs queries and walks inside of udev. The sysfs timing races are already solved and the management tools are working for net devices too. nameif can only match the MAC address now. udev can match any sysfs value of the device tree the net device is connected to. But right, net devices do not have device nodes :)
2004-03-25 10:19:39 +03:00
}
}
if (namedev_name_device(udev, class_dev) != 0)
goto exit;
dbg("adding name='%s'", udev->name);
[PATCH] netdev - udevdb+dev.d changes Here is a patch to change the netdev handling in the database and for the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has no sysinfo(). o netdev's are also put into our database now. I want this for the udevruler gui to get a list of all handled devices. All devices in the db are stamped with the system uptime value at the creation time. 'udevinfo -d' prints it. o the DEVPATH value is the key for udevdb, but if we rename a netdev, the name is replaced in the kernel, so we add the changed name to the db to match with the remove event. NOTE: The dev.d/ scripts still get the original name from the hotplug call. Should we replace DEVPATH with the new name too? o We now only add a device to the db, if we have successfully created the main node or successfully renamed a netdev. This is the main part of the patch, cause I needed to clean the retval passing trough all the functions used for node creation. o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too. Can we change the name? o I've added a UDEV_NO_DEVD to possibly skip the script execution and used it in udev-test.pl. udevstart is the same horror now, if you have scripts with logging statements in dev.d/ it takes minutes to finish, can we skip the scripts here too? o The get_device_type() function is changed to be more strict, cause 'udevinfo -a -p /block/' gets a class device for it and tries to print the major/minor values. o bugfix, the RESULT value has now a working newline removal and a test for this case.
2004-04-01 11:12:57 +04:00
selinux_init();
if (udev->type == 'b' || udev->type == 'c') {
retval = create_node(udev);
if (retval != 0)
[PATCH] netdev - udevdb+dev.d changes Here is a patch to change the netdev handling in the database and for the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has no sysinfo(). o netdev's are also put into our database now. I want this for the udevruler gui to get a list of all handled devices. All devices in the db are stamped with the system uptime value at the creation time. 'udevinfo -d' prints it. o the DEVPATH value is the key for udevdb, but if we rename a netdev, the name is replaced in the kernel, so we add the changed name to the db to match with the remove event. NOTE: The dev.d/ scripts still get the original name from the hotplug call. Should we replace DEVPATH with the new name too? o We now only add a device to the db, if we have successfully created the main node or successfully renamed a netdev. This is the main part of the patch, cause I needed to clean the retval passing trough all the functions used for node creation. o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too. Can we change the name? o I've added a UDEV_NO_DEVD to possibly skip the script execution and used it in udev-test.pl. udevstart is the same horror now, if you have scripts with logging statements in dev.d/ it takes minutes to finish, can we skip the scripts here too? o The get_device_type() function is changed to be more strict, cause 'udevinfo -a -p /block/' gets a class device for it and tries to print the major/minor values. o bugfix, the RESULT value has now a working newline removal and a test for this case.
2004-04-01 11:12:57 +04:00
goto exit;
if (udevdb_add_dev(udev) != 0)
dbg("udevdb_add_dev failed, but we create the node anyway, "
"remove might not work for custom names");
[PATCH] hmm, handle net devices with udev? Hmm, Arndt Bergmann sent a patch like this one a few weeks ago and I want to bring the question back, if we want to handle net device naming with udev. With this patch it is actually possible to specify something like this in udev.rules: KERNEL="dummy*", SYSFS{address}="00:00:00:00:00:00", SYSFS{features}="0x0", NAME="blind%n" KERNEL="eth*", SYSFS{address}="00:0d:60:77:30:91", NAME="private" and you will get: [root@pim udev.kay]# cat /proc/net/dev Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 1500 30 0 0 0 0 0 0 1500 30 0 0 0 0 0 0 private: 278393 1114 0 0 0 0 0 0 153204 1468 0 0 0 0 0 0 sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blind0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 The udevinfo program is also working: [root@pim udev.kay]# ./udevinfo -a -p /sys/class/net/private looking at class device '/sys/class/net/private': SYSFS{addr_len}="6" SYSFS{address}="00:0d:60:77:30:91" SYSFS{broadcast}="ff:ff:ff:ff:ff:ff" SYSFS{features}="0x3a9" SYSFS{flags}="0x1003" SYSFS{ifindex}="2" SYSFS{iflink}="2" SYSFS{mtu}="1500" SYSFS{tx_queue_len}="1000" SYSFS{type}="1" follow the class device's "device" looking at the device chain at '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.0': BUS="pci" ID="0000:02:01.0" SYSFS{class}="0x020000" SYSFS{detach_state}="0" SYSFS{device}="0x101e" SYSFS{irq}="11" SYSFS{subsystem_device}="0x0549" SYSFS{subsystem_vendor}="0x1014" SYSFS{vendor}="0x8086" The matching device will be renamed to the given name. The device name will not be put into the udev database, cause the kernel renames the device and the sysfs name disappears. I like it, cause it plugs in nicely. We have all the naming features and sysfs queries and walks inside of udev. The sysfs timing races are already solved and the management tools are working for net devices too. nameif can only match the MAC address now. udev can match any sysfs value of the device tree the net device is connected to. But right, net devices do not have device nodes :)
2004-03-25 10:19:39 +03:00
/* use full path to the environment */
snprintf(udev->devname, NAME_SIZE-1, "%s%s", udev_root, udev->name);
} else if (udev->type == 'n') {
/* look if we want to change the name of the netif */
if (strcmp(udev->name, udev->kernel_name) != 0) {
retval = rename_net_if(udev);
if (retval != 0)
[PATCH] netdev - udevdb+dev.d changes Here is a patch to change the netdev handling in the database and for the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has no sysinfo(). o netdev's are also put into our database now. I want this for the udevruler gui to get a list of all handled devices. All devices in the db are stamped with the system uptime value at the creation time. 'udevinfo -d' prints it. o the DEVPATH value is the key for udevdb, but if we rename a netdev, the name is replaced in the kernel, so we add the changed name to the db to match with the remove event. NOTE: The dev.d/ scripts still get the original name from the hotplug call. Should we replace DEVPATH with the new name too? o We now only add a device to the db, if we have successfully created the main node or successfully renamed a netdev. This is the main part of the patch, cause I needed to clean the retval passing trough all the functions used for node creation. o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too. Can we change the name? o I've added a UDEV_NO_DEVD to possibly skip the script execution and used it in udev-test.pl. udevstart is the same horror now, if you have scripts with logging statements in dev.d/ it takes minutes to finish, can we skip the scripts here too? o The get_device_type() function is changed to be more strict, cause 'udevinfo -a -p /block/' gets a class device for it and tries to print the major/minor values. o bugfix, the RESULT value has now a working newline removal and a test for this case.
2004-04-01 11:12:57 +04:00
goto exit;
/* we've changed the name, now fake the devpath,
* cause original kernel name sleeps with the fishes
* and we don't get any event from the kernel now
[PATCH] netdev - udevdb+dev.d changes Here is a patch to change the netdev handling in the database and for the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has no sysinfo(). o netdev's are also put into our database now. I want this for the udevruler gui to get a list of all handled devices. All devices in the db are stamped with the system uptime value at the creation time. 'udevinfo -d' prints it. o the DEVPATH value is the key for udevdb, but if we rename a netdev, the name is replaced in the kernel, so we add the changed name to the db to match with the remove event. NOTE: The dev.d/ scripts still get the original name from the hotplug call. Should we replace DEVPATH with the new name too? o We now only add a device to the db, if we have successfully created the main node or successfully renamed a netdev. This is the main part of the patch, cause I needed to clean the retval passing trough all the functions used for node creation. o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too. Can we change the name? o I've added a UDEV_NO_DEVD to possibly skip the script execution and used it in udev-test.pl. udevstart is the same horror now, if you have scripts with logging statements in dev.d/ it takes minutes to finish, can we skip the scripts here too? o The get_device_type() function is changed to be more strict, cause 'udevinfo -a -p /block/' gets a class device for it and tries to print the major/minor values. o bugfix, the RESULT value has now a working newline removal and a test for this case.
2004-04-01 11:12:57 +04:00
*/
pos = strrchr(udev->devpath, '/');
[PATCH] netdev - udevdb+dev.d changes Here is a patch to change the netdev handling in the database and for the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has no sysinfo(). o netdev's are also put into our database now. I want this for the udevruler gui to get a list of all handled devices. All devices in the db are stamped with the system uptime value at the creation time. 'udevinfo -d' prints it. o the DEVPATH value is the key for udevdb, but if we rename a netdev, the name is replaced in the kernel, so we add the changed name to the db to match with the remove event. NOTE: The dev.d/ scripts still get the original name from the hotplug call. Should we replace DEVPATH with the new name too? o We now only add a device to the db, if we have successfully created the main node or successfully renamed a netdev. This is the main part of the patch, cause I needed to clean the retval passing trough all the functions used for node creation. o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too. Can we change the name? o I've added a UDEV_NO_DEVD to possibly skip the script execution and used it in udev-test.pl. udevstart is the same horror now, if you have scripts with logging statements in dev.d/ it takes minutes to finish, can we skip the scripts here too? o The get_device_type() function is changed to be more strict, cause 'udevinfo -a -p /block/' gets a class device for it and tries to print the major/minor values. o bugfix, the RESULT value has now a working newline removal and a test for this case.
2004-04-01 11:12:57 +04:00
if (pos != NULL) {
pos[1] = '\0';
strfieldcat(udev->devpath, udev->name);
setenv("DEVPATH", udev->devpath, 1);
[PATCH] netdev - udevdb+dev.d changes Here is a patch to change the netdev handling in the database and for the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has no sysinfo(). o netdev's are also put into our database now. I want this for the udevruler gui to get a list of all handled devices. All devices in the db are stamped with the system uptime value at the creation time. 'udevinfo -d' prints it. o the DEVPATH value is the key for udevdb, but if we rename a netdev, the name is replaced in the kernel, so we add the changed name to the db to match with the remove event. NOTE: The dev.d/ scripts still get the original name from the hotplug call. Should we replace DEVPATH with the new name too? o We now only add a device to the db, if we have successfully created the main node or successfully renamed a netdev. This is the main part of the patch, cause I needed to clean the retval passing trough all the functions used for node creation. o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too. Can we change the name? o I've added a UDEV_NO_DEVD to possibly skip the script execution and used it in udev-test.pl. udevstart is the same horror now, if you have scripts with logging statements in dev.d/ it takes minutes to finish, can we skip the scripts here too? o The get_device_type() function is changed to be more strict, cause 'udevinfo -a -p /block/' gets a class device for it and tries to print the major/minor values. o bugfix, the RESULT value has now a working newline removal and a test for this case.
2004-04-01 11:12:57 +04:00
}
/* use netif name for the environment */
strfieldcpy(udev->devname, udev->name);
}
[PATCH] hmm, handle net devices with udev? Hmm, Arndt Bergmann sent a patch like this one a few weeks ago and I want to bring the question back, if we want to handle net device naming with udev. With this patch it is actually possible to specify something like this in udev.rules: KERNEL="dummy*", SYSFS{address}="00:00:00:00:00:00", SYSFS{features}="0x0", NAME="blind%n" KERNEL="eth*", SYSFS{address}="00:0d:60:77:30:91", NAME="private" and you will get: [root@pim udev.kay]# cat /proc/net/dev Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 1500 30 0 0 0 0 0 0 1500 30 0 0 0 0 0 0 private: 278393 1114 0 0 0 0 0 0 153204 1468 0 0 0 0 0 0 sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blind0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 The udevinfo program is also working: [root@pim udev.kay]# ./udevinfo -a -p /sys/class/net/private looking at class device '/sys/class/net/private': SYSFS{addr_len}="6" SYSFS{address}="00:0d:60:77:30:91" SYSFS{broadcast}="ff:ff:ff:ff:ff:ff" SYSFS{features}="0x3a9" SYSFS{flags}="0x1003" SYSFS{ifindex}="2" SYSFS{iflink}="2" SYSFS{mtu}="1500" SYSFS{tx_queue_len}="1000" SYSFS{type}="1" follow the class device's "device" looking at the device chain at '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.0': BUS="pci" ID="0000:02:01.0" SYSFS{class}="0x020000" SYSFS{detach_state}="0" SYSFS{device}="0x101e" SYSFS{irq}="11" SYSFS{subsystem_device}="0x0549" SYSFS{subsystem_vendor}="0x1014" SYSFS{vendor}="0x8086" The matching device will be renamed to the given name. The device name will not be put into the udev database, cause the kernel renames the device and the sysfs name disappears. I like it, cause it plugs in nicely. We have all the naming features and sysfs queries and walks inside of udev. The sysfs timing races are already solved and the management tools are working for net devices too. nameif can only match the MAC address now. udev can match any sysfs value of the device tree the net device is connected to. But right, net devices do not have device nodes :)
2004-03-25 10:19:39 +03:00
}
exit:
selinux_restore();
return retval;
}