IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This provides functionality similar to the ./configure --disable-manpages
switch. Man pages are built by default (if xsltproc is found), html pages
are not. Those default can be changed with -Dman=no, -Dhtml=yes/auto.
It is still possible to build one or the either, even if not configured, with
ninja-build man/man and ninja-build man/html.
v2:
- obey conditionals in index/directives list
This is a bit bare-bones, but should work for now. Maybe in the future we'll
have a way to make meson generate it for us, without specifying all the names
by hand.
It's crucial that we can build systemd using VS2010!
... er, wait, no, that's not the official reason. We need to shed old systems
by requring python 3! Oh, no, it's something else. Maybe we need to throw out
345 years of knowlege accumulated in autotools? Whatever, this new thing is
cool and shiny, let's use it.
This is not complete, I'm throwing it out here for your amusement and critique.
- rules for sd-boot are missing. Those might be quite complicated.
- rules for tests are missing too. Those are probably quite simple and
repetitive, but there's lots of them.
- it's likely that I didn't get all the conditions right, I only tested "full"
compilation where most deps are provided and nothing is disabled.
- busname.target and all .busname units are skipped on purpose.
Otherwise, installation into $DESTDIR has the same list of files and the
autoconf install, except for .la files.
It'd be great if people had a careful look at all the library linking options.
I added stuff until things compiled, and in the end there's much less linking
then in the old system. But it seems that there's still a lot of unnecessary
deps.
meson has a `shared_module` statement, which sounds like something appropriate
for our nss and pam modules. Unfortunately, I couldn't get it to work. For the
nss modules, we need an .so version of '2', but `shared_module` disallows the
version argument. For the pam module, it also didn't work, I forgot the reason.
The handling of .m4 and .in and .m4.in files is rather awkward. It's likely
that this could be simplified. If make support is ever dropped, I think it'd
make sense to switch to a different templating system so that two different
languages and not required, which would make everything simpler yet.
v2:
- use get_pkgconfig_variable
- use sh not bash
- use add_project_arguments
v3:
- drop required:true and fix progs/prog typo
v4:
- use find_library('bz2')
- add TTY_GID definition
- define __SANE_USERSPACE_TYPES__
- use join_paths(prefix, ...) is used on all paths to make them all absolute
v5:
- replace all declare_dependency's with []
- add more conf.get guards around optional components
v6:
- drop -pipe, -Wall which are the default in meson
- use compiler.has_function() and compiler.has_header_symbol instead of the
hand-rolled checks.
- fix duplication in 'liblibsystemd' library name
- use the right .sym file for pam_systemd
- rename 'compiler' to 'cc': shorter, and more idiomatic.
v7:
- use ENABLE_ENVIRONMENT_D not HAVE_ENVIRONMENT_D
- rename prefix to prefixdir, rootprefix to rootprefixdir
("prefix" is too common of a name and too easy to overwrite by mistake)
- wrap more stuff with conf.get('ENABLE...') == 1
- use rootprefix=='/' and rootbindir as install_dir, to fix paths under
split-usr==true.
v8:
- use .split() also for src/coredump. Now everything is consistent ;)
- add rootlibdir option and use it on the libraries that require it
v9:
- indentation
v10:
- fix check for qrencode and libaudit
v11:
- unify handling of executable paths, provide options for all progs
This makes the meson build behave slightly differently than the
autoconf-based one, because we always first try to find the executable in the
filesystem, and fall back to the default. I think different handling of
loadkeys, setfont, and telinit was just a historical accident.
In addition to checking in $PATH, also check /usr/sbin/, /sbin for programs.
In Fedora $PATH includes /usr/sbin, (and /sbin is is a symlink to /usr/sbin),
but in Debian, those directories are not included in the path.
C.f. https://github.com/mesonbuild/meson/issues/1576.
- call all the options 'xxx-path' for clarity.
- sort man/rules/meson.build properly so it's stable
--new-id works because it’s an unambiguous prefix, but the full option
name is --new-id128.
(#5381 did the same in one other manpage, but I didn’t check for other
manpages using the abbreviated version back then.)
This work based on Tom's original patch
teg@1312172
By setting GatewayOnlink=yes, the kernel will assume that the gateway is onlink
even if there is no route to it.
Resolves issue #1283.
Allow setting bridge port priority in the Bridge section of the network file,
similar to e.g. port path cost setting.
Set the default to an invalid value of 128, and only set the port priority when
it's not 128. Unlike e.g. path cost, zero is a valid priority value.
Add a networkd-test.py to check that bridge port priority is correctly set.
Incidently, fix bridge port cost type and document valid ranges.
So far, all sections of the systemd.special(7) man page used
<varlistentry> for listing the targets, with one exception: the
"Special Passive User Units" one. Let's clean this up and use the same
formatting everywhere.
Per man:file-hierarchy(7), /lib is just a compatibility symlink; the
other manpages also refer to /usr/lib.
Found with:
git grep -P '(?<!/usr|/var|local)/lib' man/
This work adds support for setting the IPv6 flow label for vxlan.
vxlan.netdev
NetDev]
Description=vxlan-test
Name=vxlan1
Kind=vxlan
[VXLAN]
Id=33
Local=2405:204:920b:29ac:7e7a:91ff:fe6d:ffe2
Remote=FF02:0:0:0:0:0:1:9
FlowLabel=104
ip -d link show vxlan1
8: vxlan1: <BROADCAST,MULTICAST> mtu 1430 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether be:83:aa:db:6b:cb brd ff:ff:ff:ff:ff:ff promiscuity 0
vxlan id 33 group ff02::1:9 local 2405:204:920b:29ac:7e7a:91ff:fe6d:ffe2 dev enp0s25 srcport 0 0 dstport 8472 flowlabel 0x68 ageing 300 noudpcsum noudp6zerocsumtx noudp6zerocsumrx addrgenmode eui64 numtxqueues 1 numrxqueues 1
[guest@fedora ~]$ coredumpctl
No coredumps found.
[guest@fedora ~]$ ./coredumpctl
Hint: You are currently not seeing messages from other users and the system.
Users in groups 'adm', 'systemd-journal', 'wheel' can see all messages.
Pass -q to turn off this notice.
No coredumps found.
Fixes#1733.
Add the 'convertible' type to the set of allowed chassis. This applies
to all devices that can be transformed by the user from laptop style to
tablet style.
This does not add any auto-detection, yet. It only makes 'set-chassis'
accept 'convertible' as valid input.
Unit systemd-coredump@1-3854-0.service is failed/failed, not counting it.
TIME PID UID GID SIG COREFILE EXE
Fri 2017-02-24 11:11:00 EST 10002 1000 1000 6 none /home/zbyszek/src/systemd-work/.libs/lt-Sat 2017-02-25 00:49:32 EST 26921 0 0 11 error /usr/libexec/fprintd
Sat 2017-02-25 11:56:30 EST 30703 1000 1000 - - /usr/bin/python3.5
Sat 2017-02-25 13:16:54 EST 3275 1000 1000 11 present /usr/bin/bash
Sat 2017-02-25 17:25:40 EST 4049 1000 1000 11 truncated /usr/bin/bash
For info and gdb output, the filename is marked in red and "(truncated)" is
appended. (Red is necessary because the annotation is hard to see when running
under a pager.)
Fixed#3883.
This patch add supports to configure IFLA_VXLAN_LOCAL
and IFLA_VXLAN_GROUP.
The "Group" is renamed to "Remote" which is a multicast address.`
```
Description=vxlan-test
Name=vxlan1
Kind=vxlan
[VXLAN]
Id=33
Local=2001:db8:2f4:4bff:fa71:1a56
Remote=FF02:0:0:0:0:0:1:9
```
output
```
ip -d link show vxlan1
16: vxlan1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1430 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/ether fe:b4:97:03:f8:e5 brd ff:ff:ff:ff:ff:ff promiscuity 0
vxlan id 33 group ff02::1:9 local 2001:db8:02f4:4bff:fa71:1a56 dev enp0s3 srcport 0 0 dstport 8472 ageing 300 noudpcsum noudp6zerocsumtx noudp6zerocsumrx addrgenmode none numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535
```
This updates the man page for the changes introduced in 1d84ad944520fc3e062ef518c4db4e1d3a1866af.
"=" is kep if the option is predominantly used with an argument, and dropped
otherwise.
v2:
- update also description of log_color
- drop '=' in all cases where it is optional
(previous rule of dropping it only in some cases was just too arbitrary.)
Sometimes it's useful to provide a default value during an environment
expansion, if the environment variable isn't already set.
For instance $XDG_DATA_DIRS is suppose to default to:
/usr/local/share/:/usr/share/
if it's not yet set. That means callers wishing to augment
XDG_DATA_DIRS need to manually add those two values.
This commit changes replace_env to support the following shell
compatible default value syntax:
XDG_DATA_DIRS=/foo:${XDG_DATA_DIRS:-/usr/local/share/:/usr/share}
Likewise, it's useful to provide an alternate value during an
environment expansion, if the environment variable isn't already set.
For instance, $LD_LIBRARY_PATH will inadvertently search the current
working directory if it starts or ends with a colon, so the following
is usually wrong:
LD_LIBRARY_PATH=/foo/lib:${LD_LIBRARY_PATH}
To address that, this changes replace_env to support the following
shell compatible alternate value syntax:
LD_LIBRARY_PATH=/foo/lib${LD_LIBRARY_PATH:+:${LD_LIBRARY_PATH}}
[zj: gate the new syntax under REPLACE_ENV_ALLOW_EXTENDED switch, so
existing callers are not modified.]
In the future we might want to allow additional syntax (for example
"unset VAR". But let's check that the data we're getting does not contain
anything unexpected.
(Only in environment.d files.)
We have only basic compatibility with shell syntax, but specifying variables
without using braces is probably more common, and I think a lot of people would
be surprised if this didn't work.
Add support for /etc/environment and document the changes to the user manager
to automatically import environment *.conf files from:
~/.config/environment.d/
/etc/environment.d/
/run/environment.d/
/usr/local/lib/environment.d/
/usr/lib/environment.d/
/etc/environment
