systemd-stable/units/systemd-networkd.service.in

#  This file is part of systemd.
#
#  systemd is free software; you can redistribute it and/or modify it
#  under the terms of the GNU Lesser General Public License as published by
#  the Free Software Foundation; either version 2.1 of the License, or
#  (at your option) any later version.

[Unit]
Description=Network Service
Documentation=man:systemd-networkd.service(8)
ConditionCapability=CAP_NET_ADMIN
DefaultDependencies=no
After=dbus.service network-pre.target systemd-sysusers.service
Before=network.target multi-user.target shutdown.target
Conflicts=shutdown.target
Wants=network.target

[Service]
Type=notify
Restart=always
RestartSec=0
ExecStart=@rootlibexecdir@/systemd-networkd
CapabilityBoundingSet=CAP_NET_ADMIN CAP_NET_BIND_SERVICE CAP_NET_BROADCAST CAP_NET_RAW CAP_SETUID CAP_SETGID CAP_SETPCAP CAP_CHOWN CAP_DAC_OVERRIDE CAP_FOWNER
ProtectSystem=full
ProtectHome=yes
WatchdogSec=1min

[Install]
WantedBy=multi-user.target
networkd: add a basic network daemon This daemon listens for and configures network devices tagged with 'systemd-networkd'. By default, no devices are tagged so this daemon can safely run in parallel with existing network daemons/scripts. Networks are configured in /etc/systemd/network/*.network. The first .network file that matches a given link is applied. The matching logic is similar to the one for .link files, but additionally supports matching on interface name. The mid-term aim is to provide an alternative to ad-hoc scripts currently used in initrd's and for wired setups that don't change much (e.g., as seen on servers/and some embedded systems). Currently, static addresses and a gateway can be configured. Example .network file: [Match] Name=wlp2s0 [Network] Description=My Network Gateway=192.168.1.1 Address=192.168.1.23/24 Address=fe80::9aee:94ff:fe3f:c618/64 2013-10-17 05:18:36 +04:00			`# This file is part of systemd.`
			`#`
			`# systemd is free software; you can redistribute it and/or modify it`
			`# under the terms of the GNU Lesser General Public License as published by`
			`# the Free Software Foundation; either version 2.1 of the License, or`
			`# (at your option) any later version.`

			`[Unit]`
			`Description=Network Service`
			`Documentation=man:systemd-networkd.service(8)`
units: minor cleanups 2014-06-17 04:18:33 +04:00			`ConditionCapability=CAP_NET_ADMIN`
networkd: add a basic network daemon This daemon listens for and configures network devices tagged with 'systemd-networkd'. By default, no devices are tagged so this daemon can safely run in parallel with existing network daemons/scripts. Networks are configured in /etc/systemd/network/*.network. The first .network file that matches a given link is applied. The matching logic is similar to the one for .link files, but additionally supports matching on interface name. The mid-term aim is to provide an alternative to ad-hoc scripts currently used in initrd's and for wired setups that don't change much (e.g., as seen on servers/and some embedded systems). Currently, static addresses and a gateway can be configured. Example .network file: [Match] Name=wlp2s0 [Network] Description=My Network Gateway=192.168.1.1 Address=192.168.1.23/24 Address=fe80::9aee:94ff:fe3f:c618/64 2013-10-17 05:18:36 +04:00			`DefaultDependencies=no`
units: rebuild /etc/passwd, the udev hwdb and the journal catalog files on boot Only when necessary of course, nicely guarded with the new ConditionNeedsUpdate= condition we added. 2014-06-13 15:10:30 +04:00			`After=dbus.service network-pre.target systemd-sysusers.service`
units: minor cleanups 2014-06-17 04:18:33 +04:00			`Before=network.target multi-user.target shutdown.target`
			`Conflicts=shutdown.target`
networkd: add a basic network daemon This daemon listens for and configures network devices tagged with 'systemd-networkd'. By default, no devices are tagged so this daemon can safely run in parallel with existing network daemons/scripts. Networks are configured in /etc/systemd/network/*.network. The first .network file that matches a given link is applied. The matching logic is similar to the one for .link files, but additionally supports matching on interface name. The mid-term aim is to provide an alternative to ad-hoc scripts currently used in initrd's and for wired setups that don't change much (e.g., as seen on servers/and some embedded systems). Currently, static addresses and a gateway can be configured. Example .network file: [Match] Name=wlp2s0 [Network] Description=My Network Gateway=192.168.1.1 Address=192.168.1.23/24 Address=fe80::9aee:94ff:fe3f:c618/64 2013-10-17 05:18:36 +04:00			`Wants=network.target`

			`[Service]`
networkd: use Type=notify Also start earlier during boot. 2013-11-23 05:07:08 +04:00			`Type=notify`
networkd: add a basic network daemon This daemon listens for and configures network devices tagged with 'systemd-networkd'. By default, no devices are tagged so this daemon can safely run in parallel with existing network daemons/scripts. Networks are configured in /etc/systemd/network/*.network. The first .network file that matches a given link is applied. The matching logic is similar to the one for .link files, but additionally supports matching on interface name. The mid-term aim is to provide an alternative to ad-hoc scripts currently used in initrd's and for wired setups that don't change much (e.g., as seen on servers/and some embedded systems). Currently, static addresses and a gateway can be configured. Example .network file: [Match] Name=wlp2s0 [Network] Description=My Network Gateway=192.168.1.1 Address=192.168.1.23/24 Address=fe80::9aee:94ff:fe3f:c618/64 2013-10-17 05:18:36 +04:00			`Restart=always`
			`RestartSec=0`
			`ExecStart=@rootlibexecdir@/systemd-networkd`
networkd: drop CAP_SYS_MODULE Rely on modules being built-in or autoloaded on-demand. As networkd is a network facing service, we want to limits its capabilities, as much as possible. Also, we may not have CAP_SYS_MODULE in a container, and we want networkd to work the same there. Module autoloading does not always work, but should be fixed by the kernel patch f98f89a0104454f35a: 'net: tunnels - enable module autoloading', which is currently in net-next and which people may consider backporting if they want tunneling support without compiling in the modules. Early adopters may also use a module-load.d snippet and order systemd-modules-load.service before networkd to force the module loading of tunneling modules. This sholud fix the various build issues people have reported. 2014-06-02 23:50:50 +04:00			`CapabilityBoundingSet=CAP_NET_ADMIN CAP_NET_BIND_SERVICE CAP_NET_BROADCAST CAP_NET_RAW CAP_SETUID CAP_SETGID CAP_SETPCAP CAP_CHOWN CAP_DAC_OVERRIDE CAP_FOWNER`
core: rename ReadOnlySystem= to ProtectSystem= and add a third value for also mounting /etc read-only Also, rename ProtectedHome= to ProtectHome=, to simplify things a bit. With this in place we now have two neat options ProtectSystem= and ProtectHome= for protecting the OS itself (and optionally its configuration), and for protecting the user's data. 2014-06-04 20:07:55 +04:00			`ProtectSystem=full`
			`ProtectHome=yes`
event: hook up sd-event with the service watchdog logic Adds a new call sd_event_set_watchdog() that can be used to hook up the event loop with the watchdog supervision logic of systemd. If enabled and $WATCHDOG_USEC is set the event loop will ping the invoking systemd daemon right after coming back from epoll_wait() but not more often than $WATCHDOG_USEC/4. The epoll_wait() will sleep no longer than $WATCHDOG_USEC/4*3, to make sure the service manager is called in time. This means that setting WatchdogSec= in a .service file and calling sd_event_set_watchdog() in your daemon is enough to hook it up with the watchdog logic. 2013-12-11 21:14:52 +04:00			`WatchdogSec=1min`
install: do not statically enable systemd-networkd [tomegun: pruned the commit message as not to contradict the follow-up commit] 2014-02-21 07:38:17 +04:00
			`[Install]`
			`WantedBy=multi-user.target`