IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
GIT_VERSION is not available as a config.h variable, because it's rendered
into version.h during builds. Let's rework jinja2 rendering to also
parse version.h. No functional change, the new variable is so far unused.
I guess this will make partial rebuilds a bit slower, but it's useful
to be able to use the full version string.
Currently, running "meson build" followed by "meson test -C build"
will result in many failed tests due to missing dependencies. This
commit adds the missing dependencies to make sure no tests fail.
When using "capture : true" in custom_target()s the mode of the source
file is not preserved when the generated file is not installed and so
needs to be tweaked manually. Switch from output capture to creating the
target file and copy the permissions from the input file.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
This undoes part of 4c890ad3cc: the
implementations of update-dbus-docs and update-man-rules are moved back to
man/meson.build, and alias_target() is used to keep the visible target names
unchanged.
The rules for man pages are reworked so that it's possible to invoke the
targets even if xstlproc is not available. After all, xsltproc is only needed
for the final formatted output, and not other processing.
This doesn't matter too much, but makes things a bit more consistent.
A minor advantage is that the file is not a configuration file for meson
anymore, so:
a) It is not built unless pulled in by another target. Since
we don't usually build man pages by default, this saves a tiny
amount of work.
b) When the .in file is updated, meson does not reconfigure everything,
but just rebuilds the dependent targets.
Now that the conversion is finished, time for benchmarking:
a full build with default settings (and -Dstandalonebinaries=true), yields
before this pull request: 1687 targets, 148.13s user 35.17s system 317% cpu 57.697 total
with the full pull request: 1714 targets, 143.07s user 27.87s system 314% cpu 54.369 total
The difference doesn't seem significant. Partial rebuilds might be faster as
mentioned before.
I want to stop using 'substs'. But in this case, configure_file() is nicer
than custom_target(), because it causes meson to immediately generate the
helpers after configuration, so it's possible to do
'meson build && build/man/man ...', without building anything first.
We only substitute one variable here, so let's use a custom configuration_data()
object.
Meson 0.58 has gotten quite bad with emitting a message every time
a quoted command is used:
Program /home/zbyszek/src/systemd-work/tools/meson-make-symlink.sh found: YES (/home/zbyszek/src/systemd-work/tools/meson-make-symlink.sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program xsltproc found: YES (/usr/bin/xsltproc)
Configuring custom-entities.ent using configuration
Message: Skipping bootctl.1 because ENABLE_EFI is false
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Message: Skipping journal-remote.conf.5 because HAVE_MICROHTTPD is false
Message: Skipping journal-upload.conf.5 because HAVE_MICROHTTPD is false
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Message: Skipping loader.conf.5 because ENABLE_EFI is false
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
...
Let's suffer one message only for each command. Hopefully we can silence
even this when https://github.com/mesonbuild/meson/issues/8642 is
resolved.
Very old versions of meson did not include the subdirectory name in the
target name, so we started adding various "top-level" custom targets in
subdirectories. This was nice because the main meson.build file wasn't
as cluttered. But then meson started including the subdir name in the
target name. So let's move the definition to the root so we can have all
targets named uniformly.
Until now, update-man-rules assumed that the build directory was
a subdirectory of the project directory. When using mkosi, this is
not the case. We use find instead of git ls-files because git ls-files
does not seem to support outputting absolute paths.
Also, this makes update-man-rules a bit more user-friendly as new manpages
don't have to be added to the git staging area before they are processed by
update-man-rules.py.
This makes use of the developer mode switch: the test is only done
if the user opted-in into developer mode.
Before the man/update-dbus-docs was using the argument form where
we don't need to run find_command(), but that doesn't work with test(),,
so find_command() is used and we get one more line in the config log.
In the beginning, it was rather short, and reasonable to include inline.
Now it is long and unwieldy, let's split it out.
While at it, let's reindent and wrap using our current standards.
The name of the helper didn't match the name of the meson target, which was
always confusing me. With this change, we consistenly use "update" to
re-generate things which we otherwise keep in vc, and "make" for things
which are generated during each build.
The value is obviously bogus, but didn't seem to cause problems so far.
With meson-0.52.0, it causes a hang. The number of aliases is always rather
small (usually just one or two, possibly up to a dozen in a few cases), so
even if this causes some looping, it is strange that it has such a huge impact.
But let's just remove it.
Fixes#13742.
Tested with meson-0.52.0-1.module_f31+6771+f5d842eb.noarch,
meson-0.51.1-1.fc29.noarch.
Man page generation is generally very slow. I prefer to use -Dman=false when
developing systemd, and only build specific pages when introducing changes.
Those two little helper tools make it easy:
$ build/man/man systemd.link
$ build/man/html systemd.link
will show systemd.link.8 and systemd.link.html from the build directory build/.
Meson does not care either way, so let's use the simpler syntax. And files()
already gives a list, so nesting this in a list wouldn't be necessary even
if meson did not flatten everything.
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
I want to configure -Dman=false for speed, but be able to build a specific
man page sometimes to check my edits. Commit 5b316b9ea6 broke this by mistake.
Let's adjust the condition to better match the logic of disabling tests only
if xsltproc is really not found.
So far I avoided adding license headers to meson files, but they are pretty
big and important and should carry license headers like everything else.
I added my own copyright, even though other people modified those files too.
But this is mostly symbolic, so I hope that's OK.
The advantage is that is the name is mispellt, cpp will warn us.
$ git grep -Ee "conf.set\('(HAVE|ENABLE)_" -l|xargs sed -r -i "s/conf.set\('(HAVE|ENABLE)_/conf.set10('\1_/"
$ git grep -Ee '#ifn?def (HAVE|ENABLE)' -l|xargs sed -r -i 's/#ifdef (HAVE|ENABLE)/#if \1/; s/#ifndef (HAVE|ENABLE)/#if ! \1/;'
$ git grep -Ee 'if.*defined\(HAVE' -l|xargs sed -i -r 's/defined\((HAVE_[A-Z0-9_]*)\)/\1/g'
$ git grep -Ee 'if.*defined\(ENABLE' -l|xargs sed -i -r 's/defined\((ENABLE_[A-Z0-9_]*)\)/\1/g'
+ manual changes to meson.build
squash! build-sys: use #if Y instead of #ifdef Y everywhere
v2:
- fix incorrect setting of HAVE_LIBIDN2
some run_target() calls were using params from custom_target()
example message:
WARNING: Passed invalid keyword argument "input". This will become a hard error in the future.
New way to call targets:
ninja man/man
ninja man/html
ninja man/update-man-rules
Using conf.set() with a boolean argument does the right thing:
either #ifdef or #undef. This means that conf.set can be used unconditionally.
Previously I used '1' as the placeholder value, and that needs to be changed to
'true' for consistency (under meson 1 cannot be used in boolean context). All
checks need to be adjusted.
The symlinks should be created in the build directory in two cases: when
configuration specifies -Dhtml=true, or when ninja html target is built.
Normally install : {true,false} is used to decide if a target should be built,
but in this case, we cannot use install : true, because, as described in
488477d101, that results in the target file being copied into the
installation directory instead of a symlink. So we need a work-around. To
achieve the first end, the commands to create the symlinks are added as
dependencies of the command to create the html page. To the second end, they
are added as dependencies of the html target.
Follow-up for 488477d101 and 064d9ef0d7.
This adds two somewhat independent rules:
1. to create symlinks to html pages in the build directory
2. to create symlinks in the installation directory
The second part needs to be coded separately, because telling meson to install
the symlinks created in step 1. results in a copy of the target, instead of a
symlink. So step 2. needs to ignore the result of 1. and create the symlink again.
Fixes#5863.
The indentation for emacs'es meson-mode is added .dir-locals.
All files are reindented automatically, using the lasest meson-mode from git.
Indentation should now be fairly consistent.
This doesn't feel as natural, but is more consistent with the boolean options
which require true/false, and allows setting of options without knowing of
which type the option is.
