IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Say that r should be declared at the top of the function.
Don't say that fixed buffers result in truncation, right after saying that they
must only be used if size is known.
Adjust order of examples to be consistent.
This catches up homed's FIDO2 support with cryptsetup's: we'll now store
the uv/up/clientPin configuration at enrollment in the user record JSON
data, and use it when authenticating with it.
This also adds explicit "uv" support: we'll only allow it to happen when
the client explicity said it's OK. This is then used by clients to print
a nice message suggesting "uv" has to take place before retrying
allowing it this time. This is modelled after the existing handling for
"up".
This allows to limit units to machines that run on a certain firmware
type. For device tree defined machines checking against the machine's
compatible is also possible.
See https://bugzilla.redhat.com/show_bug.cgi?id=1893417 for the back story:
the fallback hostname matters a lot in certain environments. Right now the only
way to configure the fallback hostname is by recompiling systemd, which is
obviously problematic in case when the fallback hostname shall differ between
different editions of the same distro that share a single compiled rpm.
By making this overridable through an envvar, we're providing an escape hatch
without making this a top-level api. Later on a way to set this through
os-release is added, but I think the approach with the variable is still
useful. It it very convenient for testing, or to override settings only in a
particular service, etc.
This updates the docs about using fdisk/gdisk to make partitions with the right
partition type UUID as defined in the discoverable partitions spec.
Improve wording/grammar/formatting, and reflect that gdisk supports this as
well nowadays; see https://www.rodsbooks.com/gdisk/revisions.html
The wiki was slightly stale, and almost all the information there
was already present in the man page. I moved the remaing part (discussion)
into the man page and adjusted all links to point to the man page instead.
daemon(7) has a some examples of packaging scriptlets… I don't think it fits
there very well. Most likely they should be moved to systemd.preset(5) or maybe
even removed, but I'm leaving that for later.
Very old versions of meson did not include the subdirectory name in the
target name, so we started adding various "top-level" custom targets in
subdirectories. This was nice because the main meson.build file wasn't
as cluttered. But then meson started including the subdir name in the
target name. So let's move the definition to the root so we can have all
targets named uniformly.
While it's perfectly possible today to completely rely on mkosi for
building and testing systemd, to get code completion and other IDE
niceties to work properly, it's still necessary to build systemd
locally.
Recently, mkosi gained the ability to allow external programs to
communicate with the build script. We can use this feature to run
the clangd language server in the mkosi build image via a custom
build script to provide IDE features in editors without requiring
developers to build systemd on the host or install any of systemd's
build dependencies locally.
This commit adds the necessary information on how to set this up
to HACKING.md.
This adds the support for veritytab.
The veritytab file contains at most five fields, the first four are
mandatory, the last one is optional:
- The first field contains the name of the resulting verity volume; its
block device is set up /dev/mapper/</filename>.
- The second field contains a path to the underlying block data device,
or a specification of a block device via UUID= followed by the UUID.
- The third field contains a path to the underlying block hash device,
or a specification of a block device via UUID= followed by the UUID.
- The fourth field is the roothash in hexadecimal.
- The fifth field, if present, is a comma-delimited list of options.
The following options are recognized only: ignore-corruption,
restart-on-corruption, panic-on-corruption, ignore-zero-blocks,
check-at-most-once and root-hash-signature. The others options will
be implemented later.
Also, this adds support for the new kernel verity command line boolean
option "veritytab" which enables the read for veritytab, and the new
environment variable SYSTEMD_VERITYTAB which sets the path to the file
veritytab to read.
Sometimes, non-ramfs initrd root are useful. Eg, for kdump, because
initramfs is memory consuming, so mount a compressed image in earlier
initrd, chroot into it then let systemd do the rest of job is a good
solution.
But systemd doesn't recognize the initrd environment if rootfs is not a
temporary fs. This is a reasonable check, because switch-root in initrd
will wipe the whole rootfs, will be a disaster if there are any
misdetect.
So extend SYSTEMD_IN_INITRD environment variable, now it accepts boolean
value and two extra keyword, "auto" and "lenient". "auto" is same as
before, and it's the default value. "lenient" will let systemd bypass
the rootfs check.
The boot loader specification link points to the boot loader interface
documentation.
This fixes the link to point to BOOT_LOADER_SPECIFICATION instead of
BOOTLOADER_INTERFACE which is itself.
This only changes documentation. In various places we call "ninja"
directly. I figured it would be safer to leave those in place for now,
given the meson replacement commands lines appears to be supported in
newer meson versions only.
FixedRandomDelay=yes will use
`siphash24(sd_id128_get_machine() || MANAGER_IS_SYSTEM(m) || getuid() || u->id)`,
where || is concatenation, instead of a random number to choose a value between
0 and RandomizedDelaySec= as the timer delay.
This essentially sets up a fixed, but seemingly random, offset for each timer
iteration rather than having a random offset recalculated each time it fires.
Closes#10355
Co-author: Anita Zhang <the.anitazha@gmail.com>
Primarily:
1. Mention that we prefer if return parameters carry "ret_" as prefix in
their name
2. Clarify that debug-level logging is always OK, and irrelevant to when
deciding whether a function is logging or non-logging.
We have three somewhat separate ideas: what the directory is for, what $TMPDIR is for, and security considerations.
Let's use paragraphs.
Also, conjunctions in titles aren't capitalized usually.
It makes little sense to make the boundary between systemd and user guids
configurable. Nevertheless, a completely fixed compile-time define is not
enough in two scenarios:
- the systemd_uid_max boundary has moved over time. The default used to be
500 for a long time. Systems which are upgraded over time might have users
in the wrong range, but changing existing systems is complicated and
expensive (offline disks, backups, remote systems, read-only media, etc.)
- systems are used in a heterogenous enviornment, where some vendors pick
one value and others another.
So let's make this boundary overridable using /etc/login.defs.
Fixes#3855, #10184.
This means that the dbus doc consistency checks will be enabled by default,
including in the CI. I think that will work better than current state where
people do not enable them and them follow-up patches for the docs like the
parent commit must be had.
With new directive SystemCallLog= it's possible to list system calls to be
logged. This can be used for auditing or temporarily when constructing system
call filters.
---
v5: drop intermediary, update HASHMAP_FOREACH_KEY() use
v4: skip useless debug messages, actually parse directive
v3: don't declare unused variables with old libseccomp
v2: fix build without seccomp or old libseccomp
Kernel 5.8 gained a hidepid= implementation that is truly per procfs,
which allows us to mount a distinct once into every unit, with
individual hidepid= settings. Let's expose this via two new settings:
ProtectProc= (wrapping hidpid=) and ProcSubset= (wrapping subset=).
Replaces: #11670
This specification is useful independently of UEFI, so avoid making assertions
about UEFI. Also reword the intro to say what this is about in the very first
sentence. Closes#16570.
Defaulting to fedora makes it a pain to override mkosi.default
point to one of the other mkosi settings files. Instead, have
every developer manually add the symlink to his distro
of choice and don't commit the symlink to the repository by
putting it in the .gitignore.
Now that we make the user/group name resolving available via userdb and
thus nss-systemd, we do not need the UID/GID resolving support in
nss-mymachines anymore. Let's drop it hence.
We keep the module around, since besides UID/GID resolving it also does
hostname resolving, which we care about. (One of those days we should
replace that by some Varlink logic between
nss-resolve/systemd-resolved.service too)
The hooks are kept in the NSS module, but they do not resolve anything
anymore, in order to keep compat at a maximum.
sssd people don't like enumeration and for some other cases it's not
nice to support either, in particular when synthesizing records for
container/userns UID/GID ranges.
Hence, let's make enumeration optional.
We'd like to use it for FIDO2 tokens too, and the concept is entirely
generic, hence let's just reuse the field, but rename it. Read the old
name for compatibility, and treat the old name and the new name as
identical for most purposes.
